! Started logfile: /image_prod/ug002_uva//J0208-1739_S_dfm.log on Wed Mar 4 19:25:29 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0208-1739_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0208-1739_S_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.986667 visibilities/baseline/integration-bin. ! Found source: J0208-1739 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5328 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0208-1739_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000637Jy sigma=7.425811 ! Fit after self-cal, rms=0.865622Jy sigma=6.388805 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=6.822 mas, bpa=-1.848 degrees ! Estimated noise=1.95924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109905 Jy ! Component: 100 - total flux cleaned = 0.133879 Jy ! Total flux subtracted in 100 components = 0.133879 Jy ! Clean residual min=-0.007982 max=0.013270 Jy/beam ! Clean residual mean=-0.000003 rms=0.002284 Jy/beam ! Combined flux in latest and established models = 0.133879 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.133879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079296Jy sigma=0.510606 ! Fit after self-cal, rms=0.079284Jy sigma=0.510555 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=7.993 mas, bpa=-2.151 degrees ! Estimated noise=1.3543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817853 Jy ! Component: 100 - total flux cleaned = 0.00867101 Jy ! Component: 150 - total flux cleaned = 0.00887935 Jy ! Component: 200 - total flux cleaned = 0.00887676 Jy ! Total flux subtracted in 200 components = 0.00887676 Jy ! Clean residual min=-0.006194 max=0.009998 Jy/beam ! Clean residual mean=0.000011 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.142756 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.142756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077349Jy sigma=0.496170 ! Fit after self-cal, rms=0.077219Jy sigma=0.494904 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 7.993 at -2.151 degrees (North through East) ! Clean map min=-0.0060578 max=0.13813 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.99 HN 0.97 KP 0.96 ! LA 1.01 MK 0.98 OV 0.82 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 0.99 HN 0.97 KP 0.99 ! LA 1.04 MK 0.97 OV 0.87 PT 1.00 ! SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.60 FD 0.98 HN 0.98 KP 1.00 ! LA 1.02 MK 0.88 OV 0.89 PT 0.99 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.077219Jy sigma=0.494904 ! Fit after self-cal, rms=0.078235Jy sigma=0.472545 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=8.022 mas, bpa=-2.477 degrees ! Estimated noise=1.34161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165654 Jy ! Component: 100 - total flux cleaned = -0.0016638 Jy ! Component: 150 - total flux cleaned = -0.00166351 Jy ! Component: 200 - total flux cleaned = -0.00166269 Jy ! Total flux subtracted in 200 components = -0.00166269 Jy ! Clean residual min=-0.003128 max=0.002864 Jy/beam ! Clean residual mean=0.000005 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.141094 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.141094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078008Jy sigma=0.471108 ! Fit after self-cal, rms=0.078130Jy sigma=0.470844 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078130Jy sigma=0.470844 ! Fit after self-cal, rms=0.080209Jy sigma=0.468310 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.004 mas, bpa=-2.673 degrees ! Estimated noise=1.34234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000808128 Jy ! Component: 100 - total flux cleaned = -0.000528561 Jy ! Component: 150 - total flux cleaned = -0.000289052 Jy ! Component: 200 - total flux cleaned = -0.000179844 Jy ! Total flux subtracted in 200 components = -0.000179844 Jy ! Clean residual min=-0.002877 max=0.002597 Jy/beam ! Clean residual mean=0.000000 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.140914 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.140914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080071Jy sigma=0.467508 ! Fit after self-cal, rms=0.080081Jy sigma=0.467416 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033012 Jy ! Component: 100 - total flux cleaned = -0.000233699 Jy ! Component: 150 - total flux cleaned = -0.000189433 Jy ! Component: 200 - total flux cleaned = -0.000189132 Jy ! Total flux subtracted in 200 components = -0.000189132 Jy ! Clean residual min=-0.002842 max=0.002581 Jy/beam ! Clean residual mean=-0.000000 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.140725 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.140725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080016Jy sigma=0.467031 ! Fit after self-cal, rms=0.080008Jy sigma=0.467007 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080008Jy sigma=0.467007 ! Fit after self-cal, rms=0.080640Jy sigma=0.466888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=7.991 mas, bpa=-2.647 degrees ! Estimated noise=1.34277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269866 Jy ! Component: 100 - total flux cleaned = -0.000133705 Jy ! Component: 150 - total flux cleaned = -5.13572e-05 Jy ! Component: 200 - total flux cleaned = -1.30352e-05 Jy ! Total flux subtracted in 200 components = -1.30352e-05 Jy ! Clean residual min=-0.002828 max=0.002427 Jy/beam ! Clean residual mean=-0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.140711 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.140712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080580Jy sigma=0.466537 ! Fit after self-cal, rms=0.080581Jy sigma=0.466515 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146625 Jy ! Component: 100 - total flux cleaned = -7.5254e-05 Jy ! Component: 150 - total flux cleaned = -4.22635e-05 Jy ! Component: 200 - total flux cleaned = -4.22523e-05 Jy ! Total flux subtracted in 200 components = -4.22523e-05 Jy ! Clean residual min=-0.002821 max=0.002413 Jy/beam ! Clean residual mean=-0.000001 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.140669 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.140669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080548Jy sigma=0.466318 ! Fit after self-cal, rms=0.080545Jy sigma=0.466309 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080545Jy sigma=0.466309 ! Fit after self-cal, rms=0.080865Jy sigma=0.466258 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.229 mas, bmaj=16.46 mas, bpa=3.243 degrees ! Estimated noise=1.6898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731262 Jy ! Component: 100 - total flux cleaned = 0.000844587 Jy ! Component: 150 - total flux cleaned = 0.000936943 Jy ! Component: 200 - total flux cleaned = 0.000986379 Jy ! Total flux subtracted in 200 components = 0.000986379 Jy ! Clean residual min=-0.001952 max=0.001849 Jy/beam ! Clean residual mean=-0.000001 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.141656 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.141656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080844Jy sigma=0.466215 ! Fit after self-cal, rms=0.080842Jy sigma=0.466184 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226355 Jy ! Component: 100 - total flux cleaned = 0.000292446 Jy ! Component: 150 - total flux cleaned = 0.000292512 Jy ! Component: 200 - total flux cleaned = 0.000292645 Jy ! Total flux subtracted in 200 components = 0.000292645 Jy ! Clean residual min=-0.001993 max=0.001748 Jy/beam ! Clean residual mean=-0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.141948 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.141948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080834Jy sigma=0.466189 ! Fit after self-cal, rms=0.080832Jy sigma=0.466178 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=7.983 mas, bpa=-2.601 degrees ! Estimated noise=1.34236 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.111 x 7.983 at -2.601 degrees (North through East) ! Clean map min=-0.0025728 max=0.1372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.838 mas, bpa=-2.591 degrees ! Estimated noise=1.92336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107814 Jy ! Component: 100 - total flux cleaned = 0.131396 Jy ! Component: 150 - total flux cleaned = 0.137624 Jy ! Component: 200 - total flux cleaned = 0.139215 Jy ! Total flux subtracted in 200 components = 0.139215 Jy ! Clean residual min=-0.004453 max=0.004503 Jy/beam ! Clean residual mean=-0.000001 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.139215 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.139215 Jy ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=7.983 mas, bpa=-2.601 degrees ! Estimated noise=1.34236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249631 Jy ! Component: 100 - total flux cleaned = 0.0030138 Jy ! Component: 150 - total flux cleaned = 0.00316243 Jy ! Component: 200 - total flux cleaned = 0.00330059 Jy ! Total flux subtracted in 200 components = 0.00330059 Jy ! Clean residual min=-0.002825 max=0.002452 Jy/beam ! Clean residual mean=0.000000 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.142515 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.142515 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.229 mas, bmaj=16.46 mas, bpa=3.243 degrees ! Estimated noise=1.6898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148628 Jy ! Component: 100 - total flux cleaned = -0.000111279 Jy ! Component: 150 - total flux cleaned = -7.7954e-05 Jy ! Component: 200 - total flux cleaned = -4.80811e-05 Jy ! Total flux subtracted in 200 components = -4.80811e-05 Jy ! Clean residual min=-0.001970 max=0.001742 Jy/beam ! Clean residual mean=0.000000 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.142467 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.02766e-07 Jy ! Component: 100 - total flux cleaned = 2.71132e-05 Jy ! Component: 150 - total flux cleaned = 2.78466e-05 Jy ! Component: 200 - total flux cleaned = 2.80492e-05 Jy ! Total flux subtracted in 200 components = 2.80492e-05 Jy ! Clean residual min=-0.001927 max=0.001706 Jy/beam ! Clean residual mean=-0.000000 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.142495 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.142495 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=7.983 mas, bpa=-2.601 degrees ! Estimated noise=1.34236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289661 Jy ! Component: 100 - total flux cleaned = 0.000288656 Jy ! Component: 150 - total flux cleaned = 0.000289388 Jy ! Component: 200 - total flux cleaned = 0.000340493 Jy ! Total flux subtracted in 200 components = 0.000340493 Jy ! Clean residual min=-0.002615 max=0.002288 Jy/beam ! Clean residual mean=0.000000 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.142836 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.142836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080862Jy sigma=0.466214 ! Fit after self-cal, rms=0.080860Jy sigma=0.466143 wmodel J0208-1739_S_map.mod ! Writing 75 model components to file: J0208-1739_S_map.mod wobs J0208-1739_S_uvs.fits ! Writing UV FITS file: J0208-1739_S_uvs.fits wwins J0208-1739_S_map.win ! wwins: Wrote 3 windows to J0208-1739_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475911 Jy ! Component: 100 - total flux cleaned = -0.000677684 Jy ! Component: 150 - total flux cleaned = -0.000868396 Jy ! Component: 200 - total flux cleaned = -0.0011228 Jy ! Component: 250 - total flux cleaned = -0.00143558 Jy ! Component: 300 - total flux cleaned = -0.00173654 Jy ! Component: 350 - total flux cleaned = -0.00193103 Jy ! Component: 400 - total flux cleaned = -0.00205688 Jy ! Component: 450 - total flux cleaned = -0.00217907 Jy ! Component: 500 - total flux cleaned = -0.00226787 Jy ! Component: 550 - total flux cleaned = -0.00229556 Jy ! Component: 600 - total flux cleaned = -0.00223911 Jy ! Component: 650 - total flux cleaned = -0.00221147 Jy ! Component: 700 - total flux cleaned = -0.00215809 Jy ! Component: 750 - total flux cleaned = -0.00218425 Jy ! Component: 800 - total flux cleaned = -0.00215825 Jy ! Component: 850 - total flux cleaned = -0.00215819 Jy ! Component: 900 - total flux cleaned = -0.0021329 Jy ! Component: 950 - total flux cleaned = -0.00213268 Jy ! Component: 1000 - total flux cleaned = -0.00206072 Jy ! Component: 1050 - total flux cleaned = -0.00201372 Jy ! Component: 1100 - total flux cleaned = -0.00194403 Jy ! Component: 1150 - total flux cleaned = -0.0018063 Jy ! Component: 1200 - total flux cleaned = -0.00164813 Jy ! Component: 1250 - total flux cleaned = -0.00153667 Jy ! Component: 1300 - total flux cleaned = -0.00142662 Jy ! Component: 1350 - total flux cleaned = -0.00127481 Jy ! Component: 1400 - total flux cleaned = -0.00110352 Jy ! Component: 1450 - total flux cleaned = -0.000955473 Jy ! Component: 1500 - total flux cleaned = -0.000851364 Jy ! Component: 1550 - total flux cleaned = -0.000727652 Jy ! Component: 1600 - total flux cleaned = -0.000686699 Jy ! Component: 1650 - total flux cleaned = -0.000626089 Jy ! Component: 1700 - total flux cleaned = -0.000486662 Jy ! Component: 1750 - total flux cleaned = -0.000388786 Jy ! Component: 1800 - total flux cleaned = -0.000349991 Jy ! Component: 1850 - total flux cleaned = -0.000196493 Jy ! Component: 1900 - total flux cleaned = -0.000177695 Jy ! Component: 1950 - total flux cleaned = -0.000120864 Jy ! Component: 2000 - total flux cleaned = -4.64258e-05 Jy ! Component: 2050 - total flux cleaned = 8.21569e-05 Jy ! Component: 2100 - total flux cleaned = 6.41852e-05 Jy ! Component: 2150 - total flux cleaned = 0.00020815 Jy ! Component: 2200 - total flux cleaned = 0.000261369 Jy ! Component: 2250 - total flux cleaned = 0.000332031 Jy ! Component: 2300 - total flux cleaned = 0.000384447 Jy ! Component: 2350 - total flux cleaned = 0.000488307 Jy ! Component: 2400 - total flux cleaned = 0.000591055 Jy ! Component: 2450 - total flux cleaned = 0.000624769 Jy ! Component: 2500 - total flux cleaned = 0.000675087 Jy ! Component: 2550 - total flux cleaned = 0.00072494 Jy ! Component: 2600 - total flux cleaned = 0.000774149 Jy ! Component: 2650 - total flux cleaned = 0.000790563 Jy ! Component: 2700 - total flux cleaned = 0.000903664 Jy ! Component: 2750 - total flux cleaned = 0.000903506 Jy ! Component: 2800 - total flux cleaned = 0.000935021 Jy ! Component: 2850 - total flux cleaned = 0.000935066 Jy ! Component: 2900 - total flux cleaned = 0.0010284 Jy ! Component: 2950 - total flux cleaned = 0.0010591 Jy ! Component: 3000 - total flux cleaned = 0.00107429 Jy ! Component: 3050 - total flux cleaned = 0.00110436 Jy ! Component: 3100 - total flux cleaned = 0.00110457 Jy ! Component: 3150 - total flux cleaned = 0.00111939 Jy ! Component: 3200 - total flux cleaned = 0.00113411 Jy ! Component: 3250 - total flux cleaned = 0.00114857 Jy ! Component: 3300 - total flux cleaned = 0.00114849 Jy ! Component: 3350 - total flux cleaned = 0.0012061 Jy ! Component: 3400 - total flux cleaned = 0.0012204 Jy ! Component: 3450 - total flux cleaned = 0.00122032 Jy ! Component: 3500 - total flux cleaned = 0.00122021 Jy ! Component: 3550 - total flux cleaned = 0.00120619 Jy ! Component: 3600 - total flux cleaned = 0.00120613 Jy ! Component: 3650 - total flux cleaned = 0.00124707 Jy ! Component: 3700 - total flux cleaned = 0.00126062 Jy ! Component: 3750 - total flux cleaned = 0.00119329 Jy ! Component: 3800 - total flux cleaned = 0.0012336 Jy ! Component: 3850 - total flux cleaned = 0.00123367 Jy ! Component: 3900 - total flux cleaned = 0.00126009 Jy ! Component: 3950 - total flux cleaned = 0.0012601 Jy ! Component: 4000 - total flux cleaned = 0.00127313 Jy ! Component: 4050 - total flux cleaned = 0.00126022 Jy ! Total flux subtracted in 4096 components = 0.00128604 Jy ! Clean residual min=-0.000708 max=0.000676 Jy/beam ! Clean residual mean=-0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.144122 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 343 components and 0.144122 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0208-1739_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.111 x 7.983 at -2.601 degrees (North through East) ! Clean map min=-0.0016606 max=0.13633 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0208-1739_S_map.fits wmodel /image_prod/ug002_uva//J0208-1739_S_map.mod ! Writing 343 model components to file: /image_prod/ug002_uva//J0208-1739_S_map.mod wobs /image_prod/ug002_uva//J0208-1739_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0208-1739_S_uvs.fits wwins /image_prod/ug002_uva//J0208-1739_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0208-1739_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.136333 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222719 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.490091 0.490091 0.980182 1.96036 3.92073 7.84146 15.6829 31.3658 62.7316 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.136 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 612.131 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0208-1739_S_dfm.log closed on Wed Mar 4 19:25:33 2020