! Started logfile: /image_prod/ug002_uva//J0155-1443_S_b_dfm.log on Wed Mar 4 19:18:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0155-1443_S_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0155-1443_S_b_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.888889 visibilities/baseline/integration-bin. ! Found source: J0155-1443 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4800 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0155-1443_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022298Jy sigma=7.722307 ! Fit after self-cal, rms=0.876343Jy sigma=6.681030 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=6.716 mas, bpa=-0.3994 degrees ! Estimated noise=2.20522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0973295 Jy ! Component: 100 - total flux cleaned = 0.11858 Jy ! Total flux subtracted in 100 components = 0.11858 Jy ! Clean residual min=-0.005305 max=0.007035 Jy/beam ! Clean residual mean=0.000007 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.11858 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.11858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.118804Jy sigma=0.541768 ! Fit after self-cal, rms=0.118791Jy sigma=0.541740 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=8.121 mas, bpa=-2.088 degrees ! Estimated noise=1.433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628307 Jy ! Component: 100 - total flux cleaned = 0.00701865 Jy ! Component: 150 - total flux cleaned = 0.00700344 Jy ! Component: 200 - total flux cleaned = 0.006993 Jy ! Total flux subtracted in 200 components = 0.006993 Jy ! Clean residual min=-0.005551 max=0.005009 Jy/beam ! Clean residual mean=0.000008 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.125573 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.125573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.118015Jy sigma=0.539755 ! Fit after self-cal, rms=0.118004Jy sigma=0.539740 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.155 x 8.121 at -2.088 degrees (North through East) ! Clean map min=-0.0054479 max=0.12638 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.57 FD 1.02 KP 0.98 LA 1.10 ! MK 0.96 NL 1.12 OV 1.01 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.95 KP 1.00 LA 1.05 ! MK 0.98 NL 0.93 OV 1.05 PT 1.04 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 0.95 KP 1.01 LA 1.02 ! MK 1.00 NL 1.14 OV 1.02 PT 1.02 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.118004Jy sigma=0.539740 ! Fit after self-cal, rms=0.088395Jy sigma=0.526547 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=8.031 mas, bpa=-2.258 degrees ! Estimated noise=1.41673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304446 Jy ! Component: 100 - total flux cleaned = 0.000396797 Jy ! Component: 150 - total flux cleaned = 0.000450536 Jy ! Component: 200 - total flux cleaned = 0.000450558 Jy ! Total flux subtracted in 200 components = 0.000450558 Jy ! Clean residual min=-0.002697 max=0.003093 Jy/beam ! Clean residual mean=-0.000001 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.126023 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.126023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088375Jy sigma=0.526492 ! Fit after self-cal, rms=0.088194Jy sigma=0.526009 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088194Jy sigma=0.526009 ! Fit after self-cal, rms=0.087775Jy sigma=0.524862 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=8.032 mas, bpa=-2.29 degrees ! Estimated noise=1.41968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493671 Jy ! Component: 100 - total flux cleaned = 0.000516883 Jy ! Component: 150 - total flux cleaned = 0.000527022 Jy ! Component: 200 - total flux cleaned = 0.0005274 Jy ! Total flux subtracted in 200 components = 0.0005274 Jy ! Clean residual min=-0.002447 max=0.002917 Jy/beam ! Clean residual mean=-0.000004 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.126551 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.126551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087767Jy sigma=0.524847 ! Fit after self-cal, rms=0.087776Jy sigma=0.524821 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248266 Jy ! Component: 100 - total flux cleaned = 0.00244039 Jy ! Component: 150 - total flux cleaned = 0.00231098 Jy ! Component: 200 - total flux cleaned = 0.00215886 Jy ! Total flux subtracted in 200 components = 0.00215886 Jy ! Clean residual min=-0.002332 max=0.002332 Jy/beam ! Clean residual mean=-0.000002 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.12871 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.12871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087703Jy sigma=0.524069 ! Fit after self-cal, rms=0.087705Jy sigma=0.524034 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087705Jy sigma=0.524034 ! Fit after self-cal, rms=0.087676Jy sigma=0.523995 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.026 mas, bpa=-2.231 degrees ! Estimated noise=1.42057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413752 Jy ! Component: 100 - total flux cleaned = 0.000277595 Jy ! Component: 150 - total flux cleaned = 0.000215144 Jy ! Component: 200 - total flux cleaned = 0.00018568 Jy ! Total flux subtracted in 200 components = 0.00018568 Jy ! Clean residual min=-0.002284 max=0.002250 Jy/beam ! Clean residual mean=-0.000002 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.128895 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.128895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087651Jy sigma=0.523794 ! Fit after self-cal, rms=0.087651Jy sigma=0.523789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.47257e-05 Jy ! Component: 100 - total flux cleaned = -0.00010641 Jy ! Component: 150 - total flux cleaned = -0.000155143 Jy ! Component: 200 - total flux cleaned = -0.000199515 Jy ! Total flux subtracted in 200 components = -0.000199515 Jy ! Clean residual min=-0.002268 max=0.002227 Jy/beam ! Clean residual mean=-0.000002 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.128696 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.128696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087637Jy sigma=0.523696 ! Fit after self-cal, rms=0.087638Jy sigma=0.523695 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087638Jy sigma=0.523695 ! Fit after self-cal, rms=0.087547Jy sigma=0.523675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.96 mas, bmaj=17.34 mas, bpa=0.8448 degrees ! Estimated noise=1.80191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000510033 Jy ! Component: 100 - total flux cleaned = -0.00053059 Jy ! Component: 150 - total flux cleaned = -0.000598777 Jy ! Component: 200 - total flux cleaned = -0.00065586 Jy ! Total flux subtracted in 200 components = -0.00065586 Jy ! Clean residual min=-0.002574 max=0.002622 Jy/beam ! Clean residual mean=-0.000005 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.12804 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 0.12804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087540Jy sigma=0.523663 ! Fit after self-cal, rms=0.087540Jy sigma=0.523654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19022e-06 Jy ! Component: 100 - total flux cleaned = -3.25892e-05 Jy ! Component: 150 - total flux cleaned = -9.43109e-05 Jy ! Component: 200 - total flux cleaned = -0.000150904 Jy ! Total flux subtracted in 200 components = -0.000150904 Jy ! Clean residual min=-0.002556 max=0.002607 Jy/beam ! Clean residual mean=-0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.127889 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.127889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087539Jy sigma=0.523653 ! Fit after self-cal, rms=0.087541Jy sigma=0.523651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=8.026 mas, bpa=-2.215 degrees ! Estimated noise=1.42117 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 8.026 at -2.215 degrees (North through East) ! Clean map min=-0.0021249 max=0.12544 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.432 mas, bmaj=6.678 mas, bpa=-0.5764 degrees ! Estimated noise=2.16992 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0957692 Jy ! Component: 100 - total flux cleaned = 0.116678 Jy ! Component: 150 - total flux cleaned = 0.122649 Jy ! Component: 200 - total flux cleaned = 0.126148 Jy ! Total flux subtracted in 200 components = 0.126148 Jy ! Clean residual min=-0.003183 max=0.003091 Jy/beam ! Clean residual mean=-0.000002 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.126148 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.126148 Jy ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=8.026 mas, bpa=-2.215 degrees ! Estimated noise=1.42117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253043 Jy ! Component: 100 - total flux cleaned = 0.00308315 Jy ! Component: 150 - total flux cleaned = 0.00314426 Jy ! Component: 200 - total flux cleaned = 0.00319679 Jy ! Total flux subtracted in 200 components = 0.00319679 Jy ! Clean residual min=-0.002314 max=0.002291 Jy/beam ! Clean residual mean=-0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.129345 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.129345 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.96 mas, bmaj=17.34 mas, bpa=0.8448 degrees ! Estimated noise=1.80191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587778 Jy ! Component: 100 - total flux cleaned = -0.000629467 Jy ! Component: 150 - total flux cleaned = -0.000702153 Jy ! Component: 200 - total flux cleaned = -0.000762156 Jy ! Total flux subtracted in 200 components = -0.000762156 Jy ! Clean residual min=-0.002602 max=0.002677 Jy/beam ! Clean residual mean=-0.000004 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.128583 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.74312e-05 Jy ! Component: 100 - total flux cleaned = -0.000183993 Jy ! Component: 150 - total flux cleaned = -0.000223834 Jy ! Component: 200 - total flux cleaned = -0.000280466 Jy ! Total flux subtracted in 200 components = -0.000280466 Jy ! Clean residual min=-0.002574 max=0.002631 Jy/beam ! Clean residual mean=-0.000004 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.128303 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.128303 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=8.026 mas, bpa=-2.215 degrees ! Estimated noise=1.42117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.30311e-06 Jy ! Component: 100 - total flux cleaned = -8.79282e-05 Jy ! Component: 150 - total flux cleaned = -0.000125438 Jy ! Component: 200 - total flux cleaned = -0.000125103 Jy ! Total flux subtracted in 200 components = -0.000125103 Jy ! Clean residual min=-0.002189 max=0.002272 Jy/beam ! Clean residual mean=-0.000002 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.128178 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.128177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087558Jy sigma=0.523816 ! Fit after self-cal, rms=0.087561Jy sigma=0.523786 wmodel J0155-1443_S_b_map.mod ! Writing 61 model components to file: J0155-1443_S_b_map.mod wobs J0155-1443_S_b_uvs.fits ! Writing UV FITS file: J0155-1443_S_b_uvs.fits wwins J0155-1443_S_b_map.win ! wwins: Wrote 2 windows to J0155-1443_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133555 Jy ! Component: 100 - total flux cleaned = 1.8571e-05 Jy ! Component: 150 - total flux cleaned = 5.40613e-05 Jy ! Component: 200 - total flux cleaned = 0.000123341 Jy ! Component: 250 - total flux cleaned = 0.000156848 Jy ! Component: 300 - total flux cleaned = 0.000156797 Jy ! Component: 350 - total flux cleaned = 0.000124812 Jy ! Component: 400 - total flux cleaned = 9.39303e-05 Jy ! Component: 450 - total flux cleaned = 6.35363e-05 Jy ! Component: 500 - total flux cleaned = 3.34034e-05 Jy ! Component: 550 - total flux cleaned = -2.42969e-05 Jy ! Component: 600 - total flux cleaned = -0.00010843 Jy ! Component: 650 - total flux cleaned = -0.000135875 Jy ! Component: 700 - total flux cleaned = -0.000216574 Jy ! Component: 750 - total flux cleaned = -0.000216894 Jy ! Component: 800 - total flux cleaned = -0.000243052 Jy ! Component: 850 - total flux cleaned = -0.00026815 Jy ! Component: 900 - total flux cleaned = -0.000317706 Jy ! Component: 950 - total flux cleaned = -0.000317466 Jy ! Component: 1000 - total flux cleaned = -0.000317529 Jy ! Component: 1050 - total flux cleaned = -0.000294428 Jy ! Component: 1100 - total flux cleaned = -0.000225562 Jy ! Component: 1150 - total flux cleaned = -0.000248798 Jy ! Component: 1200 - total flux cleaned = -0.000204241 Jy ! Component: 1250 - total flux cleaned = -0.000116678 Jy ! Component: 1300 - total flux cleaned = -0.000138587 Jy ! Component: 1350 - total flux cleaned = -3.16652e-05 Jy ! Component: 1400 - total flux cleaned = 1.02207e-05 Jy ! Component: 1450 - total flux cleaned = 0.00011328 Jy ! Component: 1500 - total flux cleaned = 0.00013337 Jy ! Component: 1550 - total flux cleaned = 0.000133391 Jy ! Component: 1600 - total flux cleaned = 0.000192322 Jy ! Component: 1650 - total flux cleaned = 0.000173123 Jy ! Component: 1700 - total flux cleaned = 0.000250167 Jy ! Component: 1750 - total flux cleaned = 0.000174529 Jy ! Component: 1800 - total flux cleaned = 0.000212041 Jy ! Component: 1850 - total flux cleaned = 0.000230531 Jy ! Component: 1900 - total flux cleaned = 0.000230452 Jy ! Component: 1950 - total flux cleaned = 0.000230263 Jy ! Component: 2000 - total flux cleaned = 0.000230175 Jy ! Component: 2050 - total flux cleaned = 0.000195056 Jy ! Component: 2100 - total flux cleaned = 0.000281611 Jy ! Component: 2150 - total flux cleaned = 0.000332856 Jy ! Component: 2200 - total flux cleaned = 0.000315527 Jy ! Component: 2250 - total flux cleaned = 0.0003489 Jy ! Component: 2300 - total flux cleaned = 0.000348773 Jy ! Component: 2350 - total flux cleaned = 0.000349074 Jy ! Component: 2400 - total flux cleaned = 0.000381534 Jy ! Component: 2450 - total flux cleaned = 0.000381633 Jy ! Component: 2500 - total flux cleaned = 0.00036591 Jy ! Component: 2550 - total flux cleaned = 0.000412846 Jy ! Component: 2600 - total flux cleaned = 0.000397315 Jy ! Component: 2650 - total flux cleaned = 0.000412739 Jy ! Component: 2700 - total flux cleaned = 0.00042778 Jy ! Component: 2750 - total flux cleaned = 0.000412791 Jy ! Component: 2800 - total flux cleaned = 0.000412831 Jy ! Component: 2850 - total flux cleaned = 0.000383592 Jy ! Component: 2900 - total flux cleaned = 0.000369243 Jy ! Component: 2950 - total flux cleaned = 0.000412707 Jy ! Component: 3000 - total flux cleaned = 0.000384012 Jy ! Component: 3050 - total flux cleaned = 0.000426575 Jy ! Component: 3100 - total flux cleaned = 0.000412315 Jy ! Component: 3150 - total flux cleaned = 0.00038456 Jy ! Component: 3200 - total flux cleaned = 0.000384449 Jy ! Component: 3250 - total flux cleaned = 0.000370702 Jy ! Component: 3300 - total flux cleaned = 0.000343427 Jy ! Component: 3350 - total flux cleaned = 0.000356901 Jy ! Component: 3400 - total flux cleaned = 0.000330129 Jy ! Component: 3450 - total flux cleaned = 0.000290315 Jy ! Component: 3500 - total flux cleaned = 0.000303298 Jy ! Component: 3550 - total flux cleaned = 0.000264125 Jy ! Component: 3600 - total flux cleaned = 0.000251004 Jy ! Component: 3650 - total flux cleaned = 0.000250973 Jy ! Component: 3700 - total flux cleaned = 0.000187512 Jy ! Component: 3750 - total flux cleaned = 0.000187663 Jy ! Component: 3800 - total flux cleaned = 0.000237709 Jy ! Component: 3850 - total flux cleaned = 0.000188083 Jy ! Component: 3900 - total flux cleaned = 0.000200428 Jy ! Component: 3950 - total flux cleaned = 0.000163806 Jy ! Component: 4000 - total flux cleaned = 0.000163859 Jy ! Component: 4050 - total flux cleaned = 0.000139844 Jy ! Total flux subtracted in 4096 components = 0.000139795 Jy ! Clean residual min=-0.000698 max=0.000657 Jy/beam ! Clean residual mean=-0.000003 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.128317 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 314 components and 0.128317 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0155-1443_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 8.026 at -2.215 degrees (North through East) ! Clean map min=-0.0021308 max=0.12378 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0155-1443_S_b_map.fits wmodel /image_prod/ug002_uva//J0155-1443_S_b_map.mod ! Writing 314 model components to file: /image_prod/ug002_uva//J0155-1443_S_b_map.mod wobs /image_prod/ug002_uva//J0155-1443_S_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0155-1443_S_b_uvs.fits wwins /image_prod/ug002_uva//J0155-1443_S_b_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0155-1443_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.123784 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202116 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.489842 0.489842 0.979685 1.95937 3.91874 7.83748 15.675 31.3499 62.6998 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.123 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 612.441 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0155-1443_S_b_dfm.log closed on Wed Mar 4 19:18:39 2020