! Started logfile: /image_prod/ug002_uva//J0216-3247_S_dfm.log on Wed Mar  4 19:28:43 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0216-3247_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0216-3247_S_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.873889 visibilities/baseline/integration-bin.
! Found source: J0216-3247
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4719 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0216-3247_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042843Jy  sigma=5.843377
! Fit after  self-cal, rms=0.743018Jy  sigma=4.122555
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.563 mas, bmaj=6.735 mas, bpa=-1.786 degrees
! Estimated noise=2.67523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207751 Jy
! Component: 100  -  total flux cleaned = 0.253054 Jy
! Total flux subtracted in 100 components = 0.253054 Jy
! Clean residual min=-0.010183 max=0.018061 Jy/beam
! Clean residual mean=-0.000006 rms=0.003186 Jy/beam
! Combined flux in latest and established models = 0.253054 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.253054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104495Jy  sigma=0.487292
! Fit after  self-cal, rms=0.104487Jy  sigma=0.487276
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.084 mas, bmaj=8.023 mas, bpa=-2.485 degrees
! Estimated noise=1.90881 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38.5, 110.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189696 Jy
! Component: 100  -  total flux cleaned = 0.0275452 Jy
! Component: 150  -  total flux cleaned = 0.0292507 Jy
! Component: 200  -  total flux cleaned = 0.0296596 Jy
! Total flux subtracted in 200 components = 0.0296596 Jy
! Clean residual min=-0.008462 max=0.013012 Jy/beam
! Clean residual mean=0.000050 rms=0.002645 Jy/beam
! Combined flux in latest and established models = 0.282714 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.282714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100947Jy  sigma=0.464293
! Fit after  self-cal, rms=0.100680Jy  sigma=0.462115
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.084 x 8.023 at -2.485 degrees (North through East)
! Clean map  min=-0.0081694  max=0.26233 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.95     HN        1.22     KP        0.96     
!   LA        1.03     MK        0.96     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.36     FD        0.95     HN        1.24     KP        0.96     
!   LA        1.01     MK        0.95     NL        1.02     OV        0.95     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.95     HN        1.33     KP        0.96     
!   LA        1.01     MK        0.92     NL        1.06     OV        0.96     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.100680Jy  sigma=0.462115
! Fit after  self-cal, rms=0.113289Jy  sigma=0.442541
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.056 mas, bmaj=7.964 mas, bpa=-2.757 degrees
! Estimated noise=1.90289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145108 Jy
! Component: 100  -  total flux cleaned = 0.00156352 Jy
! Component: 150  -  total flux cleaned = 0.00165987 Jy
! Component: 200  -  total flux cleaned = 0.00166384 Jy
! Total flux subtracted in 200 components = 0.00166384 Jy
! Clean residual min=-0.007238 max=0.007222 Jy/beam
! Clean residual mean=0.000025 rms=0.001963 Jy/beam
! Combined flux in latest and established models = 0.284378 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 52 components and 0.284378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112901Jy  sigma=0.441861
! Fit after  self-cal, rms=0.113066Jy  sigma=0.441705
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113066Jy  sigma=0.441705
! Fit after  self-cal, rms=0.106694Jy  sigma=0.427176
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.05 mas, bmaj=7.99 mas, bpa=-3.002 degrees
! Estimated noise=1.92445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.59734e-05 Jy
! Component: 100  -  total flux cleaned = -0.000260266 Jy
! Component: 150  -  total flux cleaned = -0.000260544 Jy
! Component: 200  -  total flux cleaned = -0.000260149 Jy
! Total flux subtracted in 200 components = -0.000260149 Jy
! Clean residual min=-0.004873 max=0.004529 Jy/beam
! Clean residual mean=0.000017 rms=0.001224 Jy/beam
! Combined flux in latest and established models = 0.284118 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 75 components and 0.284118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106530Jy  sigma=0.426117
! Fit after  self-cal, rms=0.106558Jy  sigma=0.426023
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000552683 Jy
! Component: 100  -  total flux cleaned = -0.000497264 Jy
! Component: 150  -  total flux cleaned = -0.000448195 Jy
! Component: 200  -  total flux cleaned = -0.000495131 Jy
! Total flux subtracted in 200 components = -0.000495131 Jy
! Clean residual min=-0.004771 max=0.004348 Jy/beam
! Clean residual mean=0.000016 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.283622 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 89 components and 0.283622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106506Jy  sigma=0.425608
! Fit after  self-cal, rms=0.106502Jy  sigma=0.425583
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106502Jy  sigma=0.425583
! Fit after  self-cal, rms=0.102147Jy  sigma=0.421414
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.052 mas, bmaj=8 mas, bpa=-3.065 degrees
! Estimated noise=1.92152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00274553 Jy
! Component: 100  -  total flux cleaned = -0.00325599 Jy
! Component: 150  -  total flux cleaned = -0.00337817 Jy
! Component: 200  -  total flux cleaned = -0.0034858 Jy
! Total flux subtracted in 200 components = -0.0034858 Jy
! Clean residual min=-0.003782 max=0.003475 Jy/beam
! Clean residual mean=0.000004 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.280137 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 107 components and 0.280137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102006Jy  sigma=0.420683
! Fit after  self-cal, rms=0.101976Jy  sigma=0.420590
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000582655 Jy
! Component: 100  -  total flux cleaned = -0.000581724 Jy
! Component: 150  -  total flux cleaned = -0.000668915 Jy
! Component: 200  -  total flux cleaned = -0.000707701 Jy
! Total flux subtracted in 200 components = -0.000707701 Jy
! Clean residual min=-0.003606 max=0.003305 Jy/beam
! Clean residual mean=0.000003 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.279429 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 118 components and 0.279429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101921Jy  sigma=0.420350
! Fit after  self-cal, rms=0.101920Jy  sigma=0.420328
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101920Jy  sigma=0.420328
! Fit after  self-cal, rms=0.102040Jy  sigma=0.420075
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.458 mas, bmaj=23.2 mas, bpa=1.314 degrees
! Estimated noise=2.39678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00183337 Jy
! Component: 100  -  total flux cleaned = -0.00197225 Jy
! Component: 150  -  total flux cleaned = -0.00206769 Jy
! Component: 200  -  total flux cleaned = -0.00211556 Jy
! Total flux subtracted in 200 components = -0.00211556 Jy
! Clean residual min=-0.003233 max=0.003289 Jy/beam
! Clean residual mean=0.000003 rms=0.000958 Jy/beam
! Combined flux in latest and established models = 0.277313 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 135 components and 0.277313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102002Jy  sigma=0.419828
! Fit after  self-cal, rms=0.102000Jy  sigma=0.419762
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000536742 Jy
! Component: 100  -  total flux cleaned = -0.000560553 Jy
! Component: 150  -  total flux cleaned = -0.000539885 Jy
! Component: 200  -  total flux cleaned = -0.000558548 Jy
! Total flux subtracted in 200 components = -0.000558548 Jy
! Clean residual min=-0.003114 max=0.003184 Jy/beam
! Clean residual mean=0.000001 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.276755 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 142 components and 0.276755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101984Jy  sigma=0.419703
! Fit after  self-cal, rms=0.101983Jy  sigma=0.419685
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=8.006 mas, bpa=-3.104 degrees
! Estimated noise=1.91776 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.054 x 8.006 at -3.104 degrees (North through East)
! Clean map  min=-0.003448  max=0.26445 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.534 mas, bmaj=6.706 mas, bpa=-2.139 degrees
! Estimated noise=2.70725 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.210172 Jy
! Component: 100  -  total flux cleaned = 0.256003 Jy
! Component: 150  -  total flux cleaned = 0.267607 Jy
! Component: 200  -  total flux cleaned = 0.272117 Jy
! Total flux subtracted in 200 components = 0.272117 Jy
! Clean residual min=-0.005309 max=0.005574 Jy/beam
! Clean residual mean=-0.000005 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.272117 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.272117 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=8.006 mas, bpa=-3.104 degrees
! Estimated noise=1.91776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-37.5, 86).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367254 Jy
! Component: 100  -  total flux cleaned = 0.00407014 Jy
! Component: 150  -  total flux cleaned = 0.00414739 Jy
! Component: 200  -  total flux cleaned = 0.00415089 Jy
! Total flux subtracted in 200 components = 0.00415089 Jy
! Clean residual min=-0.003658 max=0.003260 Jy/beam
! Clean residual mean=-0.000002 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.276267 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 0.276268 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.458 mas, bmaj=23.2 mas, bpa=1.314 degrees
! Estimated noise=2.39678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159696 Jy
! Component: 100  -  total flux cleaned = 5.40095e-05 Jy
! Component: 150  -  total flux cleaned = -3.73518e-05 Jy
! Component: 200  -  total flux cleaned = -0.000155471 Jy
! Total flux subtracted in 200 components = -0.000155471 Jy
! Clean residual min=-0.003024 max=0.003368 Jy/beam
! Clean residual mean=-0.000003 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.276112 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.62172e-05 Jy
! Component: 100  -  total flux cleaned = -0.000159815 Jy
! Component: 150  -  total flux cleaned = -0.000245306 Jy
! Component: 200  -  total flux cleaned = -0.000299336 Jy
! Total flux subtracted in 200 components = -0.000299336 Jy
! Clean residual min=-0.003005 max=0.003395 Jy/beam
! Clean residual mean=-0.000005 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.275813 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.275813 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=8.006 mas, bpa=-3.104 degrees
! Estimated noise=1.91776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000317879 Jy
! Component: 100  -  total flux cleaned = -0.000254577 Jy
! Component: 150  -  total flux cleaned = -0.000146795 Jy
! Component: 200  -  total flux cleaned = -0.000241188 Jy
! Total flux subtracted in 200 components = -0.000241188 Jy
! Clean residual min=-0.003476 max=0.003238 Jy/beam
! Clean residual mean=-0.000004 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.275572 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 0.275572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101946Jy  sigma=0.419844
! Fit after  self-cal, rms=0.101927Jy  sigma=0.419699
wmodel J0216-3247_S_map.mod
! Writing 69 model components to file: J0216-3247_S_map.mod
wobs   J0216-3247_S_uvs.fits
! Writing UV FITS file: J0216-3247_S_uvs.fits
wwins  J0216-3247_S_map.win
! wwins: Wrote 3 windows to J0216-3247_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00041442 Jy
! Component: 100  -  total flux cleaned = -0.00068989 Jy
! Component: 150  -  total flux cleaned = -0.000949407 Jy
! Component: 200  -  total flux cleaned = -0.00124055 Jy
! Component: 250  -  total flux cleaned = -0.00142571 Jy
! Component: 300  -  total flux cleaned = -0.00156004 Jy
! Component: 350  -  total flux cleaned = -0.00177851 Jy
! Component: 400  -  total flux cleaned = -0.00194752 Jy
! Component: 450  -  total flux cleaned = -0.00211223 Jy
! Component: 500  -  total flux cleaned = -0.00211252 Jy
! Component: 550  -  total flux cleaned = -0.00211239 Jy
! Component: 600  -  total flux cleaned = -0.00214948 Jy
! Component: 650  -  total flux cleaned = -0.00211233 Jy
! Component: 700  -  total flux cleaned = -0.00218569 Jy
! Component: 750  -  total flux cleaned = -0.00222191 Jy
! Component: 800  -  total flux cleaned = -0.00222237 Jy
! Component: 850  -  total flux cleaned = -0.00218863 Jy
! Component: 900  -  total flux cleaned = -0.00225662 Jy
! Component: 950  -  total flux cleaned = -0.00229013 Jy
! Component: 1000  -  total flux cleaned = -0.00222459 Jy
! Component: 1050  -  total flux cleaned = -0.00216001 Jy
! Component: 1100  -  total flux cleaned = -0.00203311 Jy
! Component: 1150  -  total flux cleaned = -0.00200202 Jy
! Component: 1200  -  total flux cleaned = -0.00194018 Jy
! Component: 1250  -  total flux cleaned = -0.00187921 Jy
! Component: 1300  -  total flux cleaned = -0.00166768 Jy
! Component: 1350  -  total flux cleaned = -0.00157843 Jy
! Component: 1400  -  total flux cleaned = -0.00148992 Jy
! Component: 1450  -  total flux cleaned = -0.0014023 Jy
! Component: 1500  -  total flux cleaned = -0.00128698 Jy
! Component: 1550  -  total flux cleaned = -0.00120205 Jy
! Component: 1600  -  total flux cleaned = -0.00114586 Jy
! Component: 1650  -  total flux cleaned = -0.00106209 Jy
! Component: 1700  -  total flux cleaned = -0.000979637 Jy
! Component: 1750  -  total flux cleaned = -0.000979657 Jy
! Component: 1800  -  total flux cleaned = -0.000925435 Jy
! Component: 1850  -  total flux cleaned = -0.00087228 Jy
! Component: 1900  -  total flux cleaned = -0.000793733 Jy
! Component: 1950  -  total flux cleaned = -0.000767536 Jy
! Component: 2000  -  total flux cleaned = -0.000715795 Jy
! Component: 2050  -  total flux cleaned = -0.000690497 Jy
! Component: 2100  -  total flux cleaned = -0.000740916 Jy
! Component: 2150  -  total flux cleaned = -0.000616569 Jy
! Component: 2200  -  total flux cleaned = -0.000641318 Jy
! Component: 2250  -  total flux cleaned = -0.000665639 Jy
! Component: 2300  -  total flux cleaned = -0.000616955 Jy
! Component: 2350  -  total flux cleaned = -0.000568637 Jy
! Component: 2400  -  total flux cleaned = -0.000545114 Jy
! Component: 2450  -  total flux cleaned = -0.000497911 Jy
! Component: 2500  -  total flux cleaned = -0.000497617 Jy
! Component: 2550  -  total flux cleaned = -0.000474276 Jy
! Component: 2600  -  total flux cleaned = -0.00035942 Jy
! Component: 2650  -  total flux cleaned = -0.00033679 Jy
! Component: 2700  -  total flux cleaned = -0.000246618 Jy
! Component: 2750  -  total flux cleaned = -0.000268996 Jy
! Component: 2800  -  total flux cleaned = -0.000202448 Jy
! Component: 2850  -  total flux cleaned = -0.000158721 Jy
! Component: 2900  -  total flux cleaned = -9.35708e-05 Jy
! Component: 2950  -  total flux cleaned = -5.0784e-05 Jy
! Component: 3000  -  total flux cleaned = -5.06715e-05 Jy
! Component: 3050  -  total flux cleaned = 7.68443e-05 Jy
! Component: 3100  -  total flux cleaned = 7.68133e-05 Jy
! Component: 3150  -  total flux cleaned = 9.78186e-05 Jy
! Component: 3200  -  total flux cleaned = 0.000222082 Jy
! Component: 3250  -  total flux cleaned = 0.000201258 Jy
! Component: 3300  -  total flux cleaned = 0.000242268 Jy
! Component: 3350  -  total flux cleaned = 0.000384064 Jy
! Component: 3400  -  total flux cleaned = 0.000343844 Jy
! Component: 3450  -  total flux cleaned = 0.000363734 Jy
! Component: 3500  -  total flux cleaned = 0.000522206 Jy
! Component: 3550  -  total flux cleaned = 0.000502427 Jy
! Component: 3600  -  total flux cleaned = 0.000580543 Jy
! Component: 3650  -  total flux cleaned = 0.000541949 Jy
! Component: 3700  -  total flux cleaned = 0.000580608 Jy
! Component: 3750  -  total flux cleaned = 0.000656962 Jy
! Component: 3800  -  total flux cleaned = 0.000637869 Jy
! Component: 3850  -  total flux cleaned = 0.000675574 Jy
! Component: 3900  -  total flux cleaned = 0.000694434 Jy
! Component: 3950  -  total flux cleaned = 0.000731735 Jy
! Component: 4000  -  total flux cleaned = 0.00071313 Jy
! Component: 4050  -  total flux cleaned = 0.000749914 Jy
! Total flux subtracted in 4096 components = 0.000768207 Jy
! Clean residual min=-0.001157 max=0.001182 Jy/beam
! Clean residual mean=0.000002 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.27634 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 323 components and 0.27634 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0216-3247_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.054 x 8.006 at -3.104 degrees (North through East)
! Clean map  min=-0.0027615  max=0.26532 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0216-3247_S_map.fits
wmodel /image_prod/ug002_uva//J0216-3247_S_map.mod
! Writing 323 model components to file: /image_prod/ug002_uva//J0216-3247_S_map.mod
wobs   /image_prod/ug002_uva//J0216-3247_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0216-3247_S_uvs.fits
wwins  /image_prod/ug002_uva//J0216-3247_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0216-3247_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.265316 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000328659 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.371623 0.371623 0.743245 1.48649 2.97298 5.94596 11.8919 23.7839 47.5677 95.1354
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.265 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  807.27 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0216-3247_S_dfm.log closed on Wed Mar  4 19:28:47 2020