! Started logfile: /image_prod/ug002_uva//J0144-3938_S_dfm.log on Wed Mar 4 19:13:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0144-3938_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0144-3938_S_uva.fits ! AN table 1: 60 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.996825 visibilities/baseline/integration-bin. ! Found source: J0144-3938 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3768 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0144-3938_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.008835Jy sigma=5.616595 ! Fit after self-cal, rms=0.890481Jy sigma=4.917176 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=6.346 mas, bpa=-3.334 degrees ! Estimated noise=3.12393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0863464 Jy ! Component: 100 - total flux cleaned = 0.106802 Jy ! Total flux subtracted in 100 components = 0.106802 Jy ! Clean residual min=-0.007635 max=0.008914 Jy/beam ! Clean residual mean=-0.000006 rms=0.002013 Jy/beam ! Combined flux in latest and established models = 0.106802 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.106802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093864Jy sigma=0.475911 ! Fit after self-cal, rms=0.093878Jy sigma=0.475749 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.464 mas, bpa=-3.821 degrees ! Estimated noise=2.12834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012092 Jy ! Component: 100 - total flux cleaned = 0.0174032 Jy ! Component: 150 - total flux cleaned = 0.0200153 Jy ! Component: 200 - total flux cleaned = 0.02131 Jy ! Total flux subtracted in 200 components = 0.02131 Jy ! Clean residual min=-0.004764 max=0.005350 Jy/beam ! Clean residual mean=-0.000021 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.128112 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.128112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092806Jy sigma=0.465443 ! Fit after self-cal, rms=0.092873Jy sigma=0.465355 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.824 x 7.464 at -3.821 degrees (North through East) ! Clean map min=-0.0046509 max=0.11481 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 0.92 LA 1.02 MK 0.98 ! NL 1.16 OV 0.96 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 KP 0.98 LA 0.94 MK 0.98 ! NL 1.23 OV 0.97 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 0.96 LA 1.03 MK 1.04 ! NL 1.13 OV 0.93 SC 0.98 ! ! ! Fit before self-cal, rms=0.092873Jy sigma=0.465355 ! Fit after self-cal, rms=0.097713Jy sigma=0.462291 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.478 mas, bpa=-3.709 degrees ! Estimated noise=2.12442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214174 Jy ! Component: 100 - total flux cleaned = -0.000283582 Jy ! Component: 150 - total flux cleaned = -0.00030406 Jy ! Component: 200 - total flux cleaned = -0.000285619 Jy ! Total flux subtracted in 200 components = -0.000285619 Jy ! Clean residual min=-0.004155 max=0.003533 Jy/beam ! Clean residual mean=-0.000013 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.127827 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.127827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097701Jy sigma=0.462236 ! Fit after self-cal, rms=0.097918Jy sigma=0.462105 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097918Jy sigma=0.462105 ! Fit after self-cal, rms=0.099306Jy sigma=0.461076 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=7.51 mas, bpa=-3.668 degrees ! Estimated noise=2.12887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.8817e-05 Jy ! Component: 100 - total flux cleaned = 0.000116486 Jy ! Component: 150 - total flux cleaned = 0.000116772 Jy ! Component: 200 - total flux cleaned = 0.000131566 Jy ! Total flux subtracted in 200 components = 0.000131566 Jy ! Clean residual min=-0.004096 max=0.003564 Jy/beam ! Clean residual mean=-0.000005 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.127958 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.127958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099296Jy sigma=0.461053 ! Fit after self-cal, rms=0.099330Jy sigma=0.461027 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.35434e-05 Jy ! Component: 100 - total flux cleaned = -6.31452e-05 Jy ! Component: 150 - total flux cleaned = -4.87011e-05 Jy ! Component: 200 - total flux cleaned = -4.84175e-05 Jy ! Total flux subtracted in 200 components = -4.84175e-05 Jy ! Clean residual min=-0.004103 max=0.003541 Jy/beam ! Clean residual mean=-0.000005 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.12791 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.12791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099323Jy sigma=0.461012 ! Fit after self-cal, rms=0.099324Jy sigma=0.461010 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099324Jy sigma=0.461010 ! Fit after self-cal, rms=0.100075Jy sigma=0.460916 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=7.531 mas, bpa=-3.604 degrees ! Estimated noise=2.13285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.73202e-05 Jy ! Component: 100 - total flux cleaned = -4.12405e-05 Jy ! Component: 150 - total flux cleaned = -4.08825e-05 Jy ! Component: 200 - total flux cleaned = -2.73572e-05 Jy ! Total flux subtracted in 200 components = -2.73572e-05 Jy ! Clean residual min=-0.004169 max=0.003566 Jy/beam ! Clean residual mean=-0.000002 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.127883 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.127883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100067Jy sigma=0.460893 ! Fit after self-cal, rms=0.100077Jy sigma=0.460887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.99847e-05 Jy ! Component: 100 - total flux cleaned = -2.62094e-05 Jy ! Component: 150 - total flux cleaned = -1.438e-05 Jy ! Component: 200 - total flux cleaned = -1.44447e-05 Jy ! Total flux subtracted in 200 components = -1.44447e-05 Jy ! Clean residual min=-0.004170 max=0.003539 Jy/beam ! Clean residual mean=-0.000002 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.127868 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.127868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100071Jy sigma=0.460875 ! Fit after self-cal, rms=0.100070Jy sigma=0.460873 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100070Jy sigma=0.460873 ! Fit after self-cal, rms=0.100332Jy sigma=0.460868 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.091 mas, bmaj=23.55 mas, bpa=-1.224 degrees ! Estimated noise=2.72729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289351 Jy ! Component: 100 - total flux cleaned = -0.000288616 Jy ! Component: 150 - total flux cleaned = -0.000288271 Jy ! Component: 200 - total flux cleaned = -0.000288042 Jy ! Total flux subtracted in 200 components = -0.000288042 Jy ! Clean residual min=-0.004408 max=0.003769 Jy/beam ! Clean residual mean=-0.000005 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.12758 Jy selfcal ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 52 components and 0.12758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100335Jy sigma=0.460876 ! Fit after self-cal, rms=0.100333Jy sigma=0.460873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78799e-05 Jy ! Component: 100 - total flux cleaned = -3.76496e-05 Jy ! Component: 150 - total flux cleaned = -3.77376e-05 Jy ! Component: 200 - total flux cleaned = -3.71805e-05 Jy ! Total flux subtracted in 200 components = -3.71805e-05 Jy ! Clean residual min=-0.004414 max=0.003781 Jy/beam ! Clean residual mean=-0.000005 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.127543 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 54 components and 0.127543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100335Jy sigma=0.460889 ! Fit after self-cal, rms=0.100332Jy sigma=0.460888 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=7.545 mas, bpa=-3.56 degrees ! Estimated noise=2.13529 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.839 x 7.545 at -3.56 degrees (North through East) ! Clean map min=-0.003974 max=0.11575 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.277 mas, bmaj=6.421 mas, bpa=-2.895 degrees ! Estimated noise=3.15681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869739 Jy ! Component: 100 - total flux cleaned = 0.106958 Jy ! Component: 150 - total flux cleaned = 0.115277 Jy ! Component: 200 - total flux cleaned = 0.119915 Jy ! Total flux subtracted in 200 components = 0.119915 Jy ! Clean residual min=-0.006585 max=0.005584 Jy/beam ! Clean residual mean=0.000001 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.119915 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.119915 Jy ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=7.545 mas, bpa=-3.56 degrees ! Estimated noise=2.13529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468093 Jy ! Component: 100 - total flux cleaned = 0.00671905 Jy ! Component: 150 - total flux cleaned = 0.0074978 Jy ! Component: 200 - total flux cleaned = 0.00756052 Jy ! Total flux subtracted in 200 components = 0.00756052 Jy ! Clean residual min=-0.004231 max=0.003590 Jy/beam ! Clean residual mean=-0.000002 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.127475 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.127475 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.091 mas, bmaj=23.55 mas, bpa=-1.224 degrees ! Estimated noise=2.72729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153413 Jy ! Component: 100 - total flux cleaned = 0.000153575 Jy ! Component: 150 - total flux cleaned = 0.000138545 Jy ! Component: 200 - total flux cleaned = 0.000138103 Jy ! Total flux subtracted in 200 components = 0.000138103 Jy ! Clean residual min=-0.004428 max=0.003853 Jy/beam ! Clean residual mean=-0.000005 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.127613 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26393e-05 Jy ! Component: 100 - total flux cleaned = -2.4411e-05 Jy ! Component: 150 - total flux cleaned = -3.48149e-05 Jy ! Component: 200 - total flux cleaned = -3.57061e-05 Jy ! Total flux subtracted in 200 components = -3.57061e-05 Jy ! Clean residual min=-0.004421 max=0.003823 Jy/beam ! Clean residual mean=-0.000005 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 0.127578 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.127578 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=7.545 mas, bpa=-3.56 degrees ! Estimated noise=2.13529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125886 Jy ! Component: 100 - total flux cleaned = 0.000145198 Jy ! Component: 150 - total flux cleaned = 0.000182465 Jy ! Component: 200 - total flux cleaned = 0.000199692 Jy ! Total flux subtracted in 200 components = 0.000199692 Jy ! Clean residual min=-0.004157 max=0.003588 Jy/beam ! Clean residual mean=-0.000002 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.127777 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.127777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100341Jy sigma=0.460922 ! Fit after self-cal, rms=0.100334Jy sigma=0.460912 wmodel J0144-3938_S_map.mod ! Writing 60 model components to file: J0144-3938_S_map.mod wobs J0144-3938_S_uvs.fits ! Writing UV FITS file: J0144-3938_S_uvs.fits wwins J0144-3938_S_map.win ! wwins: Wrote 1 windows to J0144-3938_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110188 Jy ! Component: 100 - total flux cleaned = -0.000928137 Jy ! Component: 150 - total flux cleaned = -0.000445331 Jy ! Component: 200 - total flux cleaned = -0.000147858 Jy ! Component: 250 - total flux cleaned = 0.000181144 Jy ! Component: 300 - total flux cleaned = 0.000452275 Jy ! Component: 350 - total flux cleaned = 0.000668128 Jy ! Component: 400 - total flux cleaned = 0.000834376 Jy ! Component: 450 - total flux cleaned = 0.000954526 Jy ! Component: 500 - total flux cleaned = 0.00110918 Jy ! Component: 550 - total flux cleaned = 0.00107337 Jy ! Component: 600 - total flux cleaned = 0.00121938 Jy ! Component: 650 - total flux cleaned = 0.00114805 Jy ! Component: 700 - total flux cleaned = 0.00101177 Jy ! Component: 750 - total flux cleaned = 0.00111302 Jy ! Component: 800 - total flux cleaned = 0.00104862 Jy ! Component: 850 - total flux cleaned = 0.00104868 Jy ! Component: 900 - total flux cleaned = 0.00101693 Jy ! Component: 950 - total flux cleaned = 0.000986138 Jy ! Component: 1000 - total flux cleaned = 0.000866651 Jy ! Component: 1050 - total flux cleaned = 0.000750758 Jy ! Component: 1100 - total flux cleaned = 0.00075067 Jy ! Component: 1150 - total flux cleaned = 0.000750764 Jy ! Component: 1200 - total flux cleaned = 0.000669031 Jy ! Component: 1250 - total flux cleaned = 0.000696328 Jy ! Component: 1300 - total flux cleaned = 0.00059076 Jy ! Component: 1350 - total flux cleaned = 0.000436199 Jy ! Component: 1400 - total flux cleaned = 0.000411216 Jy ! Component: 1450 - total flux cleaned = 0.000235817 Jy ! Component: 1500 - total flux cleaned = 6.30113e-05 Jy ! Component: 1550 - total flux cleaned = 1.49444e-05 Jy ! Component: 1600 - total flux cleaned = -5.71389e-05 Jy ! Component: 1650 - total flux cleaned = -0.000198588 Jy ! Component: 1700 - total flux cleaned = -0.000245413 Jy ! Component: 1750 - total flux cleaned = -0.000222401 Jy ! Component: 1800 - total flux cleaned = -0.000268087 Jy ! Component: 1850 - total flux cleaned = -0.000267949 Jy ! Component: 1900 - total flux cleaned = -0.000312747 Jy ! Component: 1950 - total flux cleaned = -0.000334886 Jy ! Component: 2000 - total flux cleaned = -0.000356784 Jy ! Component: 2050 - total flux cleaned = -0.000378546 Jy ! Component: 2100 - total flux cleaned = -0.000400148 Jy ! Component: 2150 - total flux cleaned = -0.00044275 Jy ! Component: 2200 - total flux cleaned = -0.000505829 Jy ! Component: 2250 - total flux cleaned = -0.000526468 Jy ! Component: 2300 - total flux cleaned = -0.000547048 Jy ! Component: 2350 - total flux cleaned = -0.000526492 Jy ! Component: 2400 - total flux cleaned = -0.00054698 Jy ! Component: 2450 - total flux cleaned = -0.000587425 Jy ! Component: 2500 - total flux cleaned = -0.000587481 Jy ! Component: 2550 - total flux cleaned = -0.000547621 Jy ! Component: 2600 - total flux cleaned = -0.000507961 Jy ! Component: 2650 - total flux cleaned = -0.000566961 Jy ! Component: 2700 - total flux cleaned = -0.000507999 Jy ! Component: 2750 - total flux cleaned = -0.000527516 Jy ! Component: 2800 - total flux cleaned = -0.000488602 Jy ! Component: 2850 - total flux cleaned = -0.000449808 Jy ! Component: 2900 - total flux cleaned = -0.000449851 Jy ! Component: 2950 - total flux cleaned = -0.000411702 Jy ! Component: 3000 - total flux cleaned = -0.00037346 Jy ! Component: 3050 - total flux cleaned = -0.000354663 Jy ! Component: 3100 - total flux cleaned = -0.000335854 Jy ! Component: 3150 - total flux cleaned = -0.000279491 Jy ! Component: 3200 - total flux cleaned = -0.000316969 Jy ! Component: 3250 - total flux cleaned = -0.00024233 Jy ! Component: 3300 - total flux cleaned = -0.000168094 Jy ! Component: 3350 - total flux cleaned = -0.000205119 Jy ! Component: 3400 - total flux cleaned = -0.000131234 Jy ! Component: 3450 - total flux cleaned = -0.000149609 Jy ! Component: 3500 - total flux cleaned = -0.000149604 Jy ! Component: 3550 - total flux cleaned = -0.00013126 Jy ! Component: 3600 - total flux cleaned = -0.000186028 Jy ! Component: 3650 - total flux cleaned = -0.000167787 Jy ! Component: 3700 - total flux cleaned = -0.000131531 Jy ! Component: 3750 - total flux cleaned = -9.53589e-05 Jy ! Component: 3800 - total flux cleaned = -4.11978e-05 Jy ! Component: 3850 - total flux cleaned = -4.12195e-05 Jy ! Component: 3900 - total flux cleaned = -4.12308e-05 Jy ! Component: 3950 - total flux cleaned = -2.32729e-05 Jy ! Component: 4000 - total flux cleaned = -5.9142e-05 Jy ! Component: 4050 - total flux cleaned = -5.90647e-05 Jy ! Total flux subtracted in 4096 components = -4.11312e-05 Jy ! Clean residual min=-0.001133 max=0.001031 Jy/beam ! Clean residual mean=-0.000001 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.127736 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 298 components and 0.127736 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0144-3938_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.839 x 7.545 at -3.56 degrees (North through East) ! Clean map min=-0.0026014 max=0.11533 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0144-3938_S_map.fits wmodel /image_prod/ug002_uva//J0144-3938_S_map.mod ! Writing 298 model components to file: /image_prod/ug002_uva//J0144-3938_S_map.mod wobs /image_prod/ug002_uva//J0144-3938_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0144-3938_S_uvs.fits wwins /image_prod/ug002_uva//J0144-3938_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0144-3938_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.11533 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000285499 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.742652 0.742652 1.4853 2.97061 5.94122 11.8824 23.7649 47.5297 95.0595 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.115 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 403.957 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0144-3938_S_dfm.log closed on Wed Mar 4 19:13:05 2020