! Started logfile: /image_prod/ug002_uva//J0138-2254_X_dfm.log on Wed Mar  4 19:08:31 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0138-2254_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0138-2254_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.98836 visibilities/baseline/integration-bin.
! Found source: J0138-2254
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0138-2254_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009196Jy  sigma=8.368171
! Fit after  self-cal, rms=0.899404Jy  sigma=7.439285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6135 mas, bmaj=1.622 mas, bpa=-2.894 degrees
! Estimated noise=1.14975 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0748681 Jy
! Component: 100  -  total flux cleaned = 0.101217 Jy
! Total flux subtracted in 100 components = 0.101217 Jy
! Clean residual min=-0.005501 max=0.010707 Jy/beam
! Clean residual mean=-0.000001 rms=0.001293 Jy/beam
! Combined flux in latest and established models = 0.101217 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.101217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072532Jy  sigma=0.554990
! Fit after  self-cal, rms=0.072322Jy  sigma=0.553102
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111573 Jy
! Component: 100  -  total flux cleaned = 0.016059 Jy
! Total flux subtracted in 100 components = 0.016059 Jy
! Clean residual min=-0.004170 max=0.005549 Jy/beam
! Clean residual mean=-0.000000 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.117276 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 12 components and 0.117276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070305Jy  sigma=0.531274
! Fit after  self-cal, rms=0.070298Jy  sigma=0.531164
! Inverting map 
! Added new window around map position (0.8, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513133 Jy
! Component: 100  -  total flux cleaned = 0.00777898 Jy
! Total flux subtracted in 100 components = 0.00777898 Jy
! Clean residual min=-0.003991 max=0.004614 Jy/beam
! Clean residual mean=0.000001 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.125055 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 24 components and 0.125055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069831Jy  sigma=0.526213
! Fit after  self-cal, rms=0.069799Jy  sigma=0.525653
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7997 mas, bmaj=2.058 mas, bpa=-2.778 degrees
! Estimated noise=0.590554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616917 Jy
! Component: 100  -  total flux cleaned = 0.0100787 Jy
! Component: 150  -  total flux cleaned = 0.0127874 Jy
! Component: 200  -  total flux cleaned = 0.0146942 Jy
! Total flux subtracted in 200 components = 0.0146942 Jy
! Clean residual min=-0.003063 max=0.002673 Jy/beam
! Clean residual mean=0.000000 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.139749 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 49 components and 0.139749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069218Jy  sigma=0.519864
! Fit after  self-cal, rms=0.069185Jy  sigma=0.519473
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7997 x 2.058 at -2.778 degrees (North through East)
! Clean map  min=-0.0026443  max=0.097771 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.92     HN        1.10     KP        1.03     
!   LA        1.03     MK        0.97     NL        1.09     OV        0.93     
!   PT        0.92     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.06     KP        1.00     
!   LA        1.06     MK        1.01     NL        1.07     OV        0.94     
!   PT        0.92     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        1.01     KP        1.04     
!   LA        1.04     MK        0.97     NL        1.01     OV        0.94     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.90     HN        1.05     KP        1.03     
!   LA        1.01     MK        1.03     NL        1.07     OV        0.96     
!   PT        0.95     SC        0.93     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.06     KP        1.05     
!   LA        1.05     MK        1.01     NL        1.05     OV        0.93     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.08     KP        1.10     
!   LA        1.04     MK        0.98     NL        1.03     OV        0.91     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        1.02     KP        1.04     
!   LA        1.03     MK        1.03     NL        1.09     OV        0.98     
!   PT        0.90     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        1.07     KP        1.02     
!   LA        1.02     MK        1.03     NL        1.09     OV        0.93     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.04     KP        1.07     
!   LA        1.02     MK        1.02     NL        1.10     OV        0.91     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.94     HN        1.09     KP        1.02     
!   LA        1.08     MK        1.05     NL        1.07     OV        0.95     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        1.12     KP        1.12     
!   LA        1.02     MK        1.03     NL        1.04     OV        0.94     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.09     KP        1.03     
!   LA        1.02     MK        0.97     NL        1.08     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.069185Jy  sigma=0.519473
! Fit after  self-cal, rms=0.069663Jy  sigma=0.514870
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8031 mas, bmaj=2.059 mas, bpa=-2.461 degrees
! Estimated noise=0.590859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137419 Jy
! Component: 100  -  total flux cleaned = -0.00155828 Jy
! Component: 150  -  total flux cleaned = -0.00145191 Jy
! Component: 200  -  total flux cleaned = -0.00133081 Jy
! Total flux subtracted in 200 components = -0.00133081 Jy
! Clean residual min=-0.001899 max=0.002077 Jy/beam
! Clean residual mean=0.000002 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.138419 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.138419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069600Jy  sigma=0.514414
! Fit after  self-cal, rms=0.069616Jy  sigma=0.514278
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069616Jy  sigma=0.514278
! Fit after  self-cal, rms=0.070646Jy  sigma=0.512575
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8032 mas, bmaj=2.06 mas, bpa=-2.566 degrees
! Estimated noise=0.590442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147632 Jy
! Component: 100  -  total flux cleaned = -0.000388978 Jy
! Component: 150  -  total flux cleaned = -0.000445222 Jy
! Component: 200  -  total flux cleaned = -0.000420318 Jy
! Total flux subtracted in 200 components = -0.000420318 Jy
! Clean residual min=-0.001476 max=0.001577 Jy/beam
! Clean residual mean=0.000002 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.137998 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.137998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070618Jy  sigma=0.512306
! Fit after  self-cal, rms=0.070638Jy  sigma=0.512255
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (22.8, 30.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139429 Jy
! Component: 100  -  total flux cleaned = 0.00172859 Jy
! Component: 150  -  total flux cleaned = 0.00170529 Jy
! Component: 200  -  total flux cleaned = 0.00172629 Jy
! Total flux subtracted in 200 components = 0.00172629 Jy
! Clean residual min=-0.001378 max=0.001500 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.139725 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.139725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070601Jy  sigma=0.511984
! Fit after  self-cal, rms=0.070598Jy  sigma=0.511965
! Inverting map 
! Added new window around map position (-1.6, -12.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130649 Jy
! Component: 100  -  total flux cleaned = 0.00183305 Jy
! Component: 150  -  total flux cleaned = 0.00202842 Jy
! Component: 200  -  total flux cleaned = 0.00206741 Jy
! Total flux subtracted in 200 components = 0.00206741 Jy
! Clean residual min=-0.001266 max=0.001405 Jy/beam
! Clean residual mean=0.000002 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.141792 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 123 components and 0.141792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070571Jy  sigma=0.511715
! Fit after  self-cal, rms=0.070571Jy  sigma=0.511705
! Inverting map 
! Added new window around map position (16.4, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128498 Jy
! Component: 100  -  total flux cleaned = 0.00192471 Jy
! Component: 150  -  total flux cleaned = 0.00222771 Jy
! Component: 200  -  total flux cleaned = 0.00233795 Jy
! Total flux subtracted in 200 components = 0.00233795 Jy
! Clean residual min=-0.001250 max=0.001258 Jy/beam
! Clean residual mean=0.000002 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.14413 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 140 components and 0.14413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070543Jy  sigma=0.511482
! Fit after  self-cal, rms=0.070542Jy  sigma=0.511465
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070542Jy  sigma=0.511465
! Fit after  self-cal, rms=0.070927Jy  sigma=0.511394
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8034 mas, bmaj=2.06 mas, bpa=-2.472 degrees
! Estimated noise=0.590988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.28381e-06 Jy
! Component: 100  -  total flux cleaned = 0.000195672 Jy
! Component: 150  -  total flux cleaned = 0.000356592 Jy
! Component: 200  -  total flux cleaned = 0.000523015 Jy
! Total flux subtracted in 200 components = 0.000523015 Jy
! Clean residual min=-0.001180 max=0.001160 Jy/beam
! Clean residual mean=0.000002 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.144653 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 149 components and 0.144653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070914Jy  sigma=0.511284
! Fit after  self-cal, rms=0.070919Jy  sigma=0.511277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000241756 Jy
! Component: 100  -  total flux cleaned = 0.000309378 Jy
! Component: 150  -  total flux cleaned = 0.000373633 Jy
! Component: 200  -  total flux cleaned = 0.000404681 Jy
! Total flux subtracted in 200 components = 0.000404681 Jy
! Clean residual min=-0.001169 max=0.001142 Jy/beam
! Clean residual mean=0.000002 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.145058 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 159 components and 0.145058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070911Jy  sigma=0.511219
! Fit after  self-cal, rms=0.070910Jy  sigma=0.511217
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070910Jy  sigma=0.511217
! Fit after  self-cal, rms=0.071097Jy  sigma=0.511200
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=5.087 mas, bpa=3.591 degrees
! Estimated noise=0.748596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000323803 Jy
! Component: 100  -  total flux cleaned = 0.000403131 Jy
! Component: 150  -  total flux cleaned = 0.000425467 Jy
! Component: 200  -  total flux cleaned = 0.000396653 Jy
! Total flux subtracted in 200 components = 0.000396653 Jy
! Clean residual min=-0.001266 max=0.001421 Jy/beam
! Clean residual mean=0.000004 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.145454 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 176 components and 0.145454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071094Jy  sigma=0.511170
! Fit after  self-cal, rms=0.071095Jy  sigma=0.511164
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.58518e-05 Jy
! Component: 100  -  total flux cleaned = 9.73125e-05 Jy
! Component: 150  -  total flux cleaned = 7.10462e-05 Jy
! Component: 200  -  total flux cleaned = 3.81875e-05 Jy
! Total flux subtracted in 200 components = 3.81875e-05 Jy
! Clean residual min=-0.001273 max=0.001436 Jy/beam
! Clean residual mean=0.000004 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.145493 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 180 components and 0.145493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071093Jy  sigma=0.511151
! Fit after  self-cal, rms=0.071092Jy  sigma=0.511148
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8036 mas, bmaj=2.06 mas, bpa=-2.387 degrees
! Estimated noise=0.591654 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8036 x 2.06 at -2.387 degrees (North through East)
! Clean map  min=-0.001021  max=0.098134 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6153 mas, bmaj=1.618 mas, bpa=-2.388 degrees
! Estimated noise=1.15848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0753313 Jy
! Component: 100  -  total flux cleaned = 0.101711 Jy
! Component: 150  -  total flux cleaned = 0.112514 Jy
! Component: 200  -  total flux cleaned = 0.118359 Jy
! Total flux subtracted in 200 components = 0.118359 Jy
! Clean residual min=-0.003971 max=0.003745 Jy/beam
! Clean residual mean=0.000000 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 0.118359 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.118359 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8036 mas, bmaj=2.06 mas, bpa=-2.387 degrees
! Estimated noise=0.591654 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00625296 Jy
! Component: 100  -  total flux cleaned = 0.0101994 Jy
! Component: 150  -  total flux cleaned = 0.0129159 Jy
! Component: 200  -  total flux cleaned = 0.0150369 Jy
! Total flux subtracted in 200 components = 0.0150369 Jy
! Clean residual min=-0.001458 max=0.001700 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.133396 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 0.133396 Jy
! Inverting map 
! Added new window around map position (8.6, -20.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185748 Jy
! Component: 100  -  total flux cleaned = 0.0033631 Jy
! Component: 150  -  total flux cleaned = 0.00466461 Jy
! Component: 200  -  total flux cleaned = 0.00580897 Jy
! Total flux subtracted in 200 components = 0.00580897 Jy
! Clean residual min=-0.001290 max=0.001217 Jy/beam
! Clean residual mean=0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.139205 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 85 components and 0.139205 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=5.087 mas, bpa=3.591 degrees
! Estimated noise=0.748596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138768 Jy
! Component: 100  -  total flux cleaned = 0.0024434 Jy
! Component: 150  -  total flux cleaned = 0.0032963 Jy
! Component: 200  -  total flux cleaned = 0.00399312 Jy
! Total flux subtracted in 200 components = 0.00399312 Jy
! Clean residual min=-0.001286 max=0.001351 Jy/beam
! Clean residual mean=0.000003 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.143198 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000576454 Jy
! Component: 100  -  total flux cleaned = 0.00105549 Jy
! Component: 150  -  total flux cleaned = 0.00145715 Jy
! Component: 200  -  total flux cleaned = 0.00179583 Jy
! Total flux subtracted in 200 components = 0.00179583 Jy
! Clean residual min=-0.001189 max=0.001439 Jy/beam
! Clean residual mean=0.000004 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.144994 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 130 components and 0.144994 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8036 mas, bmaj=2.06 mas, bpa=-2.387 degrees
! Estimated noise=0.591654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000203181 Jy
! Component: 100  -  total flux cleaned = -0.00017774 Jy
! Component: 150  -  total flux cleaned = -3.91312e-05 Jy
! Component: 200  -  total flux cleaned = 8.88936e-05 Jy
! Total flux subtracted in 200 components = 8.88936e-05 Jy
! Clean residual min=-0.001139 max=0.001202 Jy/beam
! Clean residual mean=0.000002 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.145083 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 148 components and 0.145083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071100Jy  sigma=0.511240
! Fit after  self-cal, rms=0.071087Jy  sigma=0.511211
wmodel J0138-2254_X_map.mod
! Writing 148 model components to file: J0138-2254_X_map.mod
wobs   J0138-2254_X_uvs.fits
! Writing UV FITS file: J0138-2254_X_uvs.fits
wwins  J0138-2254_X_map.win
! wwins: Wrote 7 windows to J0138-2254_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.69809e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145565 Jy
! Component: 150  -  total flux cleaned = 0.000201234 Jy
! Component: 200  -  total flux cleaned = 0.000219267 Jy
! Component: 250  -  total flux cleaned = 0.000254728 Jy
! Component: 300  -  total flux cleaned = 0.000237649 Jy
! Component: 350  -  total flux cleaned = 0.000237892 Jy
! Component: 400  -  total flux cleaned = 0.000270871 Jy
! Component: 450  -  total flux cleaned = 0.000286793 Jy
! Component: 500  -  total flux cleaned = 0.000302529 Jy
! Component: 550  -  total flux cleaned = 0.000286786 Jy
! Component: 600  -  total flux cleaned = 0.000302156 Jy
! Component: 650  -  total flux cleaned = 0.000302265 Jy
! Component: 700  -  total flux cleaned = 0.000302184 Jy
! Component: 750  -  total flux cleaned = 0.000331596 Jy
! Component: 800  -  total flux cleaned = 0.000360369 Jy
! Component: 850  -  total flux cleaned = 0.000289068 Jy
! Component: 900  -  total flux cleaned = 0.00027505 Jy
! Component: 950  -  total flux cleaned = 0.000274967 Jy
! Component: 1000  -  total flux cleaned = 0.000261131 Jy
! Component: 1050  -  total flux cleaned = 0.000233869 Jy
! Component: 1100  -  total flux cleaned = 0.000220384 Jy
! Component: 1150  -  total flux cleaned = 0.000220178 Jy
! Component: 1200  -  total flux cleaned = 0.000206845 Jy
! Component: 1250  -  total flux cleaned = 0.000168101 Jy
! Component: 1300  -  total flux cleaned = 0.000193667 Jy
! Component: 1350  -  total flux cleaned = 0.000180856 Jy
! Component: 1400  -  total flux cleaned = 0.000180809 Jy
! Component: 1450  -  total flux cleaned = 0.000168469 Jy
! Component: 1500  -  total flux cleaned = 0.000168572 Jy
! Component: 1550  -  total flux cleaned = 0.000168598 Jy
! Component: 1600  -  total flux cleaned = 0.000192739 Jy
! Component: 1650  -  total flux cleaned = 0.00012116 Jy
! Component: 1700  -  total flux cleaned = 0.000145037 Jy
! Component: 1750  -  total flux cleaned = 0.000121769 Jy
! Component: 1800  -  total flux cleaned = 0.000133286 Jy
! Component: 1850  -  total flux cleaned = 0.000133359 Jy
! Component: 1900  -  total flux cleaned = 0.000144726 Jy
! Component: 1950  -  total flux cleaned = 0.00014469 Jy
! Component: 2000  -  total flux cleaned = 0.000167028 Jy
! Component: 2050  -  total flux cleaned = 0.000144869 Jy
! Component: 2100  -  total flux cleaned = 0.000155984 Jy
! Component: 2150  -  total flux cleaned = 0.00018877 Jy
! Component: 2200  -  total flux cleaned = 0.000188845 Jy
! Component: 2250  -  total flux cleaned = 0.000199629 Jy
! Component: 2300  -  total flux cleaned = 0.000189109 Jy
! Component: 2350  -  total flux cleaned = 0.000199738 Jy
! Component: 2400  -  total flux cleaned = 0.000189185 Jy
! Component: 2450  -  total flux cleaned = 0.000199562 Jy
! Component: 2500  -  total flux cleaned = 0.000199595 Jy
! Component: 2550  -  total flux cleaned = 0.000179055 Jy
! Component: 2600  -  total flux cleaned = 0.000189398 Jy
! Component: 2650  -  total flux cleaned = 0.000179277 Jy
! Component: 2700  -  total flux cleaned = 0.000189406 Jy
! Component: 2750  -  total flux cleaned = 0.000179367 Jy
! Component: 2800  -  total flux cleaned = 0.000209325 Jy
! Component: 2850  -  total flux cleaned = 0.000229103 Jy
! Component: 2900  -  total flux cleaned = 0.000199671 Jy
! Component: 2950  -  total flux cleaned = 0.000258452 Jy
! Component: 3000  -  total flux cleaned = 0.000277878 Jy
! Component: 3050  -  total flux cleaned = 0.000239257 Jy
! Component: 3100  -  total flux cleaned = 0.000191407 Jy
! Component: 3150  -  total flux cleaned = 0.000267642 Jy
! Component: 3200  -  total flux cleaned = 0.000248698 Jy
! Component: 3250  -  total flux cleaned = 0.000267564 Jy
! Component: 3300  -  total flux cleaned = 0.000295627 Jy
! Component: 3350  -  total flux cleaned = 0.000295642 Jy
! Component: 3400  -  total flux cleaned = 0.000314122 Jy
! Component: 3450  -  total flux cleaned = 0.000350806 Jy
! Component: 3500  -  total flux cleaned = 0.000323367 Jy
! Component: 3550  -  total flux cleaned = 0.0003597 Jy
! Component: 3600  -  total flux cleaned = 0.000368753 Jy
! Component: 3650  -  total flux cleaned = 0.000377807 Jy
! Component: 3700  -  total flux cleaned = 0.000395657 Jy
! Component: 3750  -  total flux cleaned = 0.00036002 Jy
! Component: 3800  -  total flux cleaned = 0.000360056 Jy
! Component: 3850  -  total flux cleaned = 0.000439086 Jy
! Component: 3900  -  total flux cleaned = 0.000439093 Jy
! Component: 3950  -  total flux cleaned = 0.000465113 Jy
! Component: 4000  -  total flux cleaned = 0.0004565 Jy
! Component: 4050  -  total flux cleaned = 0.000516681 Jy
! Total flux subtracted in 4096 components = 0.000525212 Jy
! Clean residual min=-0.000506 max=0.000527 Jy/beam
! Clean residual mean=0.000000 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.145608 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 435 components and 0.145608 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0138-2254_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8036 x 2.06 at -2.387 degrees (North through East)
! Clean map  min=-0.000816  max=0.09793 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0138-2254_X_map.fits
wmodel /image_prod/ug002_uva//J0138-2254_X_map.mod
! Writing 435 model components to file: /image_prod/ug002_uva//J0138-2254_X_map.mod
wobs   /image_prod/ug002_uva//J0138-2254_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0138-2254_X_uvs.fits
wwins  /image_prod/ug002_uva//J0138-2254_X_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0138-2254_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0979299 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000145554 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.445891 0.445891 0.891783 1.78357 3.56713 7.13426 14.2685 28.537 57.0741
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.097 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  672.809 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0138-2254_X_dfm.log closed on Wed Mar  4 19:08:36 2020