! Started logfile: /image_prod/ug002_uva//J0128+4901_X_dfm.log on Wed Mar 4 19:04:48 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0128+4901_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0128+4901_X_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! AN table 2: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.890278 visibilities/baseline/integration-bin. ! Found source: J0128+4901 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23076 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0128+4901_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.209697Jy sigma=8.321599 ! Fit after self-cal, rms=0.357193Jy sigma=2.511341 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6798 mas, bmaj=1.031 mas, bpa=-13.1 degrees ! Estimated noise=1.40804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.485178 Jy ! Component: 100 - total flux cleaned = 0.619817 Jy ! Total flux subtracted in 100 components = 0.619817 Jy ! Clean residual min=-0.023985 max=0.056050 Jy/beam ! Clean residual mean=0.000049 rms=0.005385 Jy/beam ! Combined flux in latest and established models = 0.619817 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.619817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139668Jy sigma=0.931019 ! Fit after self-cal, rms=0.139601Jy sigma=0.930521 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583882 Jy ! Component: 100 - total flux cleaned = 0.085776 Jy ! Total flux subtracted in 100 components = 0.085776 Jy ! Clean residual min=-0.020787 max=0.037422 Jy/beam ! Clean residual mean=0.000022 rms=0.004026 Jy/beam ! Combined flux in latest and established models = 0.705593 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 7 components and 0.705593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104960Jy sigma=0.701101 ! Fit after self-cal, rms=0.104897Jy sigma=0.700654 ! Inverting map ! Added new window around map position (1.4, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334579 Jy ! Component: 100 - total flux cleaned = 0.0479466 Jy ! Total flux subtracted in 100 components = 0.0479466 Jy ! Clean residual min=-0.017383 max=0.029902 Jy/beam ! Clean residual mean=0.000013 rms=0.003430 Jy/beam ! Combined flux in latest and established models = 0.753539 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.753539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094450Jy sigma=0.628722 ! Fit after self-cal, rms=0.093147Jy sigma=0.618942 ! Inverting map ! Added new window around map position (-1.4, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227783 Jy ! Component: 100 - total flux cleaned = 0.036079 Jy ! Total flux subtracted in 100 components = 0.036079 Jy ! Clean residual min=-0.014658 max=0.016974 Jy/beam ! Clean residual mean=0.000004 rms=0.003020 Jy/beam ! Combined flux in latest and established models = 0.789618 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.789618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087682Jy sigma=0.580779 ! Fit after self-cal, rms=0.087389Jy sigma=0.578843 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8897 mas, bmaj=1.288 mas, bpa=-13.05 degrees ! Estimated noise=0.688381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.6, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124294 Jy ! Component: 100 - total flux cleaned = 0.0198197 Jy ! Component: 150 - total flux cleaned = 0.0246089 Jy ! Component: 200 - total flux cleaned = 0.0273115 Jy ! Total flux subtracted in 200 components = 0.0273115 Jy ! Clean residual min=-0.014723 max=0.016244 Jy/beam ! Clean residual mean=0.000019 rms=0.003132 Jy/beam ! Combined flux in latest and established models = 0.81693 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 43 components and 0.81693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082057Jy sigma=0.543707 ! Fit after self-cal, rms=0.081785Jy sigma=0.541825 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8897 x 1.288 at -13.05 degrees (North through East) ! Clean map min=-0.013904 max=0.64376 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.94 KP 1.05 ! LA 1.02 MK 1.00 NL 1.06 OV 0.94 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.04 HN 1.25 KP 1.05 ! LA 1.04 MK 1.04 OV 0.91 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.91 KP 1.06 ! LA 1.03 MK 1.01 NL 1.04 OV 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.02 HN 1.24 KP 1.04 ! LA 1.03 MK 1.05 OV 0.92 PT 0.94 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.92 KP 1.05 ! LA 1.03 MK 1.02 NL 1.05 OV 0.94 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.03 HN 1.24 KP 1.04 ! LA 1.02 MK 1.06 OV 0.91 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 1.05 ! LA 1.00 MK 0.99 NL 1.06 OV 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 1.22 KP 1.04 ! LA 1.01 MK 1.03 OV 0.91 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.92 KP 1.03 ! LA 0.99 MK 1.02 NL 1.04 OV 0.94 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.02 HN 1.21 KP 1.02 ! LA 1.00 MK 1.05 OV 0.93 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.94 KP 1.04 ! LA 1.01 MK 1.01 NL 1.05 OV 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.03 HN 1.26 KP 1.03 ! LA 1.01 MK 1.05 OV 0.92 PT 0.90 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.93 KP 1.03 ! LA 1.01 MK 1.02 NL 1.03 OV 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.04 HN 1.25 KP 1.03 ! LA 1.02 MK 1.06 OV 0.91 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.94 KP 1.03 ! LA 1.01 MK 1.00 NL 1.06 OV 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.05 HN 1.22 KP 1.02 ! LA 1.02 MK 1.06 OV 0.90 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.93 KP 1.02 ! LA 0.99 MK 0.99 NL 1.06 OV 0.95 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.02 HN 1.23 KP 1.01 ! LA 1.01 MK 1.03 OV 0.93 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.93 KP 1.02 ! LA 1.01 MK 1.01 NL 1.03 OV 0.95 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.04 HN 1.21 KP 1.02 ! LA 1.03 MK 1.06 OV 0.92 PT 0.89 ! SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.93 KP 1.04 ! LA 1.01 MK 1.02 NL 1.03 OV 0.93 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.02 HN 1.23 KP 1.03 ! LA 1.02 MK 1.05 OV 0.91 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.94 KP 1.03 ! LA 1.01 MK 1.01 NL 1.02 OV 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.03 HN 1.27 KP 1.02 ! LA 1.01 MK 1.05 OV 0.91 PT 0.89 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.081785Jy sigma=0.541825 ! Fit after self-cal, rms=0.062354Jy sigma=0.402968 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8958 mas, bmaj=1.285 mas, bpa=-14.15 degrees ! Estimated noise=0.689357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0091754 Jy ! Component: 100 - total flux cleaned = -0.0119536 Jy ! Component: 150 - total flux cleaned = -0.0140569 Jy ! Component: 200 - total flux cleaned = -0.0153638 Jy ! Total flux subtracted in 200 components = -0.0153638 Jy ! Clean residual min=-0.006262 max=0.006935 Jy/beam ! Clean residual mean=0.000007 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.801566 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.801566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060122Jy sigma=0.388139 ! Fit after self-cal, rms=0.060057Jy sigma=0.387556 ! Inverting map ! Added new window around map position (-1.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203371 Jy ! Component: 100 - total flux cleaned = 0.000298354 Jy ! Component: 150 - total flux cleaned = -0.000453169 Jy ! Component: 200 - total flux cleaned = -0.00111345 Jy ! Total flux subtracted in 200 components = -0.00111345 Jy ! Clean residual min=-0.006359 max=0.006366 Jy/beam ! Clean residual mean=0.000006 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.800452 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 0.800453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059058Jy sigma=0.381188 ! Fit after self-cal, rms=0.059016Jy sigma=0.380874 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059016Jy sigma=0.380874 ! Fit after self-cal, rms=0.057567Jy sigma=0.367523 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8954 mas, bmaj=1.286 mas, bpa=-13.53 degrees ! Estimated noise=0.690255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00638779 Jy ! Component: 100 - total flux cleaned = -0.00841179 Jy ! Component: 150 - total flux cleaned = -0.00942657 Jy ! Component: 200 - total flux cleaned = -0.00987479 Jy ! Total flux subtracted in 200 components = -0.00987479 Jy ! Clean residual min=-0.004371 max=0.004114 Jy/beam ! Clean residual mean=0.000003 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.790578 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.790578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056590Jy sigma=0.361640 ! Fit after self-cal, rms=0.056577Jy sigma=0.361501 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103485 Jy ! Component: 100 - total flux cleaned = -0.00122271 Jy ! Component: 150 - total flux cleaned = -0.00131044 Jy ! Component: 200 - total flux cleaned = -0.00146537 Jy ! Total flux subtracted in 200 components = -0.00146537 Jy ! Clean residual min=-0.004123 max=0.004034 Jy/beam ! Clean residual mean=0.000003 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.789112 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 98 components and 0.789113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056300Jy sigma=0.359928 ! Fit after self-cal, rms=0.056295Jy sigma=0.359888 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056295Jy sigma=0.359888 ! Fit after self-cal, rms=0.056109Jy sigma=0.357839 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8949 mas, bmaj=1.285 mas, bpa=-13.47 degrees ! Estimated noise=0.68977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00444085 Jy ! Component: 100 - total flux cleaned = -0.00628735 Jy ! Component: 150 - total flux cleaned = -0.00671432 Jy ! Component: 200 - total flux cleaned = -0.00693769 Jy ! Total flux subtracted in 200 components = -0.00693769 Jy ! Clean residual min=-0.003568 max=0.003228 Jy/beam ! Clean residual mean=0.000002 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.782175 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.782175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055635Jy sigma=0.355137 ! Fit after self-cal, rms=0.055629Jy sigma=0.355085 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000602661 Jy ! Component: 100 - total flux cleaned = -0.000542562 Jy ! Component: 150 - total flux cleaned = -0.000540182 Jy ! Component: 200 - total flux cleaned = -0.00048362 Jy ! Total flux subtracted in 200 components = -0.00048362 Jy ! Clean residual min=-0.003344 max=0.003221 Jy/beam ! Clean residual mean=0.000001 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.781691 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.781691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055500Jy sigma=0.354394 ! Fit after self-cal, rms=0.055497Jy sigma=0.354379 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055497Jy sigma=0.354379 ! Fit after self-cal, rms=0.055378Jy sigma=0.353194 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.173 mas, bmaj=2.381 mas, bpa=-42.22 degrees ! Estimated noise=0.928726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322849 Jy ! Component: 100 - total flux cleaned = -0.00457733 Jy ! Component: 150 - total flux cleaned = -0.00518963 Jy ! Component: 200 - total flux cleaned = -0.00565643 Jy ! Total flux subtracted in 200 components = -0.00565643 Jy ! Clean residual min=-0.003102 max=0.002860 Jy/beam ! Clean residual mean=0.000003 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.776035 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 125 components and 0.776035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055243Jy sigma=0.352404 ! Fit after self-cal, rms=0.055237Jy sigma=0.352328 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000551759 Jy ! Component: 100 - total flux cleaned = -0.00105348 Jy ! Component: 150 - total flux cleaned = -0.00130558 Jy ! Component: 200 - total flux cleaned = -0.00143707 Jy ! Total flux subtracted in 200 components = -0.00143707 Jy ! Clean residual min=-0.002974 max=0.002718 Jy/beam ! Clean residual mean=0.000003 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.774598 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.774598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055209Jy sigma=0.352250 ! Fit after self-cal, rms=0.055206Jy sigma=0.352232 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8943 mas, bmaj=1.284 mas, bpa=-13.44 degrees ! Estimated noise=0.689333 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8943 x 1.284 at -13.44 degrees (North through East) ! Clean map min=-0.0033891 max=0.64718 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055206Jy sigma=0.352232 ! Fit after self-cal, rms=0.051246Jy sigma=0.322135 ! Inverting map and beam ! Estimated beam: bmin=0.8942 mas, bmaj=1.284 mas, bpa=-13.4 degrees ! Estimated noise=0.689246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266484 Jy ! Component: 100 - total flux cleaned = -0.00333323 Jy ! Component: 150 - total flux cleaned = -0.00327095 Jy ! Component: 200 - total flux cleaned = -0.00332583 Jy ! Total flux subtracted in 200 components = -0.00332583 Jy ! Clean residual min=-0.002705 max=0.002762 Jy/beam ! Clean residual mean=0.000001 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.771272 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.771272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051007Jy sigma=0.320788 ! Fit after self-cal, rms=0.051002Jy sigma=0.320771 ! Inverting map ! Added new window around map position (9.6, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107464 Jy ! Component: 100 - total flux cleaned = 0.000811369 Jy ! Component: 150 - total flux cleaned = 0.000642071 Jy ! Component: 200 - total flux cleaned = 0.000436337 Jy ! Total flux subtracted in 200 components = 0.000436337 Jy ! Clean residual min=-0.002418 max=0.002344 Jy/beam ! Clean residual mean=0.000002 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.771708 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.771708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050800Jy sigma=0.319568 ! Fit after self-cal, rms=0.050794Jy sigma=0.319524 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050794Jy sigma=0.319524 ! Fit after self-cal, rms=0.050741Jy sigma=0.319131 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6793 mas, bmaj=1.026 mas, bpa=-13.19 degrees ! Estimated noise=1.41558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.487695 Jy ! Component: 100 - total flux cleaned = 0.624335 Jy ! Component: 150 - total flux cleaned = 0.683474 Jy ! Component: 200 - total flux cleaned = 0.710529 Jy ! Total flux subtracted in 200 components = 0.710529 Jy ! Clean residual min=-0.006760 max=0.012593 Jy/beam ! Clean residual mean=0.000015 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.710529 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.710529 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8938 mas, bmaj=1.283 mas, bpa=-13.36 degrees ! Estimated noise=0.68879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192064 Jy ! Component: 100 - total flux cleaned = 0.0309181 Jy ! Component: 150 - total flux cleaned = 0.0388836 Jy ! Component: 200 - total flux cleaned = 0.0444616 Jy ! Total flux subtracted in 200 components = 0.0444616 Jy ! Clean residual min=-0.003226 max=0.003370 Jy/beam ! Clean residual mean=0.000012 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.75499 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.75499 Jy ! Inverting map ! Added new window around map position (-2, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396351 Jy ! Component: 100 - total flux cleaned = 0.00651969 Jy ! Component: 150 - total flux cleaned = 0.00862003 Jy ! Component: 200 - total flux cleaned = 0.0103667 Jy ! Total flux subtracted in 200 components = 0.0103667 Jy ! Clean residual min=-0.002801 max=0.002712 Jy/beam ! Clean residual mean=0.000006 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.765357 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 51 components and 0.765357 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.176 mas, bmaj=2.38 mas, bpa=-41.94 degrees ! Estimated noise=0.928068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153107 Jy ! Component: 100 - total flux cleaned = 0.00278394 Jy ! Component: 150 - total flux cleaned = 0.00378699 Jy ! Component: 200 - total flux cleaned = 0.00461058 Jy ! Total flux subtracted in 200 components = 0.00461058 Jy ! Clean residual min=-0.002649 max=0.002463 Jy/beam ! Clean residual mean=0.000005 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.769968 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391513 Jy ! Component: 100 - total flux cleaned = 0.000469454 Jy ! Component: 150 - total flux cleaned = 0.000433489 Jy ! Component: 200 - total flux cleaned = 0.000465787 Jy ! Total flux subtracted in 200 components = 0.000465787 Jy ! Clean residual min=-0.002559 max=0.002458 Jy/beam ! Clean residual mean=0.000004 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.770433 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 85 components and 0.770434 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8938 mas, bmaj=1.283 mas, bpa=-13.36 degrees ! Estimated noise=0.68879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.38634e-05 Jy ! Component: 100 - total flux cleaned = 0.000203909 Jy ! Component: 150 - total flux cleaned = 0.000402196 Jy ! Component: 200 - total flux cleaned = 0.000340699 Jy ! Total flux subtracted in 200 components = 0.000340699 Jy ! Clean residual min=-0.002329 max=0.002461 Jy/beam ! Clean residual mean=0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.770774 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 109 components and 0.770774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050792Jy sigma=0.319415 ! Fit after self-cal, rms=0.050740Jy sigma=0.319084 wmodel J0128+4901_X_map.mod ! Writing 109 model components to file: J0128+4901_X_map.mod wobs J0128+4901_X_uvs.fits ! Writing UV FITS file: J0128+4901_X_uvs.fits wwins J0128+4901_X_map.win ! wwins: Wrote 7 windows to J0128+4901_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144248 Jy ! Component: 100 - total flux cleaned = 6.65955e-05 Jy ! Component: 150 - total flux cleaned = -0.000196303 Jy ! Component: 200 - total flux cleaned = -0.000445985 Jy ! Component: 250 - total flux cleaned = -0.000720368 Jy ! Component: 300 - total flux cleaned = -0.000985357 Jy ! Component: 350 - total flux cleaned = -0.00114521 Jy ! Component: 400 - total flux cleaned = -0.00120684 Jy ! Component: 450 - total flux cleaned = -0.00120693 Jy ! Component: 500 - total flux cleaned = -0.00132584 Jy ! Component: 550 - total flux cleaned = -0.00132507 Jy ! Component: 600 - total flux cleaned = -0.00135325 Jy ! Component: 650 - total flux cleaned = -0.00132526 Jy ! Component: 700 - total flux cleaned = -0.00132552 Jy ! Component: 750 - total flux cleaned = -0.00137957 Jy ! Component: 800 - total flux cleaned = -0.00145838 Jy ! Component: 850 - total flux cleaned = -0.0014064 Jy ! Component: 900 - total flux cleaned = -0.00140671 Jy ! Component: 950 - total flux cleaned = -0.00143146 Jy ! Component: 1000 - total flux cleaned = -0.0013822 Jy ! Component: 1050 - total flux cleaned = -0.00145548 Jy ! Component: 1100 - total flux cleaned = -0.00150332 Jy ! Component: 1150 - total flux cleaned = -0.00150339 Jy ! Component: 1200 - total flux cleaned = -0.00154962 Jy ! Component: 1250 - total flux cleaned = -0.00154909 Jy ! Component: 1300 - total flux cleaned = -0.00161742 Jy ! Component: 1350 - total flux cleaned = -0.0016173 Jy ! Component: 1400 - total flux cleaned = -0.00170608 Jy ! Component: 1450 - total flux cleaned = -0.00172836 Jy ! Component: 1500 - total flux cleaned = -0.00179379 Jy ! Component: 1550 - total flux cleaned = -0.00187892 Jy ! Component: 1600 - total flux cleaned = -0.00189971 Jy ! Component: 1650 - total flux cleaned = -0.00194134 Jy ! Component: 1700 - total flux cleaned = -0.00202304 Jy ! Component: 1750 - total flux cleaned = -0.00196213 Jy ! Component: 1800 - total flux cleaned = -0.00204218 Jy ! Component: 1850 - total flux cleaned = -0.00200259 Jy ! Component: 1900 - total flux cleaned = -0.00208095 Jy ! Component: 1950 - total flux cleaned = -0.00210027 Jy ! Component: 2000 - total flux cleaned = -0.00213849 Jy ! Component: 2050 - total flux cleaned = -0.00215725 Jy ! Component: 2100 - total flux cleaned = -0.00219477 Jy ! Component: 2150 - total flux cleaned = -0.00228757 Jy ! Component: 2200 - total flux cleaned = -0.00223229 Jy ! Component: 2250 - total flux cleaned = -0.00230495 Jy ! Component: 2300 - total flux cleaned = -0.00237685 Jy ! Component: 2350 - total flux cleaned = -0.00241248 Jy ! Component: 2400 - total flux cleaned = -0.0023771 Jy ! Component: 2450 - total flux cleaned = -0.00248176 Jy ! Component: 2500 - total flux cleaned = -0.00249897 Jy ! Component: 2550 - total flux cleaned = -0.0024989 Jy ! Component: 2600 - total flux cleaned = -0.00260028 Jy ! Component: 2650 - total flux cleaned = -0.00256662 Jy ! Component: 2700 - total flux cleaned = -0.00261633 Jy ! Component: 2750 - total flux cleaned = -0.00261628 Jy ! Component: 2800 - total flux cleaned = -0.00261621 Jy ! Component: 2850 - total flux cleaned = -0.00261649 Jy ! Component: 2900 - total flux cleaned = -0.00263242 Jy ! Component: 2950 - total flux cleaned = -0.00263243 Jy ! Component: 3000 - total flux cleaned = -0.00266375 Jy ! Component: 3050 - total flux cleaned = -0.00264845 Jy ! Component: 3100 - total flux cleaned = -0.00264863 Jy ! Component: 3150 - total flux cleaned = -0.00263343 Jy ! Component: 3200 - total flux cleaned = -0.00261825 Jy ! Component: 3250 - total flux cleaned = -0.00263341 Jy ! Component: 3300 - total flux cleaned = -0.00263351 Jy ! Component: 3350 - total flux cleaned = -0.00264803 Jy ! Component: 3400 - total flux cleaned = -0.00260409 Jy ! Component: 3450 - total flux cleaned = -0.00261865 Jy ! Component: 3500 - total flux cleaned = -0.00256134 Jy ! Component: 3550 - total flux cleaned = -0.00254713 Jy ! Component: 3600 - total flux cleaned = -0.00249077 Jy ! Component: 3650 - total flux cleaned = -0.00253264 Jy ! Component: 3700 - total flux cleaned = -0.00254652 Jy ! Component: 3750 - total flux cleaned = -0.00253266 Jy ! Component: 3800 - total flux cleaned = -0.00245068 Jy ! Component: 3850 - total flux cleaned = -0.00251852 Jy ! Component: 3900 - total flux cleaned = -0.00249157 Jy ! Component: 3950 - total flux cleaned = -0.00246483 Jy ! Component: 4000 - total flux cleaned = -0.00246475 Jy ! Component: 4050 - total flux cleaned = -0.00245173 Jy ! Total flux subtracted in 4096 components = -0.00250365 Jy ! Clean residual min=-0.000714 max=0.000648 Jy/beam ! Clean residual mean=0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.768271 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 393 components and 0.76827 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0128+4901_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8938 x 1.283 at -13.36 degrees (North through East) ! Clean map min=-0.0021796 max=0.65014 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0128+4901_X_map.fits wmodel /image_prod/ug002_uva//J0128+4901_X_map.mod ! Writing 393 model components to file: /image_prod/ug002_uva//J0128+4901_X_map.mod wobs /image_prod/ug002_uva//J0128+4901_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0128+4901_X_uvs.fits wwins /image_prod/ug002_uva//J0128+4901_X_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0128+4901_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.650144 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0991738 0.0991738 0.198348 0.396695 0.79339 1.58678 3.17356 6.34712 12.6942 25.3885 50.777 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.65 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3024.99 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0128+4901_X_dfm.log closed on Wed Mar 4 19:04:53 2020