! Started logfile: /image_prod/ug002_uva//J0124+5618_X_dfm.log on Wed Mar 4 19:03:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0124+5618_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0124+5618_X_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.990741 visibilities/baseline/integration-bin. ! Found source: J0124+5618 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 38520 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0124+5618_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.006666Jy sigma=9.101746 ! Fit after self-cal, rms=0.918419Jy sigma=8.295221 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7229 mas, bmaj=0.9297 mas, bpa=-3.56 degrees ! Estimated noise=0.947879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617631 Jy ! Component: 100 - total flux cleaned = 0.0836184 Jy ! Total flux subtracted in 100 components = 0.0836184 Jy ! Clean residual min=-0.006268 max=0.018473 Jy/beam ! Clean residual mean=0.000001 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.0836184 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0836184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064382Jy sigma=0.562663 ! Fit after self-cal, rms=0.063857Jy sigma=0.557788 ! Inverting map ! Added new window around map position (-1.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016576 Jy ! Component: 100 - total flux cleaned = 0.0255681 Jy ! Total flux subtracted in 100 components = 0.0255681 Jy ! Clean residual min=-0.004441 max=0.008894 Jy/beam ! Clean residual mean=0.000001 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.109186 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.109186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058743Jy sigma=0.507478 ! Fit after self-cal, rms=0.058143Jy sigma=0.501968 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815947 Jy ! Component: 100 - total flux cleaned = 0.0129208 Jy ! Total flux subtracted in 100 components = 0.0129208 Jy ! Clean residual min=-0.003744 max=0.004923 Jy/beam ! Clean residual mean=0.000001 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.122107 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.122107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056738Jy sigma=0.487703 ! Fit after self-cal, rms=0.056585Jy sigma=0.486360 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9565 mas, bmaj=1.216 mas, bpa=-5.123 degrees ! Estimated noise=0.403707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543472 Jy ! Component: 100 - total flux cleaned = 0.00821187 Jy ! Component: 150 - total flux cleaned = 0.0097171 Jy ! Component: 200 - total flux cleaned = 0.0101069 Jy ! Total flux subtracted in 200 components = 0.0101069 Jy ! Clean residual min=-0.003054 max=0.003960 Jy/beam ! Clean residual mean=0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.132214 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 40 components and 0.132214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056098Jy sigma=0.481212 ! Fit after self-cal, rms=0.056013Jy sigma=0.480529 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9565 x 1.216 at -5.123 degrees (North through East) ! Clean map min=-0.0027249 max=0.076151 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 1.02 ! LA 0.99 MK 1.07 NL 1.18 OV 0.88 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.97 KP 1.06 ! LA 1.01 MK 1.06 NL 1.15 OV 0.87 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.04 KP 1.04 ! LA 1.00 MK 1.04 NL 1.13 OV 0.89 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.01 KP 1.06 ! LA 1.00 MK 1.07 NL 1.18 OV 0.91 ! SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.03 ! LA 1.01 MK 1.07 NL 1.16 OV 0.87 ! SC 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 1.05 ! LA 1.03 MK 1.05 NL 1.17 OV 0.88 ! SC 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.97 KP 1.05 ! LA 1.00 MK 1.08 NL 1.15 OV 0.90 ! SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 1.03 ! LA 1.01 MK 1.09 NL 1.16 OV 0.90 ! SC 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.06 ! LA 1.03 MK 1.03 NL 1.15 OV 0.92 ! SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.99 KP 1.07 ! LA 1.02 MK 1.09 NL 1.17 OV 0.89 ! SC 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.03 KP 1.06 ! LA 1.01 MK 1.08 NL 1.15 OV 0.90 ! SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.98 KP 1.09 ! LA 1.02 MK 1.09 NL 1.15 OV 0.88 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.056013Jy sigma=0.480529 ! Fit after self-cal, rms=0.054522Jy sigma=0.473203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9584 mas, bmaj=1.215 mas, bpa=-2.826 degrees ! Estimated noise=0.405524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404724 Jy ! Component: 100 - total flux cleaned = 0.000146825 Jy ! Component: 150 - total flux cleaned = -3.35804e-05 Jy ! Component: 200 - total flux cleaned = -0.000155737 Jy ! Total flux subtracted in 200 components = -0.000155737 Jy ! Clean residual min=-0.002308 max=0.002020 Jy/beam ! Clean residual mean=0.000000 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.132059 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.132059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054471Jy sigma=0.472782 ! Fit after self-cal, rms=0.054501Jy sigma=0.472584 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054501Jy sigma=0.472584 ! Fit after self-cal, rms=0.054912Jy sigma=0.466032 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9493 mas, bmaj=1.219 mas, bpa=-2.36 degrees ! Estimated noise=0.404862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551718 Jy ! Component: 100 - total flux cleaned = 0.000518428 Jy ! Component: 150 - total flux cleaned = 0.000478617 Jy ! Component: 200 - total flux cleaned = 0.000454725 Jy ! Total flux subtracted in 200 components = 0.000454725 Jy ! Clean residual min=-0.000951 max=0.001189 Jy/beam ! Clean residual mean=0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.132513 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.132513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054900Jy sigma=0.465933 ! Fit after self-cal, rms=0.054964Jy sigma=0.465778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.6, -9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116851 Jy ! Component: 100 - total flux cleaned = 0.00185671 Jy ! Component: 150 - total flux cleaned = 0.00217105 Jy ! Component: 200 - total flux cleaned = 0.00227454 Jy ! Total flux subtracted in 200 components = 0.00227454 Jy ! Clean residual min=-0.000934 max=0.001047 Jy/beam ! Clean residual mean=0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.134788 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.134788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054936Jy sigma=0.465496 ! Fit after self-cal, rms=0.054935Jy sigma=0.465470 ! Inverting map ! Added new window around map position (-3.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887447 Jy ! Component: 100 - total flux cleaned = 0.00119053 Jy ! Component: 150 - total flux cleaned = 0.00150296 Jy ! Component: 200 - total flux cleaned = 0.00172467 Jy ! Total flux subtracted in 200 components = 0.00172467 Jy ! Clean residual min=-0.000882 max=0.000988 Jy/beam ! Clean residual mean=0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.136512 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 98 components and 0.136512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054913Jy sigma=0.465230 ! Fit after self-cal, rms=0.054911Jy sigma=0.465217 ! Inverting map ! Added new window around map position (-3.8, 36.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848325 Jy ! Component: 100 - total flux cleaned = 0.00124236 Jy ! Component: 150 - total flux cleaned = 0.00143742 Jy ! Component: 200 - total flux cleaned = 0.00161371 Jy ! Total flux subtracted in 200 components = 0.00161371 Jy ! Clean residual min=-0.000817 max=0.000883 Jy/beam ! Clean residual mean=0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.138126 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 0.138126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054895Jy sigma=0.465052 ! Fit after self-cal, rms=0.054894Jy sigma=0.465041 ! Inverting map ! Added new window around map position (-6.6, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000844861 Jy ! Component: 100 - total flux cleaned = 0.00122152 Jy ! Component: 150 - total flux cleaned = 0.00146665 Jy ! Component: 200 - total flux cleaned = 0.00167056 Jy ! Total flux subtracted in 200 components = 0.00167056 Jy ! Clean residual min=-0.000754 max=0.000847 Jy/beam ! Clean residual mean=0.000000 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.139797 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 132 components and 0.139797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054878Jy sigma=0.464898 ! Fit after self-cal, rms=0.054878Jy sigma=0.464889 ! Inverting map ! Added new window around map position (23.4, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359206 Jy ! Component: 100 - total flux cleaned = 0.000339107 Jy ! Component: 150 - total flux cleaned = 0.000427987 Jy ! Component: 200 - total flux cleaned = 0.000509538 Jy ! Total flux subtracted in 200 components = 0.000509538 Jy ! Clean residual min=-0.000711 max=0.000787 Jy/beam ! Clean residual mean=0.000000 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.140306 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 146 components and 0.140306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054865Jy sigma=0.464775 ! Fit after self-cal, rms=0.054864Jy sigma=0.464770 ! Inverting map ! Added new window around map position (-43.8, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034876 Jy ! Component: 100 - total flux cleaned = 0.000264881 Jy ! Component: 150 - total flux cleaned = 0.00031995 Jy ! Component: 200 - total flux cleaned = 0.000372503 Jy ! Total flux subtracted in 200 components = 0.000372503 Jy ! Clean residual min=-0.000711 max=0.000755 Jy/beam ! Clean residual mean=0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.140679 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.140679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054852Jy sigma=0.464675 ! Fit after self-cal, rms=0.054853Jy sigma=0.464671 ! Inverting map ! Added new window around map position (24, 48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647446 Jy ! Component: 100 - total flux cleaned = 0.000901789 Jy ! Component: 150 - total flux cleaned = 0.00103128 Jy ! Component: 200 - total flux cleaned = 0.0011165 Jy ! Total flux subtracted in 200 components = 0.0011165 Jy ! Clean residual min=-0.000667 max=0.000683 Jy/beam ! Clean residual mean=0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.141795 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 173 components and 0.141795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054843Jy sigma=0.464581 ! Fit after self-cal, rms=0.054843Jy sigma=0.464577 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054843Jy sigma=0.464577 ! Fit after self-cal, rms=0.054891Jy sigma=0.464526 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9475 mas, bmaj=1.219 mas, bpa=-2.042 degrees ! Estimated noise=0.404759 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305447 Jy ! Component: 100 - total flux cleaned = 0.000521174 Jy ! Component: 150 - total flux cleaned = 0.000683514 Jy ! Component: 200 - total flux cleaned = 0.000765625 Jy ! Total flux subtracted in 200 components = 0.000765625 Jy ! Clean residual min=-0.000647 max=0.000671 Jy/beam ! Clean residual mean=0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.142561 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 176 components and 0.142561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054885Jy sigma=0.464478 ! Fit after self-cal, rms=0.054887Jy sigma=0.464476 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140767 Jy ! Component: 100 - total flux cleaned = 0.000185035 Jy ! Component: 150 - total flux cleaned = 0.000238513 Jy ! Component: 200 - total flux cleaned = 0.000290158 Jy ! Total flux subtracted in 200 components = 0.000290158 Jy ! Clean residual min=-0.000637 max=0.000658 Jy/beam ! Clean residual mean=0.000000 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.142851 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 186 components and 0.142851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054883Jy sigma=0.464443 ! Fit after self-cal, rms=0.054883Jy sigma=0.464442 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054883Jy sigma=0.464442 ! Fit after self-cal, rms=0.054896Jy sigma=0.464439 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.124 mas, bmaj=2.208 mas, bpa=28.55 degrees ! Estimated noise=0.529008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379063 Jy ! Component: 100 - total flux cleaned = 0.000614891 Jy ! Component: 150 - total flux cleaned = 0.000790019 Jy ! Component: 200 - total flux cleaned = 0.000921415 Jy ! Total flux subtracted in 200 components = 0.000921415 Jy ! Clean residual min=-0.000701 max=0.000659 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.143772 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 215 components and 0.143772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054894Jy sigma=0.464424 ! Fit after self-cal, rms=0.054894Jy sigma=0.464422 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136503 Jy ! Component: 100 - total flux cleaned = 0.000229736 Jy ! Component: 150 - total flux cleaned = 0.000316592 Jy ! Component: 200 - total flux cleaned = 0.000375815 Jy ! Total flux subtracted in 200 components = 0.000375815 Jy ! Clean residual min=-0.000675 max=0.000664 Jy/beam ! Clean residual mean=0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.144148 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 222 components and 0.144148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054893Jy sigma=0.464414 ! Fit after self-cal, rms=0.054893Jy sigma=0.464414 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.947 mas, bmaj=1.219 mas, bpa=-1.959 degrees ! Estimated noise=0.404854 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.947 x 1.219 at -1.959 degrees (North through East) ! Clean map min=-0.0005778 max=0.075947 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7144 mas, bmaj=0.9394 mas, bpa=0.3287 degrees ! Estimated noise=0.943332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0610978 Jy ! Component: 100 - total flux cleaned = 0.0876888 Jy ! Component: 150 - total flux cleaned = 0.10293 Jy ! Component: 200 - total flux cleaned = 0.112274 Jy ! Total flux subtracted in 200 components = 0.112274 Jy ! Clean residual min=-0.003097 max=0.004957 Jy/beam ! Clean residual mean=0.000000 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.112274 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.112274 Jy ! Inverting map and beam ! Estimated beam: bmin=0.947 mas, bmaj=1.219 mas, bpa=-1.959 degrees ! Estimated noise=0.404854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081467 Jy ! Component: 100 - total flux cleaned = 0.0129859 Jy ! Component: 150 - total flux cleaned = 0.0160318 Jy ! Component: 200 - total flux cleaned = 0.0181225 Jy ! Total flux subtracted in 200 components = 0.0181225 Jy ! Clean residual min=-0.001154 max=0.001271 Jy/beam ! Clean residual mean=0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.130397 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.130397 Jy ! Inverting map ! Added new window around map position (8.2, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170951 Jy ! Component: 100 - total flux cleaned = 0.00316461 Jy ! Component: 150 - total flux cleaned = 0.00443319 Jy ! Component: 200 - total flux cleaned = 0.00556781 Jy ! Total flux subtracted in 200 components = 0.00556781 Jy ! Clean residual min=-0.000984 max=0.000925 Jy/beam ! Clean residual mean=0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.135965 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 59 components and 0.135965 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.124 mas, bmaj=2.208 mas, bpa=28.55 degrees ! Estimated noise=0.529008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155247 Jy ! Component: 100 - total flux cleaned = 0.00270914 Jy ! Component: 150 - total flux cleaned = 0.00363724 Jy ! Component: 200 - total flux cleaned = 0.00440023 Jy ! Total flux subtracted in 200 components = 0.00440023 Jy ! Clean residual min=-0.000896 max=0.000792 Jy/beam ! Clean residual mean=-0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.140365 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545278 Jy ! Component: 100 - total flux cleaned = 0.00100071 Jy ! Component: 150 - total flux cleaned = 0.00142697 Jy ! Component: 200 - total flux cleaned = 0.00182586 Jy ! Total flux subtracted in 200 components = 0.00182586 Jy ! Clean residual min=-0.000805 max=0.000682 Jy/beam ! Clean residual mean=-0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.142191 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 132 components and 0.142191 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.947 mas, bmaj=1.219 mas, bpa=-1.959 degrees ! Estimated noise=0.404854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580796 Jy ! Component: 100 - total flux cleaned = 0.000803764 Jy ! Component: 150 - total flux cleaned = 0.00100614 Jy ! Component: 200 - total flux cleaned = 0.00114726 Jy ! Total flux subtracted in 200 components = 0.00114726 Jy ! Clean residual min=-0.000730 max=0.000753 Jy/beam ! Clean residual mean=-0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.143338 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 159 components and 0.143338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054945Jy sigma=0.464861 ! Fit after self-cal, rms=0.054935Jy sigma=0.464770 wmodel J0124+5618_X_map.mod ! Writing 159 model components to file: J0124+5618_X_map.mod wobs J0124+5618_X_uvs.fits ! Writing UV FITS file: J0124+5618_X_uvs.fits wwins J0124+5618_X_map.win ! wwins: Wrote 10 windows to J0124+5618_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.64635e-05 Jy ! Component: 100 - total flux cleaned = 0.000116284 Jy ! Component: 150 - total flux cleaned = 0.000140887 Jy ! Component: 200 - total flux cleaned = 0.000140794 Jy ! Component: 250 - total flux cleaned = 9.39787e-05 Jy ! Component: 300 - total flux cleaned = 8.23559e-05 Jy ! Component: 350 - total flux cleaned = 2.63504e-05 Jy ! Component: 400 - total flux cleaned = 1.5139e-05 Jy ! Component: 450 - total flux cleaned = -7.12152e-05 Jy ! Component: 500 - total flux cleaned = -0.000134619 Jy ! Component: 550 - total flux cleaned = -0.000176212 Jy ! Component: 600 - total flux cleaned = -0.000207098 Jy ! Component: 650 - total flux cleaned = -0.000257897 Jy ! Component: 700 - total flux cleaned = -0.000268023 Jy ! Component: 750 - total flux cleaned = -0.000307919 Jy ! Component: 800 - total flux cleaned = -0.000367098 Jy ! Component: 850 - total flux cleaned = -0.000435168 Jy ! Component: 900 - total flux cleaned = -0.000521407 Jy ! Component: 950 - total flux cleaned = -0.000549793 Jy ! Component: 1000 - total flux cleaned = -0.000587376 Jy ! Component: 1050 - total flux cleaned = -0.000652622 Jy ! Component: 1100 - total flux cleaned = -0.00069871 Jy ! Component: 1150 - total flux cleaned = -0.000744324 Jy ! Component: 1200 - total flux cleaned = -0.000825465 Jy ! Component: 1250 - total flux cleaned = -0.000816447 Jy ! Component: 1300 - total flux cleaned = -0.000878358 Jy ! Component: 1350 - total flux cleaned = -0.000860891 Jy ! Component: 1400 - total flux cleaned = -0.000913249 Jy ! Component: 1450 - total flux cleaned = -0.000973617 Jy ! Component: 1500 - total flux cleaned = -0.000990813 Jy ! Component: 1550 - total flux cleaned = -0.00102487 Jy ! Component: 1600 - total flux cleaned = -0.00108374 Jy ! Component: 1650 - total flux cleaned = -0.00110884 Jy ! Component: 1700 - total flux cleaned = -0.00116688 Jy ! Component: 1750 - total flux cleaned = -0.00119159 Jy ! Component: 1800 - total flux cleaned = -0.00125708 Jy ! Component: 1850 - total flux cleaned = -0.00128963 Jy ! Component: 1900 - total flux cleaned = -0.00130585 Jy ! Component: 1950 - total flux cleaned = -0.00137002 Jy ! Component: 2000 - total flux cleaned = -0.00141789 Jy ! Component: 2050 - total flux cleaned = -0.0014338 Jy ! Component: 2100 - total flux cleaned = -0.00146532 Jy ! Component: 2150 - total flux cleaned = -0.00154366 Jy ! Component: 2200 - total flux cleaned = -0.00157483 Jy ! Component: 2250 - total flux cleaned = -0.00159798 Jy ! Component: 2300 - total flux cleaned = -0.00166719 Jy ! Component: 2350 - total flux cleaned = -0.00169016 Jy ! Component: 2400 - total flux cleaned = -0.00174335 Jy ! Component: 2450 - total flux cleaned = -0.00178108 Jy ! Component: 2500 - total flux cleaned = -0.00184874 Jy ! Component: 2550 - total flux cleaned = -0.00187112 Jy ! Component: 2600 - total flux cleaned = -0.00191564 Jy ! Component: 2650 - total flux cleaned = -0.00195257 Jy ! Component: 2700 - total flux cleaned = -0.00201872 Jy ! Component: 2750 - total flux cleaned = -0.00202602 Jy ! Component: 2800 - total flux cleaned = -0.00204789 Jy ! Component: 2850 - total flux cleaned = -0.00209864 Jy ! Component: 2900 - total flux cleaned = -0.00211306 Jy ! Component: 2950 - total flux cleaned = -0.00214898 Jy ! Component: 3000 - total flux cleaned = -0.00219893 Jy ! Component: 3050 - total flux cleaned = -0.0021847 Jy ! Component: 3100 - total flux cleaned = -0.00224125 Jy ! Component: 3150 - total flux cleaned = -0.00225531 Jy ! Component: 3200 - total flux cleaned = -0.00226934 Jy ! Component: 3250 - total flux cleaned = -0.00229717 Jy ! Component: 3300 - total flux cleaned = -0.00229025 Jy ! Component: 3350 - total flux cleaned = -0.00232476 Jy ! Component: 3400 - total flux cleaned = -0.00235231 Jy ! Component: 3450 - total flux cleaned = -0.00240019 Jy ! Component: 3500 - total flux cleaned = -0.00242065 Jy ! Component: 3550 - total flux cleaned = -0.00242061 Jy ! Component: 3600 - total flux cleaned = -0.00242734 Jy ! Component: 3650 - total flux cleaned = -0.00244748 Jy ! Component: 3700 - total flux cleaned = -0.00249437 Jy ! Component: 3750 - total flux cleaned = -0.00250105 Jy ! Component: 3800 - total flux cleaned = -0.00251439 Jy ! Component: 3850 - total flux cleaned = -0.00252093 Jy ! Component: 3900 - total flux cleaned = -0.0025605 Jy ! Component: 3950 - total flux cleaned = -0.00256709 Jy ! Component: 4000 - total flux cleaned = -0.00259319 Jy ! Component: 4050 - total flux cleaned = -0.00260622 Jy ! Total flux subtracted in 4096 components = -0.0026192 Jy ! Clean residual min=-0.000424 max=0.000459 Jy/beam ! Clean residual mean=-0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.140719 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 479 components and 0.140719 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0124+5618_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.947 x 1.219 at -1.959 degrees (North through East) ! Clean map min=-0.00056746 max=0.075674 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0124+5618_X_map.fits wmodel /image_prod/ug002_uva//J0124+5618_X_map.mod ! Writing 479 model components to file: /image_prod/ug002_uva//J0124+5618_X_map.mod wobs /image_prod/ug002_uva//J0124+5618_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0124+5618_X_uvs.fits wwins /image_prod/ug002_uva//J0124+5618_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0124+5618_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0756739 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106957 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.424017 0.424017 0.848035 1.69607 3.39214 6.78428 13.5686 27.1371 54.2742 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.075 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 707.518 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0124+5618_X_dfm.log closed on Wed Mar 4 19:03:27 2020