! Started logfile: /image_prod/ug002_uva//J0207+6246_X_dfm.log on Wed Mar 4 19:24:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0207+6246_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0207+6246_X_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967778 visibilities/baseline/integration-bin. ! Found source: J0207+6246 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 41808 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0207+6246_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.146122Jy sigma=8.847214 ! Fit after self-cal, rms=0.530363Jy sigma=4.328187 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7183 mas, bmaj=0.961 mas, bpa=-0.5706 degrees ! Estimated noise=0.931736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.327564 Jy ! Component: 100 - total flux cleaned = 0.460959 Jy ! Total flux subtracted in 100 components = 0.460959 Jy ! Clean residual min=-0.017869 max=0.062852 Jy/beam ! Clean residual mean=-0.000011 rms=0.004490 Jy/beam ! Combined flux in latest and established models = 0.460959 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.460959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189947Jy sigma=1.354383 ! Fit after self-cal, rms=0.189670Jy sigma=1.352265 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746903 Jy ! Component: 100 - total flux cleaned = 0.121083 Jy ! Total flux subtracted in 100 components = 0.121083 Jy ! Clean residual min=-0.011673 max=0.026787 Jy/beam ! Clean residual mean=-0.000008 rms=0.002858 Jy/beam ! Combined flux in latest and established models = 0.582042 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.582042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125894Jy sigma=0.894034 ! Fit after self-cal, rms=0.125774Jy sigma=0.892757 ! Inverting map ! Added new window around map position (19.4, 10.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325404 Jy ! Component: 100 - total flux cleaned = 0.0563998 Jy ! Total flux subtracted in 100 components = 0.0563998 Jy ! Clean residual min=-0.010604 max=0.019679 Jy/beam ! Clean residual mean=-0.000006 rms=0.002377 Jy/beam ! Combined flux in latest and established models = 0.638442 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.638441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106499Jy sigma=0.761714 ! Fit after self-cal, rms=0.106314Jy sigma=0.760518 ! Inverting map ! Added new window around map position (1.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226812 Jy ! Component: 100 - total flux cleaned = 0.0401611 Jy ! Total flux subtracted in 100 components = 0.0401611 Jy ! Clean residual min=-0.010072 max=0.015296 Jy/beam ! Clean residual mean=-0.000005 rms=0.002089 Jy/beam ! Combined flux in latest and established models = 0.678603 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 0.678603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094549Jy sigma=0.680481 ! Fit after self-cal, rms=0.094191Jy sigma=0.677450 ! Inverting map ! Added new window around map position (2.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172881 Jy ! Component: 100 - total flux cleaned = 0.0311666 Jy ! Total flux subtracted in 100 components = 0.0311666 Jy ! Clean residual min=-0.009141 max=0.012647 Jy/beam ! Clean residual mean=-0.000004 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 0.709769 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.709769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086578Jy sigma=0.626192 ! Fit after self-cal, rms=0.086408Jy sigma=0.624811 ! Inverting map ! Added new window around map position (1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138039 Jy ! Component: 100 - total flux cleaned = 0.0247853 Jy ! Total flux subtracted in 100 components = 0.0247853 Jy ! Clean residual min=-0.008646 max=0.010042 Jy/beam ! Clean residual mean=-0.000004 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.734555 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 70 components and 0.734555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081123Jy sigma=0.590318 ! Fit after self-cal, rms=0.080979Jy sigma=0.589146 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9271 mas, bmaj=1.231 mas, bpa=-0.3304 degrees ! Estimated noise=0.451299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187918 Jy ! Component: 100 - total flux cleaned = 0.0324309 Jy ! Component: 150 - total flux cleaned = 0.0432634 Jy ! Component: 200 - total flux cleaned = 0.0520291 Jy ! Total flux subtracted in 200 components = 0.0520291 Jy ! Clean residual min=-0.008667 max=0.013326 Jy/beam ! Clean residual mean=-0.000009 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.786584 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 98 components and 0.786584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073526Jy sigma=0.544178 ! Fit after self-cal, rms=0.073176Jy sigma=0.541452 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9271 x 1.231 at -0.3304 degrees (North through East) ! Clean map min=-0.0081248 max=0.46391 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.02 ! LA 1.03 MK 1.05 NL 1.10 OV 0.90 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.01 KP 1.02 ! LA 1.01 MK 1.05 NL 1.11 OV 0.92 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 1.03 ! LA 1.02 MK 1.05 NL 1.11 OV 0.92 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.02 KP 1.01 ! LA 1.03 MK 1.05 NL 1.11 OV 0.92 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.99 KP 1.03 ! LA 1.02 MK 1.05 NL 1.11 OV 0.91 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 1.02 ! LA 1.03 MK 1.06 NL 1.11 OV 0.86 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.01 KP 1.01 ! LA 1.02 MK 1.06 NL 1.10 OV 0.92 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.04 ! LA 1.03 MK 1.08 NL 1.11 OV 0.90 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.00 KP 1.02 ! LA 1.03 MK 1.07 NL 1.13 OV 0.93 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.00 KP 1.01 ! LA 1.04 MK 1.08 NL 1.11 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 1.04 ! LA 1.02 MK 1.05 NL 1.10 OV 0.89 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 1.04 ! LA 1.04 MK 1.05 NL 1.11 OV 0.94 ! PT 0.90 SC 1.01 ! ! ! Fit before self-cal, rms=0.073176Jy sigma=0.541452 ! Fit after self-cal, rms=0.056084Jy sigma=0.425551 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9367 mas, bmaj=1.241 mas, bpa=0.3909 degrees ! Estimated noise=0.451859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476721 Jy ! Component: 100 - total flux cleaned = 0.00603266 Jy ! Component: 150 - total flux cleaned = 0.00696902 Jy ! Component: 200 - total flux cleaned = 0.00773283 Jy ! Total flux subtracted in 200 components = 0.00773283 Jy ! Clean residual min=-0.003806 max=0.005388 Jy/beam ! Clean residual mean=0.000001 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.794317 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 0.794317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054911Jy sigma=0.417123 ! Fit after self-cal, rms=0.054798Jy sigma=0.416190 ! Inverting map ! Added new window around map position (18, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437343 Jy ! Component: 100 - total flux cleaned = 0.00576583 Jy ! Component: 150 - total flux cleaned = 0.00694069 Jy ! Component: 200 - total flux cleaned = 0.00789389 Jy ! Total flux subtracted in 200 components = 0.00789389 Jy ! Clean residual min=-0.003703 max=0.004658 Jy/beam ! Clean residual mean=0.000002 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.802211 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 0.802211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054202Jy sigma=0.412100 ! Fit after self-cal, rms=0.054168Jy sigma=0.411878 ! Inverting map ! Added new window around map position (1.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440431 Jy ! Component: 100 - total flux cleaned = 0.00566528 Jy ! Component: 150 - total flux cleaned = 0.00642157 Jy ! Component: 200 - total flux cleaned = 0.00708776 Jy ! Total flux subtracted in 200 components = 0.00708776 Jy ! Clean residual min=-0.003395 max=0.003626 Jy/beam ! Clean residual mean=0.000002 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.809298 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 142 components and 0.809298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053648Jy sigma=0.408067 ! Fit after self-cal, rms=0.053623Jy sigma=0.407879 ! Inverting map ! Added new window around map position (4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364961 Jy ! Component: 100 - total flux cleaned = 0.00492396 Jy ! Component: 150 - total flux cleaned = 0.00581129 Jy ! Component: 200 - total flux cleaned = 0.00653959 Jy ! Total flux subtracted in 200 components = 0.00653959 Jy ! Clean residual min=-0.003082 max=0.002647 Jy/beam ! Clean residual mean=0.000001 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.815838 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 162 components and 0.815838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053271Jy sigma=0.405371 ! Fit after self-cal, rms=0.053263Jy sigma=0.405276 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053263Jy sigma=0.405276 ! Fit after self-cal, rms=0.051278Jy sigma=0.392148 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9332 mas, bmaj=1.24 mas, bpa=0.8492 degrees ! Estimated noise=0.450852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000876385 Jy ! Component: 100 - total flux cleaned = 0.00132495 Jy ! Component: 150 - total flux cleaned = 0.00165053 Jy ! Component: 200 - total flux cleaned = 0.00206065 Jy ! Total flux subtracted in 200 components = 0.00206065 Jy ! Clean residual min=-0.001788 max=0.001686 Jy/beam ! Clean residual mean=-0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.817898 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 177 components and 0.817898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051104Jy sigma=0.390719 ! Fit after self-cal, rms=0.051096Jy sigma=0.390651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601574 Jy ! Component: 100 - total flux cleaned = 0.000912175 Jy ! Component: 150 - total flux cleaned = 0.00129636 Jy ! Component: 200 - total flux cleaned = 0.00156567 Jy ! Total flux subtracted in 200 components = 0.00156567 Jy ! Clean residual min=-0.001658 max=0.001577 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.819464 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 184 components and 0.819464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051011Jy sigma=0.389985 ! Fit after self-cal, rms=0.051008Jy sigma=0.389966 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051008Jy sigma=0.389966 ! Fit after self-cal, rms=0.050931Jy sigma=0.389706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9317 mas, bmaj=1.24 mas, bpa=0.9557 degrees ! Estimated noise=0.450592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735308 Jy ! Component: 100 - total flux cleaned = 0.000976383 Jy ! Component: 150 - total flux cleaned = 0.0012003 Jy ! Component: 200 - total flux cleaned = 0.00144973 Jy ! Total flux subtracted in 200 components = 0.00144973 Jy ! Clean residual min=-0.001545 max=0.001596 Jy/beam ! Clean residual mean=-0.000001 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.820914 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 192 components and 0.820914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050851Jy sigma=0.389063 ! Fit after self-cal, rms=0.050848Jy sigma=0.389039 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110439 Jy ! Component: 100 - total flux cleaned = 0.00128732 Jy ! Component: 150 - total flux cleaned = 0.00157513 Jy ! Component: 200 - total flux cleaned = 0.00180731 Jy ! Total flux subtracted in 200 components = 0.00180731 Jy ! Clean residual min=-0.001426 max=0.001399 Jy/beam ! Clean residual mean=-0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.822721 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 205 components and 0.822721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050769Jy sigma=0.388445 ! Fit after self-cal, rms=0.050767Jy sigma=0.388426 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050767Jy sigma=0.388426 ! Fit after self-cal, rms=0.050720Jy sigma=0.388317 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.209 mas, bmaj=2.382 mas, bpa=9.818 degrees ! Estimated noise=0.636028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013881 Jy ! Component: 100 - total flux cleaned = 0.00211815 Jy ! Component: 150 - total flux cleaned = 0.00237718 Jy ! Component: 200 - total flux cleaned = 0.00263744 Jy ! Total flux subtracted in 200 components = 0.00263744 Jy ! Clean residual min=-0.001537 max=0.001563 Jy/beam ! Clean residual mean=-0.000003 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.825358 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 228 components and 0.825358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050692Jy sigma=0.388112 ! Fit after self-cal, rms=0.050690Jy sigma=0.388093 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415685 Jy ! Component: 100 - total flux cleaned = 0.00065103 Jy ! Component: 150 - total flux cleaned = 0.000888439 Jy ! Component: 200 - total flux cleaned = 0.00108413 Jy ! Total flux subtracted in 200 components = 0.00108413 Jy ! Clean residual min=-0.001442 max=0.001538 Jy/beam ! Clean residual mean=-0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.826442 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 232 components and 0.826442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050677Jy sigma=0.388005 ! Fit after self-cal, rms=0.050677Jy sigma=0.387994 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9307 mas, bmaj=1.24 mas, bpa=1.032 degrees ! Estimated noise=0.450406 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9307 x 1.24 at 1.032 degrees (North through East) ! Clean map min=-0.0011942 max=0.46312 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.721 mas, bmaj=0.9677 mas, bpa=1.152 degrees ! Estimated noise=0.935138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.328032 Jy ! Component: 100 - total flux cleaned = 0.462158 Jy ! Component: 150 - total flux cleaned = 0.536613 Jy ! Component: 200 - total flux cleaned = 0.584112 Jy ! Total flux subtracted in 200 components = 0.584112 Jy ! Clean residual min=-0.009045 max=0.026115 Jy/beam ! Clean residual mean=-0.000005 rms=0.002416 Jy/beam ! Combined flux in latest and established models = 0.584113 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.584113 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9307 mas, bmaj=1.24 mas, bpa=1.032 degrees ! Estimated noise=0.450406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562003 Jy ! Component: 100 - total flux cleaned = 0.0931496 Jy ! Component: 150 - total flux cleaned = 0.120033 Jy ! Component: 200 - total flux cleaned = 0.140439 Jy ! Total flux subtracted in 200 components = 0.140439 Jy ! Clean residual min=-0.004407 max=0.011891 Jy/beam ! Clean residual mean=-0.000002 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.724552 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 60 components and 0.724552 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157884 Jy ! Component: 100 - total flux cleaned = 0.0282707 Jy ! Component: 150 - total flux cleaned = 0.0384148 Jy ! Component: 200 - total flux cleaned = 0.0467681 Jy ! Total flux subtracted in 200 components = 0.0467681 Jy ! Clean residual min=-0.002609 max=0.005524 Jy/beam ! Clean residual mean=-0.000001 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.77132 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 96 components and 0.77132 Jy ! Inverting map ! Added new window around map position (2.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704261 Jy ! Component: 100 - total flux cleaned = 0.0129681 Jy ! Component: 150 - total flux cleaned = 0.0180357 Jy ! Component: 200 - total flux cleaned = 0.0224173 Jy ! Total flux subtracted in 200 components = 0.0224173 Jy ! Clean residual min=-0.001891 max=0.003114 Jy/beam ! Clean residual mean=-0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.793737 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 120 components and 0.793737 Jy ! Inverting map ! Added new window around map position (-0.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039036 Jy ! Component: 100 - total flux cleaned = 0.00729335 Jy ! Component: 150 - total flux cleaned = 0.0102921 Jy ! Component: 200 - total flux cleaned = 0.0129627 Jy ! Total flux subtracted in 200 components = 0.0129627 Jy ! Clean residual min=-0.001556 max=0.002206 Jy/beam ! Clean residual mean=-0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.8067 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 135 components and 0.8067 Jy ! Inverting map ! Added new window around map position (5.8, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023166 Jy ! Component: 100 - total flux cleaned = 0.0039955 Jy ! Component: 150 - total flux cleaned = 0.00545715 Jy ! Component: 200 - total flux cleaned = 0.00680697 Jy ! Total flux subtracted in 200 components = 0.00680697 Jy ! Clean residual min=-0.001379 max=0.001480 Jy/beam ! Clean residual mean=-0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.813507 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 147 components and 0.813507 Jy ! Inverting map ! Added new window around map position (1.6, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143628 Jy ! Component: 100 - total flux cleaned = 0.00260505 Jy ! Component: 150 - total flux cleaned = 0.00351424 Jy ! Component: 200 - total flux cleaned = 0.00442446 Jy ! Total flux subtracted in 200 components = 0.00442446 Jy ! Clean residual min=-0.001306 max=0.001349 Jy/beam ! Clean residual mean=-0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.817931 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 159 components and 0.817931 Jy ! Inverting map ! Added new window around map position (-8, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112241 Jy ! Component: 100 - total flux cleaned = 0.00168819 Jy ! Component: 150 - total flux cleaned = 0.00222834 Jy ! Component: 200 - total flux cleaned = 0.00269657 Jy ! Total flux subtracted in 200 components = 0.00269657 Jy ! Clean residual min=-0.001217 max=0.001202 Jy/beam ! Clean residual mean=-0.000002 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.820628 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 178 components and 0.820628 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.209 mas, bmaj=2.382 mas, bpa=9.818 degrees ! Estimated noise=0.636028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186171 Jy ! Component: 100 - total flux cleaned = 0.0032887 Jy ! Component: 150 - total flux cleaned = 0.00446797 Jy ! Component: 200 - total flux cleaned = 0.00547045 Jy ! Total flux subtracted in 200 components = 0.00547045 Jy ! Clean residual min=-0.001286 max=0.001252 Jy/beam ! Clean residual mean=-0.000005 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.826099 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736099 Jy ! Component: 100 - total flux cleaned = 0.00138806 Jy ! Component: 150 - total flux cleaned = 0.00189154 Jy ! Component: 200 - total flux cleaned = 0.00229759 Jy ! Total flux subtracted in 200 components = 0.00229759 Jy ! Clean residual min=-0.001280 max=0.001250 Jy/beam ! Clean residual mean=-0.000005 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.828396 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 236 components and 0.828396 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9307 mas, bmaj=1.24 mas, bpa=1.032 degrees ! Estimated noise=0.450406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000699611 Jy ! Component: 100 - total flux cleaned = -0.000784147 Jy ! Component: 150 - total flux cleaned = -0.000710644 Jy ! Component: 200 - total flux cleaned = -0.000535904 Jy ! Total flux subtracted in 200 components = -0.000535904 Jy ! Clean residual min=-0.001166 max=0.001102 Jy/beam ! Clean residual mean=-0.000002 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.82786 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 245 components and 0.82786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050558Jy sigma=0.387065 ! Fit after self-cal, rms=0.050524Jy sigma=0.386807 wmodel J0207+6246_X_map.mod ! Writing 245 model components to file: J0207+6246_X_map.mod wobs J0207+6246_X_uvs.fits ! Writing UV FITS file: J0207+6246_X_uvs.fits wwins J0207+6246_X_map.win ! wwins: Wrote 14 windows to J0207+6246_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.17048e-05 Jy ! Component: 100 - total flux cleaned = 7.95248e-05 Jy ! Component: 150 - total flux cleaned = 7.96026e-05 Jy ! Component: 200 - total flux cleaned = 4.46133e-05 Jy ! Component: 250 - total flux cleaned = 6.21299e-05 Jy ! Component: 300 - total flux cleaned = 2.81838e-05 Jy ! Component: 350 - total flux cleaned = 1.16037e-05 Jy ! Component: 400 - total flux cleaned = 2.81005e-05 Jy ! Component: 450 - total flux cleaned = -2.08234e-05 Jy ! Component: 500 - total flux cleaned = -3.67322e-05 Jy ! Component: 550 - total flux cleaned = -6.80384e-05 Jy ! Component: 600 - total flux cleaned = -3.69396e-05 Jy ! Component: 650 - total flux cleaned = -3.69472e-05 Jy ! Component: 700 - total flux cleaned = -2.14419e-05 Jy ! Component: 750 - total flux cleaned = -6.31484e-06 Jy ! Component: 800 - total flux cleaned = 8.6552e-06 Jy ! Component: 850 - total flux cleaned = 2.36726e-05 Jy ! Component: 900 - total flux cleaned = 5.28152e-05 Jy ! Component: 950 - total flux cleaned = 0.000124809 Jy ! Component: 1000 - total flux cleaned = 8.17788e-05 Jy ! Component: 1050 - total flux cleaned = 0.000110093 Jy ! Component: 1100 - total flux cleaned = 9.61162e-05 Jy ! Component: 1150 - total flux cleaned = 0.00011015 Jy ! Component: 1200 - total flux cleaned = 0.000110145 Jy ! Component: 1250 - total flux cleaned = 0.000151052 Jy ! Component: 1300 - total flux cleaned = 0.000150831 Jy ! Component: 1350 - total flux cleaned = 0.000190986 Jy ! Component: 1400 - total flux cleaned = 0.000151152 Jy ! Component: 1450 - total flux cleaned = 0.00020382 Jy ! Component: 1500 - total flux cleaned = 0.000204018 Jy ! Component: 1550 - total flux cleaned = 0.000178195 Jy ! Component: 1600 - total flux cleaned = 0.000190982 Jy ! Component: 1650 - total flux cleaned = 0.000203962 Jy ! Component: 1700 - total flux cleaned = 0.000204066 Jy ! Component: 1750 - total flux cleaned = 0.000204049 Jy ! Component: 1800 - total flux cleaned = 0.000228878 Jy ! Component: 1850 - total flux cleaned = 0.000265633 Jy ! Component: 1900 - total flux cleaned = 0.000216681 Jy ! Component: 1950 - total flux cleaned = 0.000265216 Jy ! Component: 2000 - total flux cleaned = 0.000253258 Jy ! Component: 2050 - total flux cleaned = 0.000241298 Jy ! Component: 2100 - total flux cleaned = 0.000241347 Jy ! Component: 2150 - total flux cleaned = 0.000264837 Jy ! Component: 2200 - total flux cleaned = 0.000288335 Jy ! Component: 2250 - total flux cleaned = 0.000276766 Jy ! Component: 2300 - total flux cleaned = 0.000265318 Jy ! Component: 2350 - total flux cleaned = 0.000322853 Jy ! Component: 2400 - total flux cleaned = 0.000311464 Jy ! Component: 2450 - total flux cleaned = 0.000322726 Jy ! Component: 2500 - total flux cleaned = 0.000345258 Jy ! Component: 2550 - total flux cleaned = 0.000378769 Jy ! Component: 2600 - total flux cleaned = 0.000423365 Jy ! Component: 2650 - total flux cleaned = 0.000456566 Jy ! Component: 2700 - total flux cleaned = 0.000456559 Jy ! Component: 2750 - total flux cleaned = 0.000478477 Jy ! Component: 2800 - total flux cleaned = 0.000500303 Jy ! Component: 2850 - total flux cleaned = 0.000543489 Jy ! Component: 2900 - total flux cleaned = 0.000564956 Jy ! Component: 2950 - total flux cleaned = 0.000618407 Jy ! Component: 3000 - total flux cleaned = 0.000629112 Jy ! Component: 3050 - total flux cleaned = 0.000618483 Jy ! Component: 3100 - total flux cleaned = 0.000650074 Jy ! Component: 3150 - total flux cleaned = 0.000671017 Jy ! Component: 3200 - total flux cleaned = 0.000743802 Jy ! Component: 3250 - total flux cleaned = 0.000723153 Jy ! Component: 3300 - total flux cleaned = 0.000733516 Jy ! Component: 3350 - total flux cleaned = 0.000774409 Jy ! Component: 3400 - total flux cleaned = 0.000835415 Jy ! Component: 3450 - total flux cleaned = 0.000845498 Jy ! Component: 3500 - total flux cleaned = 0.000845432 Jy ! Component: 3550 - total flux cleaned = 0.000915513 Jy ! Component: 3600 - total flux cleaned = 0.000915525 Jy ! Component: 3650 - total flux cleaned = 0.000925463 Jy ! Component: 3700 - total flux cleaned = 0.000945269 Jy ! Component: 3750 - total flux cleaned = 0.000925683 Jy ! Component: 3800 - total flux cleaned = 0.000955013 Jy ! Component: 3850 - total flux cleaned = 0.00103276 Jy ! Component: 3900 - total flux cleaned = 0.00104242 Jy ! Component: 3950 - total flux cleaned = 0.00104246 Jy ! Component: 4000 - total flux cleaned = 0.0010807 Jy ! Component: 4050 - total flux cleaned = 0.00109013 Jy ! Total flux subtracted in 4096 components = 0.00109014 Jy ! Clean residual min=-0.000533 max=0.000525 Jy/beam ! Clean residual mean=-0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.82895 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 577 components and 0.82895 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0207+6246_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9307 x 1.24 at 1.032 degrees (North through East) ! Clean map min=-0.00072542 max=0.46431 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0207+6246_X_map.fits wmodel /image_prod/ug002_uva//J0207+6246_X_map.mod ! Writing 577 model components to file: /image_prod/ug002_uva//J0207+6246_X_map.mod wobs /image_prod/ug002_uva//J0207+6246_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0207+6246_X_uvs.fits wwins /image_prod/ug002_uva//J0207+6246_X_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J0207+6246_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.464306 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000158269 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.102262 0.102262 0.204523 0.409046 0.818092 1.63618 3.27237 6.54474 13.0895 26.179 52.3579 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.464 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2933.65 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0207+6246_X_dfm.log closed on Wed Mar 4 19:24:56 2020