! Started logfile: /image_prod/ug002_uva//J0131+3834_X_dfm.log on Wed Mar 4 19:05:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0131+3834_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0131+3834_X_uva.fits ! AN table 1: 20 integrations on 21 of 21 possible baselines. ! AN table 2: 20 integrations on 28 of 28 possible baselines. ! AN table 3: 20 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.974675 visibilities/baseline/integration-bin. ! Found source: J0131+3834 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 18012 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0131+3834_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.050168Jy sigma=8.844655 ! Fit after self-cal, rms=0.659768Jy sigma=5.614910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6513 mas, bmaj=1.279 mas, bpa=-11.12 degrees ! Estimated noise=1.2697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264109 Jy ! Component: 100 - total flux cleaned = 0.321857 Jy ! Total flux subtracted in 100 components = 0.321857 Jy ! Clean residual min=-0.013928 max=0.017478 Jy/beam ! Clean residual mean=-0.000001 rms=0.002575 Jy/beam ! Combined flux in latest and established models = 0.321857 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.321857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071978Jy sigma=0.575604 ! Fit after self-cal, rms=0.071974Jy sigma=0.575581 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174143 Jy ! Component: 100 - total flux cleaned = 0.0237626 Jy ! Total flux subtracted in 100 components = 0.0237626 Jy ! Clean residual min=-0.013893 max=0.012521 Jy/beam ! Clean residual mean=0.000000 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 0.345619 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.345619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067569Jy sigma=0.547296 ! Fit after self-cal, rms=0.067565Jy sigma=0.547250 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8325 mas, bmaj=1.51 mas, bpa=-8.279 degrees ! Estimated noise=0.632523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034661 Jy ! Component: 100 - total flux cleaned = -0.001331 Jy ! Component: 150 - total flux cleaned = -0.002175 Jy ! Component: 200 - total flux cleaned = -0.00272856 Jy ! Total flux subtracted in 200 components = -0.00272856 Jy ! Clean residual min=-0.011331 max=0.012957 Jy/beam ! Clean residual mean=-0.000003 rms=0.002450 Jy/beam ! Combined flux in latest and established models = 0.342891 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.342891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067113Jy sigma=0.545086 ! Fit after self-cal, rms=0.067109Jy sigma=0.545075 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8325 x 1.51 at -8.279 degrees (North through East) ! Clean map min=-0.010594 max=0.34137 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.87 KP 1.04 LA 1.02 ! NL 1.16 OV 0.88 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 HN 0.84 KP 1.04 MK 1.00 ! NL 1.19 OV 0.89 PT 0.89 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 0.87 KP 1.04 LA 1.04 ! MK 1.01 NL 1.15 PT 0.91 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.86 KP 1.03 LA 1.01 ! NL 1.16 OV 0.90 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.86 KP 1.05 MK 1.03 ! NL 1.16 OV 0.88 PT 0.91 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 HN 0.85 KP 1.05 LA 1.05 ! MK 1.02 NL 1.18 PT 0.92 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.86 KP 1.03 LA 1.03 ! NL 1.19 OV 0.89 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 HN 0.87 KP 1.04 MK 1.00 ! NL 1.17 OV 0.90 PT 0.91 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 HN 0.87 KP 1.06 LA 1.06 ! MK 1.00 NL 1.19 PT 0.91 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.88 KP 1.05 LA 1.04 ! NL 1.17 OV 0.88 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.87 KP 1.06 MK 1.01 ! NL 1.18 OV 0.90 PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 HN 0.86 KP 1.07 LA 1.06 ! MK 1.01 NL 1.19 PT 0.92 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.88 KP 1.04 LA 1.04 ! NL 1.16 OV 0.89 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 0.86 KP 1.05 MK 1.00 ! NL 1.17 OV 0.90 PT 0.91 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 0.88 KP 1.05 LA 1.07 ! MK 1.00 NL 1.15 PT 0.92 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.88 KP 1.05 LA 1.03 ! NL 1.19 OV 0.89 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.85 KP 1.05 MK 1.04 ! NL 1.17 OV 0.90 PT 0.95 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 HN 0.88 KP 1.06 LA 1.06 ! MK 1.03 NL 1.18 PT 0.91 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.90 KP 1.04 LA 1.01 ! NL 1.19 OV 0.89 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 0.87 KP 1.02 MK 1.05 ! NL 1.19 OV 0.90 PT 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 0.92 KP 1.05 LA 1.04 ! MK 1.06 NL 1.16 PT 0.91 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.89 KP 1.05 LA 1.03 ! NL 1.18 OV 0.88 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.90 KP 1.05 MK 1.08 ! NL 1.20 OV 0.88 PT 0.92 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 0.88 KP 1.07 LA 1.05 ! MK 1.05 NL 1.18 PT 0.91 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.90 KP 1.03 LA 1.03 ! NL 1.18 OV 0.87 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 HN 0.89 KP 1.04 MK 1.07 ! NL 1.19 OV 0.89 PT 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 0.89 KP 1.02 LA 1.07 ! MK 1.07 NL 1.18 PT 0.92 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.88 KP 1.04 LA 1.03 ! NL 1.18 OV 0.89 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 HN 0.89 KP 1.03 MK 1.06 ! NL 1.18 OV 0.92 PT 0.92 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 0.86 KP 1.06 LA 1.06 ! MK 1.06 NL 1.20 PT 0.92 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.91 KP 1.06 LA 1.05 ! NL 1.19 OV 0.87 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 HN 0.89 KP 1.04 MK 1.08 ! NL 1.20 OV 0.88 PT 0.93 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 0.91 KP 1.07 LA 1.04 ! MK 1.04 NL 1.18 PT 0.92 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.89 KP 1.03 LA 1.02 ! NL 1.21 OV 0.86 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 0.85 KP 1.04 MK 1.15 ! NL 1.16 OV 0.88 PT 0.93 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 0.87 KP 1.05 LA 1.04 ! MK 1.08 NL 1.20 PT 0.93 SC 1.07 ! ! ! Fit before self-cal, rms=0.067109Jy sigma=0.545075 ! Fit after self-cal, rms=0.051181Jy sigma=0.412944 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8363 mas, bmaj=1.502 mas, bpa=-8.125 degrees ! Estimated noise=0.63069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151943 Jy ! Component: 100 - total flux cleaned = 0.00235542 Jy ! Component: 150 - total flux cleaned = 0.00256072 Jy ! Component: 200 - total flux cleaned = 0.00269567 Jy ! Total flux subtracted in 200 components = 0.00269567 Jy ! Clean residual min=-0.001544 max=0.001857 Jy/beam ! Clean residual mean=-0.000002 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.345586 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.345586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051131Jy sigma=0.412495 ! Fit after self-cal, rms=0.051155Jy sigma=0.412276 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051155Jy sigma=0.412276 ! Fit after self-cal, rms=0.051145Jy sigma=0.412185 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8356 mas, bmaj=1.502 mas, bpa=-8.134 degrees ! Estimated noise=0.631175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000875551 Jy ! Component: 100 - total flux cleaned = 0.00142449 Jy ! Component: 150 - total flux cleaned = 0.00163049 Jy ! Component: 200 - total flux cleaned = 0.00174556 Jy ! Total flux subtracted in 200 components = 0.00174556 Jy ! Clean residual min=-0.001477 max=0.001804 Jy/beam ! Clean residual mean=-0.000002 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.347332 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.347332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051126Jy sigma=0.412004 ! Fit after self-cal, rms=0.051125Jy sigma=0.412001 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.4, -13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188663 Jy ! Component: 100 - total flux cleaned = 0.00306845 Jy ! Component: 150 - total flux cleaned = 0.00396438 Jy ! Component: 200 - total flux cleaned = 0.00466436 Jy ! Total flux subtracted in 200 components = 0.00466436 Jy ! Clean residual min=-0.001289 max=0.001420 Jy/beam ! Clean residual mean=-0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.351996 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 45 components and 0.351996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051046Jy sigma=0.411237 ! Fit after self-cal, rms=0.051038Jy sigma=0.411166 ! Inverting map ! Added new window around map position (16, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127682 Jy ! Component: 100 - total flux cleaned = 0.00184962 Jy ! Component: 150 - total flux cleaned = 0.00225115 Jy ! Component: 200 - total flux cleaned = 0.00255473 Jy ! Total flux subtracted in 200 components = 0.00255473 Jy ! Clean residual min=-0.001211 max=0.001194 Jy/beam ! Clean residual mean=-0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.354551 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.354551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050999Jy sigma=0.410822 ! Fit after self-cal, rms=0.050996Jy sigma=0.410799 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050996Jy sigma=0.410799 ! Fit after self-cal, rms=0.050968Jy sigma=0.410705 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8351 mas, bmaj=1.502 mas, bpa=-8.115 degrees ! Estimated noise=0.631393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718218 Jy ! Component: 100 - total flux cleaned = 0.00110794 Jy ! Component: 150 - total flux cleaned = 0.00144547 Jy ! Component: 200 - total flux cleaned = 0.00171101 Jy ! Total flux subtracted in 200 components = 0.00171101 Jy ! Clean residual min=-0.001137 max=0.001120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.356262 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 70 components and 0.356262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050951Jy sigma=0.410558 ! Fit after self-cal, rms=0.050950Jy sigma=0.410550 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329101 Jy ! Component: 100 - total flux cleaned = 0.000530594 Jy ! Component: 150 - total flux cleaned = 0.000729984 Jy ! Component: 200 - total flux cleaned = 0.000925866 Jy ! Total flux subtracted in 200 components = 0.000925866 Jy ! Clean residual min=-0.001117 max=0.001125 Jy/beam ! Clean residual mean=-0.000001 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.357188 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 77 components and 0.357188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050942Jy sigma=0.410486 ! Fit after self-cal, rms=0.050942Jy sigma=0.410484 ! Inverting map ! Added new window around map position (2, 13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352727 Jy ! Component: 100 - total flux cleaned = 0.000427019 Jy ! Component: 150 - total flux cleaned = 0.000487861 Jy ! Component: 200 - total flux cleaned = 0.000623368 Jy ! Total flux subtracted in 200 components = 0.000623368 Jy ! Clean residual min=-0.001058 max=0.001020 Jy/beam ! Clean residual mean=-0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.357811 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.357811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050916Jy sigma=0.410246 ! Fit after self-cal, rms=0.050915Jy sigma=0.410241 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050915Jy sigma=0.410241 ! Fit after self-cal, rms=0.050913Jy sigma=0.410218 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.931 mas, bmaj=2.335 mas, bpa=-7.468 degrees ! Estimated noise=0.837303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000632599 Jy ! Component: 100 - total flux cleaned = 0.0010311 Jy ! Component: 150 - total flux cleaned = 0.00139911 Jy ! Component: 200 - total flux cleaned = 0.00171457 Jy ! Total flux subtracted in 200 components = 0.00171457 Jy ! Clean residual min=-0.001216 max=0.001189 Jy/beam ! Clean residual mean=-0.000002 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.359526 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.359526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050909Jy sigma=0.410182 ! Fit after self-cal, rms=0.050908Jy sigma=0.410164 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442606 Jy ! Component: 100 - total flux cleaned = 0.000623765 Jy ! Component: 150 - total flux cleaned = 0.000722017 Jy ! Component: 200 - total flux cleaned = 0.000789296 Jy ! Total flux subtracted in 200 components = 0.000789296 Jy ! Clean residual min=-0.001120 max=0.001205 Jy/beam ! Clean residual mean=-0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.360315 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 108 components and 0.360315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050909Jy sigma=0.410176 ! Fit after self-cal, rms=0.050909Jy sigma=0.410171 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=1.502 mas, bpa=-8.118 degrees ! Estimated noise=0.631467 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8349 x 1.502 at -8.118 degrees (North through East) ! Clean map min=-0.00087775 max=0.34006 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6555 mas, bmaj=1.273 mas, bpa=-10.97 degrees ! Estimated noise=1.26296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2627 Jy ! Component: 100 - total flux cleaned = 0.319986 Jy ! Component: 150 - total flux cleaned = 0.336044 Jy ! Component: 200 - total flux cleaned = 0.343158 Jy ! Total flux subtracted in 200 components = 0.343158 Jy ! Clean residual min=-0.002738 max=0.003234 Jy/beam ! Clean residual mean=-0.000000 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.343158 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.343158 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=1.502 mas, bpa=-8.118 degrees ! Estimated noise=0.631467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430804 Jy ! Component: 100 - total flux cleaned = 0.00682338 Jy ! Component: 150 - total flux cleaned = 0.00835283 Jy ! Component: 200 - total flux cleaned = 0.0095752 Jy ! Total flux subtracted in 200 components = 0.0095752 Jy ! Clean residual min=-0.001306 max=0.001353 Jy/beam ! Clean residual mean=-0.000001 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.352733 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 28 components and 0.352733 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.931 mas, bmaj=2.335 mas, bpa=-7.468 degrees ! Estimated noise=0.837303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243585 Jy ! Component: 100 - total flux cleaned = 0.00399303 Jy ! Component: 150 - total flux cleaned = 0.00516202 Jy ! Component: 200 - total flux cleaned = 0.00608831 Jy ! Total flux subtracted in 200 components = 0.00608831 Jy ! Clean residual min=-0.001442 max=0.001327 Jy/beam ! Clean residual mean=-0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.358821 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614845 Jy ! Component: 100 - total flux cleaned = 0.00110795 Jy ! Component: 150 - total flux cleaned = 0.00153107 Jy ! Component: 200 - total flux cleaned = 0.00187823 Jy ! Total flux subtracted in 200 components = 0.00187823 Jy ! Clean residual min=-0.001266 max=0.001241 Jy/beam ! Clean residual mean=-0.000001 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.360699 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 80 components and 0.3607 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=1.502 mas, bpa=-8.118 degrees ! Estimated noise=0.631467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134989 Jy ! Component: 100 - total flux cleaned = 0.000379439 Jy ! Component: 150 - total flux cleaned = 0.000521288 Jy ! Component: 200 - total flux cleaned = 0.000668396 Jy ! Total flux subtracted in 200 components = 0.000668396 Jy ! Clean residual min=-0.001018 max=0.001026 Jy/beam ! Clean residual mean=-0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.361368 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.361368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050929Jy sigma=0.410335 ! Fit after self-cal, rms=0.050928Jy sigma=0.410320 wmodel J0131+3834_X_map.mod ! Writing 93 model components to file: J0131+3834_X_map.mod wobs J0131+3834_X_uvs.fits ! Writing UV FITS file: J0131+3834_X_uvs.fits wwins J0131+3834_X_map.win ! wwins: Wrote 4 windows to J0131+3834_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154736 Jy ! Component: 100 - total flux cleaned = -0.000190716 Jy ! Component: 150 - total flux cleaned = -0.000225395 Jy ! Component: 200 - total flux cleaned = -0.000258934 Jy ! Component: 250 - total flux cleaned = -0.000291337 Jy ! Component: 300 - total flux cleaned = -0.00027556 Jy ! Component: 350 - total flux cleaned = -0.000291051 Jy ! Component: 400 - total flux cleaned = -0.000336276 Jy ! Component: 450 - total flux cleaned = -0.000365643 Jy ! Component: 500 - total flux cleaned = -0.000351294 Jy ! Component: 550 - total flux cleaned = -0.000408314 Jy ! Component: 600 - total flux cleaned = -0.000394069 Jy ! Component: 650 - total flux cleaned = -0.000380575 Jy ! Component: 700 - total flux cleaned = -0.000434314 Jy ! Component: 750 - total flux cleaned = -0.000513583 Jy ! Component: 800 - total flux cleaned = -0.000539824 Jy ! Component: 850 - total flux cleaned = -0.000629509 Jy ! Component: 900 - total flux cleaned = -0.000642341 Jy ! Component: 950 - total flux cleaned = -0.000767174 Jy ! Component: 1000 - total flux cleaned = -0.000803968 Jy ! Component: 1050 - total flux cleaned = -0.000901164 Jy ! Component: 1100 - total flux cleaned = -0.000973137 Jy ! Component: 1150 - total flux cleaned = -0.00100866 Jy ! Component: 1200 - total flux cleaned = -0.00107911 Jy ! Component: 1250 - total flux cleaned = -0.001172 Jy ! Component: 1300 - total flux cleaned = -0.00124073 Jy ! Component: 1350 - total flux cleaned = -0.00129723 Jy ! Component: 1400 - total flux cleaned = -0.00129709 Jy ! Component: 1450 - total flux cleaned = -0.00131949 Jy ! Component: 1500 - total flux cleaned = -0.00140732 Jy ! Component: 1550 - total flux cleaned = -0.00139643 Jy ! Component: 1600 - total flux cleaned = -0.00147175 Jy ! Component: 1650 - total flux cleaned = -0.00152493 Jy ! Component: 1700 - total flux cleaned = -0.00158809 Jy ! Component: 1750 - total flux cleaned = -0.00162975 Jy ! Component: 1800 - total flux cleaned = -0.00166088 Jy ! Component: 1850 - total flux cleaned = -0.00172225 Jy ! Component: 1900 - total flux cleaned = -0.00177292 Jy ! Component: 1950 - total flux cleaned = -0.00185335 Jy ! Component: 2000 - total flux cleaned = -0.00190316 Jy ! Component: 2050 - total flux cleaned = -0.00195242 Jy ! Component: 2100 - total flux cleaned = -0.00202093 Jy ! Component: 2150 - total flux cleaned = -0.00205 Jy ! Component: 2200 - total flux cleaned = -0.00210779 Jy ! Component: 2250 - total flux cleaned = -0.00215546 Jy ! Component: 2300 - total flux cleaned = -0.0021744 Jy ! Component: 2350 - total flux cleaned = -0.00223077 Jy ! Component: 2400 - total flux cleaned = -0.00228651 Jy ! Component: 2450 - total flux cleaned = -0.00230493 Jy ! Component: 2500 - total flux cleaned = -0.00235992 Jy ! Component: 2550 - total flux cleaned = -0.00241436 Jy ! Component: 2600 - total flux cleaned = -0.00243247 Jy ! Component: 2650 - total flux cleaned = -0.00246825 Jy ! Component: 2700 - total flux cleaned = -0.00246825 Jy ! Component: 2750 - total flux cleaned = -0.00252112 Jy ! Component: 2800 - total flux cleaned = -0.00253863 Jy ! Component: 2850 - total flux cleaned = -0.00253865 Jy ! Component: 2900 - total flux cleaned = -0.00253866 Jy ! Component: 2950 - total flux cleaned = -0.00259011 Jy ! Component: 3000 - total flux cleaned = -0.00253906 Jy ! Component: 3050 - total flux cleaned = -0.00256439 Jy ! Component: 3100 - total flux cleaned = -0.0025475 Jy ! Component: 3150 - total flux cleaned = -0.0025642 Jy ! Component: 3200 - total flux cleaned = -0.00254757 Jy ! Component: 3250 - total flux cleaned = -0.00254761 Jy ! Component: 3300 - total flux cleaned = -0.00257214 Jy ! Component: 3350 - total flux cleaned = -0.00251514 Jy ! Component: 3400 - total flux cleaned = -0.00253137 Jy ! Component: 3450 - total flux cleaned = -0.00250726 Jy ! Component: 3500 - total flux cleaned = -0.00249125 Jy ! Component: 3550 - total flux cleaned = -0.00247546 Jy ! Component: 3600 - total flux cleaned = -0.00247552 Jy ! Component: 3650 - total flux cleaned = -0.00248344 Jy ! Component: 3700 - total flux cleaned = -0.00249901 Jy ! Component: 3750 - total flux cleaned = -0.00250679 Jy ! Component: 3800 - total flux cleaned = -0.00252223 Jy ! Component: 3850 - total flux cleaned = -0.00256834 Jy ! Component: 3900 - total flux cleaned = -0.00254541 Jy ! Component: 3950 - total flux cleaned = -0.00252262 Jy ! Component: 4000 - total flux cleaned = -0.00256792 Jy ! Component: 4050 - total flux cleaned = -0.00251526 Jy ! Total flux subtracted in 4096 components = -0.00253767 Jy ! Clean residual min=-0.000439 max=0.000548 Jy/beam ! Clean residual mean=0.000000 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.35883 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 411 components and 0.35883 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0131+3834_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8349 x 1.502 at -8.118 degrees (North through East) ! Clean map min=-0.00088498 max=0.3394 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0131+3834_X_map.fits wmodel /image_prod/ug002_uva//J0131+3834_X_map.mod ! Writing 411 model components to file: /image_prod/ug002_uva//J0131+3834_X_map.mod wobs /image_prod/ug002_uva//J0131+3834_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0131+3834_X_uvs.fits wwins /image_prod/ug002_uva//J0131+3834_X_map.win ! wwins: Wrote 5 windows to /image_prod/ug002_uva//J0131+3834_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.339405 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000122728 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.108479 0.108479 0.216958 0.433917 0.867834 1.73567 3.47133 6.94267 13.8853 27.7707 55.5414 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.339 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2765.51 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0131+3834_X_dfm.log closed on Wed Mar 4 19:05:50 2020