! Started logfile: /image_prod/ug002_uva//J0213+8717_S_dfm.log on Wed Mar 4 19:27:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0213+8717_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0213+8717_S_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983333 visibilities/baseline/integration-bin. ! Found source: J0213+8717 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7965 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0213+8717_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.035584Jy sigma=7.253454 ! Fit after self-cal, rms=0.771179Jy sigma=5.503359 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=4.151 mas, bpa=-28.39 degrees ! Estimated noise=1.66431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178134 Jy ! Component: 100 - total flux cleaned = 0.216978 Jy ! Total flux subtracted in 100 components = 0.216978 Jy ! Clean residual min=-0.006022 max=0.010835 Jy/beam ! Clean residual mean=-0.000025 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.216978 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.216978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108264Jy sigma=0.495802 ! Fit after self-cal, rms=0.108260Jy sigma=0.495783 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866031 Jy ! Component: 100 - total flux cleaned = 0.0100743 Jy ! Total flux subtracted in 100 components = 0.0100743 Jy ! Clean residual min=-0.006049 max=0.006686 Jy/beam ! Clean residual mean=-0.000015 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.227053 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.227053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.106962Jy sigma=0.492695 ! Fit after self-cal, rms=0.106959Jy sigma=0.492641 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=5.065 mas, bpa=-35.48 degrees ! Estimated noise=1.15423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000779946 Jy ! Component: 100 - total flux cleaned = 0.000930368 Jy ! Component: 150 - total flux cleaned = 0.000972281 Jy ! Component: 200 - total flux cleaned = 0.0010071 Jy ! Total flux subtracted in 200 components = 0.0010071 Jy ! Clean residual min=-0.005533 max=0.005723 Jy/beam ! Clean residual mean=-0.000022 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.22806 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.22806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.106844Jy sigma=0.492605 ! Fit after self-cal, rms=0.106840Jy sigma=0.492587 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.662 x 5.065 at -35.48 degrees (North through East) ! Clean map min=-0.0053301 max=0.22809 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.99 HN 1.01 KP 0.98 ! LA 1.01 MK 1.03 NL 0.95 OV 0.99 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00 HN 1.02 KP 0.95 ! LA 0.99 MK 1.04 NL 0.99 OV 1.08 ! PT 0.98 SC 0.68 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.01 HN 1.00 KP 1.01 ! LA 0.99 MK 1.01 NL 1.03 OV 0.97 ! PT 1.00 SC 1.03 ! ! ! Fit before self-cal, rms=0.106840Jy sigma=0.492587 ! Fit after self-cal, rms=0.088144Jy sigma=0.470437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.629 mas, bmaj=5.053 mas, bpa=-35.68 degrees ! Estimated noise=1.16296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275968 Jy ! Component: 100 - total flux cleaned = 0.00390179 Jy ! Component: 150 - total flux cleaned = 0.00410956 Jy ! Component: 200 - total flux cleaned = 0.00413849 Jy ! Total flux subtracted in 200 components = 0.00413849 Jy ! Clean residual min=-0.004191 max=0.004327 Jy/beam ! Clean residual mean=-0.000000 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.232198 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.232198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087982Jy sigma=0.470166 ! Fit after self-cal, rms=0.087957Jy sigma=0.470056 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087957Jy sigma=0.470056 ! Fit after self-cal, rms=0.080225Jy sigma=0.437790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=5.009 mas, bpa=-36.13 degrees ! Estimated noise=1.16166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152597 Jy ! Component: 100 - total flux cleaned = 0.00173369 Jy ! Component: 150 - total flux cleaned = 0.00178725 Jy ! Component: 200 - total flux cleaned = 0.00185748 Jy ! Total flux subtracted in 200 components = 0.00185748 Jy ! Clean residual min=-0.002321 max=0.002371 Jy/beam ! Clean residual mean=-0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.234056 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.234056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080187Jy sigma=0.437556 ! Fit after self-cal, rms=0.080164Jy sigma=0.437391 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-76.5, -125). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022725 Jy ! Component: 100 - total flux cleaned = 0.00244726 Jy ! Component: 150 - total flux cleaned = 0.00249002 Jy ! Component: 200 - total flux cleaned = 0.00255884 Jy ! Total flux subtracted in 200 components = 0.00255884 Jy ! Clean residual min=-0.002294 max=0.002210 Jy/beam ! Clean residual mean=-0.000001 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.236615 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.236615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080081Jy sigma=0.436795 ! Fit after self-cal, rms=0.080078Jy sigma=0.436763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080078Jy sigma=0.436763 ! Fit after self-cal, rms=0.080170Jy sigma=0.436660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=4.993 mas, bpa=-36.1 degrees ! Estimated noise=1.16283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128045 Jy ! Component: 100 - total flux cleaned = 0.0016495 Jy ! Component: 150 - total flux cleaned = 0.00180847 Jy ! Component: 200 - total flux cleaned = 0.00192306 Jy ! Total flux subtracted in 200 components = 0.00192306 Jy ! Clean residual min=-0.002288 max=0.002153 Jy/beam ! Clean residual mean=-0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.238538 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.238538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080135Jy sigma=0.436440 ! Fit after self-cal, rms=0.080132Jy sigma=0.436434 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014123 Jy ! Component: 100 - total flux cleaned = 0.000215116 Jy ! Component: 150 - total flux cleaned = 0.000238249 Jy ! Component: 200 - total flux cleaned = 0.000259675 Jy ! Total flux subtracted in 200 components = 0.000259675 Jy ! Clean residual min=-0.002314 max=0.002147 Jy/beam ! Clean residual mean=-0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.238797 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.238797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080118Jy sigma=0.436343 ! Fit after self-cal, rms=0.080118Jy sigma=0.436343 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080118Jy sigma=0.436343 ! Fit after self-cal, rms=0.080240Jy sigma=0.436279 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.04 mas, bmaj=10.06 mas, bpa=-38.65 degrees ! Estimated noise=1.48248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000928577 Jy ! Component: 100 - total flux cleaned = 0.00115321 Jy ! Component: 150 - total flux cleaned = 0.00120199 Jy ! Component: 200 - total flux cleaned = 0.00123988 Jy ! Total flux subtracted in 200 components = 0.00123988 Jy ! Clean residual min=-0.002490 max=0.001843 Jy/beam ! Clean residual mean=-0.000002 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.240037 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.240037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080236Jy sigma=0.436249 ! Fit after self-cal, rms=0.080233Jy sigma=0.436238 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157738 Jy ! Component: 100 - total flux cleaned = 0.000147435 Jy ! Component: 150 - total flux cleaned = 0.000138447 Jy ! Component: 200 - total flux cleaned = 0.000129728 Jy ! Total flux subtracted in 200 components = 0.000129728 Jy ! Clean residual min=-0.002508 max=0.001874 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.240167 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.240167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080233Jy sigma=0.436243 ! Fit after self-cal, rms=0.080233Jy sigma=0.436242 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=4.98 mas, bpa=-36.08 degrees ! Estimated noise=1.16458 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 4.98 at -36.08 degrees (North through East) ! Clean map min=-0.0022858 max=0.22943 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=4.089 mas, bpa=-29.59 degrees ! Estimated noise=1.66756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178495 Jy ! Component: 100 - total flux cleaned = 0.217459 Jy ! Component: 150 - total flux cleaned = 0.226903 Jy ! Component: 200 - total flux cleaned = 0.230949 Jy ! Total flux subtracted in 200 components = 0.230949 Jy ! Clean residual min=-0.003281 max=0.002716 Jy/beam ! Clean residual mean=-0.000010 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.230949 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.230949 Jy ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=4.98 mas, bpa=-36.08 degrees ! Estimated noise=1.16458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035884 Jy ! Component: 100 - total flux cleaned = 0.00585331 Jy ! Component: 150 - total flux cleaned = 0.00710401 Jy ! Component: 200 - total flux cleaned = 0.00762884 Jy ! Total flux subtracted in 200 components = 0.00762884 Jy ! Clean residual min=-0.002235 max=0.002053 Jy/beam ! Clean residual mean=-0.000004 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.238578 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 38 components and 0.238578 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.04 mas, bmaj=10.06 mas, bpa=-38.65 degrees ! Estimated noise=1.48248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124182 Jy ! Component: 100 - total flux cleaned = 0.00156837 Jy ! Component: 150 - total flux cleaned = 0.00161406 Jy ! Component: 200 - total flux cleaned = 0.00161434 Jy ! Total flux subtracted in 200 components = 0.00161434 Jy ! Clean residual min=-0.002430 max=0.001851 Jy/beam ! Clean residual mean=-0.000002 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.240192 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.57673e-05 Jy ! Component: 100 - total flux cleaned = 3.41489e-05 Jy ! Component: 150 - total flux cleaned = 3.39144e-05 Jy ! Component: 200 - total flux cleaned = 4.69181e-05 Jy ! Total flux subtracted in 200 components = 4.69181e-05 Jy ! Clean residual min=-0.002473 max=0.001843 Jy/beam ! Clean residual mean=-0.000002 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.240239 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.240239 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=4.98 mas, bpa=-36.08 degrees ! Estimated noise=1.16458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.58819e-05 Jy ! Component: 100 - total flux cleaned = -0.000132966 Jy ! Component: 150 - total flux cleaned = -0.000164274 Jy ! Component: 200 - total flux cleaned = -0.000162874 Jy ! Total flux subtracted in 200 components = -0.000162874 Jy ! Clean residual min=-0.002397 max=0.002090 Jy/beam ! Clean residual mean=-0.000002 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.240076 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.240076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080211Jy sigma=0.436142 ! Fit after self-cal, rms=0.080207Jy sigma=0.436106 wmodel J0213+8717_S_map.mod ! Writing 79 model components to file: J0213+8717_S_map.mod wobs J0213+8717_S_uvs.fits ! Writing UV FITS file: J0213+8717_S_uvs.fits wwins J0213+8717_S_map.win ! wwins: Wrote 3 windows to J0213+8717_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117912 Jy ! Component: 100 - total flux cleaned = -0.00015494 Jy ! Component: 150 - total flux cleaned = 4.15041e-05 Jy ! Component: 200 - total flux cleaned = 0.000105424 Jy ! Component: 250 - total flux cleaned = 0.000258189 Jy ! Component: 300 - total flux cleaned = 0.000406399 Jy ! Component: 350 - total flux cleaned = 0.000521961 Jy ! Component: 400 - total flux cleaned = 0.000549816 Jy ! Component: 450 - total flux cleaned = 0.000577521 Jy ! Component: 500 - total flux cleaned = 0.000577137 Jy ! Component: 550 - total flux cleaned = 0.000603524 Jy ! Component: 600 - total flux cleaned = 0.000576907 Jy ! Component: 650 - total flux cleaned = 0.000576796 Jy ! Component: 700 - total flux cleaned = 0.000474326 Jy ! Component: 750 - total flux cleaned = 0.000550414 Jy ! Component: 800 - total flux cleaned = 0.000549927 Jy ! Component: 850 - total flux cleaned = 0.000500746 Jy ! Component: 900 - total flux cleaned = 0.000574162 Jy ! Component: 950 - total flux cleaned = 0.00067014 Jy ! Component: 1000 - total flux cleaned = 0.000598323 Jy ! Component: 1050 - total flux cleaned = 0.000645776 Jy ! Component: 1100 - total flux cleaned = 0.00069273 Jy ! Component: 1150 - total flux cleaned = 0.000739026 Jy ! Component: 1200 - total flux cleaned = 0.00073922 Jy ! Component: 1250 - total flux cleaned = 0.00083023 Jy ! Component: 1300 - total flux cleaned = 0.000830099 Jy ! Component: 1350 - total flux cleaned = 0.000852398 Jy ! Component: 1400 - total flux cleaned = 0.000941117 Jy ! Component: 1450 - total flux cleaned = 0.000962987 Jy ! Component: 1500 - total flux cleaned = 0.00109307 Jy ! Component: 1550 - total flux cleaned = 0.00115759 Jy ! Component: 1600 - total flux cleaned = 0.00113647 Jy ! Component: 1650 - total flux cleaned = 0.00132663 Jy ! Component: 1700 - total flux cleaned = 0.00132648 Jy ! Component: 1750 - total flux cleaned = 0.00147215 Jy ! Component: 1800 - total flux cleaned = 0.00153412 Jy ! Component: 1850 - total flux cleaned = 0.00165688 Jy ! Component: 1900 - total flux cleaned = 0.00159598 Jy ! Component: 1950 - total flux cleaned = 0.00171694 Jy ! Component: 2000 - total flux cleaned = 0.00181688 Jy ! Component: 2050 - total flux cleaned = 0.0019159 Jy ! Component: 2100 - total flux cleaned = 0.00191601 Jy ! Component: 2150 - total flux cleaned = 0.00197481 Jy ! Component: 2200 - total flux cleaned = 0.0020523 Jy ! Component: 2250 - total flux cleaned = 0.00212901 Jy ! Component: 2300 - total flux cleaned = 0.00212908 Jy ! Component: 2350 - total flux cleaned = 0.00214826 Jy ! Component: 2400 - total flux cleaned = 0.00222376 Jy ! Component: 2450 - total flux cleaned = 0.00222332 Jy ! Component: 2500 - total flux cleaned = 0.00227904 Jy ! Component: 2550 - total flux cleaned = 0.0023711 Jy ! Component: 2600 - total flux cleaned = 0.00237093 Jy ! Component: 2650 - total flux cleaned = 0.0024253 Jy ! Component: 2700 - total flux cleaned = 0.00249759 Jy ! Component: 2750 - total flux cleaned = 0.00246164 Jy ! Component: 2800 - total flux cleaned = 0.00249717 Jy ! Component: 2850 - total flux cleaned = 0.00258574 Jy ! Component: 2900 - total flux cleaned = 0.00262071 Jy ! Component: 2950 - total flux cleaned = 0.00258594 Jy ! Component: 3000 - total flux cleaned = 0.00262069 Jy ! Component: 3050 - total flux cleaned = 0.00267266 Jy ! Component: 3100 - total flux cleaned = 0.00269008 Jy ! Component: 3150 - total flux cleaned = 0.00272425 Jy ! Component: 3200 - total flux cleaned = 0.00277524 Jy ! Component: 3250 - total flux cleaned = 0.00277509 Jy ! Component: 3300 - total flux cleaned = 0.00279194 Jy ! Component: 3350 - total flux cleaned = 0.00289172 Jy ! Component: 3400 - total flux cleaned = 0.00292483 Jy ! Component: 3450 - total flux cleaned = 0.0029576 Jy ! Component: 3500 - total flux cleaned = 0.00300663 Jy ! Component: 3550 - total flux cleaned = 0.00305548 Jy ! Component: 3600 - total flux cleaned = 0.00308781 Jy ! Component: 3650 - total flux cleaned = 0.00305545 Jy ! Component: 3700 - total flux cleaned = 0.00307151 Jy ! Component: 3750 - total flux cleaned = 0.00313512 Jy ! Component: 3800 - total flux cleaned = 0.00313511 Jy ! Component: 3850 - total flux cleaned = 0.00318234 Jy ! Component: 3900 - total flux cleaned = 0.00321369 Jy ! Component: 3950 - total flux cleaned = 0.00326026 Jy ! Component: 4000 - total flux cleaned = 0.00330667 Jy ! Component: 4050 - total flux cleaned = 0.00327594 Jy ! Total flux subtracted in 4096 components = 0.00329128 Jy ! Clean residual min=-0.000884 max=0.000937 Jy/beam ! Clean residual mean=-0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.243368 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 395 components and 0.243368 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0213+8717_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 4.98 at -36.08 degrees (North through East) ! Clean map min=-0.0019825 max=0.22952 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0213+8717_S_map.fits wmodel /image_prod/ug002_uva//J0213+8717_S_map.mod ! Writing 395 model components to file: /image_prod/ug002_uva//J0213+8717_S_map.mod wobs /image_prod/ug002_uva//J0213+8717_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0213+8717_S_uvs.fits wwins /image_prod/ug002_uva//J0213+8717_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0213+8717_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.229516 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000279136 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.364857 0.364857 0.729714 1.45943 2.91885 5.83771 11.6754 23.3508 46.7017 93.4034 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.229 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 822.24 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0213+8717_S_dfm.log closed on Wed Mar 4 19:27:51 2020