! Started logfile: /image_prod/ug002_uva//J0201-1132_S_dfm.log on Wed Mar  4 19:21:02 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0201-1132_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0201-1132_S_uva.fits
! AN table 1: 30 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.957037 visibilities/baseline/integration-bin.
! Found source: J0201-1132
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3876 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0201-1132_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.193333Jy  sigma=7.625845
! Fit after  self-cal, rms=0.589005Jy  sigma=3.900922
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.722 mas, bmaj=6.918 mas, bpa=-3.276 degrees
! Estimated noise=2.39035 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.352184 Jy
! Component: 100  -  total flux cleaned = 0.478668 Jy
! Total flux subtracted in 100 components = 0.478668 Jy
! Clean residual min=-0.060691 max=0.126221 Jy/beam
! Clean residual mean=-0.000135 rms=0.014971 Jy/beam
! Combined flux in latest and established models = 0.478668 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.478668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.304899Jy  sigma=1.660823
! Fit after  self-cal, rms=0.304580Jy  sigma=1.657562
! Inverting map 
! Added new window around map position (-10, 18.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11289 Jy
! Component: 100  -  total flux cleaned = 0.176409 Jy
! Total flux subtracted in 100 components = 0.176409 Jy
! Clean residual min=-0.042317 max=0.060420 Jy/beam
! Clean residual mean=-0.000092 rms=0.010500 Jy/beam
! Combined flux in latest and established models = 0.655077 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.655077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.248658Jy  sigma=1.270673
! Fit after  self-cal, rms=0.243947Jy  sigma=1.242514
! Inverting map 
! Added new window around map position (-6.5, 11).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0642188 Jy
! Component: 100  -  total flux cleaned = 0.106243 Jy
! Total flux subtracted in 100 components = 0.106243 Jy
! Clean residual min=-0.034318 max=0.039996 Jy/beam
! Clean residual mean=-0.000049 rms=0.008274 Jy/beam
! Combined flux in latest and established models = 0.76132 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.76132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.219363Jy  sigma=1.079982
! Fit after  self-cal, rms=0.217759Jy  sigma=1.070595
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.148 mas, bmaj=7.737 mas, bpa=-2.994 degrees
! Estimated noise=1.8301 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0450645 Jy
! Component: 100  -  total flux cleaned = 0.0756763 Jy
! Component: 150  -  total flux cleaned = 0.097684 Jy
! Component: 200  -  total flux cleaned = 0.11402 Jy
! Total flux subtracted in 200 components = 0.11402 Jy
! Clean residual min=-0.035304 max=0.042807 Jy/beam
! Clean residual mean=0.000046 rms=0.008099 Jy/beam
! Combined flux in latest and established models = 0.87534 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 60 components and 0.87534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.201804Jy  sigma=0.996820
! Fit after  self-cal, rms=0.201255Jy  sigma=0.993993
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.148 x 7.737 at -2.994 degrees (North through East)
! Clean map  min=-0.034028  max=0.45652 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.08     HN        1.08     KP        0.99     
!   LA        1.02     MK        1.03     NL        0.92     OV        0.66     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        1.15     HN        1.04     KP        0.97     
!   LA        0.96     MK        0.99     NL        0.95     OV        1.02     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.15     HN        1.07     KP        0.95     
!   LA        1.07     MK        1.00     NL        0.94     OV        0.68     
!   PT        1.05     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.201255Jy  sigma=0.993993
! Fit after  self-cal, rms=0.180013Jy  sigma=0.821235
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=7.743 mas, bpa=-2.374 degrees
! Estimated noise=1.80796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17, 36.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334105 Jy
! Component: 100  -  total flux cleaned = 0.0525163 Jy
! Component: 150  -  total flux cleaned = 0.0659593 Jy
! Component: 200  -  total flux cleaned = 0.0714801 Jy
! Total flux subtracted in 200 components = 0.0714801 Jy
! Clean residual min=-0.021817 max=0.019922 Jy/beam
! Clean residual mean=-0.000006 rms=0.005309 Jy/beam
! Combined flux in latest and established models = 0.94682 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 91 components and 0.94682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.170963Jy  sigma=0.761600
! Fit after  self-cal, rms=0.170743Jy  sigma=0.755295
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.170743Jy  sigma=0.755295
! Fit after  self-cal, rms=0.111526Jy  sigma=0.660211
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.161 mas, bmaj=7.762 mas, bpa=-2.166 degrees
! Estimated noise=1.798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145629 Jy
! Component: 100  -  total flux cleaned = 0.0203352 Jy
! Component: 150  -  total flux cleaned = 0.0249751 Jy
! Component: 200  -  total flux cleaned = 0.0281083 Jy
! Total flux subtracted in 200 components = 0.0281083 Jy
! Clean residual min=-0.013766 max=0.014121 Jy/beam
! Clean residual mean=-0.000014 rms=0.003509 Jy/beam
! Combined flux in latest and established models = 0.974928 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 117 components and 0.974928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108861Jy  sigma=0.640938
! Fit after  self-cal, rms=0.108547Jy  sigma=0.639789
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283471 Jy
! Component: 100  -  total flux cleaned = 0.004754 Jy
! Component: 150  -  total flux cleaned = 0.00644655 Jy
! Component: 200  -  total flux cleaned = 0.00778485 Jy
! Total flux subtracted in 200 components = 0.00778485 Jy
! Clean residual min=-0.012836 max=0.013207 Jy/beam
! Clean residual mean=-0.000012 rms=0.003389 Jy/beam
! Combined flux in latest and established models = 0.982713 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 127 components and 0.982713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107886Jy  sigma=0.634670
! Fit after  self-cal, rms=0.107773Jy  sigma=0.634450
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107773Jy  sigma=0.634450
! Fit after  self-cal, rms=0.106491Jy  sigma=0.629973
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=7.779 mas, bpa=-2.219 degrees
! Estimated noise=1.78979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00743696 Jy
! Component: 100  -  total flux cleaned = 0.0111658 Jy
! Component: 150  -  total flux cleaned = 0.0141481 Jy
! Component: 200  -  total flux cleaned = 0.0169012 Jy
! Total flux subtracted in 200 components = 0.0169012 Jy
! Clean residual min=-0.012330 max=0.012783 Jy/beam
! Clean residual mean=-0.000014 rms=0.003160 Jy/beam
! Combined flux in latest and established models = 0.999614 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 140 components and 0.999614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105615Jy  sigma=0.623771
! Fit after  self-cal, rms=0.105532Jy  sigma=0.623523
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180069 Jy
! Component: 100  -  total flux cleaned = 0.0032714 Jy
! Component: 150  -  total flux cleaned = 0.00432875 Jy
! Component: 200  -  total flux cleaned = 0.00481246 Jy
! Total flux subtracted in 200 components = 0.00481246 Jy
! Clean residual min=-0.011855 max=0.012238 Jy/beam
! Clean residual mean=-0.000014 rms=0.003102 Jy/beam
! Combined flux in latest and established models = 1.00443 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 151 components and 1.00443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105206Jy  sigma=0.620965
! Fit after  self-cal, rms=0.105160Jy  sigma=0.620881
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105160Jy  sigma=0.620881
! Fit after  self-cal, rms=0.104626Jy  sigma=0.619210
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.281 mas, bmaj=14.09 mas, bpa=0.7096 degrees
! Estimated noise=2.34664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00671969 Jy
! Component: 100  -  total flux cleaned = 0.00860927 Jy
! Component: 150  -  total flux cleaned = 0.00950054 Jy
! Component: 200  -  total flux cleaned = 0.0101305 Jy
! Total flux subtracted in 200 components = 0.0101305 Jy
! Clean residual min=-0.019421 max=0.017239 Jy/beam
! Clean residual mean=-0.000027 rms=0.005420 Jy/beam
! Combined flux in latest and established models = 1.01456 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 172 components and 1.01456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104524Jy  sigma=0.617294
! Fit after  self-cal, rms=0.104463Jy  sigma=0.617090
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103211 Jy
! Component: 100  -  total flux cleaned = 0.00157669 Jy
! Component: 150  -  total flux cleaned = 0.00177336 Jy
! Component: 200  -  total flux cleaned = 0.0019544 Jy
! Total flux subtracted in 200 components = 0.0019544 Jy
! Clean residual min=-0.019135 max=0.016751 Jy/beam
! Clean residual mean=-0.000026 rms=0.005365 Jy/beam
! Combined flux in latest and established models = 1.01651 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 182 components and 1.01651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104461Jy  sigma=0.616416
! Fit after  self-cal, rms=0.104409Jy  sigma=0.616351
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=7.786 mas, bpa=-2.227 degrees
! Estimated noise=1.78448 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.165 x 7.786 at -2.227 degrees (North through East)
! Clean map  min=-0.010605  max=0.43816 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.729 mas, bmaj=6.929 mas, bpa=-2.73 degrees
! Estimated noise=2.38368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.354074 Jy
! Component: 100  -  total flux cleaned = 0.512818 Jy
! Component: 150  -  total flux cleaned = 0.614762 Jy
! Component: 200  -  total flux cleaned = 0.684914 Jy
! Total flux subtracted in 200 components = 0.684914 Jy
! Clean residual min=-0.027890 max=0.039105 Jy/beam
! Clean residual mean=-0.000076 rms=0.007590 Jy/beam
! Combined flux in latest and established models = 0.684914 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.684914 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=7.786 mas, bpa=-2.227 degrees
! Estimated noise=1.78448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0671861 Jy
! Component: 100  -  total flux cleaned = 0.116886 Jy
! Component: 150  -  total flux cleaned = 0.156204 Jy
! Component: 200  -  total flux cleaned = 0.187849 Jy
! Total flux subtracted in 200 components = 0.187849 Jy
! Clean residual min=-0.018498 max=0.019758 Jy/beam
! Clean residual mean=-0.000046 rms=0.004947 Jy/beam
! Combined flux in latest and established models = 0.872763 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 93 components and 0.872763 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.281 mas, bmaj=14.09 mas, bpa=0.7096 degrees
! Estimated noise=2.34664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0416052 Jy
! Component: 100  -  total flux cleaned = 0.0696188 Jy
! Component: 150  -  total flux cleaned = 0.0889388 Jy
! Component: 200  -  total flux cleaned = 0.102498 Jy
! Total flux subtracted in 200 components = 0.102498 Jy
! Clean residual min=-0.022819 max=0.020013 Jy/beam
! Clean residual mean=-0.000050 rms=0.005752 Jy/beam
! Combined flux in latest and established models = 0.975261 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100114 Jy
! Component: 100  -  total flux cleaned = 0.0176151 Jy
! Component: 150  -  total flux cleaned = 0.0224317 Jy
! Component: 200  -  total flux cleaned = 0.0253813 Jy
! Total flux subtracted in 200 components = 0.0253813 Jy
! Clean residual min=-0.020524 max=0.017544 Jy/beam
! Clean residual mean=-0.000037 rms=0.005388 Jy/beam
! Combined flux in latest and established models = 1.00064 Jy
! Adding 120 model components to the UV plane model.
! The established model now contains 187 components and 1.00064 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=7.786 mas, bpa=-2.227 degrees
! Estimated noise=1.78448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00659139 Jy
! Component: 100  -  total flux cleaned = 0.01008 Jy
! Component: 150  -  total flux cleaned = 0.012038 Jy
! Component: 200  -  total flux cleaned = 0.0130542 Jy
! Total flux subtracted in 200 components = 0.0130542 Jy
! Clean residual min=-0.012224 max=0.012218 Jy/beam
! Clean residual mean=-0.000017 rms=0.003046 Jy/beam
! Combined flux in latest and established models = 1.0137 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 214 components and 1.0137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105369Jy  sigma=0.624967
! Fit after  self-cal, rms=0.105138Jy  sigma=0.624026
wmodel J0201-1132_S_map.mod
! Writing 214 model components to file: J0201-1132_S_map.mod
wobs   J0201-1132_S_uvs.fits
! Writing UV FITS file: J0201-1132_S_uvs.fits
wwins  J0201-1132_S_map.win
! wwins: Wrote 5 windows to J0201-1132_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234084 Jy
! Component: 100  -  total flux cleaned = 0.000776885 Jy
! Component: 150  -  total flux cleaned = 0.00172766 Jy
! Component: 200  -  total flux cleaned = 0.00263766 Jy
! Component: 250  -  total flux cleaned = 0.0029867 Jy
! Component: 300  -  total flux cleaned = 0.00332441 Jy
! Component: 350  -  total flux cleaned = 0.00364829 Jy
! Component: 400  -  total flux cleaned = 0.00380405 Jy
! Component: 450  -  total flux cleaned = 0.00425007 Jy
! Component: 500  -  total flux cleaned = 0.00468237 Jy
! Component: 550  -  total flux cleaned = 0.00510461 Jy
! Component: 600  -  total flux cleaned = 0.0056505 Jy
! Component: 650  -  total flux cleaned = 0.006183 Jy
! Component: 700  -  total flux cleaned = 0.00656891 Jy
! Component: 750  -  total flux cleaned = 0.0069476 Jy
! Component: 800  -  total flux cleaned = 0.00719063 Jy
! Component: 850  -  total flux cleaned = 0.00755172 Jy
! Component: 900  -  total flux cleaned = 0.00778282 Jy
! Component: 950  -  total flux cleaned = 0.00812301 Jy
! Component: 1000  -  total flux cleaned = 0.00856819 Jy
! Component: 1050  -  total flux cleaned = 0.00867762 Jy
! Component: 1100  -  total flux cleaned = 0.00900013 Jy
! Component: 1150  -  total flux cleaned = 0.00889732 Jy
! Component: 1200  -  total flux cleaned = 0.00910329 Jy
! Component: 1250  -  total flux cleaned = 0.00930645 Jy
! Component: 1300  -  total flux cleaned = 0.00950477 Jy
! Component: 1350  -  total flux cleaned = 0.0100925 Jy
! Component: 1400  -  total flux cleaned = 0.0103791 Jy
! Component: 1450  -  total flux cleaned = 0.0107568 Jy
! Component: 1500  -  total flux cleaned = 0.0113144 Jy
! Component: 1550  -  total flux cleaned = 0.0116805 Jy
! Component: 1600  -  total flux cleaned = 0.0121304 Jy
! Component: 1650  -  total flux cleaned = 0.0124857 Jy
! Component: 1700  -  total flux cleaned = 0.0130118 Jy
! Component: 1750  -  total flux cleaned = 0.013099 Jy
! Component: 1800  -  total flux cleaned = 0.013781 Jy
! Component: 1850  -  total flux cleaned = 0.013949 Jy
! Component: 1900  -  total flux cleaned = 0.0143634 Jy
! Component: 1950  -  total flux cleaned = 0.014609 Jy
! Component: 2000  -  total flux cleaned = 0.0150131 Jy
! Component: 2050  -  total flux cleaned = 0.0152524 Jy
! Component: 2100  -  total flux cleaned = 0.0155665 Jy
! Component: 2150  -  total flux cleaned = 0.015644 Jy
! Component: 2200  -  total flux cleaned = 0.0160282 Jy
! Component: 2250  -  total flux cleaned = 0.0159538 Jy
! Component: 2300  -  total flux cleaned = 0.016179 Jy
! Component: 2350  -  total flux cleaned = 0.0164009 Jy
! Component: 2400  -  total flux cleaned = 0.0164008 Jy
! Component: 2450  -  total flux cleaned = 0.0164009 Jy
! Component: 2500  -  total flux cleaned = 0.0164733 Jy
! Component: 2550  -  total flux cleaned = 0.016473 Jy
! Component: 2600  -  total flux cleaned = 0.0167514 Jy
! Component: 2650  -  total flux cleaned = 0.016612 Jy
! Component: 2700  -  total flux cleaned = 0.016407 Jy
! Component: 2750  -  total flux cleaned = 0.0164085 Jy
! Component: 2800  -  total flux cleaned = 0.0164077 Jy
! Component: 2850  -  total flux cleaned = 0.0163419 Jy
! Component: 2900  -  total flux cleaned = 0.0161459 Jy
! Component: 2950  -  total flux cleaned = 0.016276 Jy
! Component: 3000  -  total flux cleaned = 0.0160198 Jy
! Component: 3050  -  total flux cleaned = 0.0157661 Jy
! Component: 3100  -  total flux cleaned = 0.0158917 Jy
! Component: 3150  -  total flux cleaned = 0.0156424 Jy
! Component: 3200  -  total flux cleaned = 0.0154576 Jy
! Component: 3250  -  total flux cleaned = 0.0152746 Jy
! Component: 3300  -  total flux cleaned = 0.0152739 Jy
! Component: 3350  -  total flux cleaned = 0.0150333 Jy
! Component: 3400  -  total flux cleaned = 0.0149735 Jy
! Component: 3450  -  total flux cleaned = 0.0146788 Jy
! Component: 3500  -  total flux cleaned = 0.0145043 Jy
! Component: 3550  -  total flux cleaned = 0.0145036 Jy
! Component: 3600  -  total flux cleaned = 0.0141587 Jy
! Component: 3650  -  total flux cleaned = 0.0142156 Jy
! Component: 3700  -  total flux cleaned = 0.0141018 Jy
! Component: 3750  -  total flux cleaned = 0.0139344 Jy
! Component: 3800  -  total flux cleaned = 0.0139342 Jy
! Component: 3850  -  total flux cleaned = 0.0138239 Jy
! Component: 3900  -  total flux cleaned = 0.0137701 Jy
! Component: 3950  -  total flux cleaned = 0.0139329 Jy
! Component: 4000  -  total flux cleaned = 0.0138246 Jy
! Component: 4050  -  total flux cleaned = 0.0136644 Jy
! Total flux subtracted in 4096 components = 0.0137176 Jy
! Clean residual min=-0.002690 max=0.002900 Jy/beam
! Clean residual mean=0.000008 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 1.02741 Jy
keep
! Adding 407 model components to the UV plane model.
! The established model now contains 621 components and 1.02741 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0201-1132_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.165 x 7.786 at -2.227 degrees (North through East)
! Clean map  min=-0.0071774  max=0.43652 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0201-1132_S_map.fits
wmodel /image_prod/ug002_uva//J0201-1132_S_map.mod
! Writing 621 model components to file: /image_prod/ug002_uva//J0201-1132_S_map.mod
wobs   /image_prod/ug002_uva//J0201-1132_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0201-1132_S_uvs.fits
wwins  /image_prod/ug002_uva//J0201-1132_S_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0201-1132_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.436519 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00118585 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.81498 0.81498 1.62996 3.25992 6.51984 13.0397 26.0793 52.1587
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0035 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.436 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  368.107 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0201-1132_S_dfm.log closed on Wed Mar  4 19:21:06 2020