! Started logfile: /image_prod/ug002_uva//J0158+1655_S_dfm.log on Wed Mar  4 19:19:39 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0158+1655_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0158+1655_S_uva.fits
! AN table 1: 150 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.86563 visibilities/baseline/integration-bin.
! Found source: J0158+1655
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 17529 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0158+1655_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007475Jy  sigma=8.599093
! Fit after  self-cal, rms=0.881515Jy  sigma=7.449243
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=7.139 mas, bpa=-8.743 degrees
! Estimated noise=1.17712 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0937019 Jy
! Component: 100  -  total flux cleaned = 0.11728 Jy
! Total flux subtracted in 100 components = 0.11728 Jy
! Clean residual min=-0.009985 max=0.025647 Jy/beam
! Clean residual mean=-0.000029 rms=0.002486 Jy/beam
! Combined flux in latest and established models = 0.11728 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.11728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082815Jy  sigma=0.626372
! Fit after  self-cal, rms=0.082599Jy  sigma=0.625611
! Inverting map 
! Added new window around map position (8.5, 6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217689 Jy
! Component: 100  -  total flux cleaned = 0.0331644 Jy
! Total flux subtracted in 100 components = 0.0331644 Jy
! Clean residual min=-0.007000 max=0.009786 Jy/beam
! Clean residual mean=-0.000017 rms=0.001800 Jy/beam
! Combined flux in latest and established models = 0.150444 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 34 components and 0.150444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077422Jy  sigma=0.554653
! Fit after  self-cal, rms=0.076612Jy  sigma=0.546825
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102359 Jy
! Component: 100  -  total flux cleaned = 0.0166714 Jy
! Total flux subtracted in 100 components = 0.0166714 Jy
! Clean residual min=-0.005441 max=0.007626 Jy/beam
! Clean residual mean=-0.000011 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.167115 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.167115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075341Jy  sigma=0.524764
! Fit after  self-cal, rms=0.075207Jy  sigma=0.523220
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.133 mas, bmaj=7.719 mas, bpa=-8.364 degrees
! Estimated noise=0.649334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109241 Jy
! Component: 100  -  total flux cleaned = 0.0180773 Jy
! Component: 150  -  total flux cleaned = 0.0220936 Jy
! Component: 200  -  total flux cleaned = 0.0248232 Jy
! Total flux subtracted in 200 components = 0.0248232 Jy
! Clean residual min=-0.004667 max=0.008401 Jy/beam
! Clean residual mean=-0.000007 rms=0.001434 Jy/beam
! Combined flux in latest and established models = 0.191939 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 74 components and 0.191939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073531Jy  sigma=0.499146
! Fit after  self-cal, rms=0.073435Jy  sigma=0.497811
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.133 x 7.719 at -8.364 degrees (North through East)
! Clean map  min=-0.0044208  max=0.1191 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.45     FD        0.93     HN        1.03     KP        0.96     
!   LA        0.97     MK        1.00     NL        0.93     OV        0.95     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        3.00     FD        0.95     HN        1.03     KP        0.94     
!   LA        0.95     MK        1.04     NL        0.97     OV        0.94     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.57     FD        0.96     HN        1.02     KP        0.98     
!   LA        0.95     MK        1.03     NL        1.08     OV        0.93     
!   PT        0.97     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.073435Jy  sigma=0.497811
! Fit after  self-cal, rms=0.101209Jy  sigma=0.467001
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.13 mas, bmaj=8.011 mas, bpa=-8.267 degrees
! Estimated noise=0.660337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103946 Jy
! Component: 100  -  total flux cleaned = -0.000441656 Jy
! Component: 150  -  total flux cleaned = -0.000624502 Jy
! Component: 200  -  total flux cleaned = -0.000867706 Jy
! Total flux subtracted in 200 components = -0.000867706 Jy
! Clean residual min=-0.003182 max=0.003819 Jy/beam
! Clean residual mean=0.000003 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.191071 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.191071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100839Jy  sigma=0.464632
! Fit after  self-cal, rms=0.101091Jy  sigma=0.464107
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101091Jy  sigma=0.464107
! Fit after  self-cal, rms=0.098384Jy  sigma=0.453794
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.132 mas, bmaj=8.004 mas, bpa=-8.467 degrees
! Estimated noise=0.659667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128143 Jy
! Component: 100  -  total flux cleaned = -0.00028136 Jy
! Component: 150  -  total flux cleaned = -0.00034859 Jy
! Component: 200  -  total flux cleaned = -0.00034884 Jy
! Total flux subtracted in 200 components = -0.00034884 Jy
! Clean residual min=-0.001841 max=0.002061 Jy/beam
! Clean residual mean=0.000000 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.190722 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 112 components and 0.190722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098249Jy  sigma=0.452707
! Fit after  self-cal, rms=0.098290Jy  sigma=0.452505
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27.5, -29.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.58623e-05 Jy
! Component: 100  -  total flux cleaned = -0.000275497 Jy
! Component: 150  -  total flux cleaned = -0.000451071 Jy
! Component: 200  -  total flux cleaned = -0.000558687 Jy
! Total flux subtracted in 200 components = -0.000558687 Jy
! Clean residual min=-0.001707 max=0.001690 Jy/beam
! Clean residual mean=0.000000 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.190163 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 128 components and 0.190163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098145Jy  sigma=0.451722
! Fit after  self-cal, rms=0.098140Jy  sigma=0.451660
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098140Jy  sigma=0.451660
! Fit after  self-cal, rms=0.095194Jy  sigma=0.450044
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.134 mas, bmaj=7.972 mas, bpa=-8.392 degrees
! Estimated noise=0.655611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112304 Jy
! Component: 100  -  total flux cleaned = -0.000203331 Jy
! Component: 150  -  total flux cleaned = -0.000364773 Jy
! Component: 200  -  total flux cleaned = -0.000401805 Jy
! Total flux subtracted in 200 components = -0.000401805 Jy
! Clean residual min=-0.001451 max=0.001443 Jy/beam
! Clean residual mean=0.000001 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.189762 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 152 components and 0.189762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095150Jy  sigma=0.449611
! Fit after  self-cal, rms=0.095146Jy  sigma=0.449575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (36.5, -22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000527058 Jy
! Component: 100  -  total flux cleaned = 0.000409884 Jy
! Component: 150  -  total flux cleaned = 0.000302444 Jy
! Component: 200  -  total flux cleaned = 0.000169217 Jy
! Total flux subtracted in 200 components = 0.000169217 Jy
! Clean residual min=-0.001353 max=0.001277 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.189931 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 167 components and 0.189931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095103Jy  sigma=0.449214
! Fit after  self-cal, rms=0.095102Jy  sigma=0.449193
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095102Jy  sigma=0.449193
! Fit after  self-cal, rms=0.095378Jy  sigma=0.449164
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.337 mas, bmaj=11.32 mas, bpa=-10.56 degrees
! Estimated noise=0.786162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169435 Jy
! Component: 100  -  total flux cleaned = 0.000141476 Jy
! Component: 150  -  total flux cleaned = 0.000116472 Jy
! Component: 200  -  total flux cleaned = 7.21566e-05 Jy
! Total flux subtracted in 200 components = 7.21566e-05 Jy
! Clean residual min=-0.001380 max=0.001187 Jy/beam
! Clean residual mean=0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.190003 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 180 components and 0.190003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095367Jy  sigma=0.449079
! Fit after  self-cal, rms=0.095372Jy  sigma=0.449066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.72739e-05 Jy
! Component: 100  -  total flux cleaned = 7.09454e-06 Jy
! Component: 150  -  total flux cleaned = -3.06908e-05 Jy
! Component: 200  -  total flux cleaned = -6.56816e-05 Jy
! Total flux subtracted in 200 components = -6.56816e-05 Jy
! Clean residual min=-0.001346 max=0.001143 Jy/beam
! Clean residual mean=0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.189937 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 191 components and 0.189937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095367Jy  sigma=0.449032
! Fit after  self-cal, rms=0.095372Jy  sigma=0.449025
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.131 mas, bmaj=7.968 mas, bpa=-8.375 degrees
! Estimated noise=0.654574 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.131 x 7.968 at -8.375 degrees (North through East)
! Clean map  min=-0.0015776  max=0.11939 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.502 mas, bmaj=7.298 mas, bpa=-8.533 degrees
! Estimated noise=1.18196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0937576 Jy
! Component: 100  -  total flux cleaned = 0.126456 Jy
! Component: 150  -  total flux cleaned = 0.143893 Jy
! Component: 200  -  total flux cleaned = 0.154685 Jy
! Total flux subtracted in 200 components = 0.154685 Jy
! Clean residual min=-0.003587 max=0.005974 Jy/beam
! Clean residual mean=-0.000013 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.154685 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.154685 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.131 mas, bmaj=7.968 mas, bpa=-8.375 degrees
! Estimated noise=0.654574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106672 Jy
! Component: 100  -  total flux cleaned = 0.0173922 Jy
! Component: 150  -  total flux cleaned = 0.021907 Jy
! Component: 200  -  total flux cleaned = 0.0251488 Jy
! Total flux subtracted in 200 components = 0.0251488 Jy
! Clean residual min=-0.001644 max=0.002084 Jy/beam
! Clean residual mean=-0.000008 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.179834 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 71 components and 0.179834 Jy
! Inverting map 
! Added new window around map position (-3, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025632 Jy
! Component: 100  -  total flux cleaned = 0.00461112 Jy
! Component: 150  -  total flux cleaned = 0.00628107 Jy
! Component: 200  -  total flux cleaned = 0.0076536 Jy
! Total flux subtracted in 200 components = 0.0076536 Jy
! Clean residual min=-0.001489 max=0.001323 Jy/beam
! Clean residual mean=-0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.187488 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 100 components and 0.187488 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.337 mas, bmaj=11.32 mas, bpa=-10.56 degrees
! Estimated noise=0.786162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143061 Jy
! Component: 100  -  total flux cleaned = 0.0018573 Jy
! Component: 150  -  total flux cleaned = 0.00213165 Jy
! Component: 200  -  total flux cleaned = 0.00226879 Jy
! Total flux subtracted in 200 components = 0.00226879 Jy
! Clean residual min=-0.001379 max=0.001151 Jy/beam
! Clean residual mean=-0.000000 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.189757 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.84058e-05 Jy
! Component: 100  -  total flux cleaned = 5.77774e-05 Jy
! Component: 150  -  total flux cleaned = 3.43005e-05 Jy
! Component: 200  -  total flux cleaned = -9.17404e-06 Jy
! Total flux subtracted in 200 components = -9.17404e-06 Jy
! Clean residual min=-0.001312 max=0.001127 Jy/beam
! Clean residual mean=0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.189747 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 185 components and 0.189748 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.131 mas, bmaj=7.968 mas, bpa=-8.375 degrees
! Estimated noise=0.654574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.44529e-05 Jy
! Component: 100  -  total flux cleaned = -0.000255285 Jy
! Component: 150  -  total flux cleaned = -0.000286542 Jy
! Component: 200  -  total flux cleaned = -0.000346689 Jy
! Total flux subtracted in 200 components = -0.000346689 Jy
! Clean residual min=-0.001201 max=0.001235 Jy/beam
! Clean residual mean=0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.189401 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 210 components and 0.189401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095359Jy  sigma=0.448720
! Fit after  self-cal, rms=0.095342Jy  sigma=0.448585
wmodel J0158+1655_S_map.mod
! Writing 210 model components to file: J0158+1655_S_map.mod
wobs   J0158+1655_S_uvs.fits
! Writing UV FITS file: J0158+1655_S_uvs.fits
wwins  J0158+1655_S_map.win
! wwins: Wrote 6 windows to J0158+1655_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.96315e-05 Jy
! Component: 100  -  total flux cleaned = -6.11821e-05 Jy
! Component: 150  -  total flux cleaned = -4.29685e-05 Jy
! Component: 200  -  total flux cleaned = 2.8651e-05 Jy
! Component: 250  -  total flux cleaned = 8.05244e-05 Jy
! Component: 300  -  total flux cleaned = 0.000181678 Jy
! Component: 350  -  total flux cleaned = 0.000247658 Jy
! Component: 400  -  total flux cleaned = 0.000296295 Jy
! Component: 450  -  total flux cleaned = 0.000343861 Jy
! Component: 500  -  total flux cleaned = 0.00039056 Jy
! Component: 550  -  total flux cleaned = 0.000421213 Jy
! Component: 600  -  total flux cleaned = 0.000481262 Jy
! Component: 650  -  total flux cleaned = 0.000481134 Jy
! Component: 700  -  total flux cleaned = 0.000524575 Jy
! Component: 750  -  total flux cleaned = 0.000481595 Jy
! Component: 800  -  total flux cleaned = 0.00052425 Jy
! Component: 850  -  total flux cleaned = 0.000552142 Jy
! Component: 900  -  total flux cleaned = 0.00055235 Jy
! Component: 950  -  total flux cleaned = 0.000606863 Jy
! Component: 1000  -  total flux cleaned = 0.000606719 Jy
! Component: 1050  -  total flux cleaned = 0.000619956 Jy
! Component: 1100  -  total flux cleaned = 0.000672569 Jy
! Component: 1150  -  total flux cleaned = 0.000672472 Jy
! Component: 1200  -  total flux cleaned = 0.000608329 Jy
! Component: 1250  -  total flux cleaned = 0.000685086 Jy
! Component: 1300  -  total flux cleaned = 0.000697779 Jy
! Component: 1350  -  total flux cleaned = 0.000697736 Jy
! Component: 1400  -  total flux cleaned = 0.000710146 Jy
! Component: 1450  -  total flux cleaned = 0.000722486 Jy
! Component: 1500  -  total flux cleaned = 0.000722327 Jy
! Component: 1550  -  total flux cleaned = 0.000746102 Jy
! Component: 1600  -  total flux cleaned = 0.000698564 Jy
! Component: 1650  -  total flux cleaned = 0.000674958 Jy
! Component: 1700  -  total flux cleaned = 0.000686537 Jy
! Component: 1750  -  total flux cleaned = 0.000686355 Jy
! Component: 1800  -  total flux cleaned = 0.000663224 Jy
! Component: 1850  -  total flux cleaned = 0.000651913 Jy
! Component: 1900  -  total flux cleaned = 0.000629349 Jy
! Component: 1950  -  total flux cleaned = 0.00068544 Jy
! Component: 2000  -  total flux cleaned = 0.000652074 Jy
! Component: 2050  -  total flux cleaned = 0.000641043 Jy
! Component: 2100  -  total flux cleaned = 0.00056453 Jy
! Component: 2150  -  total flux cleaned = 0.000597322 Jy
! Component: 2200  -  total flux cleaned = 0.00058654 Jy
! Component: 2250  -  total flux cleaned = 0.000554353 Jy
! Component: 2300  -  total flux cleaned = 0.000565078 Jy
! Component: 2350  -  total flux cleaned = 0.000533525 Jy
! Component: 2400  -  total flux cleaned = 0.000575356 Jy
! Component: 2450  -  total flux cleaned = 0.000512773 Jy
! Component: 2500  -  total flux cleaned = 0.000481747 Jy
! Component: 2550  -  total flux cleaned = 0.000512522 Jy
! Component: 2600  -  total flux cleaned = 0.00047172 Jy
! Component: 2650  -  total flux cleaned = 0.000451462 Jy
! Component: 2700  -  total flux cleaned = 0.000441442 Jy
! Component: 2750  -  total flux cleaned = 0.0004515 Jy
! Component: 2800  -  total flux cleaned = 0.000421623 Jy
! Component: 2850  -  total flux cleaned = 0.00041189 Jy
! Component: 2900  -  total flux cleaned = 0.000412041 Jy
! Component: 2950  -  total flux cleaned = 0.000421758 Jy
! Component: 3000  -  total flux cleaned = 0.000392698 Jy
! Component: 3050  -  total flux cleaned = 0.000411908 Jy
! Component: 3100  -  total flux cleaned = 0.000383228 Jy
! Component: 3150  -  total flux cleaned = 0.000383222 Jy
! Component: 3200  -  total flux cleaned = 0.000364209 Jy
! Component: 3250  -  total flux cleaned = 0.000326631 Jy
! Component: 3300  -  total flux cleaned = 0.000336018 Jy
! Component: 3350  -  total flux cleaned = 0.000336036 Jy
! Component: 3400  -  total flux cleaned = 0.000326932 Jy
! Component: 3450  -  total flux cleaned = 0.000336056 Jy
! Component: 3500  -  total flux cleaned = 0.000290498 Jy
! Component: 3550  -  total flux cleaned = 0.00031777 Jy
! Component: 3600  -  total flux cleaned = 0.000317797 Jy
! Component: 3650  -  total flux cleaned = 0.000362588 Jy
! Component: 3700  -  total flux cleaned = 0.000335847 Jy
! Component: 3750  -  total flux cleaned = 0.00031809 Jy
! Component: 3800  -  total flux cleaned = 0.000318129 Jy
! Component: 3850  -  total flux cleaned = 0.000300727 Jy
! Component: 3900  -  total flux cleaned = 0.000344479 Jy
! Component: 3950  -  total flux cleaned = 0.000370608 Jy
! Component: 4000  -  total flux cleaned = 0.000353268 Jy
! Component: 4050  -  total flux cleaned = 0.000370528 Jy
! Total flux subtracted in 4096 components = 0.00032774 Jy
! Clean residual min=-0.000503 max=0.000569 Jy/beam
! Clean residual mean=0.000001 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.189729 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 479 components and 0.189729 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0158+1655_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.131 x 7.968 at -8.375 degrees (North through East)
! Clean map  min=-0.0010339  max=0.12049 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0158+1655_S_map.fits
wmodel /image_prod/ug002_uva//J0158+1655_S_map.mod
! Writing 479 model components to file: /image_prod/ug002_uva//J0158+1655_S_map.mod
wobs   /image_prod/ug002_uva//J0158+1655_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0158+1655_S_uvs.fits
wwins  /image_prod/ug002_uva//J0158+1655_S_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0158+1655_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.120489 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000156282 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.389118 0.389118 0.778237 1.55647 3.11295 6.2259 12.4518 24.9036 49.8072 99.6143
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.12 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  770.973 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0158+1655_S_dfm.log closed on Wed Mar  4 19:19:44 2020