! Started logfile: /image_prod/ug002_uva//J0121+1149_X_i_dfm.log on Wed Mar 4 19:01:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0121+1149_X_i_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0121+1149_X_i_uva.fits ! AN table 1: 23 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.919082 visibilities/baseline/integration-bin. ! Found source: J0121+1149 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 9132 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0121+1149_X_i] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.417305Jy sigma=8.701013 ! Fit after self-cal, rms=0.434191Jy sigma=3.347368 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6843 mas, bmaj=1.611 mas, bpa=-0.4648 degrees ! Estimated noise=1.68608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.581391 Jy ! Component: 100 - total flux cleaned = 0.832612 Jy ! Total flux subtracted in 100 components = 0.832612 Jy ! Clean residual min=-0.071477 max=0.135306 Jy/beam ! Clean residual mean=-0.000033 rms=0.013338 Jy/beam ! Combined flux in latest and established models = 0.832612 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.832612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.354663Jy sigma=2.020614 ! Fit after self-cal, rms=0.347999Jy sigma=1.945105 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15631 Jy ! Component: 100 - total flux cleaned = 0.253359 Jy ! Total flux subtracted in 100 components = 0.253359 Jy ! Clean residual min=-0.037107 max=0.102339 Jy/beam ! Clean residual mean=-0.000023 rms=0.008390 Jy/beam ! Combined flux in latest and established models = 1.08597 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 1.08597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.210856Jy sigma=1.248479 ! Fit after self-cal, rms=0.206143Jy sigma=1.202302 ! Inverting map ! Added new window around map position (-1, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0986552 Jy ! Component: 100 - total flux cleaned = 0.155815 Jy ! Total flux subtracted in 100 components = 0.155815 Jy ! Clean residual min=-0.024865 max=0.042183 Jy/beam ! Clean residual mean=-0.000012 rms=0.004854 Jy/beam ! Combined flux in latest and established models = 1.24179 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 1.24179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130728Jy sigma=0.779917 ! Fit after self-cal, rms=0.124209Jy sigma=0.743499 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484902 Jy ! Component: 100 - total flux cleaned = 0.0798984 Jy ! Total flux subtracted in 100 components = 0.0798984 Jy ! Clean residual min=-0.015356 max=0.024363 Jy/beam ! Clean residual mean=-0.000006 rms=0.003226 Jy/beam ! Combined flux in latest and established models = 1.32169 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 1.32169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092705Jy sigma=0.576787 ! Fit after self-cal, rms=0.090652Jy sigma=0.566074 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263712 Jy ! Component: 100 - total flux cleaned = 0.0443358 Jy ! Total flux subtracted in 100 components = 0.0443358 Jy ! Clean residual min=-0.011829 max=0.016480 Jy/beam ! Clean residual mean=-0.000003 rms=0.002582 Jy/beam ! Combined flux in latest and established models = 1.36602 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 1.36602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078292Jy sigma=0.504765 ! Fit after self-cal, rms=0.077524Jy sigma=0.501032 ! Inverting map ! Added new window around map position (0, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167942 Jy ! Component: 100 - total flux cleaned = 0.0287942 Jy ! Total flux subtracted in 100 components = 0.0287942 Jy ! Clean residual min=-0.010924 max=0.012767 Jy/beam ! Clean residual mean=-0.000001 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 1.39482 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 1.39482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072502Jy sigma=0.476218 ! Fit after self-cal, rms=0.072242Jy sigma=0.475205 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8292 mas, bmaj=1.821 mas, bpa=-1.373 degrees ! Estimated noise=1.18579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105397 Jy ! Component: 100 - total flux cleaned = 0.0155344 Jy ! Component: 150 - total flux cleaned = 0.0159973 Jy ! Component: 200 - total flux cleaned = 0.0164084 Jy ! Total flux subtracted in 200 components = 0.0164084 Jy ! Clean residual min=-0.007641 max=0.007386 Jy/beam ! Clean residual mean=0.000003 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 1.41122 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 1.41122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070091Jy sigma=0.462870 ! Fit after self-cal, rms=0.069920Jy sigma=0.462120 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8292 x 1.821 at -1.373 degrees (North through East) ! Clean map min=-0.006967 max=0.71921 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 KP 0.99 LA 1.01 ! MK 1.00 NL 0.98 OV 1.00 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.00 LA 1.01 ! MK 0.97 NL 0.98 OV 0.99 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 KP 0.99 LA 1.02 ! MK 0.99 NL 1.00 OV 1.01 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 KP 0.99 LA 1.02 ! MK 1.01 NL 1.00 OV 1.00 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 KP 1.00 LA 1.02 ! MK 0.97 NL 0.96 OV 1.00 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 KP 1.01 LA 1.00 ! MK 0.99 NL 0.99 OV 1.02 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 1.02 LA 1.02 ! MK 1.00 NL 0.99 OV 1.00 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 KP 1.00 LA 1.02 ! MK 1.02 NL 1.02 OV 0.97 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 KP 1.01 LA 1.00 ! MK 1.03 NL 1.01 OV 0.99 PT 1.02 ! SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 1.00 LA 1.01 ! MK 1.00 NL 0.96 OV 1.02 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 KP 0.99 LA 1.00 ! MK 1.00 NL 1.03 OV 0.99 PT 1.00 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 KP 1.02 LA 1.00 ! MK 1.02 NL 1.02 OV 1.01 PT 0.97 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.069920Jy sigma=0.462120 ! Fit after self-cal, rms=0.066256Jy sigma=0.442686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8292 mas, bmaj=1.821 mas, bpa=-1.403 degrees ! Estimated noise=1.18439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427146 Jy ! Component: 100 - total flux cleaned = 0.00711469 Jy ! Component: 150 - total flux cleaned = 0.00833269 Jy ! Component: 200 - total flux cleaned = 0.00887539 Jy ! Total flux subtracted in 200 components = 0.00887539 Jy ! Clean residual min=-0.006629 max=0.006712 Jy/beam ! Clean residual mean=-0.000000 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 1.4201 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 1.4201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064924Jy sigma=0.432763 ! Fit after self-cal, rms=0.064852Jy sigma=0.432423 ! Inverting map ! Added new window around map position (-0.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013977 Jy ! Component: 100 - total flux cleaned = 0.00222744 Jy ! Component: 150 - total flux cleaned = 0.00276816 Jy ! Component: 200 - total flux cleaned = 0.00260752 Jy ! Total flux subtracted in 200 components = 0.00260752 Jy ! Clean residual min=-0.005852 max=0.005860 Jy/beam ! Clean residual mean=0.000000 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 1.42271 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 1.42271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063824Jy sigma=0.424609 ! Fit after self-cal, rms=0.063778Jy sigma=0.424383 ! Inverting map ! Added new window around map position (-4, -14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467813 Jy ! Component: 100 - total flux cleaned = 0.00437413 Jy ! Component: 150 - total flux cleaned = 0.00365009 Jy ! Component: 200 - total flux cleaned = 0.00351757 Jy ! Total flux subtracted in 200 components = 0.00351757 Jy ! Clean residual min=-0.005364 max=0.005414 Jy/beam ! Clean residual mean=0.000000 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 1.42622 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 88 components and 1.42622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063092Jy sigma=0.419214 ! Fit after self-cal, rms=0.063073Jy sigma=0.419058 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063073Jy sigma=0.419058 ! Fit after self-cal, rms=0.059879Jy sigma=0.401902 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8289 mas, bmaj=1.818 mas, bpa=-1.351 degrees ! Estimated noise=1.18508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266747 Jy ! Component: 100 - total flux cleaned = 0.00310032 Jy ! Component: 150 - total flux cleaned = 0.00335615 Jy ! Component: 200 - total flux cleaned = 0.00313094 Jy ! Total flux subtracted in 200 components = 0.00313094 Jy ! Clean residual min=-0.003680 max=0.004110 Jy/beam ! Clean residual mean=-0.000001 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 1.42936 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 99 components and 1.42936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059364Jy sigma=0.398149 ! Fit after self-cal, rms=0.059347Jy sigma=0.398016 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284328 Jy ! Component: 100 - total flux cleaned = 0.00342136 Jy ! Component: 150 - total flux cleaned = 0.00394225 Jy ! Component: 200 - total flux cleaned = 0.00432948 Jy ! Total flux subtracted in 200 components = 0.00432948 Jy ! Clean residual min=-0.003409 max=0.003239 Jy/beam ! Clean residual mean=-0.000000 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 1.43368 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 1.43369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058935Jy sigma=0.395150 ! Fit after self-cal, rms=0.058924Jy sigma=0.395072 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058924Jy sigma=0.395072 ! Fit after self-cal, rms=0.058831Jy sigma=0.394619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8283 mas, bmaj=1.817 mas, bpa=-1.353 degrees ! Estimated noise=1.18474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015027 Jy ! Component: 100 - total flux cleaned = 0.00197573 Jy ! Component: 150 - total flux cleaned = 0.00197303 Jy ! Component: 200 - total flux cleaned = 0.00189234 Jy ! Total flux subtracted in 200 components = 0.00189234 Jy ! Clean residual min=-0.002989 max=0.003064 Jy/beam ! Clean residual mean=-0.000001 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 1.43558 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 119 components and 1.43558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058597Jy sigma=0.392943 ! Fit after self-cal, rms=0.058594Jy sigma=0.392903 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.8, -15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235704 Jy ! Component: 100 - total flux cleaned = 0.00325321 Jy ! Component: 150 - total flux cleaned = 0.0036996 Jy ! Component: 200 - total flux cleaned = 0.00398362 Jy ! Total flux subtracted in 200 components = 0.00398362 Jy ! Clean residual min=-0.002808 max=0.002526 Jy/beam ! Clean residual mean=-0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 1.43956 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 133 components and 1.43956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058384Jy sigma=0.391522 ! Fit after self-cal, rms=0.058382Jy sigma=0.391500 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058382Jy sigma=0.391500 ! Fit after self-cal, rms=0.058325Jy sigma=0.391395 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.122 mas, bmaj=2.745 mas, bpa=0.3312 degrees ! Estimated noise=1.74379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434453 Jy ! Component: 100 - total flux cleaned = 0.0010628 Jy ! Component: 150 - total flux cleaned = 0.00151255 Jy ! Component: 200 - total flux cleaned = 0.00209126 Jy ! Total flux subtracted in 200 components = 0.00209126 Jy ! Clean residual min=-0.002485 max=0.002713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 1.44165 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 1.44165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058290Jy sigma=0.391209 ! Fit after self-cal, rms=0.058285Jy sigma=0.391166 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111063 Jy ! Component: 100 - total flux cleaned = 0.000526282 Jy ! Component: 150 - total flux cleaned = 0.000901916 Jy ! Component: 200 - total flux cleaned = 0.0012152 Jy ! Total flux subtracted in 200 components = 0.0012152 Jy ! Clean residual min=-0.002389 max=0.002523 Jy/beam ! Clean residual mean=-0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 1.44287 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 175 components and 1.44287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058256Jy sigma=0.391045 ! Fit after self-cal, rms=0.058250Jy sigma=0.391008 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8277 mas, bmaj=1.816 mas, bpa=-1.358 degrees ! Estimated noise=1.18424 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8277 x 1.816 at -1.358 degrees (North through East) ! Clean map min=-0.0043136 max=0.71868 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058250Jy sigma=0.391008 ! Fit after self-cal, rms=0.055832Jy sigma=0.357385 ! Inverting map and beam ! Estimated beam: bmin=0.8285 mas, bmaj=1.816 mas, bpa=-1.288 degrees ! Estimated noise=1.18505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100206 Jy ! Component: 100 - total flux cleaned = 0.00108337 Jy ! Component: 150 - total flux cleaned = 0.00115018 Jy ! Component: 200 - total flux cleaned = 0.00127158 Jy ! Total flux subtracted in 200 components = 0.00127158 Jy ! Clean residual min=-0.002220 max=0.002178 Jy/beam ! Clean residual mean=-0.000002 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 1.44414 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 182 components and 1.44414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055681Jy sigma=0.356297 ! Fit after self-cal, rms=0.055676Jy sigma=0.356278 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.67058e-05 Jy ! Component: 100 - total flux cleaned = 6.58874e-05 Jy ! Component: 150 - total flux cleaned = 0.000222941 Jy ! Component: 200 - total flux cleaned = 0.000169929 Jy ! Total flux subtracted in 200 components = 0.000169929 Jy ! Clean residual min=-0.002114 max=0.002138 Jy/beam ! Clean residual mean=-0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 1.44431 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 185 components and 1.44431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055593Jy sigma=0.355655 ! Fit after self-cal, rms=0.055592Jy sigma=0.355646 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055592Jy sigma=0.355646 ! Fit after self-cal, rms=0.055583Jy sigma=0.355568 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6823 mas, bmaj=1.606 mas, bpa=-0.3822 degrees ! Estimated noise=1.68248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.586881 Jy ! Component: 100 - total flux cleaned = 0.861179 Jy ! Component: 150 - total flux cleaned = 1.02746 Jy ! Component: 200 - total flux cleaned = 1.13544 Jy ! Total flux subtracted in 200 components = 1.13544 Jy ! Clean residual min=-0.027653 max=0.058044 Jy/beam ! Clean residual mean=-0.000018 rms=0.005950 Jy/beam ! Combined flux in latest and established models = 1.13544 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.13544 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8279 mas, bmaj=1.815 mas, bpa=-1.288 degrees ! Estimated noise=1.18475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.098511 Jy ! Component: 100 - total flux cleaned = 0.159521 Jy ! Component: 150 - total flux cleaned = 0.200855 Jy ! Component: 200 - total flux cleaned = 0.229761 Jy ! Total flux subtracted in 200 components = 0.229761 Jy ! Clean residual min=-0.008666 max=0.016063 Jy/beam ! Clean residual mean=-0.000017 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 1.3652 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 1.3652 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203602 Jy ! Component: 100 - total flux cleaned = 0.0347776 Jy ! Component: 150 - total flux cleaned = 0.0452712 Jy ! Component: 200 - total flux cleaned = 0.0498879 Jy ! Total flux subtracted in 200 components = 0.0498879 Jy ! Clean residual min=-0.005419 max=0.005501 Jy/beam ! Clean residual mean=-0.000005 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 1.41509 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 1.41509 Jy ! Inverting map ! Added new window around map position (-9.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344924 Jy ! Component: 100 - total flux cleaned = 0.00667787 Jy ! Component: 150 - total flux cleaned = 0.00935858 Jy ! Component: 200 - total flux cleaned = 0.0109862 Jy ! Total flux subtracted in 200 components = 0.0109862 Jy ! Clean residual min=-0.004147 max=0.004359 Jy/beam ! Clean residual mean=-0.000003 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 1.42608 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 65 components and 1.42608 Jy ! Inverting map ! Added new window around map position (2.2, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246009 Jy ! Component: 100 - total flux cleaned = 0.00332941 Jy ! Component: 150 - total flux cleaned = 0.00463302 Jy ! Component: 200 - total flux cleaned = 0.00554577 Jy ! Total flux subtracted in 200 components = 0.00554577 Jy ! Clean residual min=-0.003730 max=0.003569 Jy/beam ! Clean residual mean=-0.000002 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 1.43162 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 1.43162 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=2.743 mas, bpa=0.3078 degrees ! Estimated noise=1.74491 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340671 Jy ! Component: 100 - total flux cleaned = 0.00548076 Jy ! Component: 150 - total flux cleaned = 0.00718516 Jy ! Component: 200 - total flux cleaned = 0.00869732 Jy ! Total flux subtracted in 200 components = 0.00869732 Jy ! Clean residual min=-0.002650 max=0.002526 Jy/beam ! Clean residual mean=-0.000003 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 1.44032 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112098 Jy ! Component: 100 - total flux cleaned = 0.00195662 Jy ! Component: 150 - total flux cleaned = 0.00267075 Jy ! Component: 200 - total flux cleaned = 0.00314499 Jy ! Total flux subtracted in 200 components = 0.00314499 Jy ! Clean residual min=-0.002426 max=0.002306 Jy/beam ! Clean residual mean=-0.000003 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 1.44347 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 138 components and 1.44347 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8279 mas, bmaj=1.815 mas, bpa=-1.288 degrees ! Estimated noise=1.18475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569609 Jy ! Component: 100 - total flux cleaned = -0.000840955 Jy ! Component: 150 - total flux cleaned = -0.00120061 Jy ! Component: 200 - total flux cleaned = -0.00142015 Jy ! Total flux subtracted in 200 components = -0.00142015 Jy ! Clean residual min=-0.003372 max=0.002999 Jy/beam ! Clean residual mean=-0.000001 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 1.44205 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 152 components and 1.44205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056235Jy sigma=0.360450 ! Fit after self-cal, rms=0.056167Jy sigma=0.359870 wmodel J0121+1149_X_i_map.mod ! Writing 152 model components to file: J0121+1149_X_i_map.mod wobs J0121+1149_X_i_uvs.fits ! Writing UV FITS file: J0121+1149_X_i_uvs.fits wwins J0121+1149_X_i_map.win ! wwins: Wrote 10 windows to J0121+1149_X_i_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000901284 Jy ! Component: 100 - total flux cleaned = -0.00154187 Jy ! Component: 150 - total flux cleaned = -0.00186902 Jy ! Component: 200 - total flux cleaned = -0.00195712 Jy ! Component: 250 - total flux cleaned = -0.00221656 Jy ! Component: 300 - total flux cleaned = -0.00242741 Jy ! Component: 350 - total flux cleaned = -0.00259116 Jy ! Component: 400 - total flux cleaned = -0.00267135 Jy ! Component: 450 - total flux cleaned = -0.00290493 Jy ! Component: 500 - total flux cleaned = -0.00298164 Jy ! Component: 550 - total flux cleaned = -0.00316941 Jy ! Component: 600 - total flux cleaned = -0.00338964 Jy ! Component: 650 - total flux cleaned = -0.00342442 Jy ! Component: 700 - total flux cleaned = -0.0034601 Jy ! Component: 750 - total flux cleaned = -0.0035648 Jy ! Component: 800 - total flux cleaned = -0.00373576 Jy ! Component: 850 - total flux cleaned = -0.00360017 Jy ! Component: 900 - total flux cleaned = -0.00363389 Jy ! Component: 950 - total flux cleaned = -0.00369911 Jy ! Component: 1000 - total flux cleaned = -0.0037311 Jy ! Component: 1050 - total flux cleaned = -0.0037634 Jy ! Component: 1100 - total flux cleaned = -0.00388935 Jy ! Component: 1150 - total flux cleaned = -0.00395121 Jy ! Component: 1200 - total flux cleaned = -0.00401254 Jy ! Component: 1250 - total flux cleaned = -0.00407311 Jy ! Component: 1300 - total flux cleaned = -0.00416163 Jy ! Component: 1350 - total flux cleaned = -0.00416208 Jy ! Component: 1400 - total flux cleaned = -0.00430648 Jy ! Component: 1450 - total flux cleaned = -0.00439214 Jy ! Component: 1500 - total flux cleaned = -0.00450457 Jy ! Component: 1550 - total flux cleaned = -0.00472727 Jy ! Component: 1600 - total flux cleaned = -0.00480939 Jy ! Component: 1650 - total flux cleaned = -0.00491783 Jy ! Component: 1700 - total flux cleaned = -0.00507952 Jy ! Component: 1750 - total flux cleaned = -0.0051324 Jy ! Component: 1800 - total flux cleaned = -0.00534267 Jy ! Component: 1850 - total flux cleaned = -0.00534216 Jy ! Component: 1900 - total flux cleaned = -0.00547102 Jy ! Component: 1950 - total flux cleaned = -0.0055477 Jy ! Component: 2000 - total flux cleaned = -0.00557314 Jy ! Component: 2050 - total flux cleaned = -0.00564798 Jy ! Component: 2100 - total flux cleaned = -0.00572161 Jy ! Component: 2150 - total flux cleaned = -0.00577049 Jy ! Component: 2200 - total flux cleaned = -0.0058675 Jy ! Component: 2250 - total flux cleaned = -0.00577127 Jy ! Component: 2300 - total flux cleaned = -0.00579512 Jy ! Component: 2350 - total flux cleaned = -0.00581884 Jy ! Component: 2400 - total flux cleaned = -0.00584244 Jy ! Component: 2450 - total flux cleaned = -0.00591172 Jy ! Component: 2500 - total flux cleaned = -0.00593508 Jy ! Component: 2550 - total flux cleaned = -0.00593545 Jy ! Component: 2600 - total flux cleaned = -0.00602524 Jy ! Component: 2650 - total flux cleaned = -0.00604755 Jy ! Component: 2700 - total flux cleaned = -0.00606956 Jy ! Component: 2750 - total flux cleaned = -0.00609168 Jy ! Component: 2800 - total flux cleaned = -0.00606993 Jy ! Component: 2850 - total flux cleaned = -0.00609174 Jy ! Component: 2900 - total flux cleaned = -0.0061132 Jy ! Component: 2950 - total flux cleaned = -0.00611343 Jy ! Component: 3000 - total flux cleaned = -0.0061553 Jy ! Component: 3050 - total flux cleaned = -0.00607267 Jy ! Component: 3100 - total flux cleaned = -0.00611366 Jy ! Component: 3150 - total flux cleaned = -0.00611381 Jy ! Component: 3200 - total flux cleaned = -0.00617442 Jy ! Component: 3250 - total flux cleaned = -0.00613473 Jy ! Component: 3300 - total flux cleaned = -0.00613498 Jy ! Component: 3350 - total flux cleaned = -0.0062533 Jy ! Component: 3400 - total flux cleaned = -0.00617523 Jy ! Component: 3450 - total flux cleaned = -0.00621377 Jy ! Component: 3500 - total flux cleaned = -0.00621359 Jy ! Component: 3550 - total flux cleaned = -0.0062134 Jy ! Component: 3600 - total flux cleaned = -0.00621346 Jy ! Component: 3650 - total flux cleaned = -0.00623215 Jy ! Component: 3700 - total flux cleaned = -0.00625077 Jy ! Component: 3750 - total flux cleaned = -0.00613998 Jy ! Component: 3800 - total flux cleaned = -0.00623174 Jy ! Component: 3850 - total flux cleaned = -0.00617722 Jy ! Component: 3900 - total flux cleaned = -0.00615896 Jy ! Component: 3950 - total flux cleaned = -0.00608713 Jy ! Component: 4000 - total flux cleaned = -0.00603372 Jy ! Component: 4050 - total flux cleaned = -0.00606911 Jy ! Total flux subtracted in 4096 components = -0.00605147 Jy ! Clean residual min=-0.000876 max=0.000900 Jy/beam ! Clean residual mean=-0.000000 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 1.43599 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 457 components and 1.43599 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0121+1149_X_i_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8279 x 1.815 at -1.288 degrees (North through East) ! Clean map min=-0.0028427 max=0.71079 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0121+1149_X_i_map.fits wmodel /image_prod/ug002_uva//J0121+1149_X_i_map.mod ! Writing 457 model components to file: /image_prod/ug002_uva//J0121+1149_X_i_map.mod wobs /image_prod/ug002_uva//J0121+1149_X_i_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0121+1149_X_i_uvs.fits wwins /image_prod/ug002_uva//J0121+1149_X_i_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0121+1149_X_i_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.710793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000290664 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122679 0.122679 0.245357 0.490715 0.981429 1.96286 3.92572 7.85144 15.7029 31.4057 62.8115 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.71 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2445.41 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0121+1149_X_i_dfm.log closed on Wed Mar 4 19:01:43 2020