! Started logfile: /image_prod/ug002_uva//J0154+1113_S_dfm.log on Wed Mar  4 19:17:55 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0154+1113_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0154+1113_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.881481 visibilities/baseline/integration-bin.
! Found source: J0154+1113
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7140 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0154+1113_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007176Jy  sigma=8.942698
! Fit after  self-cal, rms=0.945234Jy  sigma=8.396493
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.071 mas, bmaj=9.067 mas, bpa=13.1 degrees
! Estimated noise=1.50916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0436734 Jy
! Component: 100  -  total flux cleaned = 0.0533977 Jy
! Total flux subtracted in 100 components = 0.0533977 Jy
! Clean residual min=-0.003978 max=0.004855 Jy/beam
! Clean residual mean=-0.000001 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.0533977 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0533977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074103Jy  sigma=0.473876
! Fit after  self-cal, rms=0.073300Jy  sigma=0.465149
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.704 mas, bmaj=9.933 mas, bpa=10.46 degrees
! Estimated noise=0.979463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00446819 Jy
! Component: 100  -  total flux cleaned = 0.00534893 Jy
! Component: 150  -  total flux cleaned = 0.00547076 Jy
! Component: 200  -  total flux cleaned = 0.00552354 Jy
! Total flux subtracted in 200 components = 0.00552354 Jy
! Clean residual min=-0.002791 max=0.002914 Jy/beam
! Clean residual mean=0.000001 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.0589212 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.0589212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072931Jy  sigma=0.462265
! Fit after  self-cal, rms=0.072904Jy  sigma=0.462216
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.704 x 9.933 at 10.46 degrees (North through East)
! Clean map  min=-0.0027651  max=0.055745 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.00     KP        0.99     
!   LA        1.01     NL        0.94     OV        0.98     PT        1.04     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.64     FD        0.99     HN        1.04     KP        1.04     
!   LA        0.95     NL        0.88     OV        0.98     PT        1.06     
!   SC        0.76     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.07     HN        1.01     KP        1.04     
!   LA        0.97     NL        0.92     OV        0.97     PT        1.04     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.072904Jy  sigma=0.462216
! Fit after  self-cal, rms=0.070001Jy  sigma=0.459031
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.629 mas, bmaj=9.881 mas, bpa=11.02 degrees
! Estimated noise=0.976446 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000573491 Jy
! Component: 100  -  total flux cleaned = -0.00060561 Jy
! Component: 150  -  total flux cleaned = -0.00063137 Jy
! Component: 200  -  total flux cleaned = -0.000653352 Jy
! Total flux subtracted in 200 components = -0.000653352 Jy
! Clean residual min=-0.002143 max=0.001808 Jy/beam
! Clean residual mean=0.000002 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.0582679 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.0582679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069974Jy  sigma=0.458774
! Fit after  self-cal, rms=0.070024Jy  sigma=0.458585
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070024Jy  sigma=0.458585
! Fit after  self-cal, rms=0.064021Jy  sigma=0.457356
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.628 mas, bmaj=9.906 mas, bpa=10.94 degrees
! Estimated noise=0.968694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159753 Jy
! Component: 100  -  total flux cleaned = 0.000159483 Jy
! Component: 150  -  total flux cleaned = 0.000169309 Jy
! Component: 200  -  total flux cleaned = 0.00017838 Jy
! Total flux subtracted in 200 components = 0.00017838 Jy
! Clean residual min=-0.001589 max=0.001827 Jy/beam
! Clean residual mean=0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0584462 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.0584462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064016Jy  sigma=0.457327
! Fit after  self-cal, rms=0.063954Jy  sigma=0.457235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (94, -86.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166182 Jy
! Component: 100  -  total flux cleaned = 0.0021516 Jy
! Component: 150  -  total flux cleaned = 0.00225122 Jy
! Component: 200  -  total flux cleaned = 0.00240726 Jy
! Total flux subtracted in 200 components = 0.00240726 Jy
! Clean residual min=-0.001434 max=0.001399 Jy/beam
! Clean residual mean=0.000001 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.0608535 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 70 components and 0.0608535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063908Jy  sigma=0.456740
! Fit after  self-cal, rms=0.063894Jy  sigma=0.456665
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063894Jy  sigma=0.456665
! Fit after  self-cal, rms=0.063356Jy  sigma=0.456626
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.624 mas, bmaj=9.91 mas, bpa=11 degrees
! Estimated noise=0.967048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000686949 Jy
! Component: 100  -  total flux cleaned = 0.000860839 Jy
! Component: 150  -  total flux cleaned = 0.000979784 Jy
! Component: 200  -  total flux cleaned = 0.00105733 Jy
! Total flux subtracted in 200 components = 0.00105733 Jy
! Clean residual min=-0.001309 max=0.001340 Jy/beam
! Clean residual mean=0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0619108 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.0619108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063340Jy  sigma=0.456513
! Fit after  self-cal, rms=0.063328Jy  sigma=0.456497
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000307258 Jy
! Component: 100  -  total flux cleaned = 0.000350876 Jy
! Component: 150  -  total flux cleaned = 0.000404433 Jy
! Component: 200  -  total flux cleaned = 0.000441772 Jy
! Total flux subtracted in 200 components = 0.000441772 Jy
! Clean residual min=-0.001259 max=0.001325 Jy/beam
! Clean residual mean=0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.0623526 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 87 components and 0.0623526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063319Jy  sigma=0.456454
! Fit after  self-cal, rms=0.063317Jy  sigma=0.456451
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063317Jy  sigma=0.456451
! Fit after  self-cal, rms=0.063099Jy  sigma=0.456438
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.219 mas, bmaj=12.83 mas, bpa=-4.793 degrees
! Estimated noise=1.04834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289029 Jy
! Component: 100  -  total flux cleaned = 0.000381821 Jy
! Component: 150  -  total flux cleaned = 0.000397366 Jy
! Component: 200  -  total flux cleaned = 0.000411441 Jy
! Total flux subtracted in 200 components = 0.000411441 Jy
! Clean residual min=-0.001221 max=0.001368 Jy/beam
! Clean residual mean=0.000004 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.062764 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 0.062764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063095Jy  sigma=0.456421
! Fit after  self-cal, rms=0.063091Jy  sigma=0.456418
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119283 Jy
! Component: 100  -  total flux cleaned = 0.000139332 Jy
! Component: 150  -  total flux cleaned = 0.000151679 Jy
! Component: 200  -  total flux cleaned = 0.000163382 Jy
! Total flux subtracted in 200 components = 0.000163382 Jy
! Clean residual min=-0.001199 max=0.001357 Jy/beam
! Clean residual mean=0.000004 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0629274 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 102 components and 0.0629274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063089Jy  sigma=0.456412
! Fit after  self-cal, rms=0.063088Jy  sigma=0.456411
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.621 mas, bmaj=9.911 mas, bpa=11.07 degrees
! Estimated noise=0.967191 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.621 x 9.911 at 11.07 degrees (North through East)
! Clean map  min=-0.0012185  max=0.055646 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=9.083 mas, bpa=13.65 degrees
! Estimated noise=1.4839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0444991 Jy
! Component: 100  -  total flux cleaned = 0.0542539 Jy
! Component: 150  -  total flux cleaned = 0.0573168 Jy
! Component: 200  -  total flux cleaned = 0.0585216 Jy
! Total flux subtracted in 200 components = 0.0585216 Jy
! Clean residual min=-0.002973 max=0.002660 Jy/beam
! Clean residual mean=0.000001 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.0585216 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0585216 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.621 mas, bmaj=9.911 mas, bpa=11.07 degrees
! Estimated noise=0.967191 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172977 Jy
! Component: 100  -  total flux cleaned = 0.00245438 Jy
! Component: 150  -  total flux cleaned = 0.00294608 Jy
! Component: 200  -  total flux cleaned = 0.00313534 Jy
! Total flux subtracted in 200 components = 0.00313534 Jy
! Clean residual min=-0.001526 max=0.001328 Jy/beam
! Clean residual mean=0.000002 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.0616569 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.0616569 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.219 mas, bmaj=12.83 mas, bpa=-4.793 degrees
! Estimated noise=1.04834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394771 Jy
! Component: 100  -  total flux cleaned = 0.000575909 Jy
! Component: 150  -  total flux cleaned = 0.000719465 Jy
! Component: 200  -  total flux cleaned = 0.000794373 Jy
! Total flux subtracted in 200 components = 0.000794373 Jy
! Clean residual min=-0.001246 max=0.001408 Jy/beam
! Clean residual mean=0.000004 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0624513 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.04387e-07 Jy
! Component: 100  -  total flux cleaned = 3.07111e-05 Jy
! Component: 150  -  total flux cleaned = 4.02082e-05 Jy
! Component: 200  -  total flux cleaned = 4.91117e-05 Jy
! Total flux subtracted in 200 components = 4.91117e-05 Jy
! Clean residual min=-0.001221 max=0.001389 Jy/beam
! Clean residual mean=0.000004 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.0625004 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 75 components and 0.0625004 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.621 mas, bmaj=9.911 mas, bpa=11.07 degrees
! Estimated noise=0.967191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.50972e-05 Jy
! Component: 100  -  total flux cleaned = 6.70897e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102485 Jy
! Component: 200  -  total flux cleaned = 0.000102609 Jy
! Total flux subtracted in 200 components = 0.000102609 Jy
! Clean residual min=-0.001289 max=0.001287 Jy/beam
! Clean residual mean=0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.062603 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.062603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063094Jy  sigma=0.456553
! Fit after  self-cal, rms=0.063094Jy  sigma=0.456532
wmodel J0154+1113_S_map.mod
! Writing 85 model components to file: J0154+1113_S_map.mod
wobs   J0154+1113_S_uvs.fits
! Writing UV FITS file: J0154+1113_S_uvs.fits
wwins  J0154+1113_S_map.win
! wwins: Wrote 2 windows to J0154+1113_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119903 Jy
! Component: 100  -  total flux cleaned = 0.000209404 Jy
! Component: 150  -  total flux cleaned = 0.00033784 Jy
! Component: 200  -  total flux cleaned = 0.000501909 Jy
! Component: 250  -  total flux cleaned = 0.000620653 Jy
! Component: 300  -  total flux cleaned = 0.000734841 Jy
! Component: 350  -  total flux cleaned = 0.000752958 Jy
! Component: 400  -  total flux cleaned = 0.000842787 Jy
! Component: 450  -  total flux cleaned = 0.000895359 Jy
! Component: 500  -  total flux cleaned = 0.00096342 Jy
! Component: 550  -  total flux cleaned = 0.00101308 Jy
! Component: 600  -  total flux cleaned = 0.00107733 Jy
! Component: 650  -  total flux cleaned = 0.001124 Jy
! Component: 700  -  total flux cleaned = 0.00110876 Jy
! Component: 750  -  total flux cleaned = 0.00113876 Jy
! Component: 800  -  total flux cleaned = 0.00116791 Jy
! Component: 850  -  total flux cleaned = 0.00116759 Jy
! Component: 900  -  total flux cleaned = 0.00118149 Jy
! Component: 950  -  total flux cleaned = 0.00118171 Jy
! Component: 1000  -  total flux cleaned = 0.00119502 Jy
! Component: 1050  -  total flux cleaned = 0.00120788 Jy
! Component: 1100  -  total flux cleaned = 0.00118196 Jy
! Component: 1150  -  total flux cleaned = 0.00114407 Jy
! Component: 1200  -  total flux cleaned = 0.00116924 Jy
! Component: 1250  -  total flux cleaned = 0.00119385 Jy
! Component: 1300  -  total flux cleaned = 0.00118146 Jy
! Component: 1350  -  total flux cleaned = 0.00118158 Jy
! Component: 1400  -  total flux cleaned = 0.00122823 Jy
! Component: 1450  -  total flux cleaned = 0.00121657 Jy
! Component: 1500  -  total flux cleaned = 0.00122784 Jy
! Component: 1550  -  total flux cleaned = 0.00125036 Jy
! Component: 1600  -  total flux cleaned = 0.00126145 Jy
! Component: 1650  -  total flux cleaned = 0.0013049 Jy
! Component: 1700  -  total flux cleaned = 0.00131573 Jy
! Component: 1750  -  total flux cleaned = 0.00132624 Jy
! Component: 1800  -  total flux cleaned = 0.00133688 Jy
! Component: 1850  -  total flux cleaned = 0.00133696 Jy
! Component: 1900  -  total flux cleaned = 0.00136737 Jy
! Component: 1950  -  total flux cleaned = 0.00137746 Jy
! Component: 2000  -  total flux cleaned = 0.00140689 Jy
! Component: 2050  -  total flux cleaned = 0.0014166 Jy
! Component: 2100  -  total flux cleaned = 0.00145526 Jy
! Component: 2150  -  total flux cleaned = 0.00148395 Jy
! Component: 2200  -  total flux cleaned = 0.00153089 Jy
! Component: 2250  -  total flux cleaned = 0.00154933 Jy
! Component: 2300  -  total flux cleaned = 0.00156784 Jy
! Component: 2350  -  total flux cleaned = 0.00163145 Jy
! Component: 2400  -  total flux cleaned = 0.00163144 Jy
! Component: 2450  -  total flux cleaned = 0.00164926 Jy
! Component: 2500  -  total flux cleaned = 0.00166681 Jy
! Component: 2550  -  total flux cleaned = 0.00170167 Jy
! Component: 2600  -  total flux cleaned = 0.00174484 Jy
! Component: 2650  -  total flux cleaned = 0.00172764 Jy
! Component: 2700  -  total flux cleaned = 0.00174461 Jy
! Component: 2750  -  total flux cleaned = 0.00173627 Jy
! Component: 2800  -  total flux cleaned = 0.00173626 Jy
! Component: 2850  -  total flux cleaned = 0.00176102 Jy
! Component: 2900  -  total flux cleaned = 0.00176099 Jy
! Component: 2950  -  total flux cleaned = 0.00175282 Jy
! Component: 3000  -  total flux cleaned = 0.00173659 Jy
! Component: 3050  -  total flux cleaned = 0.0017607 Jy
! Component: 3100  -  total flux cleaned = 0.00178453 Jy
! Component: 3150  -  total flux cleaned = 0.00176084 Jy
! Component: 3200  -  total flux cleaned = 0.00180012 Jy
! Component: 3250  -  total flux cleaned = 0.00183126 Jy
! Component: 3300  -  total flux cleaned = 0.00186217 Jy
! Component: 3350  -  total flux cleaned = 0.00184668 Jy
! Component: 3400  -  total flux cleaned = 0.00188481 Jy
! Component: 3450  -  total flux cleaned = 0.00188479 Jy
! Component: 3500  -  total flux cleaned = 0.00189224 Jy
! Component: 3550  -  total flux cleaned = 0.00189975 Jy
! Component: 3600  -  total flux cleaned = 0.0019072 Jy
! Component: 3650  -  total flux cleaned = 0.0019443 Jy
! Component: 3700  -  total flux cleaned = 0.00194426 Jy
! Component: 3750  -  total flux cleaned = 0.0019443 Jy
! Component: 3800  -  total flux cleaned = 0.00197345 Jy
! Component: 3850  -  total flux cleaned = 0.00197338 Jy
! Component: 3900  -  total flux cleaned = 0.0020022 Jy
! Component: 3950  -  total flux cleaned = 0.00202374 Jy
! Component: 4000  -  total flux cleaned = 0.00204516 Jy
! Component: 4050  -  total flux cleaned = 0.00206644 Jy
! Total flux subtracted in 4096 components = 0.00205936 Jy
! Clean residual min=-0.000385 max=0.000482 Jy/beam
! Clean residual mean=-0.000001 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0646623 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 396 components and 0.0646624 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0154+1113_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.621 x 9.911 at 11.07 degrees (North through East)
! Clean map  min=-0.00093733  max=0.055637 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0154+1113_S_map.fits
wmodel /image_prod/ug002_uva//J0154+1113_S_map.mod
! Writing 396 model components to file: /image_prod/ug002_uva//J0154+1113_S_map.mod
wobs   /image_prod/ug002_uva//J0154+1113_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0154+1113_S_uvs.fits
wwins  /image_prod/ug002_uva//J0154+1113_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0154+1113_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0556368 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00012859 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.693373 0.693373 1.38675 2.77349 5.54698 11.094 22.1879 44.3759 88.7517
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  432.667 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0154+1113_S_dfm.log closed on Wed Mar  4 19:17:59 2020