! Started logfile: /image_prod/ug002_uva//J0125-2549_S_dfm.log on Wed Mar 4 19:04:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0125-2549_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0125-2549_S_uva.fits ! AN table 1: 41 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.858885 visibilities/baseline/integration-bin. ! Found source: J0125-2549 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 36 lines of history. ! ! Reading 2958 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0125-2549_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025889Jy sigma=6.569434 ! Fit after self-cal, rms=0.853983Jy sigma=5.426342 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=8.145 mas, bpa=-12.38 degrees ! Estimated noise=2.60855 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117412 Jy ! Component: 100 - total flux cleaned = 0.144445 Jy ! Total flux subtracted in 100 components = 0.144445 Jy ! Clean residual min=-0.009645 max=0.013646 Jy/beam ! Clean residual mean=0.000020 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 0.144445 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.144445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088412Jy sigma=0.491418 ! Fit after self-cal, rms=0.088370Jy sigma=0.491354 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=8.907 mas, bpa=-11.65 degrees ! Estimated noise=2.14967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123993 Jy ! Component: 100 - total flux cleaned = 0.0195666 Jy ! Component: 150 - total flux cleaned = 0.0240707 Jy ! Component: 200 - total flux cleaned = 0.0271466 Jy ! Total flux subtracted in 200 components = 0.0271466 Jy ! Clean residual min=-0.009156 max=0.008778 Jy/beam ! Clean residual mean=-0.000001 rms=0.002140 Jy/beam ! Combined flux in latest and established models = 0.171591 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 37 components and 0.171591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086627Jy sigma=0.475976 ! Fit after self-cal, rms=0.086665Jy sigma=0.475868 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.804 x 8.907 at -11.65 degrees (North through East) ! Clean map min=-0.0087698 max=0.14757 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.99 HN 1.11 KP 1.01 ! MK 0.99 NL 0.98 OV 0.89 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 0.98 HN 1.21 KP 1.01 ! MK 1.06 NL 1.13 OV 0.86 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.97 HN 1.16 KP 1.01 ! MK 1.00 NL 0.86 OV 0.90 SC 0.91 ! ! ! Fit before self-cal, rms=0.086665Jy sigma=0.475868 ! Fit after self-cal, rms=0.098884Jy sigma=0.450508 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=8.823 mas, bpa=-11.16 degrees ! Estimated noise=2.16192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138745 Jy ! Component: 100 - total flux cleaned = 0.00157293 Jy ! Component: 150 - total flux cleaned = 0.00157285 Jy ! Component: 200 - total flux cleaned = 0.00160317 Jy ! Total flux subtracted in 200 components = 0.00160317 Jy ! Clean residual min=-0.006521 max=0.005442 Jy/beam ! Clean residual mean=0.000007 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.173195 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.173195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098819Jy sigma=0.450351 ! Fit after self-cal, rms=0.099135Jy sigma=0.450013 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099135Jy sigma=0.450013 ! Fit after self-cal, rms=0.090844Jy sigma=0.434310 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=8.737 mas, bpa=-11.26 degrees ! Estimated noise=2.15429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107615 Jy ! Component: 100 - total flux cleaned = -0.000222589 Jy ! Component: 150 - total flux cleaned = -0.000283073 Jy ! Component: 200 - total flux cleaned = -0.000308737 Jy ! Total flux subtracted in 200 components = -0.000308737 Jy ! Clean residual min=-0.003280 max=0.003325 Jy/beam ! Clean residual mean=0.000006 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.172886 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.172886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090820Jy sigma=0.434137 ! Fit after self-cal, rms=0.090914Jy sigma=0.433970 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107667 Jy ! Component: 100 - total flux cleaned = 0.000106883 Jy ! Component: 150 - total flux cleaned = 8.46908e-05 Jy ! Component: 200 - total flux cleaned = 6.41911e-05 Jy ! Total flux subtracted in 200 components = 6.41911e-05 Jy ! Clean residual min=-0.003239 max=0.003322 Jy/beam ! Clean residual mean=0.000006 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.17295 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.17295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090905Jy sigma=0.433896 ! Fit after self-cal, rms=0.090903Jy sigma=0.433892 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090903Jy sigma=0.433892 ! Fit after self-cal, rms=0.091318Jy sigma=0.433855 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=8.733 mas, bpa=-11.3 degrees ! Estimated noise=2.15034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113556 Jy ! Component: 100 - total flux cleaned = -0.00018228 Jy ! Component: 150 - total flux cleaned = -0.000220011 Jy ! Component: 200 - total flux cleaned = -0.000253627 Jy ! Total flux subtracted in 200 components = -0.000253627 Jy ! Clean residual min=-0.003213 max=0.003316 Jy/beam ! Clean residual mean=0.000006 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.172696 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.172696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091309Jy sigma=0.433792 ! Fit after self-cal, rms=0.091311Jy sigma=0.433787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.70462e-05 Jy ! Component: 100 - total flux cleaned = -8.21637e-05 Jy ! Component: 150 - total flux cleaned = -0.00011237 Jy ! Component: 200 - total flux cleaned = -0.0001401 Jy ! Total flux subtracted in 200 components = -0.0001401 Jy ! Clean residual min=-0.003225 max=0.003299 Jy/beam ! Clean residual mean=0.000006 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.172556 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.172556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091306Jy sigma=0.433758 ! Fit after self-cal, rms=0.091305Jy sigma=0.433755 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091305Jy sigma=0.433755 ! Fit after self-cal, rms=0.091470Jy sigma=0.433736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.602 mas, bmaj=16.44 mas, bpa=-3.189 degrees ! Estimated noise=2.79214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000590198 Jy ! Component: 100 - total flux cleaned = -0.000620114 Jy ! Component: 150 - total flux cleaned = -0.000619524 Jy ! Component: 200 - total flux cleaned = -0.000618971 Jy ! Total flux subtracted in 200 components = -0.000618971 Jy ! Clean residual min=-0.003363 max=0.003220 Jy/beam ! Clean residual mean=0.000016 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.171937 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.171937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091500Jy sigma=0.433861 ! Fit after self-cal, rms=0.091471Jy sigma=0.433752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010615 Jy ! Component: 100 - total flux cleaned = -0.000134776 Jy ! Component: 150 - total flux cleaned = -0.000158683 Jy ! Component: 200 - total flux cleaned = -0.000159726 Jy ! Total flux subtracted in 200 components = -0.000159726 Jy ! Clean residual min=-0.003317 max=0.003134 Jy/beam ! Clean residual mean=0.000017 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.171778 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.171778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091493Jy sigma=0.433858 ! Fit after self-cal, rms=0.091470Jy sigma=0.433800 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=8.733 mas, bpa=-11.35 degrees ! Estimated noise=2.14703 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.811 x 8.733 at -11.35 degrees (North through East) ! Clean map min=-0.0030431 max=0.14734 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=7.922 mas, bpa=-11.83 degrees ! Estimated noise=2.57935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115956 Jy ! Component: 100 - total flux cleaned = 0.142263 Jy ! Component: 150 - total flux cleaned = 0.153524 Jy ! Component: 200 - total flux cleaned = 0.160235 Jy ! Total flux subtracted in 200 components = 0.160235 Jy ! Clean residual min=-0.005100 max=0.004654 Jy/beam ! Clean residual mean=0.000013 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.160235 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.160235 Jy ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=8.733 mas, bpa=-11.35 degrees ! Estimated noise=2.14703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450688 Jy ! Component: 100 - total flux cleaned = 0.00706632 Jy ! Component: 150 - total flux cleaned = 0.0086692 Jy ! Component: 200 - total flux cleaned = 0.00970499 Jy ! Total flux subtracted in 200 components = 0.00970499 Jy ! Clean residual min=-0.003422 max=0.003313 Jy/beam ! Clean residual mean=0.000010 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.16994 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 78 components and 0.16994 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.602 mas, bmaj=16.44 mas, bpa=-3.189 degrees ! Estimated noise=2.79214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000699539 Jy ! Component: 100 - total flux cleaned = 0.000806347 Jy ! Component: 150 - total flux cleaned = 0.000912845 Jy ! Component: 200 - total flux cleaned = 0.000973 Jy ! Total flux subtracted in 200 components = 0.000973 Jy ! Clean residual min=-0.003346 max=0.003064 Jy/beam ! Clean residual mean=0.000019 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.170913 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.28489e-05 Jy ! Component: 100 - total flux cleaned = 8.89608e-05 Jy ! Component: 150 - total flux cleaned = 0.000122928 Jy ! Component: 200 - total flux cleaned = 0.000142557 Jy ! Total flux subtracted in 200 components = 0.000142557 Jy ! Clean residual min=-0.003270 max=0.003111 Jy/beam ! Clean residual mean=0.000019 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.171056 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.171056 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=8.733 mas, bpa=-11.35 degrees ! Estimated noise=2.14703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295692 Jy ! Component: 100 - total flux cleaned = 0.000189578 Jy ! Component: 150 - total flux cleaned = 0.000186461 Jy ! Component: 200 - total flux cleaned = 0.000204039 Jy ! Total flux subtracted in 200 components = 0.000204039 Jy ! Clean residual min=-0.003221 max=0.003258 Jy/beam ! Clean residual mean=0.000008 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.17126 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.17126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091456Jy sigma=0.433695 ! Fit after self-cal, rms=0.091455Jy sigma=0.433683 wmodel J0125-2549_S_map.mod ! Writing 103 model components to file: J0125-2549_S_map.mod wobs J0125-2549_S_uvs.fits ! Writing UV FITS file: J0125-2549_S_uvs.fits wwins J0125-2549_S_map.win ! wwins: Wrote 1 windows to J0125-2549_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472196 Jy ! Component: 100 - total flux cleaned = 0.00110812 Jy ! Component: 150 - total flux cleaned = 0.00155061 Jy ! Component: 200 - total flux cleaned = 0.00187595 Jy ! Component: 250 - total flux cleaned = 0.00191992 Jy ! Component: 300 - total flux cleaned = 0.00217288 Jy ! Component: 350 - total flux cleaned = 0.00229497 Jy ! Component: 400 - total flux cleaned = 0.00241439 Jy ! Component: 450 - total flux cleaned = 0.00256825 Jy ! Component: 500 - total flux cleaned = 0.00264295 Jy ! Component: 550 - total flux cleaned = 0.00275222 Jy ! Component: 600 - total flux cleaned = 0.0028233 Jy ! Component: 650 - total flux cleaned = 0.00299504 Jy ! Component: 700 - total flux cleaned = 0.00319554 Jy ! Component: 750 - total flux cleaned = 0.00329327 Jy ! Component: 800 - total flux cleaned = 0.0034837 Jy ! Component: 850 - total flux cleaned = 0.0034832 Jy ! Component: 900 - total flux cleaned = 0.00348396 Jy ! Component: 950 - total flux cleaned = 0.00354397 Jy ! Component: 1000 - total flux cleaned = 0.00357306 Jy ! Component: 1050 - total flux cleaned = 0.00354435 Jy ! Component: 1100 - total flux cleaned = 0.00354419 Jy ! Component: 1150 - total flux cleaned = 0.00354435 Jy ! Component: 1200 - total flux cleaned = 0.00354419 Jy ! Component: 1250 - total flux cleaned = 0.0035439 Jy ! Component: 1300 - total flux cleaned = 0.0034915 Jy ! Component: 1350 - total flux cleaned = 0.00341466 Jy ! Component: 1400 - total flux cleaned = 0.00338946 Jy ! Component: 1450 - total flux cleaned = 0.00331482 Jy ! Component: 1500 - total flux cleaned = 0.00329053 Jy ! Component: 1550 - total flux cleaned = 0.00329061 Jy ! Component: 1600 - total flux cleaned = 0.00333825 Jy ! Component: 1650 - total flux cleaned = 0.00324466 Jy ! Component: 1700 - total flux cleaned = 0.00331446 Jy ! Component: 1750 - total flux cleaned = 0.00338314 Jy ! Component: 1800 - total flux cleaned = 0.00345065 Jy ! Component: 1850 - total flux cleaned = 0.00349471 Jy ! Component: 1900 - total flux cleaned = 0.00349462 Jy ! Component: 1950 - total flux cleaned = 0.00355942 Jy ! Component: 2000 - total flux cleaned = 0.0036024 Jy ! Component: 2050 - total flux cleaned = 0.00366604 Jy ! Component: 2100 - total flux cleaned = 0.0037499 Jy ! Component: 2150 - total flux cleaned = 0.00379144 Jy ! Component: 2200 - total flux cleaned = 0.00381228 Jy ! Component: 2250 - total flux cleaned = 0.00389412 Jy ! Component: 2300 - total flux cleaned = 0.00397476 Jy ! Component: 2350 - total flux cleaned = 0.00403477 Jy ! Component: 2400 - total flux cleaned = 0.0040943 Jy ! Component: 2450 - total flux cleaned = 0.00421173 Jy ! Component: 2500 - total flux cleaned = 0.0042505 Jy ! Component: 2550 - total flux cleaned = 0.00430811 Jy ! Component: 2600 - total flux cleaned = 0.0043651 Jy ! Component: 2650 - total flux cleaned = 0.00440297 Jy ! Component: 2700 - total flux cleaned = 0.00447794 Jy ! Component: 2750 - total flux cleaned = 0.00451495 Jy ! Component: 2800 - total flux cleaned = 0.00457019 Jy ! Component: 2850 - total flux cleaned = 0.00464317 Jy ! Component: 2900 - total flux cleaned = 0.00467931 Jy ! Component: 2950 - total flux cleaned = 0.00476927 Jy ! Component: 3000 - total flux cleaned = 0.00485836 Jy ! Component: 3050 - total flux cleaned = 0.0048761 Jy ! Component: 3100 - total flux cleaned = 0.00498151 Jy ! Component: 3150 - total flux cleaned = 0.00505131 Jy ! Component: 3200 - total flux cleaned = 0.00512069 Jy ! Component: 3250 - total flux cleaned = 0.00517255 Jy ! Component: 3300 - total flux cleaned = 0.00530966 Jy ! Component: 3350 - total flux cleaned = 0.00537768 Jy ! Component: 3400 - total flux cleaned = 0.00544549 Jy ! Component: 3450 - total flux cleaned = 0.00556351 Jy ! Component: 3500 - total flux cleaned = 0.00566392 Jy ! Component: 3550 - total flux cleaned = 0.005764 Jy ! Component: 3600 - total flux cleaned = 0.00583029 Jy ! Component: 3650 - total flux cleaned = 0.00584688 Jy ! Component: 3700 - total flux cleaned = 0.00596219 Jy ! Component: 3750 - total flux cleaned = 0.00604438 Jy ! Component: 3800 - total flux cleaned = 0.00612633 Jy ! Component: 3850 - total flux cleaned = 0.00620803 Jy ! Component: 3900 - total flux cleaned = 0.00628951 Jy ! Component: 3950 - total flux cleaned = 0.00637076 Jy ! Component: 4000 - total flux cleaned = 0.00648433 Jy ! Component: 4050 - total flux cleaned = 0.00653298 Jy ! Total flux subtracted in 4096 components = 0.00661389 Jy ! Clean residual min=-0.000891 max=0.000999 Jy/beam ! Clean residual mean=0.000003 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.177874 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 375 components and 0.177873 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0125-2549_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.811 x 8.733 at -11.35 degrees (North through East) ! Clean map min=-0.0021622 max=0.14814 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0125-2549_S_map.fits wmodel /image_prod/ug002_uva//J0125-2549_S_map.mod ! Writing 375 model components to file: /image_prod/ug002_uva//J0125-2549_S_map.mod wobs /image_prod/ug002_uva//J0125-2549_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0125-2549_S_uvs.fits wwins /image_prod/ug002_uva//J0125-2549_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0125-2549_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.148145 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000278835 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.564654 0.564654 1.12931 2.25862 4.51723 9.03447 18.0689 36.1379 72.2757 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.148 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 531.298 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0125-2549_S_dfm.log closed on Wed Mar 4 19:04:05 2020