! Started logfile: /image_prod/ug002_uva//J0132+4325_X_dfm.log on Wed Mar 4 19:05:55 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0132+4325_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0132+4325_X_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! AN table 2: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.969444 visibilities/baseline/integration-bin. ! Found source: J0132+4325 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 25128 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0132+4325_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.028593Jy sigma=9.223117 ! Fit after self-cal, rms=0.777218Jy sigma=6.936744 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7032 mas, bmaj=1.101 mas, bpa=-6.149 degrees ! Estimated noise=1.02406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172581 Jy ! Component: 100 - total flux cleaned = 0.210358 Jy ! Total flux subtracted in 100 components = 0.210358 Jy ! Clean residual min=-0.007528 max=0.013296 Jy/beam ! Clean residual mean=0.000008 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.210358 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.210358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070011Jy sigma=0.591208 ! Fit after self-cal, rms=0.070003Jy sigma=0.591125 ! Inverting map ! Added new window around map position (-1.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143999 Jy ! Component: 100 - total flux cleaned = 0.0233421 Jy ! Total flux subtracted in 100 components = 0.0233421 Jy ! Clean residual min=-0.007265 max=0.012364 Jy/beam ! Clean residual mean=0.000003 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.2337 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.2337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065902Jy sigma=0.547359 ! Fit after self-cal, rms=0.065764Jy sigma=0.545823 ! Inverting map ! Added new window around map position (1.4, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00984949 Jy ! Component: 100 - total flux cleaned = 0.0162503 Jy ! Total flux subtracted in 100 components = 0.0162503 Jy ! Clean residual min=-0.007196 max=0.009227 Jy/beam ! Clean residual mean=0.000001 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.24995 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.24995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063759Jy sigma=0.525710 ! Fit after self-cal, rms=0.063723Jy sigma=0.525414 ! Inverting map ! Added new window around map position (5.6, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00805036 Jy ! Component: 100 - total flux cleaned = 0.0117853 Jy ! Total flux subtracted in 100 components = 0.0117853 Jy ! Clean residual min=-0.006441 max=0.008480 Jy/beam ! Clean residual mean=0.000001 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.261736 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.261736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062631Jy sigma=0.517019 ! Fit after self-cal, rms=0.062564Jy sigma=0.516315 ! Inverting map ! Added new window around map position (-1.2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00682966 Jy ! Component: 100 - total flux cleaned = 0.00905002 Jy ! Total flux subtracted in 100 components = 0.00905002 Jy ! Clean residual min=-0.006597 max=0.007743 Jy/beam ! Clean residual mean=-0.000000 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.270786 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.270786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061565Jy sigma=0.507853 ! Fit after self-cal, rms=0.061506Jy sigma=0.507197 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9329 mas, bmaj=1.397 mas, bpa=-7.847 degrees ! Estimated noise=0.505935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501947 Jy ! Component: 100 - total flux cleaned = 0.00742561 Jy ! Component: 150 - total flux cleaned = 0.00866582 Jy ! Component: 200 - total flux cleaned = 0.0087768 Jy ! Total flux subtracted in 200 components = 0.0087768 Jy ! Clean residual min=-0.006995 max=0.006475 Jy/beam ! Clean residual mean=0.000000 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.279562 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.279562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060766Jy sigma=0.501157 ! Fit after self-cal, rms=0.060752Jy sigma=0.500952 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9329 x 1.397 at -7.847 degrees (North through East) ! Clean map min=-0.0064303 max=0.21937 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.92 KP 1.06 ! LA 1.03 MK 1.02 NL 1.04 OV 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.09 HN 1.84 KP 1.07 ! LA 1.03 MK 1.02 OV 0.94 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.89 KP 1.05 ! LA 1.03 MK 1.01 NL 1.04 OV 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.05 HN 1.91 KP 1.05 ! LA 1.02 MK 1.02 OV 0.95 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.91 KP 1.04 ! LA 1.02 MK 1.04 NL 1.04 OV 0.94 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.03 HN 1.81 KP 1.06 ! LA 1.04 MK 1.03 OV 0.96 PT 0.95 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.93 KP 1.04 ! LA 1.00 MK 0.99 NL 1.06 OV 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.05 HN 1.80 KP 1.05 ! LA 1.00 MK 0.98 OV 0.94 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.91 KP 1.03 ! LA 0.98 MK 1.03 NL 1.04 OV 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.07 HN 1.75 KP 1.06 ! LA 1.00 MK 1.03 OV 0.95 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.93 KP 1.03 ! LA 1.01 MK 1.01 NL 1.03 OV 0.93 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.05 HN 1.98 KP 1.05 ! LA 1.00 MK 1.01 OV 0.95 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.92 KP 1.04 ! LA 1.01 MK 1.03 NL 1.02 OV 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.08 HN 1.83 KP 1.04 ! LA 1.00 MK 1.01 OV 0.94 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.91 KP 1.04 ! LA 1.00 MK 1.01 NL 1.04 OV 0.92 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.04 HN 1.75 KP 1.03 ! LA 1.02 MK 1.02 OV 0.94 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.91 KP 1.01 ! LA 0.97 MK 1.01 NL 1.05 OV 0.95 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.01 HN 1.73 KP 1.04 ! LA 1.00 MK 0.96 OV 0.95 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.93 KP 1.01 ! LA 0.99 MK 1.02 NL 1.02 OV 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.04 HN 1.86 KP 1.04 ! LA 1.01 MK 1.01 OV 0.93 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.93 KP 1.03 ! LA 1.02 MK 1.00 NL 1.03 OV 0.92 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.04 HN 1.77 KP 1.04 ! LA 1.01 MK 0.97 OV 0.95 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.94 KP 1.01 ! LA 0.98 MK 1.01 NL 1.00 OV 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 1.04 HN 1.78 KP 1.06 ! LA 1.02 MK 0.98 OV 0.94 PT 0.90 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.060752Jy sigma=0.500952 ! Fit after self-cal, rms=0.058908Jy sigma=0.452371 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9415 mas, bmaj=1.387 mas, bpa=-9.24 degrees ! Estimated noise=0.508421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141312 Jy ! Component: 100 - total flux cleaned = -0.00275484 Jy ! Component: 150 - total flux cleaned = -0.00377663 Jy ! Component: 200 - total flux cleaned = -0.00407731 Jy ! Total flux subtracted in 200 components = -0.00407731 Jy ! Clean residual min=-0.003122 max=0.002951 Jy/beam ! Clean residual mean=0.000001 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.275485 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.275485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058353Jy sigma=0.446832 ! Fit after self-cal, rms=0.058393Jy sigma=0.446474 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058393Jy sigma=0.446474 ! Fit after self-cal, rms=0.058536Jy sigma=0.439377 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9374 mas, bmaj=1.389 mas, bpa=-8.339 degrees ! Estimated noise=0.506684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196111 Jy ! Component: 100 - total flux cleaned = -0.00276751 Jy ! Component: 150 - total flux cleaned = -0.00350007 Jy ! Component: 200 - total flux cleaned = -0.00374526 Jy ! Total flux subtracted in 200 components = -0.00374526 Jy ! Clean residual min=-0.002117 max=0.001858 Jy/beam ! Clean residual mean=0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.27174 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.27174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058289Jy sigma=0.437006 ! Fit after self-cal, rms=0.058291Jy sigma=0.436896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312761 Jy ! Component: 100 - total flux cleaned = -0.000319035 Jy ! Component: 150 - total flux cleaned = -0.000273563 Jy ! Component: 200 - total flux cleaned = -0.000145004 Jy ! Total flux subtracted in 200 components = -0.000145004 Jy ! Clean residual min=-0.001992 max=0.001743 Jy/beam ! Clean residual mean=0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.271595 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.271595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058217Jy sigma=0.436147 ! Fit after self-cal, rms=0.058213Jy sigma=0.436121 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058213Jy sigma=0.436121 ! Fit after self-cal, rms=0.058628Jy sigma=0.435542 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9377 mas, bmaj=1.389 mas, bpa=-8.29 degrees ! Estimated noise=0.506081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00194858 Jy ! Component: 100 - total flux cleaned = -0.00260885 Jy ! Component: 150 - total flux cleaned = -0.00278596 Jy ! Component: 200 - total flux cleaned = -0.00274335 Jy ! Total flux subtracted in 200 components = -0.00274335 Jy ! Clean residual min=-0.001585 max=0.001460 Jy/beam ! Clean residual mean=0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.268851 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.268851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058528Jy sigma=0.434612 ! Fit after self-cal, rms=0.058529Jy sigma=0.434589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.12951e-05 Jy ! Component: 100 - total flux cleaned = 2.19825e-05 Jy ! Component: 150 - total flux cleaned = 5.34693e-05 Jy ! Component: 200 - total flux cleaned = 2.46175e-05 Jy ! Total flux subtracted in 200 components = 2.46175e-05 Jy ! Clean residual min=-0.001544 max=0.001402 Jy/beam ! Clean residual mean=0.000000 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.268876 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 0.268876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058495Jy sigma=0.434249 ! Fit after self-cal, rms=0.058492Jy sigma=0.434238 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058492Jy sigma=0.434238 ! Fit after self-cal, rms=0.058769Jy sigma=0.433953 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=2.329 mas, bpa=-16.94 degrees ! Estimated noise=0.629443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153917 Jy ! Component: 100 - total flux cleaned = -0.00223073 Jy ! Component: 150 - total flux cleaned = -0.00245806 Jy ! Component: 200 - total flux cleaned = -0.00262287 Jy ! Total flux subtracted in 200 components = -0.00262287 Jy ! Clean residual min=-0.001780 max=0.001415 Jy/beam ! Clean residual mean=0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.266253 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 0.266253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058737Jy sigma=0.433643 ! Fit after self-cal, rms=0.058739Jy sigma=0.433622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033566 Jy ! Component: 100 - total flux cleaned = -0.00039952 Jy ! Component: 150 - total flux cleaned = -0.000412858 Jy ! Component: 200 - total flux cleaned = -0.000425659 Jy ! Total flux subtracted in 200 components = -0.000425659 Jy ! Clean residual min=-0.001716 max=0.001361 Jy/beam ! Clean residual mean=0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.265827 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 117 components and 0.265827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058736Jy sigma=0.433601 ! Fit after self-cal, rms=0.058736Jy sigma=0.433598 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9379 mas, bmaj=1.388 mas, bpa=-8.238 degrees ! Estimated noise=0.505577 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9379 x 1.388 at -8.238 degrees (North through East) ! Clean map min=-0.0013886 max=0.22048 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6999 mas, bmaj=1.089 mas, bpa=-5.934 degrees ! Estimated noise=1.02702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172951 Jy ! Component: 100 - total flux cleaned = 0.211254 Jy ! Component: 150 - total flux cleaned = 0.224332 Jy ! Component: 200 - total flux cleaned = 0.231772 Jy ! Total flux subtracted in 200 components = 0.231772 Jy ! Clean residual min=-0.003119 max=0.004174 Jy/beam ! Clean residual mean=0.000005 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.231772 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.231772 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9379 mas, bmaj=1.388 mas, bpa=-8.238 degrees ! Estimated noise=0.505577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00806466 Jy ! Component: 100 - total flux cleaned = 0.0133632 Jy ! Component: 150 - total flux cleaned = 0.0172785 Jy ! Component: 200 - total flux cleaned = 0.0203619 Jy ! Total flux subtracted in 200 components = 0.0203619 Jy ! Clean residual min=-0.001640 max=0.002145 Jy/beam ! Clean residual mean=0.000004 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.252134 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 57 components and 0.252134 Jy ! Inverting map ! Added new window around map position (-0.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025315 Jy ! Component: 100 - total flux cleaned = 0.00455931 Jy ! Component: 150 - total flux cleaned = 0.00625069 Jy ! Component: 200 - total flux cleaned = 0.00768113 Jy ! Total flux subtracted in 200 components = 0.00768113 Jy ! Clean residual min=-0.001393 max=0.001424 Jy/beam ! Clean residual mean=0.000002 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.259815 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 0.259815 Jy ! Inverting map ! Added new window around map position (1.2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014149 Jy ! Component: 100 - total flux cleaned = 0.002468 Jy ! Component: 150 - total flux cleaned = 0.00311736 Jy ! Component: 200 - total flux cleaned = 0.00366328 Jy ! Total flux subtracted in 200 components = 0.00366328 Jy ! Clean residual min=-0.001248 max=0.001118 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.263478 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 90 components and 0.263478 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=2.329 mas, bpa=-16.94 degrees ! Estimated noise=0.629443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942676 Jy ! Component: 100 - total flux cleaned = 0.00147485 Jy ! Component: 150 - total flux cleaned = 0.0015921 Jy ! Component: 200 - total flux cleaned = 0.00165406 Jy ! Total flux subtracted in 200 components = 0.00165406 Jy ! Clean residual min=-0.001628 max=0.001277 Jy/beam ! Clean residual mean=0.000002 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.265132 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.67524e-05 Jy ! Component: 100 - total flux cleaned = 8.70229e-05 Jy ! Component: 150 - total flux cleaned = 0.000117924 Jy ! Component: 200 - total flux cleaned = 0.000160399 Jy ! Total flux subtracted in 200 components = 0.000160399 Jy ! Clean residual min=-0.001575 max=0.001294 Jy/beam ! Clean residual mean=0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.265293 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 118 components and 0.265293 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9379 mas, bmaj=1.388 mas, bpa=-8.238 degrees ! Estimated noise=0.505577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189499 Jy ! Component: 100 - total flux cleaned = -0.000134826 Jy ! Component: 150 - total flux cleaned = -6.3129e-05 Jy ! Component: 200 - total flux cleaned = -2.0497e-05 Jy ! Total flux subtracted in 200 components = -2.0497e-05 Jy ! Clean residual min=-0.001204 max=0.001051 Jy/beam ! Clean residual mean=0.000000 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.265272 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 0.265272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058695Jy sigma=0.432918 ! Fit after self-cal, rms=0.058684Jy sigma=0.432877 wmodel J0132+4325_X_map.mod ! Writing 131 model components to file: J0132+4325_X_map.mod wobs J0132+4325_X_uvs.fits ! Writing UV FITS file: J0132+4325_X_uvs.fits wwins J0132+4325_X_map.win ! wwins: Wrote 8 windows to J0132+4325_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362623 Jy ! Component: 100 - total flux cleaned = -0.000504497 Jy ! Component: 150 - total flux cleaned = -0.000716466 Jy ! Component: 200 - total flux cleaned = -0.000902319 Jy ! Component: 250 - total flux cleaned = -0.00106373 Jy ! Component: 300 - total flux cleaned = -0.00123826 Jy ! Component: 350 - total flux cleaned = -0.00140913 Jy ! Component: 400 - total flux cleaned = -0.00160996 Jy ! Component: 450 - total flux cleaned = -0.00174114 Jy ! Component: 500 - total flux cleaned = -0.00187006 Jy ! Component: 550 - total flux cleaned = -0.00201211 Jy ! Component: 600 - total flux cleaned = -0.00215169 Jy ! Component: 650 - total flux cleaned = -0.00225842 Jy ! Component: 700 - total flux cleaned = -0.00240817 Jy ! Component: 750 - total flux cleaned = -0.00248175 Jy ! Component: 800 - total flux cleaned = -0.00258337 Jy ! Component: 850 - total flux cleaned = -0.00268294 Jy ! Component: 900 - total flux cleaned = -0.00273919 Jy ! Component: 950 - total flux cleaned = -0.00279475 Jy ! Component: 1000 - total flux cleaned = -0.00287665 Jy ! Component: 1050 - total flux cleaned = -0.00289025 Jy ! Component: 1100 - total flux cleaned = -0.00295686 Jy ! Component: 1150 - total flux cleaned = -0.00297022 Jy ! Component: 1200 - total flux cleaned = -0.00300919 Jy ! Component: 1250 - total flux cleaned = -0.00302192 Jy ! Component: 1300 - total flux cleaned = -0.00303463 Jy ! Component: 1350 - total flux cleaned = -0.00307224 Jy ! Component: 1400 - total flux cleaned = -0.00309692 Jy ! Component: 1450 - total flux cleaned = -0.00308455 Jy ! Component: 1500 - total flux cleaned = -0.00314478 Jy ! Component: 1550 - total flux cleaned = -0.00310891 Jy ! Component: 1600 - total flux cleaned = -0.00314432 Jy ! Component: 1650 - total flux cleaned = -0.00313259 Jy ! Component: 1700 - total flux cleaned = -0.00316754 Jy ! Component: 1750 - total flux cleaned = -0.0032021 Jy ! Component: 1800 - total flux cleaned = -0.00320206 Jy ! Component: 1850 - total flux cleaned = -0.00322468 Jy ! Component: 1900 - total flux cleaned = -0.00323598 Jy ! Component: 1950 - total flux cleaned = -0.00322495 Jy ! Component: 2000 - total flux cleaned = -0.00321404 Jy ! Component: 2050 - total flux cleaned = -0.00321413 Jy ! Component: 2100 - total flux cleaned = -0.0032465 Jy ! Component: 2150 - total flux cleaned = -0.00327863 Jy ! Component: 2200 - total flux cleaned = -0.00329996 Jy ! Component: 2250 - total flux cleaned = -0.00335261 Jy ! Component: 2300 - total flux cleaned = -0.00338393 Jy ! Component: 2350 - total flux cleaned = -0.00339424 Jy ! Component: 2400 - total flux cleaned = -0.00345596 Jy ! Component: 2450 - total flux cleaned = -0.00350702 Jy ! Component: 2500 - total flux cleaned = -0.00352727 Jy ! Component: 2550 - total flux cleaned = -0.00355734 Jy ! Component: 2600 - total flux cleaned = -0.00359709 Jy ! Component: 2650 - total flux cleaned = -0.00362668 Jy ! Component: 2700 - total flux cleaned = -0.00361692 Jy ! Component: 2750 - total flux cleaned = -0.00366557 Jy ! Component: 2800 - total flux cleaned = -0.00372362 Jy ! Component: 2850 - total flux cleaned = -0.00374276 Jy ! Component: 2900 - total flux cleaned = -0.0037713 Jy ! Component: 2950 - total flux cleaned = -0.00378065 Jy ! Component: 3000 - total flux cleaned = -0.00378059 Jy ! Component: 3050 - total flux cleaned = -0.0037806 Jy ! Component: 3100 - total flux cleaned = -0.00383632 Jy ! Component: 3150 - total flux cleaned = -0.00383642 Jy ! Component: 3200 - total flux cleaned = -0.00382711 Jy ! Component: 3250 - total flux cleaned = -0.00381791 Jy ! Component: 3300 - total flux cleaned = -0.00384507 Jy ! Component: 3350 - total flux cleaned = -0.00386311 Jy ! Component: 3400 - total flux cleaned = -0.00384522 Jy ! Component: 3450 - total flux cleaned = -0.00382735 Jy ! Component: 3500 - total flux cleaned = -0.00380972 Jy ! Component: 3550 - total flux cleaned = -0.00386254 Jy ! Component: 3600 - total flux cleaned = -0.00385377 Jy ! Component: 3650 - total flux cleaned = -0.00387984 Jy ! Component: 3700 - total flux cleaned = -0.00388846 Jy ! Component: 3750 - total flux cleaned = -0.0038627 Jy ! Component: 3800 - total flux cleaned = -0.00387139 Jy ! Component: 3850 - total flux cleaned = -0.00389696 Jy ! Component: 3900 - total flux cleaned = -0.00388848 Jy ! Component: 3950 - total flux cleaned = -0.0039053 Jy ! Component: 4000 - total flux cleaned = -0.00391362 Jy ! Component: 4050 - total flux cleaned = -0.00390534 Jy ! Total flux subtracted in 4096 components = -0.00394676 Jy ! Clean residual min=-0.000509 max=0.000469 Jy/beam ! Clean residual mean=-0.000000 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.261326 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 457 components and 0.261326 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0132+4325_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9379 x 1.388 at -8.238 degrees (North through East) ! Clean map min=-0.00085831 max=0.2219 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0132+4325_X_map.fits wmodel /image_prod/ug002_uva//J0132+4325_X_map.mod ! Writing 457 model components to file: /image_prod/ug002_uva//J0132+4325_X_map.mod wobs /image_prod/ug002_uva//J0132+4325_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0132+4325_X_uvs.fits wwins /image_prod/ug002_uva//J0132+4325_X_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0132+4325_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.221899 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00014177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.191668 0.191668 0.383336 0.766673 1.53335 3.06669 6.13338 12.2668 24.5335 49.0671 98.1341 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.221 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1565.2 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0132+4325_X_dfm.log closed on Wed Mar 4 19:06:01 2020