! Started logfile: /image_prod/ug002_uva//J0141-0928_X_h_dfm.log on Wed Mar 4 19:11:43 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0141-0928_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0141-0928_X_h_uva.fits ! AN table 1: 12 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.752976 visibilities/baseline/integration-bin. ! Found source: J0141-0928 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 3036 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0141-0928_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.123735Jy sigma=8.690687 ! Fit after self-cal, rms=0.483145Jy sigma=3.870686 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5978 mas, bmaj=1.589 mas, bpa=-1.94 degrees ! Estimated noise=2.23371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.382298 Jy ! Component: 100 - total flux cleaned = 0.520192 Jy ! Total flux subtracted in 100 components = 0.520192 Jy ! Clean residual min=-0.031801 max=0.064854 Jy/beam ! Clean residual mean=-0.000018 rms=0.007881 Jy/beam ! Combined flux in latest and established models = 0.520192 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.520192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148924Jy sigma=1.133456 ! Fit after self-cal, rms=0.148761Jy sigma=1.132154 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0736254 Jy ! Component: 100 - total flux cleaned = 0.115258 Jy ! Total flux subtracted in 100 components = 0.115258 Jy ! Clean residual min=-0.020874 max=0.025597 Jy/beam ! Clean residual mean=-0.000014 rms=0.004434 Jy/beam ! Combined flux in latest and established models = 0.63545 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.63545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092845Jy sigma=0.703321 ! Fit after self-cal, rms=0.092807Jy sigma=0.703059 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7228 mas, bmaj=1.751 mas, bpa=-0.8368 degrees ! Estimated noise=1.69646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309736 Jy ! Component: 100 - total flux cleaned = 0.046547 Jy ! Component: 150 - total flux cleaned = 0.0558901 Jy ! Component: 200 - total flux cleaned = 0.0610696 Jy ! Total flux subtracted in 200 components = 0.0610696 Jy ! Clean residual min=-0.017023 max=0.030999 Jy/beam ! Clean residual mean=-0.000017 rms=0.004882 Jy/beam ! Combined flux in latest and established models = 0.696519 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.696519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081833Jy sigma=0.623718 ! Fit after self-cal, rms=0.081827Jy sigma=0.623639 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.027455 Jy ! Component: 100 - total flux cleaned = 0.0401904 Jy ! Component: 150 - total flux cleaned = 0.0431016 Jy ! Component: 200 - total flux cleaned = 0.0456821 Jy ! Total flux subtracted in 200 components = 0.0456821 Jy ! Clean residual min=-0.014208 max=0.020837 Jy/beam ! Clean residual mean=-0.000013 rms=0.003727 Jy/beam ! Combined flux in latest and established models = 0.742201 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.742201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072348Jy sigma=0.543483 ! Fit after self-cal, rms=0.071135Jy sigma=0.534218 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7228 x 1.751 at -0.8368 degrees (North through East) ! Clean map min=-0.014073 max=0.53035 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.97 KP 1.04 ! MK 1.02 NL 1.12 OV 0.91 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00 KP 1.01 ! MK 0.98 NL 1.15 OV 0.92 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.98 KP 1.05 ! MK 0.99 NL 1.10 OV 0.92 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 1.03 ! MK 1.01 NL 1.09 OV 0.93 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.02 KP 1.04 ! MK 0.98 NL 1.08 OV 0.93 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.04 KP 1.03 ! MK 0.98 NL 1.10 OV 0.91 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.02 KP 1.03 ! MK 0.99 NL 1.10 OV 0.93 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.00 KP 1.06 ! MK 0.96 NL 1.08 OV 0.94 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 KP 1.03 ! MK 1.00 NL 1.11 OV 0.90 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.95 KP 1.03 ! MK 1.00 NL 1.15 OV 0.90 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.01 KP 1.02 ! MK 0.99 NL 1.11 OV 0.94 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.05 KP 0.99 ! MK 1.13 NL 1.12 OV 0.93 SC 1.00 ! ! ! Fit before self-cal, rms=0.071135Jy sigma=0.534218 ! Fit after self-cal, rms=0.056962Jy sigma=0.422310 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7243 mas, bmaj=1.751 mas, bpa=-0.5573 degrees ! Estimated noise=1.70358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0061383 Jy ! Component: 100 - total flux cleaned = -0.00774625 Jy ! Component: 150 - total flux cleaned = -0.00866128 Jy ! Component: 200 - total flux cleaned = -0.00874938 Jy ! Total flux subtracted in 200 components = -0.00874938 Jy ! Clean residual min=-0.005025 max=0.005585 Jy/beam ! Clean residual mean=-0.000002 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.733452 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 59 components and 0.733452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055860Jy sigma=0.414445 ! Fit after self-cal, rms=0.055803Jy sigma=0.413840 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055803Jy sigma=0.413840 ! Fit after self-cal, rms=0.054437Jy sigma=0.401803 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7224 mas, bmaj=1.754 mas, bpa=-0.5332 degrees ! Estimated noise=1.69851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00304679 Jy ! Component: 100 - total flux cleaned = -0.00375363 Jy ! Component: 150 - total flux cleaned = -0.0039233 Jy ! Component: 200 - total flux cleaned = -0.0037908 Jy ! Total flux subtracted in 200 components = -0.0037908 Jy ! Clean residual min=-0.004045 max=0.003643 Jy/beam ! Clean residual mean=-0.000001 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.729661 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.729661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054027Jy sigma=0.398927 ! Fit after self-cal, rms=0.053997Jy sigma=0.398716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547758 Jy ! Component: 100 - total flux cleaned = -0.000265209 Jy ! Component: 150 - total flux cleaned = -0.000115876 Jy ! Component: 200 - total flux cleaned = 1.45184e-05 Jy ! Total flux subtracted in 200 components = 1.45184e-05 Jy ! Clean residual min=-0.003823 max=0.003651 Jy/beam ! Clean residual mean=-0.000001 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.729676 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.729676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053889Jy sigma=0.398018 ! Fit after self-cal, rms=0.053881Jy sigma=0.397986 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053881Jy sigma=0.397986 ! Fit after self-cal, rms=0.053755Jy sigma=0.397010 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7224 mas, bmaj=1.754 mas, bpa=-0.4849 degrees ! Estimated noise=1.69808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195749 Jy ! Component: 100 - total flux cleaned = -0.0023687 Jy ! Component: 150 - total flux cleaned = -0.00232293 Jy ! Component: 200 - total flux cleaned = -0.00220292 Jy ! Total flux subtracted in 200 components = -0.00220292 Jy ! Clean residual min=-0.003214 max=0.002969 Jy/beam ! Clean residual mean=-0.000001 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.727473 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.727473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053609Jy sigma=0.396041 ! Fit after self-cal, rms=0.053601Jy sigma=0.395965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000327718 Jy ! Component: 100 - total flux cleaned = -0.000223158 Jy ! Component: 150 - total flux cleaned = -0.000160053 Jy ! Component: 200 - total flux cleaned = -0.000158516 Jy ! Total flux subtracted in 200 components = -0.000158516 Jy ! Clean residual min=-0.003060 max=0.002928 Jy/beam ! Clean residual mean=-0.000001 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.727314 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.727314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053557Jy sigma=0.395719 ! Fit after self-cal, rms=0.053555Jy sigma=0.395708 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053555Jy sigma=0.395708 ! Fit after self-cal, rms=0.053517Jy sigma=0.395347 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.87 mas, bmaj=3.072 mas, bpa=2.683 degrees ! Estimated noise=2.46319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231003 Jy ! Component: 100 - total flux cleaned = -5.20416e-05 Jy ! Component: 150 - total flux cleaned = 8.18648e-05 Jy ! Component: 200 - total flux cleaned = 0.000201476 Jy ! Total flux subtracted in 200 components = 0.000201476 Jy ! Clean residual min=-0.003404 max=0.003447 Jy/beam ! Clean residual mean=-0.000000 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.727516 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.727516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053480Jy sigma=0.395134 ! Fit after self-cal, rms=0.053479Jy sigma=0.395103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302813 Jy ! Component: 100 - total flux cleaned = 0.00032418 Jy ! Component: 150 - total flux cleaned = 0.00038347 Jy ! Component: 200 - total flux cleaned = 0.000456517 Jy ! Total flux subtracted in 200 components = 0.000456517 Jy ! Clean residual min=-0.003356 max=0.003463 Jy/beam ! Clean residual mean=-0.000000 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.727972 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.727972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053471Jy sigma=0.395101 ! Fit after self-cal, rms=0.053471Jy sigma=0.395094 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7224 mas, bmaj=1.755 mas, bpa=-0.4542 degrees ! Estimated noise=1.6981 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7224 x 1.755 at -0.4542 degrees (North through East) ! Clean map min=-0.0025892 max=0.53101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053471Jy sigma=0.395094 ! Fit after self-cal, rms=0.049924Jy sigma=0.364379 ! Inverting map and beam ! Estimated beam: bmin=0.7224 mas, bmaj=1.755 mas, bpa=-0.4432 degrees ! Estimated noise=1.69807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000940263 Jy ! Component: 100 - total flux cleaned = -0.00128778 Jy ! Component: 150 - total flux cleaned = -0.00141759 Jy ! Component: 200 - total flux cleaned = -0.00133015 Jy ! Total flux subtracted in 200 components = -0.00133015 Jy ! Clean residual min=-0.002736 max=0.002688 Jy/beam ! Clean residual mean=-0.000000 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.726642 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.726642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049860Jy sigma=0.364009 ! Fit after self-cal, rms=0.049859Jy sigma=0.363989 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.04177e-05 Jy ! Component: 100 - total flux cleaned = 3.73223e-05 Jy ! Component: 150 - total flux cleaned = 0.000104531 Jy ! Component: 200 - total flux cleaned = 0.000208572 Jy ! Total flux subtracted in 200 components = 0.000208572 Jy ! Clean residual min=-0.002694 max=0.002687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.726851 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 108 components and 0.726851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049835Jy sigma=0.363863 ! Fit after self-cal, rms=0.049834Jy sigma=0.363859 ! Inverting map ! Added new window around map position (44.4, -48.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176025 Jy ! Component: 100 - total flux cleaned = 0.00196977 Jy ! Component: 150 - total flux cleaned = 0.00201752 Jy ! Component: 200 - total flux cleaned = 0.00197115 Jy ! Total flux subtracted in 200 components = 0.00197115 Jy ! Clean residual min=-0.002501 max=0.002558 Jy/beam ! Clean residual mean=-0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.728822 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.728822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049651Jy sigma=0.362638 ! Fit after self-cal, rms=0.049646Jy sigma=0.362574 ! Inverting map ! Added new window around map position (-37.4, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231773 Jy ! Component: 100 - total flux cleaned = 0.00324558 Jy ! Component: 150 - total flux cleaned = 0.00379302 Jy ! Component: 200 - total flux cleaned = 0.00424218 Jy ! Total flux subtracted in 200 components = 0.00424218 Jy ! Clean residual min=-0.002514 max=0.002497 Jy/beam ! Clean residual mean=-0.000000 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.733064 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 140 components and 0.733064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049505Jy sigma=0.361559 ! Fit after self-cal, rms=0.049498Jy sigma=0.361479 ! Inverting map ! Added new window around map position (6.6, 24.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127164 Jy ! Component: 100 - total flux cleaned = 0.0018466 Jy ! Component: 150 - total flux cleaned = 0.00224548 Jy ! Component: 200 - total flux cleaned = 0.00248229 Jy ! Total flux subtracted in 200 components = 0.00248229 Jy ! Clean residual min=-0.002144 max=0.002194 Jy/beam ! Clean residual mean=-0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.735547 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 159 components and 0.735546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049361Jy sigma=0.360408 ! Fit after self-cal, rms=0.049361Jy sigma=0.360333 ! Inverting map ! Added new window around map position (-46.6, -31.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196748 Jy ! Component: 100 - total flux cleaned = 0.00278873 Jy ! Component: 150 - total flux cleaned = 0.00332724 Jy ! Component: 200 - total flux cleaned = 0.00363249 Jy ! Total flux subtracted in 200 components = 0.00363249 Jy ! Clean residual min=-0.002124 max=0.001931 Jy/beam ! Clean residual mean=-0.000000 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.739179 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 177 components and 0.739179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049256Jy sigma=0.359523 ! Fit after self-cal, rms=0.049255Jy sigma=0.359503 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049255Jy sigma=0.359503 ! Fit after self-cal, rms=0.049217Jy sigma=0.359234 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5975 mas, bmaj=1.593 mas, bpa=-1.351 degrees ! Estimated noise=2.24429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.383226 Jy ! Component: 100 - total flux cleaned = 0.521991 Jy ! Component: 150 - total flux cleaned = 0.596856 Jy ! Component: 200 - total flux cleaned = 0.639445 Jy ! Total flux subtracted in 200 components = 0.639445 Jy ! Clean residual min=-0.011304 max=0.020961 Jy/beam ! Clean residual mean=-0.000004 rms=0.002698 Jy/beam ! Combined flux in latest and established models = 0.639445 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.639445 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7227 mas, bmaj=1.755 mas, bpa=-0.4171 degrees ! Estimated noise=1.69765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293806 Jy ! Component: 100 - total flux cleaned = 0.0458127 Jy ! Component: 150 - total flux cleaned = 0.0564941 Jy ! Component: 200 - total flux cleaned = 0.0639522 Jy ! Total flux subtracted in 200 components = 0.0639522 Jy ! Clean residual min=-0.004111 max=0.004745 Jy/beam ! Clean residual mean=-0.000001 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.703398 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.703398 Jy ! Inverting map ! Added new window around map position (1.8, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550594 Jy ! Component: 100 - total flux cleaned = 0.00973605 Jy ! Component: 150 - total flux cleaned = 0.0124098 Jy ! Component: 200 - total flux cleaned = 0.0147262 Jy ! Total flux subtracted in 200 components = 0.0147262 Jy ! Clean residual min=-0.003361 max=0.003062 Jy/beam ! Clean residual mean=-0.000001 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.718124 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 52 components and 0.718124 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.871 mas, bmaj=3.072 mas, bpa=2.711 degrees ! Estimated noise=2.46086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345932 Jy ! Component: 100 - total flux cleaned = 0.00529455 Jy ! Component: 150 - total flux cleaned = 0.00726756 Jy ! Component: 200 - total flux cleaned = 0.00885843 Jy ! Total flux subtracted in 200 components = 0.00885843 Jy ! Clean residual min=-0.002727 max=0.002592 Jy/beam ! Clean residual mean=-0.000001 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.726982 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144193 Jy ! Component: 100 - total flux cleaned = 0.00274588 Jy ! Component: 150 - total flux cleaned = 0.00393125 Jy ! Component: 200 - total flux cleaned = 0.00495989 Jy ! Total flux subtracted in 200 components = 0.00495989 Jy ! Clean residual min=-0.002260 max=0.002345 Jy/beam ! Clean residual mean=-0.000001 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.731942 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 102 components and 0.731942 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7227 mas, bmaj=1.755 mas, bpa=-0.4171 degrees ! Estimated noise=1.69765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000594939 Jy ! Component: 100 - total flux cleaned = 0.000934785 Jy ! Component: 150 - total flux cleaned = 0.00132908 Jy ! Component: 200 - total flux cleaned = 0.00169738 Jy ! Total flux subtracted in 200 components = 0.00169738 Jy ! Clean residual min=-0.002388 max=0.002331 Jy/beam ! Clean residual mean=-0.000000 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.73364 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 129 components and 0.73364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049703Jy sigma=0.363257 ! Fit after self-cal, rms=0.049678Jy sigma=0.363006 wmodel J0141-0928_X_h_map.mod ! Writing 129 model components to file: J0141-0928_X_h_map.mod wobs J0141-0928_X_h_uvs.fits ! Writing UV FITS file: J0141-0928_X_h_uvs.fits wwins J0141-0928_X_h_map.win ! wwins: Wrote 7 windows to J0141-0928_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.4511e-05 Jy ! Component: 100 - total flux cleaned = -4.50445e-05 Jy ! Component: 150 - total flux cleaned = -8.49668e-05 Jy ! Component: 200 - total flux cleaned = -9.07689e-06 Jy ! Component: 250 - total flux cleaned = 0.00013558 Jy ! Component: 300 - total flux cleaned = 0.000134879 Jy ! Component: 350 - total flux cleaned = 0.000168989 Jy ! Component: 400 - total flux cleaned = 0.000135435 Jy ! Component: 450 - total flux cleaned = 0.00013513 Jy ! Component: 500 - total flux cleaned = 7.13924e-05 Jy ! Component: 550 - total flux cleaned = 7.19758e-05 Jy ! Component: 600 - total flux cleaned = 0.000163546 Jy ! Component: 650 - total flux cleaned = 0.000193573 Jy ! Component: 700 - total flux cleaned = 0.00016393 Jy ! Component: 750 - total flux cleaned = 0.000192848 Jy ! Component: 800 - total flux cleaned = 0.000221489 Jy ! Component: 850 - total flux cleaned = 0.000305225 Jy ! Component: 900 - total flux cleaned = 0.000305632 Jy ! Component: 950 - total flux cleaned = 0.000414815 Jy ! Component: 1000 - total flux cleaned = 0.000548212 Jy ! Component: 1050 - total flux cleaned = 0.000601009 Jy ! Component: 1100 - total flux cleaned = 0.000600914 Jy ! Component: 1150 - total flux cleaned = 0.000601434 Jy ! Component: 1200 - total flux cleaned = 0.000727088 Jy ! Component: 1250 - total flux cleaned = 0.000702249 Jy ! Component: 1300 - total flux cleaned = 0.000751324 Jy ! Component: 1350 - total flux cleaned = 0.000751364 Jy ! Component: 1400 - total flux cleaned = 0.000799527 Jy ! Component: 1450 - total flux cleaned = 0.000894155 Jy ! Component: 1500 - total flux cleaned = 0.000917255 Jy ! Component: 1550 - total flux cleaned = 0.000894125 Jy ! Component: 1600 - total flux cleaned = 0.000985831 Jy ! Component: 1650 - total flux cleaned = 0.00103074 Jy ! Component: 1700 - total flux cleaned = 0.00103051 Jy ! Component: 1750 - total flux cleaned = 0.00107439 Jy ! Component: 1800 - total flux cleaned = 0.0010962 Jy ! Component: 1850 - total flux cleaned = 0.00118268 Jy ! Component: 1900 - total flux cleaned = 0.00113946 Jy ! Component: 1950 - total flux cleaned = 0.00120299 Jy ! Component: 2000 - total flux cleaned = 0.00120289 Jy ! Component: 2050 - total flux cleaned = 0.00116138 Jy ! Component: 2100 - total flux cleaned = 0.00124404 Jy ! Component: 2150 - total flux cleaned = 0.00120341 Jy ! Component: 2200 - total flux cleaned = 0.00124402 Jy ! Component: 2250 - total flux cleaned = 0.00126425 Jy ! Component: 2300 - total flux cleaned = 0.00132379 Jy ! Component: 2350 - total flux cleaned = 0.00128419 Jy ! Component: 2400 - total flux cleaned = 0.001304 Jy ! Component: 2450 - total flux cleaned = 0.00136229 Jy ! Component: 2500 - total flux cleaned = 0.00136214 Jy ! Component: 2550 - total flux cleaned = 0.00138125 Jy ! Component: 2600 - total flux cleaned = 0.00134342 Jy ! Component: 2650 - total flux cleaned = 0.00138084 Jy ! Component: 2700 - total flux cleaned = 0.0013624 Jy ! Component: 2750 - total flux cleaned = 0.00136255 Jy ! Component: 2800 - total flux cleaned = 0.00132607 Jy ! Component: 2850 - total flux cleaned = 0.00132635 Jy ! Component: 2900 - total flux cleaned = 0.00132631 Jy ! Component: 2950 - total flux cleaned = 0.00132619 Jy ! Component: 3000 - total flux cleaned = 0.00136158 Jy ! Component: 3050 - total flux cleaned = 0.00130897 Jy ! Component: 3100 - total flux cleaned = 0.00132653 Jy ! Component: 3150 - total flux cleaned = 0.00137857 Jy ! Component: 3200 - total flux cleaned = 0.00136136 Jy ! Component: 3250 - total flux cleaned = 0.0013614 Jy ! Component: 3300 - total flux cleaned = 0.00137837 Jy ! Component: 3350 - total flux cleaned = 0.00137819 Jy ! Component: 3400 - total flux cleaned = 0.0013781 Jy ! Component: 3450 - total flux cleaned = 0.0013616 Jy ! Component: 3500 - total flux cleaned = 0.0013781 Jy ! Component: 3550 - total flux cleaned = 0.00139433 Jy ! Component: 3600 - total flux cleaned = 0.001427 Jy ! Component: 3650 - total flux cleaned = 0.00152378 Jy ! Component: 3700 - total flux cleaned = 0.00150763 Jy ! Component: 3750 - total flux cleaned = 0.00160318 Jy ! Component: 3800 - total flux cleaned = 0.00160326 Jy ! Component: 3850 - total flux cleaned = 0.00158764 Jy ! Component: 3900 - total flux cleaned = 0.00165016 Jy ! Component: 3950 - total flux cleaned = 0.00164999 Jy ! Component: 4000 - total flux cleaned = 0.0016501 Jy ! Component: 4050 - total flux cleaned = 0.00165022 Jy ! Total flux subtracted in 4096 components = 0.00165018 Jy ! Clean residual min=-0.001190 max=0.000963 Jy/beam ! Clean residual mean=-0.000000 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.73529 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 394 components and 0.73529 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0141-0928_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7227 x 1.755 at -0.4171 degrees (North through East) ! Clean map min=-0.0015915 max=0.53176 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0141-0928_X_h_map.fits wmodel /image_prod/ug002_uva//J0141-0928_X_h_map.mod ! Writing 394 model components to file: /image_prod/ug002_uva//J0141-0928_X_h_map.mod wobs /image_prod/ug002_uva//J0141-0928_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0141-0928_X_h_uvs.fits wwins /image_prod/ug002_uva//J0141-0928_X_h_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0141-0928_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.531756 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254827 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.143765 0.143765 0.287531 0.575061 1.15012 2.30024 4.60049 9.20098 18.402 36.8039 73.6078 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.531 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2086.73 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0141-0928_X_h_dfm.log closed on Wed Mar 4 19:11:48 2020