! Started logfile: /image_prod/ug002_uva//J0132-1654_X_dfm.log on Wed Mar 4 19:06:30 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0132-1654_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0132-1654_X_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981579 visibilities/baseline/integration-bin. ! Found source: J0132-1654 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 40284 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0132-1654_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.261149Jy sigma=7.716833 ! Fit after self-cal, rms=0.312666Jy sigma=1.970295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6186 mas, bmaj=1.575 mas, bpa=-3.244 degrees ! Estimated noise=1.26406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.523405 Jy ! Component: 100 - total flux cleaned = 0.649914 Jy ! Total flux subtracted in 100 components = 0.649914 Jy ! Clean residual min=-0.025364 max=0.061433 Jy/beam ! Clean residual mean=0.000024 rms=0.006020 Jy/beam ! Combined flux in latest and established models = 0.649914 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.649914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.182358Jy sigma=1.056488 ! Fit after self-cal, rms=0.182307Jy sigma=1.056295 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0668633 Jy ! Component: 100 - total flux cleaned = 0.109354 Jy ! Total flux subtracted in 100 components = 0.109354 Jy ! Clean residual min=-0.018563 max=0.030577 Jy/beam ! Clean residual mean=0.000017 rms=0.004053 Jy/beam ! Combined flux in latest and established models = 0.759268 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.759268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132306Jy sigma=0.763251 ! Fit after self-cal, rms=0.131435Jy sigma=0.755645 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032437 Jy ! Component: 100 - total flux cleaned = 0.0557587 Jy ! Total flux subtracted in 100 components = 0.0557587 Jy ! Clean residual min=-0.016350 max=0.021076 Jy/beam ! Clean residual mean=0.000013 rms=0.003271 Jy/beam ! Combined flux in latest and established models = 0.815027 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.815027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112794Jy sigma=0.647786 ! Fit after self-cal, rms=0.112451Jy sigma=0.644389 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8141 mas, bmaj=1.948 mas, bpa=-2.532 degrees ! Estimated noise=0.582295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365997 Jy ! Component: 100 - total flux cleaned = 0.0600457 Jy ! Component: 150 - total flux cleaned = 0.0757406 Jy ! Component: 200 - total flux cleaned = 0.0863216 Jy ! Total flux subtracted in 200 components = 0.0863216 Jy ! Clean residual min=-0.019361 max=0.021579 Jy/beam ! Clean residual mean=0.000021 rms=0.003923 Jy/beam ! Combined flux in latest and established models = 0.901349 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 46 components and 0.901349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096696Jy sigma=0.557663 ! Fit after self-cal, rms=0.096133Jy sigma=0.552377 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8141 x 1.948 at -2.532 degrees (North through East) ! Clean map min=-0.01735 max=0.70088 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.08 KP 1.08 ! LA 1.02 MK 1.02 NL 1.09 OV 1.03 ! PT 0.90 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.05 KP 1.07 ! LA 1.02 MK 1.00 NL 1.09 OV 1.00 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.05 KP 1.06 ! LA 1.00 MK 1.01 NL 1.08 OV 1.01 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.08 KP 1.05 ! LA 1.03 MK 1.02 NL 1.05 OV 1.02 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 1.04 KP 1.06 ! LA 0.98 MK 1.00 NL 1.07 OV 1.00 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.02 KP 1.05 ! LA 0.97 MK 0.99 NL 1.09 OV 1.01 ! PT 0.89 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.01 KP 1.05 ! LA 0.97 MK 1.05 NL 1.09 OV 0.98 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.04 KP 1.07 ! LA 0.99 MK 0.98 NL 1.06 OV 1.02 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.07 KP 1.02 ! LA 1.00 MK 0.97 NL 1.04 OV 0.98 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.04 KP 1.05 ! LA 0.97 MK 1.02 NL 1.07 OV 1.01 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.02 KP 1.04 ! LA 0.99 MK 0.98 NL 1.03 OV 0.98 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.95 HN 1.07 KP 1.06 ! LA 0.97 MK 1.03 NL 1.06 OV 0.99 ! PT 0.88 SC 1.00 ! ! ! Fit before self-cal, rms=0.096133Jy sigma=0.552377 ! Fit after self-cal, rms=0.075074Jy sigma=0.437305 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8205 mas, bmaj=1.953 mas, bpa=-2.422 degrees ! Estimated noise=0.582243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136968 Jy ! Component: 100 - total flux cleaned = 0.0209579 Jy ! Component: 150 - total flux cleaned = 0.0240712 Jy ! Component: 200 - total flux cleaned = 0.0253691 Jy ! Total flux subtracted in 200 components = 0.0253691 Jy ! Clean residual min=-0.007657 max=0.009751 Jy/beam ! Clean residual mean=0.000004 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.926718 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.926718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071963Jy sigma=0.419391 ! Fit after self-cal, rms=0.071710Jy sigma=0.418008 ! Inverting map ! Added new window around map position (-10.8, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00949695 Jy ! Component: 100 - total flux cleaned = 0.0150304 Jy ! Component: 150 - total flux cleaned = 0.0182657 Jy ! Component: 200 - total flux cleaned = 0.0204118 Jy ! Total flux subtracted in 200 components = 0.0204118 Jy ! Clean residual min=-0.006857 max=0.006270 Jy/beam ! Clean residual mean=0.000003 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.947129 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.947129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070059Jy sigma=0.408322 ! Fit after self-cal, rms=0.069953Jy sigma=0.407833 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069953Jy sigma=0.407833 ! Fit after self-cal, rms=0.068101Jy sigma=0.397055 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8199 mas, bmaj=1.953 mas, bpa=-2.446 degrees ! Estimated noise=0.58108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00297788 Jy ! Component: 100 - total flux cleaned = -0.001113 Jy ! Component: 150 - total flux cleaned = 0.000270968 Jy ! Component: 200 - total flux cleaned = 0.00128069 Jy ! Total flux subtracted in 200 components = 0.00128069 Jy ! Clean residual min=-0.004750 max=0.005414 Jy/beam ! Clean residual mean=0.000001 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.94841 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.94841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067553Jy sigma=0.393669 ! Fit after self-cal, rms=0.067502Jy sigma=0.393400 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.6, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058177 Jy ! Component: 100 - total flux cleaned = 0.00810539 Jy ! Component: 150 - total flux cleaned = 0.00905649 Jy ! Component: 200 - total flux cleaned = 0.00998456 Jy ! Total flux subtracted in 200 components = 0.00998456 Jy ! Clean residual min=-0.004418 max=0.004788 Jy/beam ! Clean residual mean=-0.000000 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.958395 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 0.958394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066912Jy sigma=0.389608 ! Fit after self-cal, rms=0.066848Jy sigma=0.389328 ! Inverting map ! Added new window around map position (-2.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261749 Jy ! Component: 100 - total flux cleaned = 0.00328222 Jy ! Component: 150 - total flux cleaned = 0.00392618 Jy ! Component: 200 - total flux cleaned = 0.004322 Jy ! Total flux subtracted in 200 components = 0.004322 Jy ! Clean residual min=-0.003991 max=0.003659 Jy/beam ! Clean residual mean=-0.000000 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.962716 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 140 components and 0.962717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066455Jy sigma=0.387080 ! Fit after self-cal, rms=0.066443Jy sigma=0.387007 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066443Jy sigma=0.387007 ! Fit after self-cal, rms=0.066239Jy sigma=0.386048 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8196 mas, bmaj=1.952 mas, bpa=-2.449 degrees ! Estimated noise=0.580497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000806533 Jy ! Component: 100 - total flux cleaned = -0.000311069 Jy ! Component: 150 - total flux cleaned = 0.000337785 Jy ! Component: 200 - total flux cleaned = 0.000792905 Jy ! Total flux subtracted in 200 components = 0.000792905 Jy ! Clean residual min=-0.003463 max=0.003377 Jy/beam ! Clean residual mean=-0.000000 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.963509 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 153 components and 0.963509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066039Jy sigma=0.384765 ! Fit after self-cal, rms=0.066023Jy sigma=0.384685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.77341e-05 Jy ! Component: 100 - total flux cleaned = 0.000264459 Jy ! Component: 150 - total flux cleaned = 0.000589467 Jy ! Component: 200 - total flux cleaned = 0.000692016 Jy ! Total flux subtracted in 200 components = 0.000692016 Jy ! Clean residual min=-0.003377 max=0.003254 Jy/beam ! Clean residual mean=-0.000000 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.964201 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 165 components and 0.964202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065936Jy sigma=0.384146 ! Fit after self-cal, rms=0.065932Jy sigma=0.384128 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065932Jy sigma=0.384128 ! Fit after self-cal, rms=0.065873Jy sigma=0.383891 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.1 mas, bmaj=4.122 mas, bpa=3.302 degrees ! Estimated noise=0.787949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181934 Jy ! Component: 100 - total flux cleaned = 0.00196139 Jy ! Component: 150 - total flux cleaned = 0.00196161 Jy ! Component: 200 - total flux cleaned = 0.00210898 Jy ! Total flux subtracted in 200 components = 0.00210898 Jy ! Clean residual min=-0.003699 max=0.003409 Jy/beam ! Clean residual mean=-0.000001 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.966311 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 181 components and 0.966311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065851Jy sigma=0.383704 ! Fit after self-cal, rms=0.065840Jy sigma=0.383632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330526 Jy ! Component: 100 - total flux cleaned = 0.000622757 Jy ! Component: 150 - total flux cleaned = 0.000796516 Jy ! Component: 200 - total flux cleaned = 0.000828276 Jy ! Total flux subtracted in 200 components = 0.000828276 Jy ! Clean residual min=-0.003664 max=0.003317 Jy/beam ! Clean residual mean=-0.000002 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.967139 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 188 components and 0.967139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065846Jy sigma=0.383669 ! Fit after self-cal, rms=0.065845Jy sigma=0.383656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8195 mas, bmaj=1.952 mas, bpa=-2.451 degrees ! Estimated noise=0.580135 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8195 x 1.952 at -2.451 degrees (North through East) ! Clean map min=-0.0028986 max=0.69949 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065845Jy sigma=0.383656 ! Fit after self-cal, rms=0.061937Jy sigma=0.355700 ! Inverting map and beam ! Estimated beam: bmin=0.8196 mas, bmaj=1.952 mas, bpa=-2.457 degrees ! Estimated noise=0.58043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000866525 Jy ! Component: 100 - total flux cleaned = -0.00137249 Jy ! Component: 150 - total flux cleaned = -0.00167602 Jy ! Component: 200 - total flux cleaned = -0.00186335 Jy ! Total flux subtracted in 200 components = -0.00186335 Jy ! Clean residual min=-0.003110 max=0.003065 Jy/beam ! Clean residual mean=-0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.965275 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 201 components and 0.965275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061852Jy sigma=0.355149 ! Fit after self-cal, rms=0.061849Jy sigma=0.355131 ! Inverting map ! Added new window around map position (-8.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227548 Jy ! Component: 100 - total flux cleaned = 0.00206097 Jy ! Component: 150 - total flux cleaned = 0.00201165 Jy ! Component: 200 - total flux cleaned = 0.00196513 Jy ! Total flux subtracted in 200 components = 0.00196513 Jy ! Clean residual min=-0.002906 max=0.002353 Jy/beam ! Clean residual mean=-0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.967241 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 215 components and 0.967241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061724Jy sigma=0.354309 ! Fit after self-cal, rms=0.061721Jy sigma=0.354286 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061721Jy sigma=0.354286 ! Fit after self-cal, rms=0.061690Jy sigma=0.354206 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6222 mas, bmaj=1.572 mas, bpa=-3.149 degrees ! Estimated noise=1.27227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.526401 Jy ! Component: 100 - total flux cleaned = 0.652252 Jy ! Component: 150 - total flux cleaned = 0.715316 Jy ! Component: 200 - total flux cleaned = 0.755046 Jy ! Total flux subtracted in 200 components = 0.755046 Jy ! Clean residual min=-0.010035 max=0.021700 Jy/beam ! Clean residual mean=0.000011 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 0.755046 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.755046 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8194 mas, bmaj=1.951 mas, bpa=-2.458 degrees ! Estimated noise=0.580186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048993 Jy ! Component: 100 - total flux cleaned = 0.0780249 Jy ! Component: 150 - total flux cleaned = 0.0975014 Jy ! Component: 200 - total flux cleaned = 0.112365 Jy ! Total flux subtracted in 200 components = 0.112365 Jy ! Clean residual min=-0.006154 max=0.010113 Jy/beam ! Clean residual mean=0.000011 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.86741 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 52 components and 0.86741 Jy ! Inverting map ! Added new window around map position (-0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120714 Jy ! Component: 100 - total flux cleaned = 0.0218916 Jy ! Component: 150 - total flux cleaned = 0.0303232 Jy ! Component: 200 - total flux cleaned = 0.0376052 Jy ! Total flux subtracted in 200 components = 0.0376052 Jy ! Clean residual min=-0.004829 max=0.005525 Jy/beam ! Clean residual mean=0.000006 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.905016 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 96 components and 0.905016 Jy ! Inverting map ! Added new window around map position (1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00653172 Jy ! Component: 100 - total flux cleaned = 0.0121488 Jy ! Component: 150 - total flux cleaned = 0.0171543 Jy ! Component: 200 - total flux cleaned = 0.021654 Jy ! Total flux subtracted in 200 components = 0.021654 Jy ! Clean residual min=-0.004057 max=0.003385 Jy/beam ! Clean residual mean=0.000003 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.92667 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 136 components and 0.92667 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=4.121 mas, bpa=3.325 degrees ! Estimated noise=0.788044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790168 Jy ! Component: 100 - total flux cleaned = 0.0138438 Jy ! Component: 150 - total flux cleaned = 0.0185082 Jy ! Component: 200 - total flux cleaned = 0.0223512 Jy ! Total flux subtracted in 200 components = 0.0223512 Jy ! Clean residual min=-0.003715 max=0.004147 Jy/beam ! Clean residual mean=0.000002 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.949021 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321174 Jy ! Component: 100 - total flux cleaned = 0.00591524 Jy ! Component: 150 - total flux cleaned = 0.00820518 Jy ! Component: 200 - total flux cleaned = 0.0101563 Jy ! Total flux subtracted in 200 components = 0.0101563 Jy ! Clean residual min=-0.003243 max=0.003266 Jy/beam ! Clean residual mean=-0.000000 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.959177 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 243 components and 0.959177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8194 mas, bmaj=1.951 mas, bpa=-2.458 degrees ! Estimated noise=0.580186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183873 Jy ! Component: 100 - total flux cleaned = 0.00247423 Jy ! Component: 150 - total flux cleaned = 0.00303679 Jy ! Component: 200 - total flux cleaned = 0.00360418 Jy ! Total flux subtracted in 200 components = 0.00360418 Jy ! Clean residual min=-0.002706 max=0.001983 Jy/beam ! Clean residual mean=-0.000000 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.962781 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 266 components and 0.962781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061485Jy sigma=0.352987 ! Fit after self-cal, rms=0.061420Jy sigma=0.352656 wmodel J0132-1654_X_map.mod ! Writing 266 model components to file: J0132-1654_X_map.mod wobs J0132-1654_X_uvs.fits ! Writing UV FITS file: J0132-1654_X_uvs.fits wwins J0132-1654_X_map.win ! wwins: Wrote 9 windows to J0132-1654_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110894 Jy ! Component: 100 - total flux cleaned = -0.00199301 Jy ! Component: 150 - total flux cleaned = -0.00266213 Jy ! Component: 200 - total flux cleaned = -0.00309476 Jy ! Component: 250 - total flux cleaned = -0.00322131 Jy ! Component: 300 - total flux cleaned = -0.00325156 Jy ! Component: 350 - total flux cleaned = -0.00339901 Jy ! Component: 400 - total flux cleaned = -0.00351285 Jy ! Component: 450 - total flux cleaned = -0.00351313 Jy ! Component: 500 - total flux cleaned = -0.00351456 Jy ! Component: 550 - total flux cleaned = -0.00351507 Jy ! Component: 600 - total flux cleaned = -0.00351524 Jy ! Component: 650 - total flux cleaned = -0.00346547 Jy ! Component: 700 - total flux cleaned = -0.00353908 Jy ! Component: 750 - total flux cleaned = -0.00349144 Jy ! Component: 800 - total flux cleaned = -0.00349178 Jy ! Component: 850 - total flux cleaned = -0.00353756 Jy ! Component: 900 - total flux cleaned = -0.00353668 Jy ! Component: 950 - total flux cleaned = -0.0034254 Jy ! Component: 1000 - total flux cleaned = -0.00342553 Jy ! Component: 1050 - total flux cleaned = -0.00344692 Jy ! Component: 1100 - total flux cleaned = -0.00334169 Jy ! Component: 1150 - total flux cleaned = -0.00340418 Jy ! Component: 1200 - total flux cleaned = -0.00344509 Jy ! Component: 1250 - total flux cleaned = -0.00348538 Jy ! Component: 1300 - total flux cleaned = -0.0035053 Jy ! Component: 1350 - total flux cleaned = -0.00356375 Jy ! Component: 1400 - total flux cleaned = -0.00356358 Jy ! Component: 1450 - total flux cleaned = -0.00356378 Jy ! Component: 1500 - total flux cleaned = -0.00365684 Jy ! Component: 1550 - total flux cleaned = -0.00367503 Jy ! Component: 1600 - total flux cleaned = -0.00371125 Jy ! Component: 1650 - total flux cleaned = -0.00376494 Jy ! Component: 1700 - total flux cleaned = -0.00378227 Jy ! Component: 1750 - total flux cleaned = -0.00378219 Jy ! Component: 1800 - total flux cleaned = -0.00379941 Jy ! Component: 1850 - total flux cleaned = -0.00381635 Jy ! Component: 1900 - total flux cleaned = -0.00379979 Jy ! Component: 1950 - total flux cleaned = -0.00384959 Jy ! Component: 2000 - total flux cleaned = -0.00388222 Jy ! Component: 2050 - total flux cleaned = -0.00386595 Jy ! Component: 2100 - total flux cleaned = -0.00389776 Jy ! Component: 2150 - total flux cleaned = -0.003945 Jy ! Component: 2200 - total flux cleaned = -0.00391408 Jy ! Component: 2250 - total flux cleaned = -0.00399126 Jy ! Component: 2300 - total flux cleaned = -0.00402184 Jy ! Component: 2350 - total flux cleaned = -0.00406717 Jy ! Component: 2400 - total flux cleaned = -0.00405237 Jy ! Component: 2450 - total flux cleaned = -0.00400826 Jy ! Component: 2500 - total flux cleaned = -0.00403733 Jy ! Component: 2550 - total flux cleaned = -0.00408049 Jy ! Component: 2600 - total flux cleaned = -0.00402312 Jy ! Component: 2650 - total flux cleaned = -0.00398061 Jy ! Component: 2700 - total flux cleaned = -0.00406483 Jy ! Component: 2750 - total flux cleaned = -0.00407874 Jy ! Component: 2800 - total flux cleaned = -0.00405104 Jy ! Component: 2850 - total flux cleaned = -0.00407824 Jy ! Component: 2900 - total flux cleaned = -0.00406484 Jy ! Component: 2950 - total flux cleaned = -0.00413186 Jy ! Component: 3000 - total flux cleaned = -0.0041319 Jy ! Component: 3050 - total flux cleaned = -0.00415813 Jy ! Component: 3100 - total flux cleaned = -0.00417118 Jy ! Component: 3150 - total flux cleaned = -0.0041711 Jy ! Component: 3200 - total flux cleaned = -0.00415831 Jy ! Component: 3250 - total flux cleaned = -0.00419618 Jy ! Component: 3300 - total flux cleaned = -0.00423357 Jy ! Component: 3350 - total flux cleaned = -0.00420859 Jy ! Component: 3400 - total flux cleaned = -0.00420875 Jy ! Component: 3450 - total flux cleaned = -0.00423337 Jy ! Component: 3500 - total flux cleaned = -0.00425752 Jy ! Component: 3550 - total flux cleaned = -0.00423356 Jy ! Component: 3600 - total flux cleaned = -0.00428125 Jy ! Component: 3650 - total flux cleaned = -0.00431666 Jy ! Component: 3700 - total flux cleaned = -0.00431661 Jy ! Component: 3750 - total flux cleaned = -0.00431653 Jy ! Component: 3800 - total flux cleaned = -0.00435094 Jy ! Component: 3850 - total flux cleaned = -0.00432816 Jy ! Component: 3900 - total flux cleaned = -0.00433944 Jy ! Component: 3950 - total flux cleaned = -0.004373 Jy ! Component: 4000 - total flux cleaned = -0.00432853 Jy ! Component: 4050 - total flux cleaned = -0.0043286 Jy ! Total flux subtracted in 4096 components = -0.00433956 Jy ! Clean residual min=-0.000569 max=0.000670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.958442 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 576 components and 0.958441 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0132-1654_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8194 x 1.951 at -2.458 degrees (North through East) ! Clean map min=-0.0013402 max=0.70318 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0132-1654_X_map.fits wmodel /image_prod/ug002_uva//J0132-1654_X_map.mod ! Writing 576 model components to file: /image_prod/ug002_uva//J0132-1654_X_map.mod wobs /image_prod/ug002_uva//J0132-1654_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0132-1654_X_uvs.fits wwins /image_prod/ug002_uva//J0132-1654_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0132-1654_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.703182 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193704 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0826405 0.0826405 0.165281 0.330562 0.661124 1.32225 2.64449 5.28899 10.578 21.156 42.3119 84.6238 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.703 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3630.18 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0132-1654_X_dfm.log closed on Wed Mar 4 19:06:37 2020