! Started logfile: /image_prod/ug002_uva//J0148+4215_S_dfm.log on Wed Mar  4 19:14:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0148+4215_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0148+4215_S_uva.fits
! AN table 1: 30 integrations on 21 of 21 possible baselines.
! AN table 2: 15 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.75619 visibilities/baseline/integration-bin.
! Found source: J0148+4215
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2382 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0148+4215_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.009760Jy  sigma=8.844514
! Fit after  self-cal, rms=0.919102Jy  sigma=8.029265
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=4.578 mas, bpa=6.937 degrees
! Estimated noise=2.37613 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0647483 Jy
! Component: 100  -  total flux cleaned = 0.0790023 Jy
! Total flux subtracted in 100 components = 0.0790023 Jy
! Clean residual min=-0.005005 max=0.005643 Jy/beam
! Clean residual mean=-0.000010 rms=0.001334 Jy/beam
! Combined flux in latest and established models = 0.0790023 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0790023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054624Jy  sigma=0.433994
! Fit after  self-cal, rms=0.054108Jy  sigma=0.429011
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.916 mas, bmaj=5.39 mas, bpa=7.127 degrees
! Estimated noise=1.70902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452263 Jy
! Component: 100  -  total flux cleaned = 0.00550991 Jy
! Component: 150  -  total flux cleaned = 0.00583918 Jy
! Component: 200  -  total flux cleaned = 0.00596925 Jy
! Total flux subtracted in 200 components = 0.00596925 Jy
! Clean residual min=-0.004096 max=0.003968 Jy/beam
! Clean residual mean=-0.000005 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.0849715 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 20 components and 0.0849715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053784Jy  sigma=0.425353
! Fit after  self-cal, rms=0.053783Jy  sigma=0.425297
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.916 x 5.39 at 7.127 degrees (North through East)
! Clean map  min=-0.0039941  max=0.083195 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     KP        1.04     MK        0.93     
!   NL        1.17     OV        0.92     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        0.98     HN        0.94     KP        0.99     
!   MK        0.99     NL        0.90     OV        0.92     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.02     KP        1.07     MK        1.04     
!   NL        1.33     OV        0.91     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.00     HN        1.00     KP        1.14     
!   MK        0.99     NL        0.92     OV        0.87     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        0.98     KP        1.01     MK        0.98     
!   NL        1.14     OV        0.91     PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        1.00     HN        0.97     KP        0.94     
!   MK        1.03     NL        0.99     OV        0.91     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.053783Jy  sigma=0.425297
! Fit after  self-cal, rms=0.055098Jy  sigma=0.419124
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=5.427 mas, bpa=8.89 degrees
! Estimated noise=1.70959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000514056 Jy
! Component: 100  -  total flux cleaned = 0.000613701 Jy
! Component: 150  -  total flux cleaned = 0.000613976 Jy
! Component: 200  -  total flux cleaned = 0.000613772 Jy
! Total flux subtracted in 200 components = 0.000613772 Jy
! Clean residual min=-0.003018 max=0.002896 Jy/beam
! Clean residual mean=-0.000001 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.0855853 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 25 components and 0.0855853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055075Jy  sigma=0.418918
! Fit after  self-cal, rms=0.055189Jy  sigma=0.418746
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055189Jy  sigma=0.418746
! Fit after  self-cal, rms=0.055512Jy  sigma=0.418102
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.889 mas, bmaj=5.419 mas, bpa=8.808 degrees
! Estimated noise=1.71228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028694 Jy
! Component: 100  -  total flux cleaned = 0.00032022 Jy
! Component: 150  -  total flux cleaned = 0.000335796 Jy
! Component: 200  -  total flux cleaned = 0.000336314 Jy
! Total flux subtracted in 200 components = 0.000336314 Jy
! Clean residual min=-0.002940 max=0.002884 Jy/beam
! Clean residual mean=-0.000001 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0859216 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 29 components and 0.0859216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055497Jy  sigma=0.418063
! Fit after  self-cal, rms=0.055510Jy  sigma=0.418042
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.15255e-06 Jy
! Component: 100  -  total flux cleaned = 2.46192e-06 Jy
! Component: 150  -  total flux cleaned = 2.48471e-06 Jy
! Component: 200  -  total flux cleaned = -1.04589e-05 Jy
! Total flux subtracted in 200 components = -1.04589e-05 Jy
! Clean residual min=-0.002935 max=0.002860 Jy/beam
! Clean residual mean=-0.000001 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.0859112 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.0859112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055499Jy  sigma=0.418013
! Fit after  self-cal, rms=0.055501Jy  sigma=0.418009
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055501Jy  sigma=0.418009
! Fit after  self-cal, rms=0.055592Jy  sigma=0.418001
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.884 mas, bmaj=5.413 mas, bpa=8.867 degrees
! Estimated noise=1.71435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339772 Jy
! Component: 100  -  total flux cleaned = 0.000366571 Jy
! Component: 150  -  total flux cleaned = 0.00035389 Jy
! Component: 200  -  total flux cleaned = 0.000353769 Jy
! Total flux subtracted in 200 components = 0.000353769 Jy
! Clean residual min=-0.002924 max=0.002859 Jy/beam
! Clean residual mean=-0.000001 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.0862649 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.0862649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055581Jy  sigma=0.417976
! Fit after  self-cal, rms=0.055583Jy  sigma=0.417974
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.03662e-06 Jy
! Component: 100  -  total flux cleaned = -1.327e-05 Jy
! Component: 150  -  total flux cleaned = -1.33719e-05 Jy
! Component: 200  -  total flux cleaned = -2.50256e-05 Jy
! Total flux subtracted in 200 components = -2.50256e-05 Jy
! Clean residual min=-0.002927 max=0.002844 Jy/beam
! Clean residual mean=-0.000001 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.0862399 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.0862399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055575Jy  sigma=0.417950
! Fit after  self-cal, rms=0.055576Jy  sigma=0.417948
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055576Jy  sigma=0.417948
! Fit after  self-cal, rms=0.055616Jy  sigma=0.417942
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.657 mas, bmaj=10.2 mas, bpa=20.46 degrees
! Estimated noise=2.08044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287894 Jy
! Component: 100  -  total flux cleaned = 0.000323589 Jy
! Component: 150  -  total flux cleaned = 0.000353372 Jy
! Component: 200  -  total flux cleaned = 0.000372238 Jy
! Total flux subtracted in 200 components = 0.000372238 Jy
! Clean residual min=-0.003250 max=0.002483 Jy/beam
! Clean residual mean=-0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.0866122 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 42 components and 0.0866122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055618Jy  sigma=0.417944
! Fit after  self-cal, rms=0.055613Jy  sigma=0.417936
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.39258e-05 Jy
! Component: 100  -  total flux cleaned = -2.0262e-05 Jy
! Component: 150  -  total flux cleaned = -2.59533e-05 Jy
! Component: 200  -  total flux cleaned = -3.12881e-05 Jy
! Total flux subtracted in 200 components = -3.12881e-05 Jy
! Clean residual min=-0.003251 max=0.002479 Jy/beam
! Clean residual mean=-0.000001 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.0865809 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 46 components and 0.0865809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055615Jy  sigma=0.417954
! Fit after  self-cal, rms=0.055613Jy  sigma=0.417950
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.88 mas, bmaj=5.407 mas, bpa=8.924 degrees
! Estimated noise=1.71586 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.88 x 5.407 at 8.924 degrees (North through East)
! Clean map  min=-0.0027841  max=0.083206 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=4.61 mas, bpa=8.447 degrees
! Estimated noise=2.36506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0643482 Jy
! Component: 100  -  total flux cleaned = 0.0787417 Jy
! Component: 150  -  total flux cleaned = 0.0833905 Jy
! Component: 200  -  total flux cleaned = 0.0854085 Jy
! Total flux subtracted in 200 components = 0.0854085 Jy
! Clean residual min=-0.003685 max=0.004049 Jy/beam
! Clean residual mean=-0.000004 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.0854085 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0854085 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.88 mas, bmaj=5.407 mas, bpa=8.924 degrees
! Estimated noise=1.71586 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122301 Jy
! Component: 100  -  total flux cleaned = 0.00116733 Jy
! Component: 150  -  total flux cleaned = 0.00116422 Jy
! Component: 200  -  total flux cleaned = 0.00119905 Jy
! Total flux subtracted in 200 components = 0.00119905 Jy
! Clean residual min=-0.003123 max=0.002820 Jy/beam
! Clean residual mean=-0.000001 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.0866075 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 24 components and 0.0866075 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.657 mas, bmaj=10.2 mas, bpa=20.46 degrees
! Estimated noise=2.08044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000331794 Jy
! Component: 100  -  total flux cleaned = -0.000298507 Jy
! Component: 150  -  total flux cleaned = -0.000258183 Jy
! Component: 200  -  total flux cleaned = -0.00021729 Jy
! Total flux subtracted in 200 components = -0.00021729 Jy
! Clean residual min=-0.003270 max=0.002451 Jy/beam
! Clean residual mean=-0.000001 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.0863902 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.36898e-05 Jy
! Component: 100  -  total flux cleaned = 4.31263e-05 Jy
! Component: 150  -  total flux cleaned = 5.42306e-05 Jy
! Component: 200  -  total flux cleaned = 6.43677e-05 Jy
! Total flux subtracted in 200 components = 6.43677e-05 Jy
! Clean residual min=-0.003259 max=0.002464 Jy/beam
! Clean residual mean=-0.000001 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.0864546 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 43 components and 0.0864546 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.88 mas, bmaj=5.407 mas, bpa=8.924 degrees
! Estimated noise=1.71586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.31601e-05 Jy
! Component: 100  -  total flux cleaned = 5.40554e-05 Jy
! Component: 150  -  total flux cleaned = 3.13794e-05 Jy
! Component: 200  -  total flux cleaned = 5.15597e-05 Jy
! Total flux subtracted in 200 components = 5.15597e-05 Jy
! Clean residual min=-0.003010 max=0.002888 Jy/beam
! Clean residual mean=-0.000001 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.0865062 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.0865062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055638Jy  sigma=0.418070
! Fit after  self-cal, rms=0.055634Jy  sigma=0.418034
wmodel J0148+4215_S_map.mod
! Writing 55 model components to file: J0148+4215_S_map.mod
wobs   J0148+4215_S_uvs.fits
! Writing UV FITS file: J0148+4215_S_uvs.fits
wwins  J0148+4215_S_map.win
! wwins: Wrote 1 windows to J0148+4215_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234815 Jy
! Component: 100  -  total flux cleaned = 0.000562236 Jy
! Component: 150  -  total flux cleaned = 0.000779362 Jy
! Component: 200  -  total flux cleaned = 0.00106865 Jy
! Component: 250  -  total flux cleaned = 0.00122522 Jy
! Component: 300  -  total flux cleaned = 0.00126246 Jy
! Component: 350  -  total flux cleaned = 0.00122519 Jy
! Component: 400  -  total flux cleaned = 0.00118964 Jy
! Component: 450  -  total flux cleaned = 0.00122297 Jy
! Component: 500  -  total flux cleaned = 0.00122248 Jy
! Component: 550  -  total flux cleaned = 0.00122201 Jy
! Component: 600  -  total flux cleaned = 0.00125299 Jy
! Component: 650  -  total flux cleaned = 0.0012221 Jy
! Component: 700  -  total flux cleaned = 0.00131138 Jy
! Component: 750  -  total flux cleaned = 0.00128218 Jy
! Component: 800  -  total flux cleaned = 0.00131082 Jy
! Component: 850  -  total flux cleaned = 0.00136661 Jy
! Component: 900  -  total flux cleaned = 0.00136647 Jy
! Component: 950  -  total flux cleaned = 0.00139313 Jy
! Component: 1000  -  total flux cleaned = 0.00147179 Jy
! Component: 1050  -  total flux cleaned = 0.00147124 Jy
! Component: 1100  -  total flux cleaned = 0.00152168 Jy
! Component: 1150  -  total flux cleaned = 0.0015714 Jy
! Component: 1200  -  total flux cleaned = 0.00169367 Jy
! Component: 1250  -  total flux cleaned = 0.0016933 Jy
! Component: 1300  -  total flux cleaned = 0.00176386 Jy
! Component: 1350  -  total flux cleaned = 0.0016938 Jy
! Component: 1400  -  total flux cleaned = 0.00173981 Jy
! Component: 1450  -  total flux cleaned = 0.00171731 Jy
! Component: 1500  -  total flux cleaned = 0.00178428 Jy
! Component: 1550  -  total flux cleaned = 0.00174008 Jy
! Component: 1600  -  total flux cleaned = 0.00171815 Jy
! Component: 1650  -  total flux cleaned = 0.00167519 Jy
! Component: 1700  -  total flux cleaned = 0.00173878 Jy
! Component: 1750  -  total flux cleaned = 0.0017594 Jy
! Component: 1800  -  total flux cleaned = 0.00169754 Jy
! Component: 1850  -  total flux cleaned = 0.00177877 Jy
! Component: 1900  -  total flux cleaned = 0.00165822 Jy
! Component: 1950  -  total flux cleaned = 0.00171778 Jy
! Component: 2000  -  total flux cleaned = 0.00169801 Jy
! Component: 2050  -  total flux cleaned = 0.00165943 Jy
! Component: 2100  -  total flux cleaned = 0.00165928 Jy
! Component: 2150  -  total flux cleaned = 0.00162144 Jy
! Component: 2200  -  total flux cleaned = 0.00158382 Jy
! Component: 2250  -  total flux cleaned = 0.00158377 Jy
! Component: 2300  -  total flux cleaned = 0.0015652 Jy
! Component: 2350  -  total flux cleaned = 0.00151034 Jy
! Component: 2400  -  total flux cleaned = 0.00154657 Jy
! Component: 2450  -  total flux cleaned = 0.00145646 Jy
! Component: 2500  -  total flux cleaned = 0.00145651 Jy
! Component: 2550  -  total flux cleaned = 0.0014387 Jy
! Component: 2600  -  total flux cleaned = 0.00140353 Jy
! Component: 2650  -  total flux cleaned = 0.00135132 Jy
! Component: 2700  -  total flux cleaned = 0.00131697 Jy
! Component: 2750  -  total flux cleaned = 0.00129981 Jy
! Component: 2800  -  total flux cleaned = 0.00126586 Jy
! Component: 2850  -  total flux cleaned = 0.00121534 Jy
! Component: 2900  -  total flux cleaned = 0.00124875 Jy
! Component: 2950  -  total flux cleaned = 0.00121548 Jy
! Component: 3000  -  total flux cleaned = 0.00118251 Jy
! Component: 3050  -  total flux cleaned = 0.00114965 Jy
! Component: 3100  -  total flux cleaned = 0.00113346 Jy
! Component: 3150  -  total flux cleaned = 0.00111721 Jy
! Component: 3200  -  total flux cleaned = 0.00103715 Jy
! Component: 3250  -  total flux cleaned = 0.00102142 Jy
! Component: 3300  -  total flux cleaned = 0.000989896 Jy
! Component: 3350  -  total flux cleaned = 0.000942925 Jy
! Component: 3400  -  total flux cleaned = 0.000927402 Jy
! Component: 3450  -  total flux cleaned = 0.000865413 Jy
! Component: 3500  -  total flux cleaned = 0.000834731 Jy
! Component: 3550  -  total flux cleaned = 0.000834775 Jy
! Component: 3600  -  total flux cleaned = 0.000849964 Jy
! Component: 3650  -  total flux cleaned = 0.000789379 Jy
! Component: 3700  -  total flux cleaned = 0.000789397 Jy
! Component: 3750  -  total flux cleaned = 0.000744441 Jy
! Component: 3800  -  total flux cleaned = 0.0007595 Jy
! Component: 3850  -  total flux cleaned = 0.00075951 Jy
! Component: 3900  -  total flux cleaned = 0.00075953 Jy
! Component: 3950  -  total flux cleaned = 0.000774255 Jy
! Component: 4000  -  total flux cleaned = 0.00074487 Jy
! Component: 4050  -  total flux cleaned = 0.000759471 Jy
! Total flux subtracted in 4096 components = 0.000773998 Jy
! Clean residual min=-0.001117 max=0.000770 Jy/beam
! Clean residual mean=0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.0872802 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 309 components and 0.0872802 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0148+4215_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.88 x 5.407 at 8.924 degrees (North through East)
! Clean map  min=-0.0016444  max=0.083255 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0148+4215_S_map.fits
wmodel /image_prod/ug002_uva//J0148+4215_S_map.mod
! Writing 309 model components to file: /image_prod/ug002_uva//J0148+4215_S_map.mod
wobs   /image_prod/ug002_uva//J0148+4215_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0148+4215_S_uvs.fits
wwins  /image_prod/ug002_uva//J0148+4215_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0148+4215_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0832548 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00023771 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.856563 0.856563 1.71313 3.42625 6.85251 13.705 27.41 54.82
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  350.236 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0148+4215_S_dfm.log closed on Wed Mar  4 19:14:14 2020