! Started logfile: /image_prod/ug002_uva//J0140-1532_S_dfm.log on Wed Mar  4 19:09:38 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0140-1532_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0140-1532_S_uva.fits
! AN table 1: 20 integrations on 36 of 36 possible baselines.
! AN table 2: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.973611 visibilities/baseline/integration-bin.
! Found source: J0140-1532
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4206 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0140-1532_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.054468Jy  sigma=7.395416
! Fit after  self-cal, rms=0.716323Jy  sigma=5.071260
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.653 mas, bmaj=6.704 mas, bpa=-1.776 degrees
! Estimated noise=2.10537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.217825 Jy
! Component: 100  -  total flux cleaned = 0.266622 Jy
! Total flux subtracted in 100 components = 0.266622 Jy
! Clean residual min=-0.010666 max=0.017403 Jy/beam
! Clean residual mean=0.000015 rms=0.003049 Jy/beam
! Combined flux in latest and established models = 0.266622 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.266622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114579Jy  sigma=0.539788
! Fit after  self-cal, rms=0.114591Jy  sigma=0.539720
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.147 mas, bmaj=7.821 mas, bpa=-3.059 degrees
! Estimated noise=1.60982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224315 Jy
! Component: 100  -  total flux cleaned = 0.0320994 Jy
! Component: 150  -  total flux cleaned = 0.0364951 Jy
! Component: 200  -  total flux cleaned = 0.0380701 Jy
! Total flux subtracted in 200 components = 0.0380701 Jy
! Clean residual min=-0.012199 max=0.007693 Jy/beam
! Clean residual mean=0.000033 rms=0.002320 Jy/beam
! Combined flux in latest and established models = 0.304692 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.304692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109359Jy  sigma=0.501072
! Fit after  self-cal, rms=0.109347Jy  sigma=0.500793
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.147 x 7.821 at -3.059 degrees (North through East)
! Clean map  min=-0.011923  max=0.28236 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     KP        1.02     LA        1.07     
!   MK        0.99     NL        1.04     OV        0.82     PT        1.04     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        0.98     HN        1.03     KP        1.02     
!   LA        1.05     MK        1.10     OV        0.83     PT        1.04     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     KP        1.02     LA        1.04     
!   MK        0.94     NL        1.14     OV        0.96     PT        1.04     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.90     HN        0.99     KP        1.02     
!   LA        1.03     MK        1.07     OV        0.94     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.37     FD        1.01     KP        1.02     LA        1.04     
!   MK        0.96     NL        1.06     OV        0.84     PT        1.04     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.46     FD        0.92     HN        0.99     KP        1.04     
!   LA        1.07     MK        0.98     OV        0.83     PT        1.03     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.109347Jy  sigma=0.500793
! Fit after  self-cal, rms=0.071774Jy  sigma=0.442561
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.147 mas, bmaj=7.86 mas, bpa=-2.878 degrees
! Estimated noise=1.60779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00045937 Jy
! Component: 100  -  total flux cleaned = -0.000595199 Jy
! Component: 150  -  total flux cleaned = -0.00059525 Jy
! Component: 200  -  total flux cleaned = -0.000597479 Jy
! Total flux subtracted in 200 components = -0.000597479 Jy
! Clean residual min=-0.003060 max=0.003293 Jy/beam
! Clean residual mean=0.000003 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.304094 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 32 components and 0.304094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071730Jy  sigma=0.442218
! Fit after  self-cal, rms=0.071727Jy  sigma=0.442022
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071727Jy  sigma=0.442022
! Fit after  self-cal, rms=0.071755Jy  sigma=0.442009
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.149 mas, bmaj=7.865 mas, bpa=-2.869 degrees
! Estimated noise=1.6077 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000337819 Jy
! Component: 100  -  total flux cleaned = -0.000406902 Jy
! Component: 150  -  total flux cleaned = -0.000433823 Jy
! Component: 200  -  total flux cleaned = -0.000434426 Jy
! Total flux subtracted in 200 components = -0.000434426 Jy
! Clean residual min=-0.003039 max=0.003212 Jy/beam
! Clean residual mean=0.000003 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.30366 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.30366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071731Jy  sigma=0.441800
! Fit after  self-cal, rms=0.071722Jy  sigma=0.441769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.17449e-05 Jy
! Component: 100  -  total flux cleaned = -3.46679e-05 Jy
! Component: 150  -  total flux cleaned = -3.51521e-05 Jy
! Component: 200  -  total flux cleaned = -5.37813e-05 Jy
! Total flux subtracted in 200 components = -5.37813e-05 Jy
! Clean residual min=-0.003023 max=0.003126 Jy/beam
! Clean residual mean=0.000003 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.303606 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 36 components and 0.303606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071709Jy  sigma=0.441634
! Fit after  self-cal, rms=0.071703Jy  sigma=0.441611
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071703Jy  sigma=0.441611
! Fit after  self-cal, rms=0.071757Jy  sigma=0.441601
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=7.869 mas, bpa=-2.865 degrees
! Estimated noise=1.60807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155984 Jy
! Component: 100  -  total flux cleaned = -0.000222248 Jy
! Component: 150  -  total flux cleaned = -0.000258804 Jy
! Component: 200  -  total flux cleaned = -0.000259009 Jy
! Total flux subtracted in 200 components = -0.000259009 Jy
! Clean residual min=-0.002999 max=0.003081 Jy/beam
! Clean residual mean=0.000003 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.303347 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 39 components and 0.303347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071746Jy  sigma=0.441510
! Fit after  self-cal, rms=0.071743Jy  sigma=0.441492
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.54049e-05 Jy
! Component: 100  -  total flux cleaned = -2.37403e-05 Jy
! Component: 150  -  total flux cleaned = -3.8978e-05 Jy
! Component: 200  -  total flux cleaned = -3.90464e-05 Jy
! Total flux subtracted in 200 components = -3.90464e-05 Jy
! Clean residual min=-0.002986 max=0.003036 Jy/beam
! Clean residual mean=0.000003 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.303308 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 39 components and 0.303308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071736Jy  sigma=0.441426
! Fit after  self-cal, rms=0.071734Jy  sigma=0.441414
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071734Jy  sigma=0.441414
! Fit after  self-cal, rms=0.071769Jy  sigma=0.441409
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.613 mas, bmaj=16.15 mas, bpa=3 degrees
! Estimated noise=2.03673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000428357 Jy
! Component: 100  -  total flux cleaned = 0.000427475 Jy
! Component: 150  -  total flux cleaned = 0.000427514 Jy
! Component: 200  -  total flux cleaned = 0.000410225 Jy
! Total flux subtracted in 200 components = 0.000410225 Jy
! Clean residual min=-0.002343 max=0.003389 Jy/beam
! Clean residual mean=0.000006 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.303718 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 49 components and 0.303718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071778Jy  sigma=0.441456
! Fit after  self-cal, rms=0.071774Jy  sigma=0.441404
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.94226e-05 Jy
! Component: 100  -  total flux cleaned = 8.99311e-05 Jy
! Component: 150  -  total flux cleaned = 7.35669e-05 Jy
! Component: 200  -  total flux cleaned = 7.41917e-05 Jy
! Total flux subtracted in 200 components = 7.41917e-05 Jy
! Clean residual min=-0.002337 max=0.003409 Jy/beam
! Clean residual mean=0.000006 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.303793 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.303793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071783Jy  sigma=0.441449
! Fit after  self-cal, rms=0.071780Jy  sigma=0.441409
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=7.873 mas, bpa=-2.856 degrees
! Estimated noise=1.60839 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.153 x 7.873 at -2.856 degrees (North through East)
! Clean map  min=-0.0027604  max=0.28179 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.655 mas, bmaj=6.731 mas, bpa=-1.608 degrees
! Estimated noise=2.1052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.217727 Jy
! Component: 100  -  total flux cleaned = 0.266506 Jy
! Component: 150  -  total flux cleaned = 0.285001 Jy
! Component: 200  -  total flux cleaned = 0.294459 Jy
! Total flux subtracted in 200 components = 0.294459 Jy
! Clean residual min=-0.004412 max=0.005553 Jy/beam
! Clean residual mean=0.000001 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.294459 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.294459 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=7.873 mas, bpa=-2.856 degrees
! Estimated noise=1.60839 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621531 Jy
! Component: 100  -  total flux cleaned = 0.009401 Jy
! Component: 150  -  total flux cleaned = 0.00998746 Jy
! Component: 200  -  total flux cleaned = 0.0105135 Jy
! Total flux subtracted in 200 components = 0.0105135 Jy
! Clean residual min=-0.002949 max=0.003015 Jy/beam
! Clean residual mean=0.000003 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.304972 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 37 components and 0.304972 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.613 mas, bmaj=16.15 mas, bpa=3 degrees
! Estimated noise=2.03673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121116 Jy
! Component: 100  -  total flux cleaned = 0.00126851 Jy
! Component: 150  -  total flux cleaned = 0.00124652 Jy
! Component: 200  -  total flux cleaned = 0.00122674 Jy
! Total flux subtracted in 200 components = 0.00122674 Jy
! Clean residual min=-0.002454 max=0.002613 Jy/beam
! Clean residual mean=0.000007 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.306199 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.77878e-05 Jy
! Component: 100  -  total flux cleaned = -4.6862e-05 Jy
! Component: 150  -  total flux cleaned = -7.44422e-05 Jy
! Component: 200  -  total flux cleaned = -8.78545e-05 Jy
! Total flux subtracted in 200 components = -8.78545e-05 Jy
! Clean residual min=-0.002473 max=0.002585 Jy/beam
! Clean residual mean=0.000007 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.306111 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.306111 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=7.873 mas, bpa=-2.856 degrees
! Estimated noise=1.60839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.14505e-05 Jy
! Component: 100  -  total flux cleaned = -4.973e-06 Jy
! Component: 150  -  total flux cleaned = -6.49597e-06 Jy
! Component: 200  -  total flux cleaned = -3.84223e-05 Jy
! Total flux subtracted in 200 components = -3.84223e-05 Jy
! Clean residual min=-0.002990 max=0.002878 Jy/beam
! Clean residual mean=0.000003 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.306073 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.306073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071705Jy  sigma=0.440927
! Fit after  self-cal, rms=0.071687Jy  sigma=0.440800
wmodel J0140-1532_S_map.mod
! Writing 67 model components to file: J0140-1532_S_map.mod
wobs   J0140-1532_S_uvs.fits
! Writing UV FITS file: J0140-1532_S_uvs.fits
wwins  J0140-1532_S_map.win
! wwins: Wrote 2 windows to J0140-1532_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000319533 Jy
! Component: 100  -  total flux cleaned = 0.000613242 Jy
! Component: 150  -  total flux cleaned = 0.000933069 Jy
! Component: 200  -  total flux cleaned = 0.00119596 Jy
! Component: 250  -  total flux cleaned = 0.0014913 Jy
! Component: 300  -  total flux cleaned = 0.00165273 Jy
! Component: 350  -  total flux cleaned = 0.00188728 Jy
! Component: 400  -  total flux cleaned = 0.0021526 Jy
! Component: 450  -  total flux cleaned = 0.0024092 Jy
! Component: 500  -  total flux cleaned = 0.00255164 Jy
! Component: 550  -  total flux cleaned = 0.00272592 Jy
! Component: 600  -  total flux cleaned = 0.00282815 Jy
! Component: 650  -  total flux cleaned = 0.0029265 Jy
! Component: 700  -  total flux cleaned = 0.00289433 Jy
! Component: 750  -  total flux cleaned = 0.00305156 Jy
! Component: 800  -  total flux cleaned = 0.00289792 Jy
! Component: 850  -  total flux cleaned = 0.00292784 Jy
! Component: 900  -  total flux cleaned = 0.00292683 Jy
! Component: 950  -  total flux cleaned = 0.00284057 Jy
! Component: 1000  -  total flux cleaned = 0.00286912 Jy
! Component: 1050  -  total flux cleaned = 0.00284121 Jy
! Component: 1100  -  total flux cleaned = 0.00273185 Jy
! Component: 1150  -  total flux cleaned = 0.00281272 Jy
! Component: 1200  -  total flux cleaned = 0.00265469 Jy
! Component: 1250  -  total flux cleaned = 0.00260319 Jy
! Component: 1300  -  total flux cleaned = 0.00260367 Jy
! Component: 1350  -  total flux cleaned = 0.00260384 Jy
! Component: 1400  -  total flux cleaned = 0.00257895 Jy
! Component: 1450  -  total flux cleaned = 0.00255541 Jy
! Component: 1500  -  total flux cleaned = 0.00255548 Jy
! Component: 1550  -  total flux cleaned = 0.00257856 Jy
! Component: 1600  -  total flux cleaned = 0.00260154 Jy
! Component: 1650  -  total flux cleaned = 0.00260168 Jy
! Component: 1700  -  total flux cleaned = 0.00260153 Jy
! Component: 1750  -  total flux cleaned = 0.00257985 Jy
! Component: 1800  -  total flux cleaned = 0.00264594 Jy
! Component: 1850  -  total flux cleaned = 0.00266762 Jy
! Component: 1900  -  total flux cleaned = 0.002689 Jy
! Component: 1950  -  total flux cleaned = 0.00273096 Jy
! Component: 2000  -  total flux cleaned = 0.00277222 Jy
! Component: 2050  -  total flux cleaned = 0.00275178 Jy
! Component: 2100  -  total flux cleaned = 0.0028732 Jy
! Component: 2150  -  total flux cleaned = 0.00287287 Jy
! Component: 2200  -  total flux cleaned = 0.00293231 Jy
! Component: 2250  -  total flux cleaned = 0.00299011 Jy
! Component: 2300  -  total flux cleaned = 0.00299 Jy
! Component: 2350  -  total flux cleaned = 0.00300923 Jy
! Component: 2400  -  total flux cleaned = 0.00299064 Jy
! Component: 2450  -  total flux cleaned = 0.00308337 Jy
! Component: 2500  -  total flux cleaned = 0.00310148 Jy
! Component: 2550  -  total flux cleaned = 0.00308351 Jy
! Component: 2600  -  total flux cleaned = 0.00310189 Jy
! Component: 2650  -  total flux cleaned = 0.00313741 Jy
! Component: 2700  -  total flux cleaned = 0.00313707 Jy
! Component: 2750  -  total flux cleaned = 0.00311987 Jy
! Component: 2800  -  total flux cleaned = 0.00320537 Jy
! Component: 2850  -  total flux cleaned = 0.00310385 Jy
! Component: 2900  -  total flux cleaned = 0.00307087 Jy
! Component: 2950  -  total flux cleaned = 0.00308753 Jy
! Component: 3000  -  total flux cleaned = 0.00307137 Jy
! Component: 3050  -  total flux cleaned = 0.00310385 Jy
! Component: 3100  -  total flux cleaned = 0.00307146 Jy
! Component: 3150  -  total flux cleaned = 0.00302359 Jy
! Component: 3200  -  total flux cleaned = 0.00303929 Jy
! Component: 3250  -  total flux cleaned = 0.00299241 Jy
! Component: 3300  -  total flux cleaned = 0.00294611 Jy
! Component: 3350  -  total flux cleaned = 0.00300773 Jy
! Component: 3400  -  total flux cleaned = 0.00302299 Jy
! Component: 3450  -  total flux cleaned = 0.00299276 Jy
! Component: 3500  -  total flux cleaned = 0.00299276 Jy
! Component: 3550  -  total flux cleaned = 0.00300759 Jy
! Component: 3600  -  total flux cleaned = 0.00303694 Jy
! Component: 3650  -  total flux cleaned = 0.00299318 Jy
! Component: 3700  -  total flux cleaned = 0.00306552 Jy
! Component: 3750  -  total flux cleaned = 0.00303659 Jy
! Component: 3800  -  total flux cleaned = 0.00302228 Jy
! Component: 3850  -  total flux cleaned = 0.00303643 Jy
! Component: 3900  -  total flux cleaned = 0.00299419 Jy
! Component: 3950  -  total flux cleaned = 0.00298037 Jy
! Component: 4000  -  total flux cleaned = 0.0029943 Jy
! Component: 4050  -  total flux cleaned = 0.00299437 Jy
! Total flux subtracted in 4096 components = 0.00300811 Jy
! Clean residual min=-0.000755 max=0.000783 Jy/beam
! Clean residual mean=0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.309081 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 343 components and 0.309081 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0140-1532_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.153 x 7.873 at -2.856 degrees (North through East)
! Clean map  min=-0.0018368  max=0.28135 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0140-1532_S_map.fits
wmodel /image_prod/ug002_uva//J0140-1532_S_map.mod
! Writing 343 model components to file: /image_prod/ug002_uva//J0140-1532_S_map.mod
wobs   /image_prod/ug002_uva//J0140-1532_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0140-1532_S_uvs.fits
wwins  /image_prod/ug002_uva//J0140-1532_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0140-1532_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.281347 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000232419 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.247828 0.247828 0.495655 0.99131 1.98262 3.96524 7.93048 15.861 31.7219 63.4439
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.281 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1210.52 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0140-1532_S_dfm.log closed on Wed Mar  4 19:09:42 2020