! Started logfile: /image_prod/ug002_uva//J0141-0928_S_b_dfm.log on Wed Mar  4 19:10:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0141-0928_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0141-0928_S_b_uva.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.861111 visibilities/baseline/integration-bin.
! Found source: J0141-0928
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 558 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0141-0928_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.122711Jy  sigma=12.746246
! Fit after  self-cal, rms=0.457463Jy  sigma=5.143021
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.456 mas, bmaj=10.11 mas, bpa=9.663 degrees
! Estimated noise=3.20554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.428303 Jy
! Component: 100  -  total flux cleaned = 0.524412 Jy
! Total flux subtracted in 100 components = 0.524412 Jy
! Clean residual min=-0.022005 max=0.035541 Jy/beam
! Clean residual mean=-0.000054 rms=0.007194 Jy/beam
! Combined flux in latest and established models = 0.524412 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.524412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105729Jy  sigma=1.138790
! Fit after  self-cal, rms=0.105714Jy  sigma=1.138740
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.991 mas, bmaj=10.74 mas, bpa=8.351 degrees
! Estimated noise=2.78361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0428747 Jy
! Component: 100  -  total flux cleaned = 0.0624886 Jy
! Component: 150  -  total flux cleaned = 0.0718759 Jy
! Component: 200  -  total flux cleaned = 0.0771742 Jy
! Total flux subtracted in 200 components = 0.0771742 Jy
! Clean residual min=-0.014121 max=0.012109 Jy/beam
! Clean residual mean=-0.000039 rms=0.003249 Jy/beam
! Combined flux in latest and established models = 0.601586 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 0.601586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090767Jy  sigma=0.920467
! Fit after  self-cal, rms=0.090640Jy  sigma=0.919321
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.991 x 10.74 at 8.351 degrees (North through East)
! Clean map  min=-0.013103  max=0.55639 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.97     HN        0.99     KP        0.99     
!   LA        1.03     NL        1.03     OV        1.06     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.93     HN        0.98     KP        1.02     
!   LA        1.03     NL        1.20     OV        0.94     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.94     HN        0.99     KP        1.02     
!   LA        1.03     NL        0.86     OV        0.97     PT        0.99     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.090640Jy  sigma=0.919321
! Fit after  self-cal, rms=0.076508Jy  sigma=0.743061
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.986 mas, bmaj=10.73 mas, bpa=8.273 degrees
! Estimated noise=2.76832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000644287 Jy
! Component: 100  -  total flux cleaned = 0.000632191 Jy
! Component: 150  -  total flux cleaned = 0.000714606 Jy
! Component: 200  -  total flux cleaned = 0.00079262 Jy
! Total flux subtracted in 200 components = 0.00079262 Jy
! Clean residual min=-0.006731 max=0.007425 Jy/beam
! Clean residual mean=-0.000009 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.602379 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 34 components and 0.602379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076178Jy  sigma=0.740023
! Fit after  self-cal, rms=0.076285Jy  sigma=0.739770
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076285Jy  sigma=0.739770
! Fit after  self-cal, rms=0.076247Jy  sigma=0.739508
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.986 mas, bmaj=10.73 mas, bpa=8.244 degrees
! Estimated noise=2.76357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010394 Jy
! Component: 100  -  total flux cleaned = -0.00017595 Jy
! Component: 150  -  total flux cleaned = -0.000119704 Jy
! Component: 200  -  total flux cleaned = -2.15278e-05 Jy
! Total flux subtracted in 200 components = -2.15278e-05 Jy
! Clean residual min=-0.006556 max=0.007357 Jy/beam
! Clean residual mean=-0.000009 rms=0.001823 Jy/beam
! Combined flux in latest and established models = 0.602357 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.602357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076094Jy  sigma=0.738561
! Fit after  self-cal, rms=0.076094Jy  sigma=0.738512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108944 Jy
! Component: 100  -  total flux cleaned = 6.59495e-05 Jy
! Component: 150  -  total flux cleaned = 2.33228e-05 Jy
! Component: 200  -  total flux cleaned = -1.51972e-05 Jy
! Total flux subtracted in 200 components = -1.51972e-05 Jy
! Clean residual min=-0.006445 max=0.007332 Jy/beam
! Clean residual mean=-0.000008 rms=0.001808 Jy/beam
! Combined flux in latest and established models = 0.602342 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 45 components and 0.602342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076021Jy  sigma=0.738230
! Fit after  self-cal, rms=0.076022Jy  sigma=0.738199
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076022Jy  sigma=0.738199
! Fit after  self-cal, rms=0.076025Jy  sigma=0.738095
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.986 mas, bmaj=10.73 mas, bpa=8.236 degrees
! Estimated noise=2.76061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000393387 Jy
! Component: 100  -  total flux cleaned = -0.00049962 Jy
! Component: 150  -  total flux cleaned = -0.000528583 Jy
! Component: 200  -  total flux cleaned = -0.00055673 Jy
! Total flux subtracted in 200 components = -0.00055673 Jy
! Clean residual min=-0.006314 max=0.007261 Jy/beam
! Clean residual mean=-0.000008 rms=0.001793 Jy/beam
! Combined flux in latest and established models = 0.601785 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.601785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075969Jy  sigma=0.737914
! Fit after  self-cal, rms=0.075972Jy  sigma=0.737896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116243 Jy
! Component: 100  -  total flux cleaned = 9.11879e-05 Jy
! Component: 150  -  total flux cleaned = 6.62178e-05 Jy
! Component: 200  -  total flux cleaned = 4.44573e-05 Jy
! Total flux subtracted in 200 components = 4.44573e-05 Jy
! Clean residual min=-0.006271 max=0.007251 Jy/beam
! Clean residual mean=-0.000008 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 0.60183 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 0.60183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075941Jy  sigma=0.737828
! Fit after  self-cal, rms=0.075943Jy  sigma=0.737816
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075943Jy  sigma=0.737816
! Fit after  self-cal, rms=0.075960Jy  sigma=0.737781
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.852 mas, bmaj=14.8 mas, bpa=-5.292 degrees
! Estimated noise=3.3046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000839718 Jy
! Component: 100  -  total flux cleaned = 0.000659322 Jy
! Component: 150  -  total flux cleaned = 0.00052152 Jy
! Component: 200  -  total flux cleaned = 0.000548472 Jy
! Total flux subtracted in 200 components = 0.000548472 Jy
! Clean residual min=-0.006797 max=0.007227 Jy/beam
! Clean residual mean=-0.000012 rms=0.001995 Jy/beam
! Combined flux in latest and established models = 0.602378 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 61 components and 0.602378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075980Jy  sigma=0.738171
! Fit after  self-cal, rms=0.075968Jy  sigma=0.738093
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.10346e-05 Jy
! Component: 100  -  total flux cleaned = -3.82968e-05 Jy
! Component: 150  -  total flux cleaned = -1.35643e-05 Jy
! Component: 200  -  total flux cleaned = -1.39071e-05 Jy
! Total flux subtracted in 200 components = -1.39071e-05 Jy
! Clean residual min=-0.006698 max=0.007211 Jy/beam
! Clean residual mean=-0.000012 rms=0.001993 Jy/beam
! Combined flux in latest and established models = 0.602364 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 64 components and 0.602364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075988Jy  sigma=0.738304
! Fit after  self-cal, rms=0.075984Jy  sigma=0.738283
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.986 mas, bmaj=10.73 mas, bpa=8.234 degrees
! Estimated noise=2.75939 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.986 x 10.73 at 8.234 degrees (North through East)
! Clean map  min=-0.0061677  max=0.55682 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075984Jy  sigma=0.738283
! Fit after  self-cal, rms=0.072290Jy  sigma=0.695281
! Inverting map and beam 
! Estimated beam: bmin=3.989 mas, bmaj=10.73 mas, bpa=8.183 degrees
! Estimated noise=2.76019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000795735 Jy
! Component: 100  -  total flux cleaned = -0.000829687 Jy
! Component: 150  -  total flux cleaned = -0.000801562 Jy
! Component: 200  -  total flux cleaned = -0.000802044 Jy
! Total flux subtracted in 200 components = -0.000802044 Jy
! Clean residual min=-0.006504 max=0.007191 Jy/beam
! Clean residual mean=-0.000007 rms=0.001790 Jy/beam
! Combined flux in latest and established models = 0.601562 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 0.601562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072245Jy  sigma=0.694934
! Fit after  self-cal, rms=0.072253Jy  sigma=0.694905
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.35497e-05 Jy
! Component: 100  -  total flux cleaned = 1.08822e-05 Jy
! Component: 150  -  total flux cleaned = 1.07328e-05 Jy
! Component: 200  -  total flux cleaned = -7.55874e-06 Jy
! Total flux subtracted in 200 components = -7.55874e-06 Jy
! Clean residual min=-0.006473 max=0.007224 Jy/beam
! Clean residual mean=-0.000007 rms=0.001786 Jy/beam
! Combined flux in latest and established models = 0.601555 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 77 components and 0.601555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072230Jy  sigma=0.694802
! Fit after  self-cal, rms=0.072238Jy  sigma=0.694788
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072238Jy  sigma=0.694788
! Fit after  self-cal, rms=0.072253Jy  sigma=0.694751
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.459 mas, bmaj=10.08 mas, bpa=9.552 degrees
! Estimated noise=3.15621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.421665 Jy
! Component: 100  -  total flux cleaned = 0.516538 Jy
! Component: 150  -  total flux cleaned = 0.555919 Jy
! Component: 200  -  total flux cleaned = 0.576886 Jy
! Total flux subtracted in 200 components = 0.576886 Jy
! Clean residual min=-0.010392 max=0.010738 Jy/beam
! Clean residual mean=-0.000015 rms=0.002835 Jy/beam
! Combined flux in latest and established models = 0.576886 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.576886 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.989 mas, bmaj=10.73 mas, bpa=8.201 degrees
! Estimated noise=2.75994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130269 Jy
! Component: 100  -  total flux cleaned = 0.0193356 Jy
! Component: 150  -  total flux cleaned = 0.0222357 Jy
! Component: 200  -  total flux cleaned = 0.0223437 Jy
! Total flux subtracted in 200 components = 0.0223437 Jy
! Clean residual min=-0.007020 max=0.007870 Jy/beam
! Clean residual mean=-0.000011 rms=0.001920 Jy/beam
! Combined flux in latest and established models = 0.59923 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 32 components and 0.599229 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.853 mas, bmaj=14.81 mas, bpa=-5.316 degrees
! Estimated noise=3.30319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301615 Jy
! Component: 100  -  total flux cleaned = 0.00332158 Jy
! Component: 150  -  total flux cleaned = 0.00356582 Jy
! Component: 200  -  total flux cleaned = 0.00361787 Jy
! Total flux subtracted in 200 components = 0.00361787 Jy
! Clean residual min=-0.006720 max=0.007724 Jy/beam
! Clean residual mean=-0.000012 rms=0.002051 Jy/beam
! Combined flux in latest and established models = 0.602847 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.68008e-05 Jy
! Component: 100  -  total flux cleaned = -0.000185269 Jy
! Component: 150  -  total flux cleaned = -0.000227044 Jy
! Component: 200  -  total flux cleaned = -0.000306554 Jy
! Total flux subtracted in 200 components = -0.000306554 Jy
! Clean residual min=-0.006656 max=0.007605 Jy/beam
! Clean residual mean=-0.000012 rms=0.002024 Jy/beam
! Combined flux in latest and established models = 0.602541 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 41 components and 0.602541 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.989 mas, bmaj=10.73 mas, bpa=8.201 degrees
! Estimated noise=2.75994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000825881 Jy
! Component: 100  -  total flux cleaned = -0.00107717 Jy
! Component: 150  -  total flux cleaned = -0.00135974 Jy
! Component: 200  -  total flux cleaned = -0.00154274 Jy
! Total flux subtracted in 200 components = -0.00154274 Jy
! Clean residual min=-0.006573 max=0.007241 Jy/beam
! Clean residual mean=-0.000008 rms=0.001815 Jy/beam
! Combined flux in latest and established models = 0.600998 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.600998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072450Jy  sigma=0.695918
! Fit after  self-cal, rms=0.072455Jy  sigma=0.695908
wmodel J0141-0928_S_b_map.mod
! Writing 50 model components to file: J0141-0928_S_b_map.mod
wobs   J0141-0928_S_b_uvs.fits
! Writing UV FITS file: J0141-0928_S_b_uvs.fits
wwins  J0141-0928_S_b_map.win
! wwins: Wrote 1 windows to J0141-0928_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225495 Jy
! Component: 100  -  total flux cleaned = 0.00307206 Jy
! Component: 150  -  total flux cleaned = 0.00360112 Jy
! Component: 200  -  total flux cleaned = 0.00458962 Jy
! Component: 250  -  total flux cleaned = 0.00542291 Jy
! Component: 300  -  total flux cleaned = 0.00577655 Jy
! Component: 350  -  total flux cleaned = 0.00619483 Jy
! Component: 400  -  total flux cleaned = 0.00651502 Jy
! Component: 450  -  total flux cleaned = 0.00674519 Jy
! Component: 500  -  total flux cleaned = 0.00689355 Jy
! Component: 550  -  total flux cleaned = 0.00703557 Jy
! Component: 600  -  total flux cleaned = 0.00731299 Jy
! Component: 650  -  total flux cleaned = 0.00758181 Jy
! Component: 700  -  total flux cleaned = 0.00777979 Jy
! Component: 750  -  total flux cleaned = 0.00803491 Jy
! Component: 800  -  total flux cleaned = 0.00828214 Jy
! Component: 850  -  total flux cleaned = 0.00846343 Jy
! Component: 900  -  total flux cleaned = 0.00864146 Jy
! Component: 950  -  total flux cleaned = 0.00898886 Jy
! Component: 1000  -  total flux cleaned = 0.00910134 Jy
! Component: 1050  -  total flux cleaned = 0.00921303 Jy
! Component: 1100  -  total flux cleaned = 0.00943069 Jy
! Component: 1150  -  total flux cleaned = 0.00969541 Jy
! Component: 1200  -  total flux cleaned = 0.00990302 Jy
! Component: 1250  -  total flux cleaned = 0.0100561 Jy
! Component: 1300  -  total flux cleaned = 0.0103062 Jy
! Component: 1350  -  total flux cleaned = 0.0105014 Jy
! Component: 1400  -  total flux cleaned = 0.0106918 Jy
! Component: 1450  -  total flux cleaned = 0.0106909 Jy
! Component: 1500  -  total flux cleaned = 0.0109211 Jy
! Component: 1550  -  total flux cleaned = 0.0109205 Jy
! Component: 1600  -  total flux cleaned = 0.0111881 Jy
! Component: 1650  -  total flux cleaned = 0.0113636 Jy
! Component: 1700  -  total flux cleaned = 0.0116224 Jy
! Component: 1750  -  total flux cleaned = 0.0118765 Jy
! Component: 1800  -  total flux cleaned = 0.0120437 Jy
! Component: 1850  -  total flux cleaned = 0.0122489 Jy
! Component: 1900  -  total flux cleaned = 0.0125313 Jy
! Component: 1950  -  total flux cleaned = 0.0126508 Jy
! Component: 2000  -  total flux cleaned = 0.0128461 Jy
! Component: 2050  -  total flux cleaned = 0.0130394 Jy
! Component: 2100  -  total flux cleaned = 0.0133053 Jy
! Component: 2150  -  total flux cleaned = 0.0134553 Jy
! Component: 2200  -  total flux cleaned = 0.0136778 Jy
! Component: 2250  -  total flux cleaned = 0.0138246 Jy
! Component: 2300  -  total flux cleaned = 0.0140422 Jy
! Component: 2350  -  total flux cleaned = 0.0141853 Jy
! Component: 2400  -  total flux cleaned = 0.0144348 Jy
! Component: 2450  -  total flux cleaned = 0.0146465 Jy
! Component: 2500  -  total flux cleaned = 0.0148221 Jy
! Component: 2550  -  total flux cleaned = 0.014962 Jy
! Component: 2600  -  total flux cleaned = 0.0150667 Jy
! Component: 2650  -  total flux cleaned = 0.0151364 Jy
! Component: 2700  -  total flux cleaned = 0.0152062 Jy
! Component: 2750  -  total flux cleaned = 0.0152756 Jy
! Component: 2800  -  total flux cleaned = 0.0154151 Jy
! Component: 2850  -  total flux cleaned = 0.015555 Jy
! Component: 2900  -  total flux cleaned = 0.0155903 Jy
! Component: 2950  -  total flux cleaned = 0.0156952 Jy
! Component: 3000  -  total flux cleaned = 0.0158361 Jy
! Component: 3050  -  total flux cleaned = 0.015942 Jy
! Component: 3100  -  total flux cleaned = 0.0160841 Jy
! Component: 3150  -  total flux cleaned = 0.0161909 Jy
! Component: 3200  -  total flux cleaned = 0.016298 Jy
! Component: 3250  -  total flux cleaned = 0.016478 Jy
! Component: 3300  -  total flux cleaned = 0.0165866 Jy
! Component: 3350  -  total flux cleaned = 0.0167688 Jy
! Component: 3400  -  total flux cleaned = 0.0169151 Jy
! Component: 3450  -  total flux cleaned = 0.0170998 Jy
! Component: 3500  -  total flux cleaned = 0.0173237 Jy
! Component: 3550  -  total flux cleaned = 0.0174744 Jy
! Component: 3600  -  total flux cleaned = 0.0175888 Jy
! Component: 3650  -  total flux cleaned = 0.0177809 Jy
! Component: 3700  -  total flux cleaned = 0.0178584 Jy
! Component: 3750  -  total flux cleaned = 0.0180155 Jy
! Component: 3800  -  total flux cleaned = 0.0181344 Jy
! Component: 3850  -  total flux cleaned = 0.0183357 Jy
! Component: 3900  -  total flux cleaned = 0.0184993 Jy
! Component: 3950  -  total flux cleaned = 0.0186237 Jy
! Component: 4000  -  total flux cleaned = 0.0187503 Jy
! Component: 4050  -  total flux cleaned = 0.0189638 Jy
! Total flux subtracted in 4096 components = 0.0190939 Jy
! Clean residual min=-0.002448 max=0.002459 Jy/beam
! Clean residual mean=0.000010 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.620092 Jy
keep
! Adding 252 model components to the UV plane model.
! The established model now contains 302 components and 0.620092 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0141-0928_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.989 x 10.73 at 8.201 degrees (North through East)
! Clean map  min=-0.0057135  max=0.55399 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0141-0928_S_b_map.fits
wmodel /image_prod/ug002_uva//J0141-0928_S_b_map.mod
! Writing 302 model components to file: /image_prod/ug002_uva//J0141-0928_S_b_map.mod
wobs   /image_prod/ug002_uva//J0141-0928_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0141-0928_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J0141-0928_S_b_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0141-0928_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.553985 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000673027 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.364465 0.364465 0.72893 1.45786 2.91572 5.83144 11.6629 23.3257 46.6515 93.303
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.553 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  823.124 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0141-0928_S_b_dfm.log closed on Wed Mar  4 19:10:30 2020