! Started logfile: /image_prod/ug002_uva//J0217-0121_S_dfm.log on Wed Mar 4 19:29:06 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0217-0121_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0217-0121_S_uva.fits ! AN table 1: 40 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0217-0121 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3360 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0217-0121_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.003724Jy sigma=7.815791 ! Fit after self-cal, rms=0.941937Jy sigma=7.331230 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.562 mas, bmaj=6.558 mas, bpa=-2.884 degrees ! Estimated noise=2.1835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466327 Jy ! Component: 100 - total flux cleaned = 0.0568707 Jy ! Total flux subtracted in 100 components = 0.0568707 Jy ! Clean residual min=-0.004445 max=0.004567 Jy/beam ! Clean residual mean=0.000005 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.0568707 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0568707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063885Jy sigma=0.464354 ! Fit after self-cal, rms=0.062746Jy sigma=0.455470 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=7.152 mas, bpa=-3.449 degrees ! Estimated noise=1.60403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433956 Jy ! Component: 100 - total flux cleaned = 0.00580985 Jy ! Component: 150 - total flux cleaned = 0.0064629 Jy ! Component: 200 - total flux cleaned = 0.00650124 Jy ! Total flux subtracted in 200 components = 0.00650124 Jy ! Clean residual min=-0.003317 max=0.004096 Jy/beam ! Clean residual mean=0.000005 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.0633719 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.0633719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062542Jy sigma=0.452792 ! Fit after self-cal, rms=0.062549Jy sigma=0.452775 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.918 x 7.152 at -3.449 degrees (North through East) ! Clean map min=-0.0031737 max=0.062094 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 HN 0.91 LA 0.99 MK 0.95 ! NL 1.04 OV 1.00 PT 0.95 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.03 LA 0.92 MK 1.03 ! NL 0.99 OV 0.93 PT 1.03 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 HN 1.03 LA 1.04 MK 1.06 ! NL 0.91 OV 0.97 PT 0.98 SC 0.94 ! ! ! Fit before self-cal, rms=0.062549Jy sigma=0.452775 ! Fit after self-cal, rms=0.064346Jy sigma=0.450493 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.193 mas, bpa=-3.226 degrees ! Estimated noise=1.59446 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000449716 Jy ! Component: 100 - total flux cleaned = -0.000538248 Jy ! Component: 150 - total flux cleaned = -0.000568029 Jy ! Component: 200 - total flux cleaned = -0.000595306 Jy ! Total flux subtracted in 200 components = -0.000595306 Jy ! Clean residual min=-0.003188 max=0.003060 Jy/beam ! Clean residual mean=0.000003 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0627766 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.0627766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064334Jy sigma=0.450447 ! Fit after self-cal, rms=0.064476Jy sigma=0.450282 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064476Jy sigma=0.450282 ! Fit after self-cal, rms=0.065333Jy sigma=0.448256 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=7.204 mas, bpa=-3.195 degrees ! Estimated noise=1.58967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147543 Jy ! Component: 100 - total flux cleaned = -0.000242033 Jy ! Component: 150 - total flux cleaned = -0.000265006 Jy ! Component: 200 - total flux cleaned = -0.000265071 Jy ! Total flux subtracted in 200 components = -0.000265071 Jy ! Clean residual min=-0.002914 max=0.002969 Jy/beam ! Clean residual mean=0.000001 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0625116 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0625116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065326Jy sigma=0.448233 ! Fit after self-cal, rms=0.065375Jy sigma=0.448124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-106.5, -96). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101698 Jy ! Component: 100 - total flux cleaned = 0.00114302 Jy ! Component: 150 - total flux cleaned = 0.00109861 Jy ! Component: 200 - total flux cleaned = 0.000933885 Jy ! Total flux subtracted in 200 components = 0.000933885 Jy ! Clean residual min=-0.002943 max=0.002391 Jy/beam ! Clean residual mean=0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0634454 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.0634454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065215Jy sigma=0.447020 ! Fit after self-cal, rms=0.065183Jy sigma=0.446858 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065183Jy sigma=0.446858 ! Fit after self-cal, rms=0.064745Jy sigma=0.446768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.184 mas, bpa=-3.032 degrees ! Estimated noise=1.5812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000586577 Jy ! Component: 100 - total flux cleaned = 0.000591104 Jy ! Component: 150 - total flux cleaned = 0.000480211 Jy ! Component: 200 - total flux cleaned = 0.000380189 Jy ! Total flux subtracted in 200 components = 0.000380189 Jy ! Clean residual min=-0.002955 max=0.002270 Jy/beam ! Clean residual mean=0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0638256 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.0638256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064681Jy sigma=0.446380 ! Fit after self-cal, rms=0.064669Jy sigma=0.446337 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120683 Jy ! Component: 100 - total flux cleaned = 5.48919e-05 Jy ! Component: 150 - total flux cleaned = -5.96842e-05 Jy ! Component: 200 - total flux cleaned = -0.000112345 Jy ! Total flux subtracted in 200 components = -0.000112345 Jy ! Clean residual min=-0.002989 max=0.002300 Jy/beam ! Clean residual mean=0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0637133 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.0637133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064638Jy sigma=0.446158 ! Fit after self-cal, rms=0.064632Jy sigma=0.446147 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064632Jy sigma=0.446147 ! Fit after self-cal, rms=0.064378Jy sigma=0.446103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.465 mas, bmaj=12.41 mas, bpa=-0.7941 degrees ! Estimated noise=2.05307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.03506e-05 Jy ! Component: 100 - total flux cleaned = -4.19043e-05 Jy ! Component: 150 - total flux cleaned = -6.60226e-05 Jy ! Component: 200 - total flux cleaned = -8.72932e-05 Jy ! Total flux subtracted in 200 components = -8.72932e-05 Jy ! Clean residual min=-0.002203 max=0.002043 Jy/beam ! Clean residual mean=0.000002 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.063626 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.063626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064369Jy sigma=0.446044 ! Fit after self-cal, rms=0.064374Jy sigma=0.446026 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.39926e-05 Jy ! Component: 100 - total flux cleaned = -0.000133683 Jy ! Component: 150 - total flux cleaned = -0.000133809 Jy ! Component: 200 - total flux cleaned = -0.000133791 Jy ! Total flux subtracted in 200 components = -0.000133791 Jy ! Clean residual min=-0.002183 max=0.001973 Jy/beam ! Clean residual mean=0.000002 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0634922 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.0634922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064372Jy sigma=0.446025 ! Fit after self-cal, rms=0.064375Jy sigma=0.446017 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.178 mas, bpa=-2.971 degrees ! Estimated noise=1.5758 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.917 x 7.178 at -2.971 degrees (North through East) ! Clean map min=-0.0033183 max=0.061611 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=6.569 mas, bpa=-2.353 degrees ! Estimated noise=2.15002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466893 Jy ! Component: 100 - total flux cleaned = 0.0572728 Jy ! Component: 150 - total flux cleaned = 0.0589592 Jy ! Component: 200 - total flux cleaned = 0.0600162 Jy ! Total flux subtracted in 200 components = 0.0600162 Jy ! Clean residual min=-0.003716 max=0.003449 Jy/beam ! Clean residual mean=0.000002 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0600162 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0600162 Jy ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.178 mas, bpa=-2.971 degrees ! Estimated noise=1.5758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226551 Jy ! Component: 100 - total flux cleaned = 0.00273025 Jy ! Component: 150 - total flux cleaned = 0.00296483 Jy ! Component: 200 - total flux cleaned = 0.00312074 Jy ! Total flux subtracted in 200 components = 0.00312074 Jy ! Clean residual min=-0.002927 max=0.002546 Jy/beam ! Clean residual mean=0.000002 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0631369 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.0631369 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.465 mas, bmaj=12.41 mas, bpa=-0.7941 degrees ! Estimated noise=2.05307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601683 Jy ! Component: 100 - total flux cleaned = 0.000561811 Jy ! Component: 150 - total flux cleaned = 0.000590967 Jy ! Component: 200 - total flux cleaned = 0.000591171 Jy ! Total flux subtracted in 200 components = 0.000591171 Jy ! Clean residual min=-0.002094 max=0.002031 Jy/beam ! Clean residual mean=0.000002 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0637281 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.92518e-07 Jy ! Component: 100 - total flux cleaned = -4.86973e-07 Jy ! Component: 150 - total flux cleaned = -2.21804e-05 Jy ! Component: 200 - total flux cleaned = -2.25935e-05 Jy ! Total flux subtracted in 200 components = -2.25935e-05 Jy ! Clean residual min=-0.002067 max=0.001994 Jy/beam ! Clean residual mean=0.000002 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0637055 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.0637055 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=7.178 mas, bpa=-2.971 degrees ! Estimated noise=1.5758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.46512e-05 Jy ! Component: 100 - total flux cleaned = -2.58832e-05 Jy ! Component: 150 - total flux cleaned = -9.35207e-05 Jy ! Component: 200 - total flux cleaned = -0.000155586 Jy ! Total flux subtracted in 200 components = -0.000155586 Jy ! Clean residual min=-0.003077 max=0.002299 Jy/beam ! Clean residual mean=0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0635499 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.0635499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064410Jy sigma=0.446189 ! Fit after self-cal, rms=0.064417Jy sigma=0.446156 wmodel J0217-0121_S_map.mod ! Writing 68 model components to file: J0217-0121_S_map.mod wobs J0217-0121_S_uvs.fits ! Writing UV FITS file: J0217-0121_S_uvs.fits wwins J0217-0121_S_map.win ! wwins: Wrote 2 windows to J0217-0121_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106671 Jy ! Component: 100 - total flux cleaned = -0.00148744 Jy ! Component: 150 - total flux cleaned = -0.00199466 Jy ! Component: 200 - total flux cleaned = -0.00203199 Jy ! Component: 250 - total flux cleaned = -0.00221107 Jy ! Component: 300 - total flux cleaned = -0.00227888 Jy ! Component: 350 - total flux cleaned = -0.00231227 Jy ! Component: 400 - total flux cleaned = -0.00240958 Jy ! Component: 450 - total flux cleaned = -0.0024407 Jy ! Component: 500 - total flux cleaned = -0.00247116 Jy ! Component: 550 - total flux cleaned = -0.00244142 Jy ! Component: 600 - total flux cleaned = -0.00241249 Jy ! Component: 650 - total flux cleaned = -0.00238358 Jy ! Component: 700 - total flux cleaned = -0.00241219 Jy ! Component: 750 - total flux cleaned = -0.0023844 Jy ! Component: 800 - total flux cleaned = -0.00238487 Jy ! Component: 850 - total flux cleaned = -0.00233263 Jy ! Component: 900 - total flux cleaned = -0.00241078 Jy ! Component: 950 - total flux cleaned = -0.00235998 Jy ! Component: 1000 - total flux cleaned = -0.00243538 Jy ! Component: 1050 - total flux cleaned = -0.00241081 Jy ! Component: 1100 - total flux cleaned = -0.0023874 Jy ! Component: 1150 - total flux cleaned = -0.00248189 Jy ! Component: 1200 - total flux cleaned = -0.00248205 Jy ! Component: 1250 - total flux cleaned = -0.00245948 Jy ! Component: 1300 - total flux cleaned = -0.0024146 Jy ! Component: 1350 - total flux cleaned = -0.00243633 Jy ! Component: 1400 - total flux cleaned = -0.0023277 Jy ! Component: 1450 - total flux cleaned = -0.00224221 Jy ! Component: 1500 - total flux cleaned = -0.00213676 Jy ! Component: 1550 - total flux cleaned = -0.00205413 Jy ! Component: 1600 - total flux cleaned = -0.00207446 Jy ! Component: 1650 - total flux cleaned = -0.00195304 Jy ! Component: 1700 - total flux cleaned = -0.00189321 Jy ! Component: 1750 - total flux cleaned = -0.00179506 Jy ! Component: 1800 - total flux cleaned = -0.00173742 Jy ! Component: 1850 - total flux cleaned = -0.00169919 Jy ! Component: 1900 - total flux cleaned = -0.00166105 Jy ! Component: 1950 - total flux cleaned = -0.0015862 Jy ! Component: 2000 - total flux cleaned = -0.00158602 Jy ! Component: 2050 - total flux cleaned = -0.00151304 Jy ! Component: 2100 - total flux cleaned = -0.00153112 Jy ! Component: 2150 - total flux cleaned = -0.00149554 Jy ! Component: 2200 - total flux cleaned = -0.00144255 Jy ! Component: 2250 - total flux cleaned = -0.00140756 Jy ! Component: 2300 - total flux cleaned = -0.00137325 Jy ! Component: 2350 - total flux cleaned = -0.00135639 Jy ! Component: 2400 - total flux cleaned = -0.00135642 Jy ! Component: 2450 - total flux cleaned = -0.0013061 Jy ! Component: 2500 - total flux cleaned = -0.00128951 Jy ! Component: 2550 - total flux cleaned = -0.00122397 Jy ! Component: 2600 - total flux cleaned = -0.0013056 Jy ! Component: 2650 - total flux cleaned = -0.00132164 Jy ! Component: 2700 - total flux cleaned = -0.00133742 Jy ! Component: 2750 - total flux cleaned = -0.00130581 Jy ! Component: 2800 - total flux cleaned = -0.00132168 Jy ! Component: 2850 - total flux cleaned = -0.0013683 Jy ! Component: 2900 - total flux cleaned = -0.00129114 Jy ! Component: 2950 - total flux cleaned = -0.0012759 Jy ! Component: 3000 - total flux cleaned = -0.00129141 Jy ! Component: 3050 - total flux cleaned = -0.00138163 Jy ! Component: 3100 - total flux cleaned = -0.00141149 Jy ! Component: 3150 - total flux cleaned = -0.0014558 Jy ! Component: 3200 - total flux cleaned = -0.00145569 Jy ! Component: 3250 - total flux cleaned = -0.00148486 Jy ! Component: 3300 - total flux cleaned = -0.00151366 Jy ! Component: 3350 - total flux cleaned = -0.00151367 Jy ! Component: 3400 - total flux cleaned = -0.00152788 Jy ! Component: 3450 - total flux cleaned = -0.00157003 Jy ! Component: 3500 - total flux cleaned = -0.00154189 Jy ! Component: 3550 - total flux cleaned = -0.00156974 Jy ! Component: 3600 - total flux cleaned = -0.00158351 Jy ! Component: 3650 - total flux cleaned = -0.00163834 Jy ! Component: 3700 - total flux cleaned = -0.00166545 Jy ! Component: 3750 - total flux cleaned = -0.00170592 Jy ! Component: 3800 - total flux cleaned = -0.00169257 Jy ! Component: 3850 - total flux cleaned = -0.00174582 Jy ! Component: 3900 - total flux cleaned = -0.00177218 Jy ! Component: 3950 - total flux cleaned = -0.00177213 Jy ! Component: 4000 - total flux cleaned = -0.00178518 Jy ! Component: 4050 - total flux cleaned = -0.00181107 Jy ! Total flux subtracted in 4096 components = -0.00181108 Jy ! Clean residual min=-0.000734 max=0.000792 Jy/beam ! Clean residual mean=-0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0617388 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 316 components and 0.0617388 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0217-0121_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.917 x 7.178 at -2.971 degrees (North through East) ! Clean map min=-0.0028311 max=0.060554 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0217-0121_S_map.fits wmodel /image_prod/ug002_uva//J0217-0121_S_map.mod ! Writing 316 model components to file: /image_prod/ug002_uva//J0217-0121_S_map.mod wobs /image_prod/ug002_uva//J0217-0121_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0217-0121_S_uvs.fits wwins /image_prod/ug002_uva//J0217-0121_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0217-0121_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0605544 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224132 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1104 1.1104 2.2208 4.44161 8.88321 17.7664 35.5328 71.0657 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.06 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 270.172 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0217-0121_S_dfm.log closed on Wed Mar 4 19:29:10 2020