! Started logfile: /image_prod/ug002_uva//J0140+6346_X_dfm.log on Wed Mar 4 19:09:29 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0140+6346_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0140+6346_X_uva.fits ! AN table 1: 80 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975556 visibilities/baseline/integration-bin. ! Found source: J0140+6346 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 42144 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0140+6346_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.020739Jy sigma=9.666225 ! Fit after self-cal, rms=0.836168Jy sigma=7.871165 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7374 mas, bmaj=1.003 mas, bpa=-3.994 degrees ! Estimated noise=0.788681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115455 Jy ! Component: 100 - total flux cleaned = 0.166669 Jy ! Total flux subtracted in 100 components = 0.166669 Jy ! Clean residual min=-0.008588 max=0.029603 Jy/beam ! Clean residual mean=0.000027 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 0.166669 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.166669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091906Jy sigma=0.850839 ! Fit after self-cal, rms=0.089998Jy sigma=0.836392 ! Inverting map ! Added new window around map position (-0.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344378 Jy ! Component: 100 - total flux cleaned = 0.0532093 Jy ! Total flux subtracted in 100 components = 0.0532093 Jy ! Clean residual min=-0.005851 max=0.012486 Jy/beam ! Clean residual mean=0.000022 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.219878 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.219878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068711Jy sigma=0.624205 ! Fit after self-cal, rms=0.067756Jy sigma=0.616216 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155213 Jy ! Component: 100 - total flux cleaned = 0.0257887 Jy ! Total flux subtracted in 100 components = 0.0257887 Jy ! Clean residual min=-0.005042 max=0.007442 Jy/beam ! Clean residual mean=0.000019 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.245667 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.245667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061536Jy sigma=0.555250 ! Fit after self-cal, rms=0.061273Jy sigma=0.552998 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00833255 Jy ! Component: 100 - total flux cleaned = 0.0140463 Jy ! Total flux subtracted in 100 components = 0.0140463 Jy ! Clean residual min=-0.004851 max=0.006556 Jy/beam ! Clean residual mean=0.000018 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.259713 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.259713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059223Jy sigma=0.533893 ! Fit after self-cal, rms=0.059128Jy sigma=0.533114 ! Inverting map ! Added new window around map position (-1, 4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066004 Jy ! Component: 100 - total flux cleaned = 0.0102027 Jy ! Total flux subtracted in 100 components = 0.0102027 Jy ! Clean residual min=-0.004479 max=0.005378 Jy/beam ! Clean residual mean=0.000017 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.269916 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.269916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057941Jy sigma=0.522246 ! Fit after self-cal, rms=0.057866Jy sigma=0.521536 ! Inverting map ! Added new window around map position (1.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054062 Jy ! Component: 100 - total flux cleaned = 0.00842984 Jy ! Total flux subtracted in 100 components = 0.00842984 Jy ! Clean residual min=-0.004260 max=0.005008 Jy/beam ! Clean residual mean=0.000016 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.278345 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.278345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057106Jy sigma=0.514658 ! Fit after self-cal, rms=0.057081Jy sigma=0.514269 ! Inverting map ! Added new window around map position (-1.4, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452175 Jy ! Component: 100 - total flux cleaned = 0.00720243 Jy ! Total flux subtracted in 100 components = 0.00720243 Jy ! Clean residual min=-0.004013 max=0.004921 Jy/beam ! Clean residual mean=0.000015 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.285548 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.285548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056485Jy sigma=0.508759 ! Fit after self-cal, rms=0.056470Jy sigma=0.508570 ! Inverting map ! Added new window around map position (1.6, 9.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487498 Jy ! Component: 100 - total flux cleaned = 0.00751419 Jy ! Total flux subtracted in 100 components = 0.00751419 Jy ! Clean residual min=-0.003711 max=0.004277 Jy/beam ! Clean residual mean=0.000013 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.293062 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.293062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055824Jy sigma=0.501939 ! Fit after self-cal, rms=0.055788Jy sigma=0.501644 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9822 mas, bmaj=1.282 mas, bpa=-2.799 degrees ! Estimated noise=0.369298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642946 Jy ! Component: 100 - total flux cleaned = 0.0112822 Jy ! Component: 150 - total flux cleaned = 0.0153181 Jy ! Component: 200 - total flux cleaned = 0.0187542 Jy ! Total flux subtracted in 200 components = 0.0187542 Jy ! Clean residual min=-0.003979 max=0.004462 Jy/beam ! Clean residual mean=0.000010 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.311816 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 0.311816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054633Jy sigma=0.490886 ! Fit after self-cal, rms=0.054572Jy sigma=0.490304 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9822 x 1.282 at -2.799 degrees (North through East) ! Clean map min=-0.0040189 max=0.14769 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.98 KP 1.04 ! LA 1.01 MK 1.04 NL 1.08 OV 0.90 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.99 KP 1.05 ! LA 0.99 MK 1.06 NL 1.09 OV 0.92 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.98 KP 1.05 ! LA 1.00 MK 1.06 NL 1.09 OV 0.93 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.99 KP 1.04 ! LA 1.02 MK 1.03 NL 1.09 OV 0.92 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.98 KP 1.05 ! LA 1.00 MK 1.01 NL 1.09 OV 0.93 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.96 KP 1.05 ! LA 1.01 MK 1.01 NL 1.10 OV 0.86 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.02 ! LA 1.01 MK 1.04 NL 1.10 OV 0.92 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.97 KP 1.06 ! LA 1.00 MK 1.05 NL 1.10 OV 0.90 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.98 KP 1.05 ! LA 1.00 MK 1.05 NL 1.10 OV 0.93 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.02 ! LA 1.01 MK 1.05 NL 1.10 OV 0.92 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.98 KP 1.05 ! LA 1.00 MK 1.00 NL 1.08 OV 0.92 ! PT 0.91 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.99 KP 1.07 ! LA 1.02 MK 1.01 NL 1.10 OV 0.93 ! PT 0.89 SC 1.02 ! ! ! Fit before self-cal, rms=0.054572Jy sigma=0.490304 ! Fit after self-cal, rms=0.052454Jy sigma=0.468208 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.992 mas, bmaj=1.293 mas, bpa=-2.745 degrees ! Estimated noise=0.37044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035697 Jy ! Component: 100 - total flux cleaned = 0.00532405 Jy ! Component: 150 - total flux cleaned = 0.00666561 Jy ! Component: 200 - total flux cleaned = 0.0078157 Jy ! Total flux subtracted in 200 components = 0.0078157 Jy ! Clean residual min=-0.001786 max=0.002016 Jy/beam ! Clean residual mean=0.000006 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.319632 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 113 components and 0.319632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052026Jy sigma=0.463835 ! Fit after self-cal, rms=0.052009Jy sigma=0.463526 ! Inverting map ! Added new window around map position (-1.4, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140143 Jy ! Component: 100 - total flux cleaned = 0.0024361 Jy ! Component: 150 - total flux cleaned = 0.00322287 Jy ! Component: 200 - total flux cleaned = 0.00381613 Jy ! Total flux subtracted in 200 components = 0.00381613 Jy ! Clean residual min=-0.001616 max=0.001793 Jy/beam ! Clean residual mean=0.000005 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.323448 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 0.323448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051836Jy sigma=0.461832 ! Fit after self-cal, rms=0.051818Jy sigma=0.461711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051818Jy sigma=0.461711 ! Fit after self-cal, rms=0.050878Jy sigma=0.458010 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9822 mas, bmaj=1.29 mas, bpa=-1.126 degrees ! Estimated noise=0.367326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196377 Jy ! Component: 100 - total flux cleaned = 0.000709315 Jy ! Component: 150 - total flux cleaned = 0.00105666 Jy ! Component: 200 - total flux cleaned = 0.00141276 Jy ! Total flux subtracted in 200 components = 0.00141276 Jy ! Clean residual min=-0.001391 max=0.001666 Jy/beam ! Clean residual mean=0.000003 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.324861 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 145 components and 0.324861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050772Jy sigma=0.457013 ! Fit after self-cal, rms=0.050766Jy sigma=0.456933 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737034 Jy ! Component: 100 - total flux cleaned = 0.00105319 Jy ! Component: 150 - total flux cleaned = 0.00141939 Jy ! Component: 200 - total flux cleaned = 0.0017196 Jy ! Total flux subtracted in 200 components = 0.0017196 Jy ! Clean residual min=-0.001260 max=0.001230 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.32658 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 153 components and 0.32658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050689Jy sigma=0.456222 ! Fit after self-cal, rms=0.050681Jy sigma=0.456177 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050681Jy sigma=0.456177 ! Fit after self-cal, rms=0.050502Jy sigma=0.456065 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9795 mas, bmaj=1.289 mas, bpa=-0.7397 degrees ! Estimated noise=0.366129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55151e-05 Jy ! Component: 100 - total flux cleaned = 0.000343645 Jy ! Component: 150 - total flux cleaned = 0.0007286 Jy ! Component: 200 - total flux cleaned = 0.000857158 Jy ! Total flux subtracted in 200 components = 0.000857158 Jy ! Clean residual min=-0.001174 max=0.001103 Jy/beam ! Clean residual mean=0.000002 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.327438 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 161 components and 0.327438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050451Jy sigma=0.455582 ! Fit after self-cal, rms=0.050445Jy sigma=0.455542 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.13211e-07 Jy ! Component: 100 - total flux cleaned = 0.000279916 Jy ! Component: 150 - total flux cleaned = 0.000481439 Jy ! Component: 200 - total flux cleaned = 0.000644669 Jy ! Total flux subtracted in 200 components = 0.000644669 Jy ! Clean residual min=-0.001140 max=0.001077 Jy/beam ! Clean residual mean=0.000002 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.328082 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 167 components and 0.328082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050412Jy sigma=0.455237 ! Fit after self-cal, rms=0.050407Jy sigma=0.455210 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050407Jy sigma=0.455210 ! Fit after self-cal, rms=0.050276Jy sigma=0.455165 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.312 mas, bmaj=2.461 mas, bpa=12.7 degrees ! Estimated noise=0.472544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26647e-05 Jy ! Component: 100 - total flux cleaned = 0.000387497 Jy ! Component: 150 - total flux cleaned = 0.000810402 Jy ! Component: 200 - total flux cleaned = 0.00116276 Jy ! Total flux subtracted in 200 components = 0.00116276 Jy ! Clean residual min=-0.001137 max=0.001016 Jy/beam ! Clean residual mean=0.000003 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.329245 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 189 components and 0.329245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050267Jy sigma=0.455033 ! Fit after self-cal, rms=0.050262Jy sigma=0.454986 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.48759e-05 Jy ! Component: 100 - total flux cleaned = 0.00019796 Jy ! Component: 150 - total flux cleaned = 0.000405229 Jy ! Component: 200 - total flux cleaned = 0.000567336 Jy ! Total flux subtracted in 200 components = 0.000567336 Jy ! Clean residual min=-0.001059 max=0.000942 Jy/beam ! Clean residual mean=0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.329812 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 199 components and 0.329812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050258Jy sigma=0.454930 ! Fit after self-cal, rms=0.050253Jy sigma=0.454905 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9777 mas, bmaj=1.289 mas, bpa=-0.5089 degrees ! Estimated noise=0.365262 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9777 x 1.289 at -0.5089 degrees (North through East) ! Clean map min=-0.00098897 max=0.14509 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7342 mas, bmaj=1.008 mas, bpa=-1.498 degrees ! Estimated noise=0.779444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11769 Jy ! Component: 100 - total flux cleaned = 0.173713 Jy ! Component: 150 - total flux cleaned = 0.204382 Jy ! Component: 200 - total flux cleaned = 0.22305 Jy ! Total flux subtracted in 200 components = 0.22305 Jy ! Clean residual min=-0.003958 max=0.010191 Jy/beam ! Clean residual mean=0.000019 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.22305 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.22305 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9777 mas, bmaj=1.289 mas, bpa=-0.5089 degrees ! Estimated noise=0.365262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208976 Jy ! Component: 100 - total flux cleaned = 0.0341124 Jy ! Component: 150 - total flux cleaned = 0.0441759 Jy ! Component: 200 - total flux cleaned = 0.0522878 Jy ! Total flux subtracted in 200 components = 0.0522878 Jy ! Clean residual min=-0.002674 max=0.004900 Jy/beam ! Clean residual mean=0.000013 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.275338 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 65 components and 0.275338 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673706 Jy ! Component: 100 - total flux cleaned = 0.012403 Jy ! Component: 150 - total flux cleaned = 0.017209 Jy ! Component: 200 - total flux cleaned = 0.0213353 Jy ! Total flux subtracted in 200 components = 0.0213353 Jy ! Clean residual min=-0.001838 max=0.002715 Jy/beam ! Clean residual mean=0.000008 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.296673 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 105 components and 0.296673 Jy ! Inverting map ! Added new window around map position (-0.8, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359708 Jy ! Component: 100 - total flux cleaned = 0.00673078 Jy ! Component: 150 - total flux cleaned = 0.00947862 Jy ! Component: 200 - total flux cleaned = 0.0119145 Jy ! Total flux subtracted in 200 components = 0.0119145 Jy ! Clean residual min=-0.001428 max=0.001778 Jy/beam ! Clean residual mean=0.000006 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.308587 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 135 components and 0.308587 Jy ! Inverting map ! Added new window around map position (4.4, 11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221307 Jy ! Component: 100 - total flux cleaned = 0.00417018 Jy ! Component: 150 - total flux cleaned = 0.00593051 Jy ! Component: 200 - total flux cleaned = 0.00752059 Jy ! Total flux subtracted in 200 components = 0.00752059 Jy ! Clean residual min=-0.001213 max=0.001355 Jy/beam ! Clean residual mean=0.000004 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.316108 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 163 components and 0.316108 Jy ! Inverting map ! Added new window around map position (1.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154727 Jy ! Component: 100 - total flux cleaned = 0.00288043 Jy ! Component: 150 - total flux cleaned = 0.00409478 Jy ! Component: 200 - total flux cleaned = 0.00520477 Jy ! Total flux subtracted in 200 components = 0.00520477 Jy ! Clean residual min=-0.001070 max=0.001039 Jy/beam ! Clean residual mean=0.000003 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.321313 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 188 components and 0.321313 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.312 mas, bmaj=2.461 mas, bpa=12.7 degrees ! Estimated noise=0.472544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194786 Jy ! Component: 100 - total flux cleaned = 0.00339026 Jy ! Component: 150 - total flux cleaned = 0.00456531 Jy ! Component: 200 - total flux cleaned = 0.00554474 Jy ! Total flux subtracted in 200 components = 0.00554474 Jy ! Clean residual min=-0.001010 max=0.001049 Jy/beam ! Clean residual mean=0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.326857 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820748 Jy ! Component: 100 - total flux cleaned = 0.00151458 Jy ! Component: 150 - total flux cleaned = 0.00210473 Jy ! Component: 200 - total flux cleaned = 0.00249545 Jy ! Total flux subtracted in 200 components = 0.00249545 Jy ! Clean residual min=-0.000987 max=0.000884 Jy/beam ! Clean residual mean=-0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.329353 Jy ! Adding 120 model components to the UV plane model. ! The established model now contains 292 components and 0.329353 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9777 mas, bmaj=1.289 mas, bpa=-0.5089 degrees ! Estimated noise=0.365262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.14992e-05 Jy ! Component: 100 - total flux cleaned = 9.54905e-05 Jy ! Component: 150 - total flux cleaned = 0.000232667 Jy ! Component: 200 - total flux cleaned = 0.000404112 Jy ! Total flux subtracted in 200 components = 0.000404112 Jy ! Clean residual min=-0.000800 max=0.000881 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.329757 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 318 components and 0.329757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050157Jy sigma=0.454029 ! Fit after self-cal, rms=0.050120Jy sigma=0.453754 wmodel J0140+6346_X_map.mod ! Writing 318 model components to file: J0140+6346_X_map.mod wobs J0140+6346_X_uvs.fits ! Writing UV FITS file: J0140+6346_X_uvs.fits wwins J0140+6346_X_map.win ! wwins: Wrote 13 windows to J0140+6346_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172554 Jy ! Component: 100 - total flux cleaned = 0.000173105 Jy ! Component: 150 - total flux cleaned = 0.000132224 Jy ! Component: 200 - total flux cleaned = 3.87923e-05 Jy ! Component: 250 - total flux cleaned = -6.61211e-05 Jy ! Component: 300 - total flux cleaned = -0.000130488 Jy ! Component: 350 - total flux cleaned = -0.000206287 Jy ! Component: 400 - total flux cleaned = -0.000255927 Jy ! Component: 450 - total flux cleaned = -0.000255969 Jy ! Component: 500 - total flux cleaned = -0.00026833 Jy ! Component: 550 - total flux cleaned = -0.000304321 Jy ! Component: 600 - total flux cleaned = -0.000327809 Jy ! Component: 650 - total flux cleaned = -0.000316205 Jy ! Component: 700 - total flux cleaned = -0.000339292 Jy ! Component: 750 - total flux cleaned = -0.000327818 Jy ! Component: 800 - total flux cleaned = -0.000316605 Jy ! Component: 850 - total flux cleaned = -0.000316794 Jy ! Component: 900 - total flux cleaned = -0.000360933 Jy ! Component: 950 - total flux cleaned = -0.000328065 Jy ! Component: 1000 - total flux cleaned = -0.000328015 Jy ! Component: 1050 - total flux cleaned = -0.000360208 Jy ! Component: 1100 - total flux cleaned = -0.000338766 Jy ! Component: 1150 - total flux cleaned = -0.000328255 Jy ! Component: 1200 - total flux cleaned = -0.000349282 Jy ! Component: 1250 - total flux cleaned = -0.000338796 Jy ! Component: 1300 - total flux cleaned = -0.000307813 Jy ! Component: 1350 - total flux cleaned = -0.000297587 Jy ! Component: 1400 - total flux cleaned = -0.000317942 Jy ! Component: 1450 - total flux cleaned = -0.000307823 Jy ! Component: 1500 - total flux cleaned = -0.000297803 Jy ! Component: 1550 - total flux cleaned = -0.000267885 Jy ! Component: 1600 - total flux cleaned = -0.000297529 Jy ! Component: 1650 - total flux cleaned = -0.000297428 Jy ! Component: 1700 - total flux cleaned = -0.000268219 Jy ! Component: 1750 - total flux cleaned = -0.000258544 Jy ! Component: 1800 - total flux cleaned = -0.000258591 Jy ! Component: 1850 - total flux cleaned = -0.000258678 Jy ! Component: 1900 - total flux cleaned = -0.000277652 Jy ! Component: 1950 - total flux cleaned = -0.000268358 Jy ! Component: 2000 - total flux cleaned = -0.000287066 Jy ! Component: 2050 - total flux cleaned = -0.000277721 Jy ! Component: 2100 - total flux cleaned = -0.000314671 Jy ! Component: 2150 - total flux cleaned = -0.000296397 Jy ! Component: 2200 - total flux cleaned = -0.000287243 Jy ! Component: 2250 - total flux cleaned = -0.000305384 Jy ! Component: 2300 - total flux cleaned = -0.000314315 Jy ! Component: 2350 - total flux cleaned = -0.000296485 Jy ! Component: 2400 - total flux cleaned = -0.000314293 Jy ! Component: 2450 - total flux cleaned = -0.000331899 Jy ! Component: 2500 - total flux cleaned = -0.000287836 Jy ! Component: 2550 - total flux cleaned = -0.000270374 Jy ! Component: 2600 - total flux cleaned = -0.00026171 Jy ! Component: 2650 - total flux cleaned = -0.000279055 Jy ! Component: 2700 - total flux cleaned = -0.000261883 Jy ! Component: 2750 - total flux cleaned = -0.000253229 Jy ! Component: 2800 - total flux cleaned = -0.000219285 Jy ! Component: 2850 - total flux cleaned = -0.000202396 Jy ! Component: 2900 - total flux cleaned = -0.000227711 Jy ! Component: 2950 - total flux cleaned = -0.000219274 Jy ! Component: 3000 - total flux cleaned = -0.000252561 Jy ! Component: 3050 - total flux cleaned = -0.000202886 Jy ! Component: 3100 - total flux cleaned = -0.000145283 Jy ! Component: 3150 - total flux cleaned = -0.00017806 Jy ! Component: 3200 - total flux cleaned = -0.000161768 Jy ! Component: 3250 - total flux cleaned = -0.000129353 Jy ! Component: 3300 - total flux cleaned = -9.71965e-05 Jy ! Component: 3350 - total flux cleaned = -0.000145325 Jy ! Component: 3400 - total flux cleaned = -0.000129266 Jy ! Component: 3450 - total flux cleaned = -0.000145115 Jy ! Component: 3500 - total flux cleaned = -0.000113513 Jy ! Component: 3550 - total flux cleaned = -0.000121339 Jy ! Component: 3600 - total flux cleaned = -7.43644e-05 Jy ! Component: 3650 - total flux cleaned = -8.21817e-05 Jy ! Component: 3700 - total flux cleaned = -5.88853e-05 Jy ! Component: 3750 - total flux cleaned = -8.96534e-05 Jy ! Component: 3800 - total flux cleaned = -5.89245e-05 Jy ! Component: 3850 - total flux cleaned = -9.71803e-05 Jy ! Component: 3900 - total flux cleaned = -4.39744e-05 Jy ! Component: 3950 - total flux cleaned = -3.64156e-05 Jy ! Component: 4000 - total flux cleaned = 1.6308e-05 Jy ! Component: 4050 - total flux cleaned = 8.84131e-06 Jy ! Total flux subtracted in 4096 components = -6.06803e-06 Jy ! Clean residual min=-0.000407 max=0.000415 Jy/beam ! Clean residual mean=0.000000 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.329751 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 650 components and 0.329751 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0140+6346_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9777 x 1.289 at -0.5089 degrees (North through East) ! Clean map min=-0.00058779 max=0.14412 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0140+6346_X_map.fits wmodel /image_prod/ug002_uva//J0140+6346_X_map.mod ! Writing 650 model components to file: /image_prod/ug002_uva//J0140+6346_X_map.mod wobs /image_prod/ug002_uva//J0140+6346_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0140+6346_X_uvs.fits wwins /image_prod/ug002_uva//J0140+6346_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J0140+6346_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.14412 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126903 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.264162 0.264162 0.528324 1.05665 2.1133 4.22659 8.45319 16.9064 33.8128 67.6255 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.144 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1135.67 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0140+6346_X_dfm.log closed on Wed Mar 4 19:09:37 2020