! Started logfile: /image_prod/ug002_uva//J0211+1707_X_dfm.log on Wed Mar 4 19:26:33 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0211+1707_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0211+1707_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979259 visibilities/baseline/integration-bin. ! Found source: J0211+1707 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0211+1707_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009053Jy sigma=9.120439 ! Fit after self-cal, rms=0.890952Jy sigma=8.040800 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6645 mas, bmaj=1.649 mas, bpa=-4.261 degrees ! Estimated noise=0.818374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0810969 Jy ! Component: 100 - total flux cleaned = 0.103626 Jy ! Total flux subtracted in 100 components = 0.103626 Jy ! Clean residual min=-0.005907 max=0.015807 Jy/beam ! Clean residual mean=-0.000013 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.103626 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.103626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065657Jy sigma=0.561019 ! Fit after self-cal, rms=0.065466Jy sigma=0.559731 ! Inverting map ! Added new window around map position (0.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158176 Jy ! Component: 100 - total flux cleaned = 0.0238794 Jy ! Total flux subtracted in 100 components = 0.0238794 Jy ! Clean residual min=-0.004052 max=0.005157 Jy/beam ! Clean residual mean=-0.000008 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.127505 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.127505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060824Jy sigma=0.517306 ! Fit after self-cal, rms=0.060468Jy sigma=0.514249 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609836 Jy ! Component: 100 - total flux cleaned = 0.00926308 Jy ! Total flux subtracted in 100 components = 0.00926308 Jy ! Clean residual min=-0.003248 max=0.005085 Jy/beam ! Clean residual mean=-0.000006 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.136768 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.136768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059616Jy sigma=0.507296 ! Fit after self-cal, rms=0.059551Jy sigma=0.506712 ! Inverting map ! Added new window around map position (9.2, -10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528527 Jy ! Component: 100 - total flux cleaned = 0.00847383 Jy ! Total flux subtracted in 100 components = 0.00847383 Jy ! Clean residual min=-0.002920 max=0.004015 Jy/beam ! Clean residual mean=-0.000006 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.145242 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.145242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058782Jy sigma=0.498939 ! Fit after self-cal, rms=0.058742Jy sigma=0.498589 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397572 Jy ! Component: 100 - total flux cleaned = 0.00669351 Jy ! Total flux subtracted in 100 components = 0.00669351 Jy ! Clean residual min=-0.002707 max=0.003809 Jy/beam ! Clean residual mean=-0.000005 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.151935 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.151935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058354Jy sigma=0.494750 ! Fit after self-cal, rms=0.058326Jy sigma=0.494461 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8643 mas, bmaj=1.947 mas, bpa=-3.632 degrees ! Estimated noise=0.446057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.4, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558848 Jy ! Component: 100 - total flux cleaned = 0.00912244 Jy ! Component: 150 - total flux cleaned = 0.0118613 Jy ! Component: 200 - total flux cleaned = 0.014095 Jy ! Total flux subtracted in 200 components = 0.014095 Jy ! Clean residual min=-0.003186 max=0.003600 Jy/beam ! Clean residual mean=-0.000007 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.16603 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 85 components and 0.16603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057703Jy sigma=0.487874 ! Fit after self-cal, rms=0.057663Jy sigma=0.487516 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8643 x 1.947 at -3.632 degrees (North through East) ! Clean map min=-0.0030776 max=0.10577 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.03 KP 0.99 ! LA 1.03 MK 0.99 NL 1.14 OV 0.97 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 0.99 ! LA 1.01 MK 1.00 NL 1.14 OV 0.97 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00 KP 0.99 ! LA 1.04 MK 1.02 NL 1.12 OV 0.99 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 0.99 ! LA 1.03 MK 1.02 NL 1.18 OV 0.98 ! PT 0.91 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.95 KP 1.00 ! LA 1.01 MK 0.97 NL 1.14 OV 0.98 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 0.99 ! LA 1.03 MK 1.00 NL 1.10 OV 0.99 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.00 KP 1.00 ! LA 1.01 MK 1.00 NL 1.10 OV 0.99 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.97 KP 1.00 ! LA 1.02 MK 0.98 NL 1.11 OV 0.98 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00 KP 0.99 ! LA 1.02 MK 1.01 NL 1.08 OV 0.98 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.01 KP 0.98 ! LA 1.04 MK 1.00 NL 1.13 OV 1.00 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.96 KP 1.01 ! LA 1.04 MK 0.97 NL 1.09 OV 0.98 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.99 KP 0.99 ! LA 1.04 MK 0.96 NL 1.14 OV 0.98 ! PT 0.92 SC 0.95 ! ! ! Fit before self-cal, rms=0.057663Jy sigma=0.487516 ! Fit after self-cal, rms=0.055694Jy sigma=0.480891 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8636 mas, bmaj=1.949 mas, bpa=-3.385 degrees ! Estimated noise=0.44241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017848 Jy ! Component: 100 - total flux cleaned = 0.00271644 Jy ! Component: 150 - total flux cleaned = 0.00346918 Jy ! Component: 200 - total flux cleaned = 0.00376331 Jy ! Total flux subtracted in 200 components = 0.00376331 Jy ! Clean residual min=-0.001779 max=0.001997 Jy/beam ! Clean residual mean=-0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.169794 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 117 components and 0.169794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055509Jy sigma=0.479145 ! Fit after self-cal, rms=0.055497Jy sigma=0.478980 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055497Jy sigma=0.478980 ! Fit after self-cal, rms=0.055216Jy sigma=0.476062 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.864 mas, bmaj=1.949 mas, bpa=-3.336 degrees ! Estimated noise=0.441757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074732 Jy ! Component: 100 - total flux cleaned = 0.00128275 Jy ! Component: 150 - total flux cleaned = 0.00164608 Jy ! Component: 200 - total flux cleaned = 0.00185656 Jy ! Total flux subtracted in 200 components = 0.00185656 Jy ! Clean residual min=-0.001397 max=0.001878 Jy/beam ! Clean residual mean=-0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.17165 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 139 components and 0.17165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055146Jy sigma=0.475382 ! Fit after self-cal, rms=0.055145Jy sigma=0.475322 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.4, -18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191355 Jy ! Component: 100 - total flux cleaned = 0.00302429 Jy ! Component: 150 - total flux cleaned = 0.00339073 Jy ! Component: 200 - total flux cleaned = 0.0035825 Jy ! Total flux subtracted in 200 components = 0.0035825 Jy ! Clean residual min=-0.001298 max=0.001485 Jy/beam ! Clean residual mean=-0.000003 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.175233 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 178 components and 0.175233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055071Jy sigma=0.474510 ! Fit after self-cal, rms=0.055066Jy sigma=0.474476 ! Inverting map ! Added new window around map position (12.4, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013325 Jy ! Component: 100 - total flux cleaned = 0.00191746 Jy ! Component: 150 - total flux cleaned = 0.0021282 Jy ! Component: 200 - total flux cleaned = 0.0023498 Jy ! Total flux subtracted in 200 components = 0.0023498 Jy ! Clean residual min=-0.001297 max=0.001391 Jy/beam ! Clean residual mean=-0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.177582 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 206 components and 0.177582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055022Jy sigma=0.474051 ! Fit after self-cal, rms=0.055018Jy sigma=0.474027 ! Inverting map ! Added new window around map position (7.4, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120767 Jy ! Component: 100 - total flux cleaned = 0.00143727 Jy ! Component: 150 - total flux cleaned = 0.00170341 Jy ! Component: 200 - total flux cleaned = 0.00197152 Jy ! Total flux subtracted in 200 components = 0.00197152 Jy ! Clean residual min=-0.001205 max=0.001192 Jy/beam ! Clean residual mean=-0.000003 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.179554 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 226 components and 0.179554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054977Jy sigma=0.473602 ! Fit after self-cal, rms=0.054972Jy sigma=0.473566 ! Inverting map ! Added new window around map position (26, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103795 Jy ! Component: 100 - total flux cleaned = 0.00154274 Jy ! Component: 150 - total flux cleaned = 0.00185672 Jy ! Component: 200 - total flux cleaned = 0.00209621 Jy ! Total flux subtracted in 200 components = 0.00209621 Jy ! Clean residual min=-0.001118 max=0.001066 Jy/beam ! Clean residual mean=-0.000003 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.18165 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 250 components and 0.18165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054941Jy sigma=0.473268 ! Fit after self-cal, rms=0.054938Jy sigma=0.473253 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054938Jy sigma=0.473253 ! Fit after self-cal, rms=0.054850Jy sigma=0.473012 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=1.949 mas, bpa=-3.289 degrees ! Estimated noise=0.441498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256419 Jy ! Component: 100 - total flux cleaned = 0.000620513 Jy ! Component: 150 - total flux cleaned = 0.000975416 Jy ! Component: 200 - total flux cleaned = 0.00132236 Jy ! Total flux subtracted in 200 components = 0.00132236 Jy ! Clean residual min=-0.000986 max=0.000979 Jy/beam ! Clean residual mean=-0.000002 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.182973 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 265 components and 0.182973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054826Jy sigma=0.472788 ! Fit after self-cal, rms=0.054826Jy sigma=0.472775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253655 Jy ! Component: 100 - total flux cleaned = 0.000507917 Jy ! Component: 150 - total flux cleaned = 0.00066774 Jy ! Component: 200 - total flux cleaned = 0.00074382 Jy ! Total flux subtracted in 200 components = 0.00074382 Jy ! Clean residual min=-0.000964 max=0.000943 Jy/beam ! Clean residual mean=-0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.183716 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 285 components and 0.183716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054812Jy sigma=0.472651 ! Fit after self-cal, rms=0.054811Jy sigma=0.472645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054811Jy sigma=0.472645 ! Fit after self-cal, rms=0.054787Jy sigma=0.472621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=2.903 mas, bpa=-2.205 degrees ! Estimated noise=0.562021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000680865 Jy ! Component: 100 - total flux cleaned = 0.00109345 Jy ! Component: 150 - total flux cleaned = 0.00132425 Jy ! Component: 200 - total flux cleaned = 0.00153963 Jy ! Total flux subtracted in 200 components = 0.00153963 Jy ! Clean residual min=-0.001198 max=0.001033 Jy/beam ! Clean residual mean=-0.000005 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.185256 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 311 components and 0.185256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054777Jy sigma=0.472539 ! Fit after self-cal, rms=0.054774Jy sigma=0.472521 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212201 Jy ! Component: 100 - total flux cleaned = 0.000390007 Jy ! Component: 150 - total flux cleaned = 0.000528684 Jy ! Component: 200 - total flux cleaned = 0.000574613 Jy ! Total flux subtracted in 200 components = 0.000574613 Jy ! Clean residual min=-0.001154 max=0.001049 Jy/beam ! Clean residual mean=-0.000005 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.185831 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 328 components and 0.185831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054770Jy sigma=0.472487 ! Fit after self-cal, rms=0.054769Jy sigma=0.472480 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8626 mas, bmaj=1.948 mas, bpa=-3.254 degrees ! Estimated noise=0.441584 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8626 x 1.948 at -3.254 degrees (North through East) ! Clean map min=-0.00086069 max=0.1048 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6632 mas, bmaj=1.649 mas, bpa=-3.915 degrees ! Estimated noise=0.80964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0801372 Jy ! Component: 100 - total flux cleaned = 0.107842 Jy ! Component: 150 - total flux cleaned = 0.121502 Jy ! Component: 200 - total flux cleaned = 0.129218 Jy ! Total flux subtracted in 200 components = 0.129218 Jy ! Clean residual min=-0.002538 max=0.004158 Jy/beam ! Clean residual mean=-0.000006 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.129218 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.129218 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8626 mas, bmaj=1.948 mas, bpa=-3.254 degrees ! Estimated noise=0.441584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088048 Jy ! Component: 100 - total flux cleaned = 0.0150852 Jy ! Component: 150 - total flux cleaned = 0.0199037 Jy ! Component: 200 - total flux cleaned = 0.0237712 Jy ! Total flux subtracted in 200 components = 0.0237712 Jy ! Clean residual min=-0.001792 max=0.002352 Jy/beam ! Clean residual mean=-0.000007 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.15299 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 62 components and 0.15299 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322978 Jy ! Component: 100 - total flux cleaned = 0.00599639 Jy ! Component: 150 - total flux cleaned = 0.00841086 Jy ! Component: 200 - total flux cleaned = 0.0105372 Jy ! Total flux subtracted in 200 components = 0.0105372 Jy ! Clean residual min=-0.001460 max=0.001677 Jy/beam ! Clean residual mean=-0.000005 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.163527 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 105 components and 0.163527 Jy ! Inverting map ! Added new window around map position (5.6, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199308 Jy ! Component: 100 - total flux cleaned = 0.00373522 Jy ! Component: 150 - total flux cleaned = 0.00531346 Jy ! Component: 200 - total flux cleaned = 0.00675329 Jy ! Total flux subtracted in 200 components = 0.00675329 Jy ! Clean residual min=-0.001291 max=0.001255 Jy/beam ! Clean residual mean=-0.000004 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.17028 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 155 components and 0.17028 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=2.903 mas, bpa=-2.205 degrees ! Estimated noise=0.562021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261209 Jy ! Component: 100 - total flux cleaned = 0.00465956 Jy ! Component: 150 - total flux cleaned = 0.00632715 Jy ! Component: 200 - total flux cleaned = 0.00772785 Jy ! Total flux subtracted in 200 components = 0.00772785 Jy ! Clean residual min=-0.001376 max=0.001329 Jy/beam ! Clean residual mean=-0.000007 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.178008 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119249 Jy ! Component: 100 - total flux cleaned = 0.00221708 Jy ! Component: 150 - total flux cleaned = 0.00310088 Jy ! Component: 200 - total flux cleaned = 0.00377863 Jy ! Total flux subtracted in 200 components = 0.00377863 Jy ! Clean residual min=-0.001239 max=0.001124 Jy/beam ! Clean residual mean=-0.000006 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.181787 Jy ! Adding 157 model components to the UV plane model. ! The established model now contains 288 components and 0.181786 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8626 mas, bmaj=1.948 mas, bpa=-3.254 degrees ! Estimated noise=0.441584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457827 Jy ! Component: 100 - total flux cleaned = 0.00076552 Jy ! Component: 150 - total flux cleaned = 0.000994398 Jy ! Component: 200 - total flux cleaned = 0.00118497 Jy ! Total flux subtracted in 200 components = 0.00118497 Jy ! Clean residual min=-0.000954 max=0.000915 Jy/beam ! Clean residual mean=-0.000003 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.182971 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 313 components and 0.182971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054772Jy sigma=0.472519 ! Fit after self-cal, rms=0.054754Jy sigma=0.472399 wmodel J0211+1707_X_map.mod ! Writing 313 model components to file: J0211+1707_X_map.mod wobs J0211+1707_X_uvs.fits ! Writing UV FITS file: J0211+1707_X_uvs.fits wwins J0211+1707_X_map.win ! wwins: Wrote 11 windows to J0211+1707_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.76237e-05 Jy ! Component: 100 - total flux cleaned = -0.000193643 Jy ! Component: 150 - total flux cleaned = -0.000283976 Jy ! Component: 200 - total flux cleaned = -0.000342072 Jy ! Component: 250 - total flux cleaned = -0.000342369 Jy ! Component: 300 - total flux cleaned = -0.000438792 Jy ! Component: 350 - total flux cleaned = -0.000465785 Jy ! Component: 400 - total flux cleaned = -0.000518532 Jy ! Component: 450 - total flux cleaned = -0.00053137 Jy ! Component: 500 - total flux cleaned = -0.000544209 Jy ! Component: 550 - total flux cleaned = -0.000581835 Jy ! Component: 600 - total flux cleaned = -0.000606604 Jy ! Component: 650 - total flux cleaned = -0.00063119 Jy ! Component: 700 - total flux cleaned = -0.000691762 Jy ! Component: 750 - total flux cleaned = -0.000715797 Jy ! Component: 800 - total flux cleaned = -0.00076305 Jy ! Component: 850 - total flux cleaned = -0.000797918 Jy ! Component: 900 - total flux cleaned = -0.000798077 Jy ! Component: 950 - total flux cleaned = -0.000820875 Jy ! Component: 1000 - total flux cleaned = -0.000809786 Jy ! Component: 1050 - total flux cleaned = -0.000820852 Jy ! Component: 1100 - total flux cleaned = -0.000776696 Jy ! Component: 1150 - total flux cleaned = -0.000765765 Jy ! Component: 1200 - total flux cleaned = -0.000765669 Jy ! Component: 1250 - total flux cleaned = -0.0007334 Jy ! Component: 1300 - total flux cleaned = -0.000690891 Jy ! Component: 1350 - total flux cleaned = -0.000680329 Jy ! Component: 1400 - total flux cleaned = -0.000638677 Jy ! Component: 1450 - total flux cleaned = -0.000618053 Jy ! Component: 1500 - total flux cleaned = -0.000628072 Jy ! Component: 1550 - total flux cleaned = -0.000607634 Jy ! Component: 1600 - total flux cleaned = -0.000546931 Jy ! Component: 1650 - total flux cleaned = -0.000536982 Jy ! Component: 1700 - total flux cleaned = -0.000497101 Jy ! Component: 1750 - total flux cleaned = -0.00049708 Jy ! Component: 1800 - total flux cleaned = -0.000428589 Jy ! Component: 1850 - total flux cleaned = -0.00043827 Jy ! Component: 1900 - total flux cleaned = -0.000438192 Jy ! Component: 1950 - total flux cleaned = -0.000418891 Jy ! Component: 2000 - total flux cleaned = -0.00039033 Jy ! Component: 2050 - total flux cleaned = -0.000361933 Jy ! Component: 2100 - total flux cleaned = -0.000380767 Jy ! Component: 2150 - total flux cleaned = -0.000362178 Jy ! Component: 2200 - total flux cleaned = -0.000371513 Jy ! Component: 2250 - total flux cleaned = -0.000389826 Jy ! Component: 2300 - total flux cleaned = -0.000371515 Jy ! Component: 2350 - total flux cleaned = -0.000389735 Jy ! Component: 2400 - total flux cleaned = -0.000380687 Jy ! Component: 2450 - total flux cleaned = -0.00043458 Jy ! Component: 2500 - total flux cleaned = -0.000425594 Jy ! Component: 2550 - total flux cleaned = -0.000416715 Jy ! Component: 2600 - total flux cleaned = -0.000416684 Jy ! Component: 2650 - total flux cleaned = -0.00042547 Jy ! Component: 2700 - total flux cleaned = -0.000416734 Jy ! Component: 2750 - total flux cleaned = -0.000442728 Jy ! Component: 2800 - total flux cleaned = -0.000468631 Jy ! Component: 2850 - total flux cleaned = -0.000468621 Jy ! Component: 2900 - total flux cleaned = -0.000528293 Jy ! Component: 2950 - total flux cleaned = -0.000519728 Jy ! Component: 3000 - total flux cleaned = -0.000553355 Jy ! Component: 3050 - total flux cleaned = -0.000595228 Jy ! Component: 3100 - total flux cleaned = -0.00062013 Jy ! Component: 3150 - total flux cleaned = -0.000628375 Jy ! Component: 3200 - total flux cleaned = -0.000644846 Jy ! Component: 3250 - total flux cleaned = -0.000710251 Jy ! Component: 3300 - total flux cleaned = -0.000694085 Jy ! Component: 3350 - total flux cleaned = -0.000726455 Jy ! Component: 3400 - total flux cleaned = -0.000766684 Jy ! Component: 3450 - total flux cleaned = -0.000822726 Jy ! Component: 3500 - total flux cleaned = -0.000862479 Jy ! Component: 3550 - total flux cleaned = -0.00085455 Jy ! Component: 3600 - total flux cleaned = -0.000886133 Jy ! Component: 3650 - total flux cleaned = -0.000917486 Jy ! Component: 3700 - total flux cleaned = -0.000972136 Jy ! Component: 3750 - total flux cleaned = -0.00095666 Jy ! Component: 3800 - total flux cleaned = -0.00097205 Jy ! Component: 3850 - total flux cleaned = -0.00100286 Jy ! Component: 3900 - total flux cleaned = -0.00104105 Jy ! Component: 3950 - total flux cleaned = -0.00104868 Jy ! Component: 4000 - total flux cleaned = -0.00107897 Jy ! Component: 4050 - total flux cleaned = -0.00110914 Jy ! Total flux subtracted in 4096 components = -0.00112414 Jy ! Clean residual min=-0.000471 max=0.000438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.181847 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 620 components and 0.181847 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0211+1707_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8626 x 1.948 at -3.254 degrees (North through East) ! Clean map min=-0.00062837 max=0.10462 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0211+1707_X_map.fits wmodel /image_prod/ug002_uva//J0211+1707_X_map.mod ! Writing 620 model components to file: /image_prod/ug002_uva//J0211+1707_X_map.mod wobs /image_prod/ug002_uva//J0211+1707_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0211+1707_X_uvs.fits wwins /image_prod/ug002_uva//J0211+1707_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0211+1707_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.104616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130871 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.37529 0.37529 0.75058 1.50116 3.00232 6.00464 12.0093 24.0186 48.0371 96.0743 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.104 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 799.381 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0211+1707_X_dfm.log closed on Wed Mar 4 19:26:40 2020