! Started logfile: /image_prod/ug002_uva//J0215+0524_S_dfm.log on Wed Mar 4 19:28:10 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0215+0524_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0215+0524_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.971759 visibilities/baseline/integration-bin. ! Found source: J0215+0524 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 6297 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0215+0524_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025744Jy sigma=7.663025 ! Fit after self-cal, rms=0.815210Jy sigma=6.088292 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=6.864 mas, bpa=-3.994 degrees ! Estimated noise=1.70073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146184 Jy ! Component: 100 - total flux cleaned = 0.178127 Jy ! Total flux subtracted in 100 components = 0.178127 Jy ! Clean residual min=-0.005722 max=0.009104 Jy/beam ! Clean residual mean=0.000002 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.178127 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.178127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079166Jy sigma=0.500697 ! Fit after self-cal, rms=0.079137Jy sigma=0.500452 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=7.605 mas, bpa=-3.12 degrees ! Estimated noise=1.23834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106508 Jy ! Component: 100 - total flux cleaned = 0.0166994 Jy ! Component: 150 - total flux cleaned = 0.0206821 Jy ! Component: 200 - total flux cleaned = 0.0233408 Jy ! Total flux subtracted in 200 components = 0.0233408 Jy ! Clean residual min=-0.005157 max=0.006310 Jy/beam ! Clean residual mean=-0.000001 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.201468 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 29 components and 0.201468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077612Jy sigma=0.487136 ! Fit after self-cal, rms=0.077649Jy sigma=0.487080 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 7.605 at -3.12 degrees (North through East) ! Clean map min=-0.0048473 max=0.18777 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.00 KP 0.98 ! LA 1.01 MK 1.02 NL 0.99 OV 0.99 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 1.01 KP 0.98 ! LA 1.02 MK 1.01 NL 1.05 OV 0.92 ! SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.08 KP 0.99 ! LA 1.02 MK 1.04 NL 1.01 OV 0.96 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.077649Jy sigma=0.487080 ! Fit after self-cal, rms=0.076416Jy sigma=0.480967 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=7.626 mas, bpa=-2.945 degrees ! Estimated noise=1.23239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167275 Jy ! Component: 100 - total flux cleaned = -0.00159923 Jy ! Component: 150 - total flux cleaned = -0.00146059 Jy ! Component: 200 - total flux cleaned = -0.00130161 Jy ! Total flux subtracted in 200 components = -0.00130161 Jy ! Clean residual min=-0.004580 max=0.005574 Jy/beam ! Clean residual mean=0.000002 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.200166 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.200166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076338Jy sigma=0.480571 ! Fit after self-cal, rms=0.076333Jy sigma=0.480499 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076333Jy sigma=0.480499 ! Fit after self-cal, rms=0.081838Jy sigma=0.460690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=7.585 mas, bpa=-3.143 degrees ! Estimated noise=1.23288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239563 Jy ! Component: 100 - total flux cleaned = -0.000286995 Jy ! Component: 150 - total flux cleaned = -0.000375194 Jy ! Component: 200 - total flux cleaned = -0.000491934 Jy ! Total flux subtracted in 200 components = -0.000491934 Jy ! Clean residual min=-0.002644 max=0.002460 Jy/beam ! Clean residual mean=0.000002 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.199675 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.199675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081763Jy sigma=0.460233 ! Fit after self-cal, rms=0.081902Jy sigma=0.460070 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226043 Jy ! Component: 100 - total flux cleaned = -0.000324764 Jy ! Component: 150 - total flux cleaned = -0.000414687 Jy ! Component: 200 - total flux cleaned = -0.000524689 Jy ! Total flux subtracted in 200 components = -0.000524689 Jy ! Clean residual min=-0.002633 max=0.002500 Jy/beam ! Clean residual mean=0.000002 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.19915 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.19915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081873Jy sigma=0.459894 ! Fit after self-cal, rms=0.081872Jy sigma=0.459889 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081872Jy sigma=0.459889 ! Fit after self-cal, rms=0.082930Jy sigma=0.459753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=7.576 mas, bpa=-3.151 degrees ! Estimated noise=1.23393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119491 Jy ! Component: 100 - total flux cleaned = 6.01616e-05 Jy ! Component: 150 - total flux cleaned = -2.17818e-05 Jy ! Component: 200 - total flux cleaned = -9.71273e-05 Jy ! Total flux subtracted in 200 components = -9.71273e-05 Jy ! Clean residual min=-0.002554 max=0.002502 Jy/beam ! Clean residual mean=0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.199053 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.199053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082904Jy sigma=0.459616 ! Fit after self-cal, rms=0.082909Jy sigma=0.459613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.91966e-05 Jy ! Component: 100 - total flux cleaned = -0.000143914 Jy ! Component: 150 - total flux cleaned = -0.000203286 Jy ! Component: 200 - total flux cleaned = -0.000257977 Jy ! Total flux subtracted in 200 components = -0.000257977 Jy ! Clean residual min=-0.002575 max=0.002526 Jy/beam ! Clean residual mean=0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.198795 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.198795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082896Jy sigma=0.459542 ! Fit after self-cal, rms=0.082896Jy sigma=0.459539 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082896Jy sigma=0.459539 ! Fit after self-cal, rms=0.083051Jy sigma=0.459519 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.2 mas, bmaj=11.11 mas, bpa=-3.499 degrees ! Estimated noise=1.46246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060157 Jy ! Component: 100 - total flux cleaned = 0.000525305 Jy ! Component: 150 - total flux cleaned = 0.000457062 Jy ! Component: 200 - total flux cleaned = 0.000438528 Jy ! Total flux subtracted in 200 components = 0.000438528 Jy ! Clean residual min=-0.002464 max=0.002391 Jy/beam ! Clean residual mean=0.000005 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.199233 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.199233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083061Jy sigma=0.459555 ! Fit after self-cal, rms=0.083060Jy sigma=0.459533 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.66473e-06 Jy ! Component: 100 - total flux cleaned = -2.77971e-05 Jy ! Component: 150 - total flux cleaned = -3.59742e-05 Jy ! Component: 200 - total flux cleaned = -5.15918e-05 Jy ! Total flux subtracted in 200 components = -5.15918e-05 Jy ! Clean residual min=-0.002444 max=0.002358 Jy/beam ! Clean residual mean=0.000005 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.199182 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.199182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083064Jy sigma=0.459545 ! Fit after self-cal, rms=0.083063Jy sigma=0.459533 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=7.574 mas, bpa=-3.172 degrees ! Estimated noise=1.23506 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.297 x 7.574 at -3.172 degrees (North through East) ! Clean map min=-0.0024935 max=0.18828 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=6.816 mas, bpa=-4.043 degrees ! Estimated noise=1.69684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145798 Jy ! Component: 100 - total flux cleaned = 0.177665 Jy ! Component: 150 - total flux cleaned = 0.186938 Jy ! Component: 200 - total flux cleaned = 0.191792 Jy ! Total flux subtracted in 200 components = 0.191792 Jy ! Clean residual min=-0.003639 max=0.003492 Jy/beam ! Clean residual mean=0.000002 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.191792 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.191792 Jy ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=7.574 mas, bpa=-3.172 degrees ! Estimated noise=1.23506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358552 Jy ! Component: 100 - total flux cleaned = 0.00570044 Jy ! Component: 150 - total flux cleaned = 0.0072349 Jy ! Component: 200 - total flux cleaned = 0.00796905 Jy ! Total flux subtracted in 200 components = 0.00796905 Jy ! Clean residual min=-0.002479 max=0.002406 Jy/beam ! Clean residual mean=0.000002 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.199762 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 53 components and 0.199762 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.2 mas, bmaj=11.11 mas, bpa=-3.499 degrees ! Estimated noise=1.46246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101661 Jy ! Component: 100 - total flux cleaned = 0.00123238 Jy ! Component: 150 - total flux cleaned = 0.0013274 Jy ! Component: 200 - total flux cleaned = 0.00137399 Jy ! Total flux subtracted in 200 components = 0.00137399 Jy ! Clean residual min=-0.002292 max=0.002204 Jy/beam ! Clean residual mean=0.000005 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.201136 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7517e-05 Jy ! Component: 100 - total flux cleaned = 6.40856e-05 Jy ! Component: 150 - total flux cleaned = 7.51281e-05 Jy ! Component: 200 - total flux cleaned = 7.48112e-05 Jy ! Total flux subtracted in 200 components = 7.48112e-05 Jy ! Clean residual min=-0.002288 max=0.002187 Jy/beam ! Clean residual mean=0.000005 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.20121 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 87 components and 0.20121 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=7.574 mas, bpa=-3.172 degrees ! Estimated noise=1.23506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303541 Jy ! Component: 100 - total flux cleaned = -0.000241215 Jy ! Component: 150 - total flux cleaned = -0.000297226 Jy ! Component: 200 - total flux cleaned = -0.000297134 Jy ! Total flux subtracted in 200 components = -0.000297134 Jy ! Clean residual min=-0.002465 max=0.002279 Jy/beam ! Clean residual mean=0.000002 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.200913 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.200913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083015Jy sigma=0.459121 ! Fit after self-cal, rms=0.082997Jy sigma=0.459024 wmodel J0215+0524_S_map.mod ! Writing 102 model components to file: J0215+0524_S_map.mod wobs J0215+0524_S_uvs.fits ! Writing UV FITS file: J0215+0524_S_uvs.fits wwins J0215+0524_S_map.win ! wwins: Wrote 2 windows to J0215+0524_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000784982 Jy ! Component: 100 - total flux cleaned = -0.00111115 Jy ! Component: 150 - total flux cleaned = -0.00137397 Jy ! Component: 200 - total flux cleaned = -0.00180543 Jy ! Component: 250 - total flux cleaned = -0.00215071 Jy ! Component: 300 - total flux cleaned = -0.0024183 Jy ! Component: 350 - total flux cleaned = -0.00271085 Jy ! Component: 400 - total flux cleaned = -0.00283793 Jy ! Component: 450 - total flux cleaned = -0.00308555 Jy ! Component: 500 - total flux cleaned = -0.00323579 Jy ! Component: 550 - total flux cleaned = -0.0034726 Jy ! Component: 600 - total flux cleaned = -0.00358876 Jy ! Component: 650 - total flux cleaned = -0.00373124 Jy ! Component: 700 - total flux cleaned = -0.00384421 Jy ! Component: 750 - total flux cleaned = -0.003927 Jy ! Component: 800 - total flux cleaned = -0.00411768 Jy ! Component: 850 - total flux cleaned = -0.00419823 Jy ! Component: 900 - total flux cleaned = -0.00438281 Jy ! Component: 950 - total flux cleaned = -0.00448665 Jy ! Component: 1000 - total flux cleaned = -0.0046151 Jy ! Component: 1050 - total flux cleaned = -0.00466606 Jy ! Component: 1100 - total flux cleaned = -0.00476569 Jy ! Component: 1150 - total flux cleaned = -0.00478995 Jy ! Component: 1200 - total flux cleaned = -0.00486275 Jy ! Component: 1250 - total flux cleaned = -0.00495814 Jy ! Component: 1300 - total flux cleaned = -0.00495796 Jy ! Component: 1350 - total flux cleaned = -0.00505075 Jy ! Component: 1400 - total flux cleaned = -0.00511928 Jy ! Component: 1450 - total flux cleaned = -0.00507414 Jy ! Component: 1500 - total flux cleaned = -0.00514106 Jy ! Component: 1550 - total flux cleaned = -0.00514082 Jy ! Component: 1600 - total flux cleaned = -0.00520599 Jy ! Component: 1650 - total flux cleaned = -0.00518413 Jy ! Component: 1700 - total flux cleaned = -0.00518406 Jy ! Component: 1750 - total flux cleaned = -0.0052895 Jy ! Component: 1800 - total flux cleaned = -0.00531017 Jy ! Component: 1850 - total flux cleaned = -0.00531011 Jy ! Component: 1900 - total flux cleaned = -0.00539151 Jy ! Component: 1950 - total flux cleaned = -0.00545184 Jy ! Component: 2000 - total flux cleaned = -0.00555145 Jy ! Component: 2050 - total flux cleaned = -0.00551186 Jy ! Component: 2100 - total flux cleaned = -0.00564915 Jy ! Component: 2150 - total flux cleaned = -0.00572665 Jy ! Component: 2200 - total flux cleaned = -0.00582237 Jy ! Component: 2250 - total flux cleaned = -0.0058602 Jy ! Component: 2300 - total flux cleaned = -0.00593569 Jy ! Component: 2350 - total flux cleaned = -0.0060477 Jy ! Component: 2400 - total flux cleaned = -0.00612188 Jy ! Component: 2450 - total flux cleaned = -0.00625016 Jy ! Component: 2500 - total flux cleaned = -0.00625012 Jy ! Component: 2550 - total flux cleaned = -0.00634025 Jy ! Component: 2600 - total flux cleaned = -0.00641162 Jy ! Component: 2650 - total flux cleaned = -0.00644719 Jy ! Component: 2700 - total flux cleaned = -0.00655256 Jy ! Component: 2750 - total flux cleaned = -0.00662214 Jy ! Component: 2800 - total flux cleaned = -0.00670851 Jy ! Component: 2850 - total flux cleaned = -0.00675986 Jy ! Component: 2900 - total flux cleaned = -0.00681076 Jy ! Component: 2950 - total flux cleaned = -0.00687826 Jy ! Component: 3000 - total flux cleaned = -0.00696177 Jy ! Component: 3050 - total flux cleaned = -0.00704457 Jy ! Component: 3100 - total flux cleaned = -0.00709362 Jy ! Component: 3150 - total flux cleaned = -0.00710983 Jy ! Component: 3200 - total flux cleaned = -0.00717457 Jy ! Component: 3250 - total flux cleaned = -0.00714226 Jy ! Component: 3300 - total flux cleaned = -0.00717409 Jy ! Component: 3350 - total flux cleaned = -0.00723737 Jy ! Component: 3400 - total flux cleaned = -0.00733154 Jy ! Component: 3450 - total flux cleaned = -0.00739362 Jy ! Component: 3500 - total flux cleaned = -0.00747084 Jy ! Component: 3550 - total flux cleaned = -0.00751673 Jy ! Component: 3600 - total flux cleaned = -0.00762335 Jy ! Component: 3650 - total flux cleaned = -0.00762344 Jy ! Component: 3700 - total flux cleaned = -0.00768352 Jy ! Component: 3750 - total flux cleaned = -0.00774325 Jy ! Component: 3800 - total flux cleaned = -0.00783208 Jy ! Component: 3850 - total flux cleaned = -0.00780266 Jy ! Component: 3900 - total flux cleaned = -0.00794885 Jy ! Component: 3950 - total flux cleaned = -0.00799232 Jy ! Component: 4000 - total flux cleaned = -0.00797806 Jy ! Component: 4050 - total flux cleaned = -0.00806427 Jy ! Total flux subtracted in 4096 components = -0.00812123 Jy ! Clean residual min=-0.000936 max=0.000803 Jy/beam ! Clean residual mean=0.000001 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.192792 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 403 components and 0.192792 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0215+0524_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.297 x 7.574 at -3.172 degrees (North through East) ! Clean map min=-0.0018117 max=0.18804 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0215+0524_S_map.fits wmodel /image_prod/ug002_uva//J0215+0524_S_map.mod ! Writing 403 model components to file: /image_prod/ug002_uva//J0215+0524_S_map.mod wobs /image_prod/ug002_uva//J0215+0524_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0215+0524_S_uvs.fits wwins /image_prod/ug002_uva//J0215+0524_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0215+0524_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.188036 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254011 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.405259 0.405259 0.810519 1.62104 3.24207 6.48415 12.9683 25.9366 51.8732 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.188 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 740.266 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0215+0524_S_dfm.log closed on Wed Mar 4 19:28:14 2020