! Started logfile: /image_prod/ug002_uva//J0141-0928_X_i_dfm.log on Wed Mar 4 19:11:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0141-0928_X_i_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0141-0928_X_i_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.640741 visibilities/baseline/integration-bin. ! Found source: J0141-0928 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 4152 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0141-0928_X_i] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.159194Jy sigma=8.788982 ! Fit after self-cal, rms=0.469458Jy sigma=3.748699 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5897 mas, bmaj=1.605 mas, bpa=-2.781 degrees ! Estimated noise=1.91763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.40082 Jy ! Component: 100 - total flux cleaned = 0.547829 Jy ! Total flux subtracted in 100 components = 0.547829 Jy ! Clean residual min=-0.033044 max=0.069164 Jy/beam ! Clean residual mean=-0.000014 rms=0.007127 Jy/beam ! Combined flux in latest and established models = 0.547828 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.547828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154248Jy sigma=1.106140 ! Fit after self-cal, rms=0.154156Jy sigma=1.105673 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785506 Jy ! Component: 100 - total flux cleaned = 0.123452 Jy ! Total flux subtracted in 100 components = 0.123452 Jy ! Clean residual min=-0.021459 max=0.030755 Jy/beam ! Clean residual mean=-0.000009 rms=0.004070 Jy/beam ! Combined flux in latest and established models = 0.67128 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.67128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098574Jy sigma=0.713634 ! Fit after self-cal, rms=0.098517Jy sigma=0.713393 ! Inverting map ! Added new window around map position (-1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314866 Jy ! Component: 100 - total flux cleaned = 0.0411145 Jy ! Total flux subtracted in 100 components = 0.0411145 Jy ! Clean residual min=-0.017116 max=0.024467 Jy/beam ! Clean residual mean=-0.000006 rms=0.003260 Jy/beam ! Combined flux in latest and established models = 0.712395 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.712394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086043Jy sigma=0.625600 ! Fit after self-cal, rms=0.085634Jy sigma=0.622275 ! Inverting map ! Added new window around map position (-2.2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235876 Jy ! Component: 100 - total flux cleaned = 0.0287975 Jy ! Total flux subtracted in 100 components = 0.0287975 Jy ! Clean residual min=-0.013070 max=0.019294 Jy/beam ! Clean residual mean=-0.000005 rms=0.002683 Jy/beam ! Combined flux in latest and established models = 0.741192 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.741192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078471Jy sigma=0.571961 ! Fit after self-cal, rms=0.077902Jy sigma=0.567422 ! Inverting map ! Added new window around map position (2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171074 Jy ! Component: 100 - total flux cleaned = 0.0237381 Jy ! Total flux subtracted in 100 components = 0.0237381 Jy ! Clean residual min=-0.011048 max=0.012678 Jy/beam ! Clean residual mean=-0.000004 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 0.76493 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.76493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073500Jy sigma=0.537172 ! Fit after self-cal, rms=0.073398Jy sigma=0.536473 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7122 mas, bmaj=1.832 mas, bpa=-3.275 degrees ! Estimated noise=1.48715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410998 Jy ! Component: 100 - total flux cleaned = 0.00463688 Jy ! Component: 150 - total flux cleaned = 0.00531675 Jy ! Component: 200 - total flux cleaned = 0.00533057 Jy ! Total flux subtracted in 200 components = 0.00533057 Jy ! Clean residual min=-0.010911 max=0.011689 Jy/beam ! Clean residual mean=-0.000003 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.770261 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.770261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071412Jy sigma=0.522947 ! Fit after self-cal, rms=0.071338Jy sigma=0.522478 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7122 x 1.832 at -3.275 degrees (North through East) ! Clean map min=-0.010358 max=0.53324 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.01 KP 1.04 ! LA 1.08 MK 1.00 NL 1.05 OV 0.95 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.98 KP 1.04 ! LA 1.05 MK 1.00 NL 1.05 OV 0.93 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.96 KP 1.03 ! LA 1.09 MK 0.98 NL 1.04 OV 0.94 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.98 KP 1.05 ! LA 1.04 MK 1.02 NL 1.04 OV 0.97 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.97 KP 1.05 ! LA 1.05 MK 0.99 NL 1.03 OV 0.94 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.02 KP 1.06 ! LA 1.07 MK 0.98 NL 1.02 OV 0.96 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.98 KP 1.05 ! LA 1.08 MK 1.00 NL 1.03 OV 0.96 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.02 KP 1.06 ! LA 1.06 MK 0.99 NL 1.03 OV 0.94 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.98 KP 1.04 ! LA 1.06 MK 1.02 NL 1.05 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.01 KP 1.03 ! LA 1.08 MK 0.99 NL 1.02 OV 0.95 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.98 KP 1.06 ! LA 1.06 MK 0.96 NL 1.01 OV 0.96 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.00 KP 1.04 ! LA 1.06 MK 1.00 NL 1.03 OV 0.95 ! PT 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.071338Jy sigma=0.522478 ! Fit after self-cal, rms=0.063729Jy sigma=0.467861 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7095 mas, bmaj=1.828 mas, bpa=-3.138 degrees ! Estimated noise=1.48557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00478841 Jy ! Component: 100 - total flux cleaned = -0.00605528 Jy ! Component: 150 - total flux cleaned = -0.00695198 Jy ! Component: 200 - total flux cleaned = -0.00762653 Jy ! Total flux subtracted in 200 components = -0.00762653 Jy ! Clean residual min=-0.007390 max=0.006131 Jy/beam ! Clean residual mean=-0.000005 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.762634 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.762634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062782Jy sigma=0.459794 ! Fit after self-cal, rms=0.062753Jy sigma=0.459605 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062753Jy sigma=0.459605 ! Fit after self-cal, rms=0.060583Jy sigma=0.444307 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7084 mas, bmaj=1.828 mas, bpa=-3.127 degrees ! Estimated noise=1.4838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00094664 Jy ! Component: 100 - total flux cleaned = -0.000152176 Jy ! Component: 150 - total flux cleaned = -3.29812e-05 Jy ! Component: 200 - total flux cleaned = -0.000131982 Jy ! Total flux subtracted in 200 components = -0.000131982 Jy ! Clean residual min=-0.006011 max=0.005057 Jy/beam ! Clean residual mean=-0.000003 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.762502 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.762502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060087Jy sigma=0.440349 ! Fit after self-cal, rms=0.060064Jy sigma=0.440236 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326213 Jy ! Component: 100 - total flux cleaned = -0.00032271 Jy ! Component: 150 - total flux cleaned = -0.000399401 Jy ! Component: 200 - total flux cleaned = -0.000469951 Jy ! Total flux subtracted in 200 components = -0.000469951 Jy ! Clean residual min=-0.005718 max=0.004987 Jy/beam ! Clean residual mean=-0.000003 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.762032 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.762032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059871Jy sigma=0.438803 ! Fit after self-cal, rms=0.059863Jy sigma=0.438770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059863Jy sigma=0.438770 ! Fit after self-cal, rms=0.059716Jy sigma=0.438049 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7078 mas, bmaj=1.826 mas, bpa=-3.056 degrees ! Estimated noise=1.48448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181886 Jy ! Component: 100 - total flux cleaned = -0.00206928 Jy ! Component: 150 - total flux cleaned = -0.00227628 Jy ! Component: 200 - total flux cleaned = -0.00234055 Jy ! Total flux subtracted in 200 components = -0.00234055 Jy ! Clean residual min=-0.005303 max=0.004614 Jy/beam ! Clean residual mean=-0.000002 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.759692 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.759692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059503Jy sigma=0.436363 ! Fit after self-cal, rms=0.059500Jy sigma=0.436345 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136662 Jy ! Component: 100 - total flux cleaned = -0.000137503 Jy ! Component: 150 - total flux cleaned = -0.000136953 Jy ! Component: 200 - total flux cleaned = -0.000182816 Jy ! Total flux subtracted in 200 components = -0.000182816 Jy ! Clean residual min=-0.005101 max=0.004547 Jy/beam ! Clean residual mean=-0.000002 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.759509 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.759509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059424Jy sigma=0.435784 ! Fit after self-cal, rms=0.059423Jy sigma=0.435775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059423Jy sigma=0.435775 ! Fit after self-cal, rms=0.059279Jy sigma=0.435199 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.937 mas, bmaj=3.453 mas, bpa=-1.103 degrees ! Estimated noise=2.24149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234245 Jy ! Component: 100 - total flux cleaned = -0.00252443 Jy ! Component: 150 - total flux cleaned = -0.00240047 Jy ! Component: 200 - total flux cleaned = -0.0022384 Jy ! Total flux subtracted in 200 components = -0.0022384 Jy ! Clean residual min=-0.006600 max=0.004923 Jy/beam ! Clean residual mean=-0.000003 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.757271 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.757271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059225Jy sigma=0.434821 ! Fit after self-cal, rms=0.059222Jy sigma=0.434758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.68622e-05 Jy ! Component: 100 - total flux cleaned = 9.07364e-05 Jy ! Component: 150 - total flux cleaned = 0.000214873 Jy ! Component: 200 - total flux cleaned = 0.000289575 Jy ! Total flux subtracted in 200 components = 0.000289575 Jy ! Clean residual min=-0.006421 max=0.004984 Jy/beam ! Clean residual mean=-0.000003 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.75756 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 0.75756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059213Jy sigma=0.434831 ! Fit after self-cal, rms=0.059209Jy sigma=0.434787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7072 mas, bmaj=1.825 mas, bpa=-2.992 degrees ! Estimated noise=1.48485 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7072 x 1.825 at -2.992 degrees (North through East) ! Clean map min=-0.0042304 max=0.53732 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059209Jy sigma=0.434787 ! Fit after self-cal, rms=0.055352Jy sigma=0.403324 ! Inverting map and beam ! Estimated beam: bmin=0.708 mas, bmaj=1.825 mas, bpa=-2.917 degrees ! Estimated noise=1.48599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00186849 Jy ! Component: 100 - total flux cleaned = -0.00187126 Jy ! Component: 150 - total flux cleaned = -0.00181663 Jy ! Component: 200 - total flux cleaned = -0.00190416 Jy ! Total flux subtracted in 200 components = -0.00190416 Jy ! Clean residual min=-0.004484 max=0.003823 Jy/beam ! Clean residual mean=-0.000002 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.755656 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.755656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055198Jy sigma=0.402143 ! Fit after self-cal, rms=0.055194Jy sigma=0.402133 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.71848e-05 Jy ! Component: 100 - total flux cleaned = -0.000165768 Jy ! Component: 150 - total flux cleaned = -0.000201932 Jy ! Component: 200 - total flux cleaned = -0.000236683 Jy ! Total flux subtracted in 200 components = -0.000236683 Jy ! Clean residual min=-0.004309 max=0.003796 Jy/beam ! Clean residual mean=-0.000002 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.755419 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.755419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055145Jy sigma=0.401790 ! Fit after self-cal, rms=0.055144Jy sigma=0.401783 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055144Jy sigma=0.401783 ! Fit after self-cal, rms=0.055115Jy sigma=0.401208 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5869 mas, bmaj=1.601 mas, bpa=-2.38 degrees ! Estimated noise=1.90113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.397262 Jy ! Component: 100 - total flux cleaned = 0.544398 Jy ! Component: 150 - total flux cleaned = 0.62466 Jy ! Component: 200 - total flux cleaned = 0.671191 Jy ! Total flux subtracted in 200 components = 0.671191 Jy ! Clean residual min=-0.019436 max=0.023486 Jy/beam ! Clean residual mean=-0.000005 rms=0.003206 Jy/beam ! Combined flux in latest and established models = 0.671191 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.671191 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=1.823 mas, bpa=-2.866 degrees ! Estimated noise=1.48485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335493 Jy ! Component: 100 - total flux cleaned = 0.054707 Jy ! Component: 150 - total flux cleaned = 0.0672303 Jy ! Component: 200 - total flux cleaned = 0.0713705 Jy ! Total flux subtracted in 200 components = 0.0713705 Jy ! Clean residual min=-0.007331 max=0.009441 Jy/beam ! Clean residual mean=-0.000003 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.742561 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.742561 Jy ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399935 Jy ! Component: 100 - total flux cleaned = 0.00527702 Jy ! Component: 150 - total flux cleaned = 0.00664229 Jy ! Component: 200 - total flux cleaned = 0.00802621 Jy ! Total flux subtracted in 200 components = 0.00802621 Jy ! Clean residual min=-0.004737 max=0.004795 Jy/beam ! Clean residual mean=-0.000002 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.750587 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.750588 Jy ! Inverting map ! Added new window around map position (-3, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020542 Jy ! Component: 100 - total flux cleaned = 0.00291339 Jy ! Component: 150 - total flux cleaned = 0.00394224 Jy ! Component: 200 - total flux cleaned = 0.00470334 Jy ! Total flux subtracted in 200 components = 0.00470334 Jy ! Clean residual min=-0.004032 max=0.003835 Jy/beam ! Clean residual mean=-0.000001 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.755291 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.755291 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.94 mas, bmaj=3.45 mas, bpa=-0.9998 degrees ! Estimated noise=2.242 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00342862 Jy ! Component: 100 - total flux cleaned = -0.00351492 Jy ! Component: 150 - total flux cleaned = -0.00356633 Jy ! Component: 200 - total flux cleaned = -0.00371192 Jy ! Total flux subtracted in 200 components = -0.00371192 Jy ! Clean residual min=-0.005532 max=0.004699 Jy/beam ! Clean residual mean=-0.000002 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.751579 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205828 Jy ! Component: 100 - total flux cleaned = -0.00038322 Jy ! Component: 150 - total flux cleaned = -0.000447297 Jy ! Component: 200 - total flux cleaned = -0.000534661 Jy ! Total flux subtracted in 200 components = -0.000534661 Jy ! Clean residual min=-0.005320 max=0.004673 Jy/beam ! Clean residual mean=-0.000002 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.751044 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.751044 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7071 mas, bmaj=1.823 mas, bpa=-2.866 degrees ! Estimated noise=1.48485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000855567 Jy ! Component: 100 - total flux cleaned = 0.000858268 Jy ! Component: 150 - total flux cleaned = 0.000758001 Jy ! Component: 200 - total flux cleaned = 0.000756308 Jy ! Total flux subtracted in 200 components = 0.000756308 Jy ! Clean residual min=-0.003780 max=0.003690 Jy/beam ! Clean residual mean=-0.000001 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.751801 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.751801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055203Jy sigma=0.401684 ! Fit after self-cal, rms=0.055187Jy sigma=0.401500 wmodel J0141-0928_X_i_map.mod ! Writing 78 model components to file: J0141-0928_X_i_map.mod wobs J0141-0928_X_i_uvs.fits ! Writing UV FITS file: J0141-0928_X_i_uvs.fits wwins J0141-0928_X_i_map.win ! wwins: Wrote 6 windows to J0141-0928_X_i_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570179 Jy ! Component: 100 - total flux cleaned = -0.000637424 Jy ! Component: 150 - total flux cleaned = -0.000454593 Jy ! Component: 200 - total flux cleaned = -0.000336731 Jy ! Component: 250 - total flux cleaned = -0.000222595 Jy ! Component: 300 - total flux cleaned = -5.75755e-05 Jy ! Component: 350 - total flux cleaned = 4.87665e-05 Jy ! Component: 400 - total flux cleaned = 0.000253583 Jy ! Component: 450 - total flux cleaned = 0.000354409 Jy ! Component: 500 - total flux cleaned = 0.000646694 Jy ! Component: 550 - total flux cleaned = 0.000835453 Jy ! Component: 600 - total flux cleaned = 0.000973092 Jy ! Component: 650 - total flux cleaned = 0.00115256 Jy ! Component: 700 - total flux cleaned = 0.00115196 Jy ! Component: 750 - total flux cleaned = 0.00123824 Jy ! Component: 800 - total flux cleaned = 0.00128117 Jy ! Component: 850 - total flux cleaned = 0.00140509 Jy ! Component: 900 - total flux cleaned = 0.00140458 Jy ! Component: 950 - total flux cleaned = 0.00156429 Jy ! Component: 1000 - total flux cleaned = 0.00160463 Jy ! Component: 1050 - total flux cleaned = 0.00179773 Jy ! Component: 1100 - total flux cleaned = 0.00187309 Jy ! Component: 1150 - total flux cleaned = 0.00205961 Jy ! Component: 1200 - total flux cleaned = 0.00205892 Jy ! Component: 1250 - total flux cleaned = 0.00209475 Jy ! Component: 1300 - total flux cleaned = 0.00216539 Jy ! Component: 1350 - total flux cleaned = 0.00216561 Jy ! Component: 1400 - total flux cleaned = 0.00223406 Jy ! Component: 1450 - total flux cleaned = 0.00230168 Jy ! Component: 1500 - total flux cleaned = 0.00240079 Jy ! Component: 1550 - total flux cleaned = 0.00253129 Jy ! Component: 1600 - total flux cleaned = 0.0026929 Jy ! Component: 1650 - total flux cleaned = 0.00266073 Jy ! Component: 1700 - total flux cleaned = 0.0028806 Jy ! Component: 1750 - total flux cleaned = 0.00291191 Jy ! Component: 1800 - total flux cleaned = 0.00309548 Jy ! Component: 1850 - total flux cleaned = 0.00312569 Jy ! Component: 1900 - total flux cleaned = 0.00336472 Jy ! Component: 1950 - total flux cleaned = 0.00327644 Jy ! Component: 2000 - total flux cleaned = 0.00345242 Jy ! Component: 2050 - total flux cleaned = 0.00353894 Jy ! Component: 2100 - total flux cleaned = 0.00365317 Jy ! Component: 2150 - total flux cleaned = 0.00379452 Jy ! Component: 2200 - total flux cleaned = 0.00396161 Jy ! Component: 2250 - total flux cleaned = 0.00409886 Jy ! Component: 2300 - total flux cleaned = 0.00418042 Jy ! Component: 2350 - total flux cleaned = 0.00415352 Jy ! Component: 2400 - total flux cleaned = 0.00439376 Jy ! Component: 2450 - total flux cleaned = 0.00439375 Jy ! Component: 2500 - total flux cleaned = 0.00452473 Jy ! Component: 2550 - total flux cleaned = 0.00465422 Jy ! Component: 2600 - total flux cleaned = 0.00465398 Jy ! Component: 2650 - total flux cleaned = 0.00478119 Jy ! Component: 2700 - total flux cleaned = 0.00493148 Jy ! Component: 2750 - total flux cleaned = 0.00495627 Jy ! Component: 2800 - total flux cleaned = 0.00507928 Jy ! Component: 2850 - total flux cleaned = 0.00507938 Jy ! Component: 2900 - total flux cleaned = 0.00510358 Jy ! Component: 2950 - total flux cleaned = 0.00517589 Jy ! Component: 3000 - total flux cleaned = 0.00529451 Jy ! Component: 3050 - total flux cleaned = 0.00529431 Jy ! Component: 3100 - total flux cleaned = 0.00527102 Jy ! Component: 3150 - total flux cleaned = 0.00531717 Jy ! Component: 3200 - total flux cleaned = 0.00534004 Jy ! Component: 3250 - total flux cleaned = 0.00534042 Jy ! Component: 3300 - total flux cleaned = 0.00543064 Jy ! Component: 3350 - total flux cleaned = 0.00540832 Jy ! Component: 3400 - total flux cleaned = 0.0054524 Jy ! Component: 3450 - total flux cleaned = 0.00540856 Jy ! Component: 3500 - total flux cleaned = 0.00553927 Jy ! Component: 3550 - total flux cleaned = 0.00556086 Jy ! Component: 3600 - total flux cleaned = 0.00564674 Jy ! Component: 3650 - total flux cleaned = 0.00568895 Jy ! Component: 3700 - total flux cleaned = 0.00566776 Jy ! Component: 3750 - total flux cleaned = 0.00570951 Jy ! Component: 3800 - total flux cleaned = 0.0057716 Jy ! Component: 3850 - total flux cleaned = 0.00579211 Jy ! Component: 3900 - total flux cleaned = 0.00577162 Jy ! Component: 3950 - total flux cleaned = 0.00575142 Jy ! Component: 4000 - total flux cleaned = 0.00573151 Jy ! Component: 4050 - total flux cleaned = 0.00571178 Jy ! Total flux subtracted in 4096 components = 0.00573185 Jy ! Clean residual min=-0.001055 max=0.001167 Jy/beam ! Clean residual mean=-0.000000 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.757532 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 400 components and 0.757533 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0141-0928_X_i_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7071 x 1.823 at -2.866 degrees (North through East) ! Clean map min=-0.0029767 max=0.53837 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0141-0928_X_i_map.fits wmodel /image_prod/ug002_uva//J0141-0928_X_i_map.mod ! Writing 400 model components to file: /image_prod/ug002_uva//J0141-0928_X_i_map.mod wobs /image_prod/ug002_uva//J0141-0928_X_i_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0141-0928_X_i_uvs.fits wwins /image_prod/ug002_uva//J0141-0928_X_i_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0141-0928_X_i_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.53837 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000336778 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.187665 0.187665 0.37533 0.75066 1.50132 3.00264 6.00528 12.0106 24.0211 48.0422 96.0845 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.538 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1598.59 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0141-0928_X_i_dfm.log closed on Wed Mar 4 19:11:53 2020