! Started logfile: /image_prod/ug002_uva//J0151-1732_S_dfm.log on Wed Mar  4 19:15:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0151-1732_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0151-1732_S_uva.fits
! AN table 1: 20 integrations on 36 of 36 possible baselines.
! AN table 2: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.971528 visibilities/baseline/integration-bin.
! Found source: J0151-1732
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4197 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0151-1732_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.060092Jy  sigma=7.319468
! Fit after  self-cal, rms=0.735445Jy  sigma=5.120999
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.626 mas, bmaj=6.701 mas, bpa=-4.843 degrees
! Estimated noise=2.25088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203823 Jy
! Component: 100  -  total flux cleaned = 0.251935 Jy
! Total flux subtracted in 100 components = 0.251935 Jy
! Clean residual min=-0.012738 max=0.018368 Jy/beam
! Clean residual mean=-0.000024 rms=0.003561 Jy/beam
! Combined flux in latest and established models = 0.251935 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.251935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097155Jy  sigma=0.555191
! Fit after  self-cal, rms=0.097151Jy  sigma=0.555137
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.147 mas, bmaj=7.774 mas, bpa=-3.327 degrees
! Estimated noise=1.64522 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221337 Jy
! Component: 100  -  total flux cleaned = 0.0305186 Jy
! Component: 150  -  total flux cleaned = 0.0346274 Jy
! Component: 200  -  total flux cleaned = 0.0367511 Jy
! Total flux subtracted in 200 components = 0.0367511 Jy
! Clean residual min=-0.013443 max=0.011954 Jy/beam
! Clean residual mean=0.000014 rms=0.003077 Jy/beam
! Combined flux in latest and established models = 0.288686 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 26 components and 0.288686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092124Jy  sigma=0.521029
! Fit after  self-cal, rms=0.092116Jy  sigma=0.520903
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.147 x 7.774 at -3.327 degrees (North through East)
! Clean map  min=-0.013008  max=0.26232 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     KP        1.04     LA        1.05     
!   MK        0.93     NL        1.04     OV        0.84     PT        1.06     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.77     FD        0.92     HN        1.13     KP        1.04     
!   LA        1.05     MK        1.46     OV        0.84     PT        1.06     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.74     FD        1.02     KP        1.05     LA        1.04     
!   MK        0.92     NL        1.15     OV        0.94     PT        1.08     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.74     FD        0.80     HN        1.00     KP        1.02     
!   LA        1.05     MK        1.01     OV        0.96     PT        1.07     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.29     FD        0.98     KP        1.06     LA        1.04     
!   MK        0.93     NL        1.09     OV        0.84     PT        1.03     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.74     FD        0.86     HN        1.01     KP        1.07     
!   LA        1.03     MK        0.90     OV        0.84     PT        1.04     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.092116Jy  sigma=0.520903
! Fit after  self-cal, rms=0.077190Jy  sigma=0.442119
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=7.858 mas, bpa=-2.946 degrees
! Estimated noise=1.64568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000316997 Jy
! Component: 100  -  total flux cleaned = -0.000564258 Jy
! Component: 150  -  total flux cleaned = -0.000494056 Jy
! Component: 200  -  total flux cleaned = -0.000493823 Jy
! Total flux subtracted in 200 components = -0.000493823 Jy
! Clean residual min=-0.003444 max=0.004077 Jy/beam
! Clean residual mean=-0.000004 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.288192 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.288192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077030Jy  sigma=0.441155
! Fit after  self-cal, rms=0.077080Jy  sigma=0.440840
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077080Jy  sigma=0.440840
! Fit after  self-cal, rms=0.077382Jy  sigma=0.440756
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.143 mas, bmaj=7.878 mas, bpa=-2.933 degrees
! Estimated noise=1.64685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298555 Jy
! Component: 100  -  total flux cleaned = -0.000362143 Jy
! Component: 150  -  total flux cleaned = -0.000311677 Jy
! Component: 200  -  total flux cleaned = -0.000311539 Jy
! Total flux subtracted in 200 components = -0.000311539 Jy
! Clean residual min=-0.003361 max=0.004003 Jy/beam
! Clean residual mean=-0.000005 rms=0.000851 Jy/beam
! Combined flux in latest and established models = 0.287881 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.287881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077292Jy  sigma=0.440251
! Fit after  self-cal, rms=0.077279Jy  sigma=0.440226
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (100.5, -22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00239705 Jy
! Component: 100  -  total flux cleaned = 0.0023123 Jy
! Component: 150  -  total flux cleaned = 0.00231346 Jy
! Component: 200  -  total flux cleaned = 0.00225373 Jy
! Total flux subtracted in 200 components = 0.00225373 Jy
! Clean residual min=-0.003273 max=0.003090 Jy/beam
! Clean residual mean=-0.000004 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.290134 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.290134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077059Jy  sigma=0.438932
! Fit after  self-cal, rms=0.077051Jy  sigma=0.438885
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077051Jy  sigma=0.438885
! Fit after  self-cal, rms=0.077225Jy  sigma=0.438805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=7.89 mas, bpa=-2.913 degrees
! Estimated noise=1.64643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.84138e-05 Jy
! Component: 100  -  total flux cleaned = -0.000225756 Jy
! Component: 150  -  total flux cleaned = -0.000374807 Jy
! Component: 200  -  total flux cleaned = -0.000513856 Jy
! Total flux subtracted in 200 components = -0.000513856 Jy
! Clean residual min=-0.003185 max=0.003044 Jy/beam
! Clean residual mean=-0.000004 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.289621 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 0.289621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077147Jy  sigma=0.438398
! Fit after  self-cal, rms=0.077145Jy  sigma=0.438389
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.9063e-05 Jy
! Component: 100  -  total flux cleaned = -0.000165093 Jy
! Component: 150  -  total flux cleaned = -0.000284449 Jy
! Component: 200  -  total flux cleaned = -0.000321648 Jy
! Total flux subtracted in 200 components = -0.000321648 Jy
! Clean residual min=-0.003138 max=0.003024 Jy/beam
! Clean residual mean=-0.000004 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.289299 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 65 components and 0.289299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077097Jy  sigma=0.438148
! Fit after  self-cal, rms=0.077093Jy  sigma=0.438143
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077093Jy  sigma=0.438143
! Fit after  self-cal, rms=0.077101Jy  sigma=0.438116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.667 mas, bmaj=16.71 mas, bpa=1.606 degrees
! Estimated noise=2.08673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00052257 Jy
! Component: 100  -  total flux cleaned = 0.000436113 Jy
! Component: 150  -  total flux cleaned = 0.000410235 Jy
! Component: 200  -  total flux cleaned = 0.000385255 Jy
! Total flux subtracted in 200 components = 0.000385255 Jy
! Clean residual min=-0.003246 max=0.003140 Jy/beam
! Clean residual mean=-0.000007 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.289684 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 70 components and 0.289684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077096Jy  sigma=0.438084
! Fit after  self-cal, rms=0.077087Jy  sigma=0.438063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.52387e-06 Jy
! Component: 100  -  total flux cleaned = -1.41381e-05 Jy
! Component: 150  -  total flux cleaned = -1.47974e-05 Jy
! Component: 200  -  total flux cleaned = 3.99246e-06 Jy
! Total flux subtracted in 200 components = 3.99246e-06 Jy
! Clean residual min=-0.003223 max=0.003115 Jy/beam
! Clean residual mean=-0.000007 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.289688 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 77 components and 0.289688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077089Jy  sigma=0.438106
! Fit after  self-cal, rms=0.077083Jy  sigma=0.438097
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=7.895 mas, bpa=-2.91 degrees
! Estimated noise=1.64527 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.144 x 7.895 at -2.91 degrees (North through East)
! Clean map  min=-0.0028554  max=0.26269 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.628 mas, bmaj=6.794 mas, bpa=-4.684 degrees
! Estimated noise=2.23594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.20239 Jy
! Component: 100  -  total flux cleaned = 0.249884 Jy
! Component: 150  -  total flux cleaned = 0.26861 Jy
! Component: 200  -  total flux cleaned = 0.277218 Jy
! Total flux subtracted in 200 components = 0.277218 Jy
! Clean residual min=-0.005167 max=0.004849 Jy/beam
! Clean residual mean=-0.000012 rms=0.001199 Jy/beam
! Combined flux in latest and established models = 0.277218 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.277218 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=7.895 mas, bpa=-2.91 degrees
! Estimated noise=1.64527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00624549 Jy
! Component: 100  -  total flux cleaned = 0.00918258 Jy
! Component: 150  -  total flux cleaned = 0.010317 Jy
! Component: 200  -  total flux cleaned = 0.0105761 Jy
! Total flux subtracted in 200 components = 0.0105761 Jy
! Clean residual min=-0.003457 max=0.003045 Jy/beam
! Clean residual mean=-0.000008 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.287794 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.287794 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.667 mas, bmaj=16.71 mas, bpa=1.606 degrees
! Estimated noise=2.08673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013628 Jy
! Component: 100  -  total flux cleaned = 0.00155325 Jy
! Component: 150  -  total flux cleaned = 0.00161488 Jy
! Component: 200  -  total flux cleaned = 0.00164313 Jy
! Total flux subtracted in 200 components = 0.00164313 Jy
! Clean residual min=-0.003247 max=0.003044 Jy/beam
! Clean residual mean=-0.000010 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.289437 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.30303e-05 Jy
! Component: 100  -  total flux cleaned = 2.31875e-05 Jy
! Component: 150  -  total flux cleaned = 2.22942e-05 Jy
! Component: 200  -  total flux cleaned = -1.63194e-05 Jy
! Total flux subtracted in 200 components = -1.63194e-05 Jy
! Clean residual min=-0.003222 max=0.003050 Jy/beam
! Clean residual mean=-0.000009 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.289421 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 47 components and 0.289421 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=7.895 mas, bpa=-2.91 degrees
! Estimated noise=1.64527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000293659 Jy
! Component: 100  -  total flux cleaned = -0.000413697 Jy
! Component: 150  -  total flux cleaned = -0.000517022 Jy
! Component: 200  -  total flux cleaned = -0.000562192 Jy
! Total flux subtracted in 200 components = -0.000562192 Jy
! Clean residual min=-0.003175 max=0.002980 Jy/beam
! Clean residual mean=-0.000005 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.288859 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 57 components and 0.288859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077034Jy  sigma=0.437915
! Fit after  self-cal, rms=0.077010Jy  sigma=0.437859
wmodel J0151-1732_S_map.mod
! Writing 57 model components to file: J0151-1732_S_map.mod
wobs   J0151-1732_S_uvs.fits
! Writing UV FITS file: J0151-1732_S_uvs.fits
wwins  J0151-1732_S_map.win
! wwins: Wrote 2 windows to J0151-1732_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000520572 Jy
! Component: 100  -  total flux cleaned = -0.000526163 Jy
! Component: 150  -  total flux cleaned = -0.000662089 Jy
! Component: 200  -  total flux cleaned = -0.000838372 Jy
! Component: 250  -  total flux cleaned = -0.00113616 Jy
! Component: 300  -  total flux cleaned = -0.00150551 Jy
! Component: 350  -  total flux cleaned = -0.00182298 Jy
! Component: 400  -  total flux cleaned = -0.00216968 Jy
! Component: 450  -  total flux cleaned = -0.00235624 Jy
! Component: 500  -  total flux cleaned = -0.00250112 Jy
! Component: 550  -  total flux cleaned = -0.00257161 Jy
! Component: 600  -  total flux cleaned = -0.00267648 Jy
! Component: 650  -  total flux cleaned = -0.00291473 Jy
! Component: 700  -  total flux cleaned = -0.00314686 Jy
! Component: 750  -  total flux cleaned = -0.00340697 Jy
! Component: 800  -  total flux cleaned = -0.00356548 Jy
! Component: 850  -  total flux cleaned = -0.00369085 Jy
! Component: 900  -  total flux cleaned = -0.00381416 Jy
! Component: 950  -  total flux cleaned = -0.00402543 Jy
! Component: 1000  -  total flux cleaned = -0.00411354 Jy
! Component: 1050  -  total flux cleaned = -0.00417128 Jy
! Component: 1100  -  total flux cleaned = -0.00428454 Jy
! Component: 1150  -  total flux cleaned = -0.00434061 Jy
! Component: 1200  -  total flux cleaned = -0.00436847 Jy
! Component: 1250  -  total flux cleaned = -0.00450378 Jy
! Component: 1300  -  total flux cleaned = -0.00460967 Jy
! Component: 1350  -  total flux cleaned = -0.0045574 Jy
! Component: 1400  -  total flux cleaned = -0.00460926 Jy
! Component: 1450  -  total flux cleaned = -0.00468558 Jy
! Component: 1500  -  total flux cleaned = -0.00463601 Jy
! Component: 1550  -  total flux cleaned = -0.00468557 Jy
! Component: 1600  -  total flux cleaned = -0.00468567 Jy
! Component: 1650  -  total flux cleaned = -0.00468565 Jy
! Component: 1700  -  total flux cleaned = -0.00468535 Jy
! Component: 1750  -  total flux cleaned = -0.00459173 Jy
! Component: 1800  -  total flux cleaned = -0.00452296 Jy
! Component: 1850  -  total flux cleaned = -0.00450037 Jy
! Component: 1900  -  total flux cleaned = -0.00443298 Jy
! Component: 1950  -  total flux cleaned = -0.00441072 Jy
! Component: 2000  -  total flux cleaned = -0.00434512 Jy
! Component: 2050  -  total flux cleaned = -0.00428019 Jy
! Component: 2100  -  total flux cleaned = -0.00423711 Jy
! Component: 2150  -  total flux cleaned = -0.00415217 Jy
! Component: 2200  -  total flux cleaned = -0.00413101 Jy
! Component: 2250  -  total flux cleaned = -0.00404832 Jy
! Component: 2300  -  total flux cleaned = -0.00400731 Jy
! Component: 2350  -  total flux cleaned = -0.00396652 Jy
! Component: 2400  -  total flux cleaned = -0.00396661 Jy
! Component: 2450  -  total flux cleaned = -0.00390685 Jy
! Component: 2500  -  total flux cleaned = -0.00396633 Jy
! Component: 2550  -  total flux cleaned = -0.00396633 Jy
! Component: 2600  -  total flux cleaned = -0.00398544 Jy
! Component: 2650  -  total flux cleaned = -0.00392771 Jy
! Component: 2700  -  total flux cleaned = -0.00396548 Jy
! Component: 2750  -  total flux cleaned = -0.00392798 Jy
! Component: 2800  -  total flux cleaned = -0.00389079 Jy
! Component: 2850  -  total flux cleaned = -0.00390949 Jy
! Component: 2900  -  total flux cleaned = -0.00394621 Jy
! Component: 2950  -  total flux cleaned = -0.00398268 Jy
! Component: 3000  -  total flux cleaned = -0.00400052 Jy
! Component: 3050  -  total flux cleaned = -0.00398277 Jy
! Component: 3100  -  total flux cleaned = -0.00400068 Jy
! Component: 3150  -  total flux cleaned = -0.0040535 Jy
! Component: 3200  -  total flux cleaned = -0.00405335 Jy
! Component: 3250  -  total flux cleaned = -0.00403606 Jy
! Component: 3300  -  total flux cleaned = -0.00405322 Jy
! Component: 3350  -  total flux cleaned = -0.00400199 Jy
! Component: 3400  -  total flux cleaned = -0.004019 Jy
! Component: 3450  -  total flux cleaned = -0.00395168 Jy
! Component: 3500  -  total flux cleaned = -0.00393526 Jy
! Component: 3550  -  total flux cleaned = -0.00391859 Jy
! Component: 3600  -  total flux cleaned = -0.0038692 Jy
! Component: 3650  -  total flux cleaned = -0.00386921 Jy
! Component: 3700  -  total flux cleaned = -0.0038691 Jy
! Component: 3750  -  total flux cleaned = -0.00382057 Jy
! Component: 3800  -  total flux cleaned = -0.00385257 Jy
! Component: 3850  -  total flux cleaned = -0.00380473 Jy
! Component: 3900  -  total flux cleaned = -0.00380466 Jy
! Component: 3950  -  total flux cleaned = -0.00380461 Jy
! Component: 4000  -  total flux cleaned = -0.00378885 Jy
! Component: 4050  -  total flux cleaned = -0.00377322 Jy
! Total flux subtracted in 4096 components = -0.00372632 Jy
! Clean residual min=-0.000941 max=0.000845 Jy/beam
! Clean residual mean=0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.285133 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 336 components and 0.285133 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0151-1732_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.144 x 7.895 at -2.91 degrees (North through East)
! Clean map  min=-0.0018962  max=0.264 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0151-1732_S_map.fits
wmodel /image_prod/ug002_uva//J0151-1732_S_map.mod
! Writing 336 model components to file: /image_prod/ug002_uva//J0151-1732_S_map.mod
wobs   /image_prod/ug002_uva//J0151-1732_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0151-1732_S_uvs.fits
wwins  /image_prod/ug002_uva//J0151-1732_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0151-1732_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.264004 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000262474 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.298262 0.298262 0.596523 1.19305 2.38609 4.77219 9.54437 19.0887 38.1775 76.355
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.264 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1005.83 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0151-1732_S_dfm.log closed on Wed Mar  4 19:15:50 2020