! Started logfile: /image_prod/ug002_uva//J0121+1149_X_g_dfm.log on Wed Mar  4 19:01:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J0121+1149_X_g_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0121+1149_X_g_uva.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.773545 visibilities/baseline/integration-bin.
! Found source: J0121+1149
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 8772 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0121+1149_X_g]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.433457Jy  sigma=8.173623
! Fit after  self-cal, rms=0.485284Jy  sigma=3.302530
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6304 mas, bmaj=1.626 mas, bpa=-4.695 degrees
! Estimated noise=1.73796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.609188 Jy
! Component: 100  -  total flux cleaned = 0.884145 Jy
! Total flux subtracted in 100 components = 0.884145 Jy
! Clean residual min=-0.077685 max=0.132304 Jy/beam
! Clean residual mean=-0.000012 rms=0.013621 Jy/beam
! Combined flux in latest and established models = 0.884144 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.884144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.404655Jy  sigma=2.123328
! Fit after  self-cal, rms=0.397024Jy  sigma=2.052293
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17497 Jy
! Component: 100  -  total flux cleaned = 0.279019 Jy
! Total flux subtracted in 100 components = 0.279019 Jy
! Clean residual min=-0.039704 max=0.114434 Jy/beam
! Clean residual mean=-0.000009 rms=0.008823 Jy/beam
! Combined flux in latest and established models = 1.16316 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 1.16316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.255814Jy  sigma=1.373606
! Fit after  self-cal, rms=0.252114Jy  sigma=1.340830
! Inverting map 
! Added new window around map position (-0.8, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106482 Jy
! Component: 100  -  total flux cleaned = 0.17389 Jy
! Total flux subtracted in 100 components = 0.17389 Jy
! Clean residual min=-0.030748 max=0.039735 Jy/beam
! Clean residual mean=-0.000007 rms=0.005867 Jy/beam
! Combined flux in latest and established models = 1.33705 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 23 components and 1.33705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.175662Jy  sigma=0.939154
! Fit after  self-cal, rms=0.170267Jy  sigma=0.905831
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0558323 Jy
! Component: 100  -  total flux cleaned = 0.0943097 Jy
! Total flux subtracted in 100 components = 0.0943097 Jy
! Clean residual min=-0.023363 max=0.032225 Jy/beam
! Clean residual mean=-0.000005 rms=0.004542 Jy/beam
! Combined flux in latest and established models = 1.43136 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 25 components and 1.43136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.136497Jy  sigma=0.740561
! Fit after  self-cal, rms=0.135173Jy  sigma=0.731629
! Inverting map 
! Added new window around map position (-0.6, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0367322 Jy
! Component: 100  -  total flux cleaned = 0.0638547 Jy
! Total flux subtracted in 100 components = 0.0638547 Jy
! Clean residual min=-0.018840 max=0.021449 Jy/beam
! Clean residual mean=-0.000005 rms=0.003893 Jy/beam
! Combined flux in latest and established models = 1.49522 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 1.49522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.118020Jy  sigma=0.651945
! Fit after  self-cal, rms=0.117579Jy  sigma=0.648961
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7583 mas, bmaj=1.821 mas, bpa=-5.397 degrees
! Estimated noise=1.28799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0301603 Jy
! Component: 100  -  total flux cleaned = 0.050966 Jy
! Component: 150  -  total flux cleaned = 0.0667291 Jy
! Component: 200  -  total flux cleaned = 0.0756142 Jy
! Total flux subtracted in 200 components = 0.0756142 Jy
! Clean residual min=-0.018212 max=0.019043 Jy/beam
! Clean residual mean=-0.000000 rms=0.003567 Jy/beam
! Combined flux in latest and established models = 1.57083 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 42 components and 1.57083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104672Jy  sigma=0.591977
! Fit after  self-cal, rms=0.104347Jy  sigma=0.589563
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7583 x 1.821 at -5.397 degrees (North through East)
! Clean map  min=-0.016019  max=0.78926 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.04     KP        1.00     
!   LA        0.98     MK        1.00     NL        0.93     OV        0.97     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.08     KP        1.00     
!   LA        0.97     MK        1.00     NL        0.93     OV        0.98     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.08     KP        0.99     
!   LA        0.98     MK        1.01     NL        0.94     OV        0.97     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.01     NL        0.93     OV        0.98     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.93     OV        0.98     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.07     KP        1.00     
!   LA        0.98     MK        1.01     NL        0.95     OV        0.97     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.05     KP        1.01     
!   LA        0.99     MK        1.02     NL        0.92     OV        0.97     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.99     MK        1.03     NL        0.93     OV        0.98     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.03     NL        0.95     OV        0.98     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.01     KP        1.01     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.05     KP        1.00     
!   LA        0.99     MK        1.03     NL        0.90     OV        1.00     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.11     KP        1.00     
!   LA        0.99     MK        1.03     NL        0.95     OV        1.00     
!   PT        1.04     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.104347Jy  sigma=0.589563
! Fit after  self-cal, rms=0.097122Jy  sigma=0.539178
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7631 mas, bmaj=1.828 mas, bpa=-5.373 degrees
! Estimated noise=1.29014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.6, 7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00764847 Jy
! Component: 100  -  total flux cleaned = 0.00954072 Jy
! Component: 150  -  total flux cleaned = 0.0114229 Jy
! Component: 200  -  total flux cleaned = 0.0126683 Jy
! Total flux subtracted in 200 components = 0.0126683 Jy
! Clean residual min=-0.013600 max=0.013902 Jy/beam
! Clean residual mean=-0.000001 rms=0.002812 Jy/beam
! Combined flux in latest and established models = 1.5835 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 64 components and 1.5835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092729Jy  sigma=0.515533
! Fit after  self-cal, rms=0.092620Jy  sigma=0.514550
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092620Jy  sigma=0.514550
! Fit after  self-cal, rms=0.068992Jy  sigma=0.384419
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7616 mas, bmaj=1.827 mas, bpa=-5.343 degrees
! Estimated noise=1.29377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00535523 Jy
! Component: 100  -  total flux cleaned = 0.00659421 Jy
! Component: 150  -  total flux cleaned = 0.00744537 Jy
! Component: 200  -  total flux cleaned = 0.00745043 Jy
! Total flux subtracted in 200 components = 0.00745043 Jy
! Clean residual min=-0.005818 max=0.009892 Jy/beam
! Clean residual mean=-0.000001 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 1.59095 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 81 components and 1.59095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067766Jy  sigma=0.377091
! Fit after  self-cal, rms=0.067660Jy  sigma=0.376479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798181 Jy
! Component: 100  -  total flux cleaned = 0.00936802 Jy
! Component: 150  -  total flux cleaned = 0.00965275 Jy
! Component: 200  -  total flux cleaned = 0.00951448 Jy
! Total flux subtracted in 200 components = 0.00951448 Jy
! Clean residual min=-0.005166 max=0.006281 Jy/beam
! Clean residual mean=-0.000000 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 1.60047 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 1.60047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066362Jy  sigma=0.369560
! Fit after  self-cal, rms=0.066284Jy  sigma=0.369331
! Inverting map 
! Added new window around map position (0.2, 12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268087 Jy
! Component: 100  -  total flux cleaned = 0.00343746 Jy
! Component: 150  -  total flux cleaned = 0.00436687 Jy
! Component: 200  -  total flux cleaned = 0.00473078 Jy
! Total flux subtracted in 200 components = 0.00473078 Jy
! Clean residual min=-0.005110 max=0.004299 Jy/beam
! Clean residual mean=-0.000000 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 1.6052 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 117 components and 1.6052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065492Jy  sigma=0.365051
! Fit after  self-cal, rms=0.065446Jy  sigma=0.364855
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065446Jy  sigma=0.364855
! Fit after  self-cal, rms=0.064107Jy  sigma=0.357426
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7614 mas, bmaj=1.826 mas, bpa=-5.352 degrees
! Estimated noise=1.2918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000647274 Jy
! Component: 100  -  total flux cleaned = 0.00148949 Jy
! Component: 150  -  total flux cleaned = 0.00250809 Jy
! Component: 200  -  total flux cleaned = 0.00301341 Jy
! Total flux subtracted in 200 components = 0.00301341 Jy
! Clean residual min=-0.003290 max=0.003294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 1.60821 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 1.60821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063594Jy  sigma=0.354492
! Fit after  self-cal, rms=0.063561Jy  sigma=0.354393
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333195 Jy
! Component: 100  -  total flux cleaned = 0.000505774 Jy
! Component: 150  -  total flux cleaned = 0.000760736 Jy
! Component: 200  -  total flux cleaned = 0.00100388 Jy
! Total flux subtracted in 200 components = 0.00100388 Jy
! Clean residual min=-0.003166 max=0.003080 Jy/beam
! Clean residual mean=-0.000000 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 1.60921 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 147 components and 1.60921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063332Jy  sigma=0.353161
! Fit after  self-cal, rms=0.063322Jy  sigma=0.353131
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063322Jy  sigma=0.353131
! Fit after  self-cal, rms=0.063269Jy  sigma=0.352824
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.858 mas, bmaj=2.54 mas, bpa=-4.369 degrees
! Estimated noise=1.98972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000303027 Jy
! Component: 100  -  total flux cleaned = 0.00149904 Jy
! Component: 150  -  total flux cleaned = 0.00252035 Jy
! Component: 200  -  total flux cleaned = 0.00323466 Jy
! Total flux subtracted in 200 components = 0.00323466 Jy
! Clean residual min=-0.003495 max=0.003520 Jy/beam
! Clean residual mean=-0.000000 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 1.61245 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 166 components and 1.61245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063157Jy  sigma=0.352375
! Fit after  self-cal, rms=0.063132Jy  sigma=0.352270
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258696 Jy
! Component: 100  -  total flux cleaned = 0.000739112 Jy
! Component: 150  -  total flux cleaned = 0.00122439 Jy
! Component: 200  -  total flux cleaned = 0.00175614 Jy
! Total flux subtracted in 200 components = 0.00175614 Jy
! Clean residual min=-0.003346 max=0.003266 Jy/beam
! Clean residual mean=0.000000 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 1.6142 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 171 components and 1.6142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063102Jy  sigma=0.352188
! Fit after  self-cal, rms=0.063092Jy  sigma=0.352155
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7614 mas, bmaj=1.826 mas, bpa=-5.363 degrees
! Estimated noise=1.29128 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7614 x 1.826 at -5.363 degrees (North through East)
! Clean map  min=-0.0039727  max=0.78861 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063092Jy  sigma=0.352155
! Fit after  self-cal, rms=0.060310Jy  sigma=0.331694
! Inverting map and beam 
! Estimated beam: bmin=0.7614 mas, bmaj=1.827 mas, bpa=-5.358 degrees
! Estimated noise=1.29152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129091 Jy
! Component: 100  -  total flux cleaned = -0.00154112 Jy
! Component: 150  -  total flux cleaned = -0.00184389 Jy
! Component: 200  -  total flux cleaned = -0.00184074 Jy
! Total flux subtracted in 200 components = -0.00184074 Jy
! Clean residual min=-0.002786 max=0.002712 Jy/beam
! Clean residual mean=0.000000 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 1.61236 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 182 components and 1.61236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060119Jy  sigma=0.330500
! Fit after  self-cal, rms=0.060113Jy  sigma=0.330471
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287467 Jy
! Component: 100  -  total flux cleaned = -0.000224709 Jy
! Component: 150  -  total flux cleaned = -0.000289284 Jy
! Component: 200  -  total flux cleaned = -0.000169945 Jy
! Total flux subtracted in 200 components = -0.000169945 Jy
! Clean residual min=-0.002666 max=0.002591 Jy/beam
! Clean residual mean=0.000000 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 1.61219 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 191 components and 1.61219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059990Jy  sigma=0.329753
! Fit after  self-cal, rms=0.059989Jy  sigma=0.329739
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059989Jy  sigma=0.329739
! Fit after  self-cal, rms=0.059992Jy  sigma=0.329693
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6323 mas, bmaj=1.631 mas, bpa=-4.688 degrees
! Estimated noise=1.75204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.622294 Jy
! Component: 100  -  total flux cleaned = 0.918974 Jy
! Component: 150  -  total flux cleaned = 1.09929 Jy
! Component: 200  -  total flux cleaned = 1.21961 Jy
! Total flux subtracted in 200 components = 1.21961 Jy
! Clean residual min=-0.025417 max=0.065731 Jy/beam
! Clean residual mean=-0.000006 rms=0.006196 Jy/beam
! Combined flux in latest and established models = 1.21961 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.21961 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7614 mas, bmaj=1.827 mas, bpa=-5.362 degrees
! Estimated noise=1.29145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110874 Jy
! Component: 100  -  total flux cleaned = 0.183872 Jy
! Component: 150  -  total flux cleaned = 0.235671 Jy
! Component: 200  -  total flux cleaned = 0.273293 Jy
! Total flux subtracted in 200 components = 0.273293 Jy
! Clean residual min=-0.009304 max=0.021396 Jy/beam
! Clean residual mean=-0.000004 rms=0.002507 Jy/beam
! Combined flux in latest and established models = 1.4929 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 38 components and 1.4929 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278501 Jy
! Component: 100  -  total flux cleaned = 0.0485869 Jy
! Component: 150  -  total flux cleaned = 0.0641087 Jy
! Component: 200  -  total flux cleaned = 0.075972 Jy
! Total flux subtracted in 200 components = 0.075972 Jy
! Clean residual min=-0.004917 max=0.006989 Jy/beam
! Clean residual mean=-0.000001 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 1.56887 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 47 components and 1.56887 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00938381 Jy
! Component: 100  -  total flux cleaned = 0.016952 Jy
! Component: 150  -  total flux cleaned = 0.0219457 Jy
! Component: 200  -  total flux cleaned = 0.0259414 Jy
! Total flux subtracted in 200 components = 0.0259414 Jy
! Clean residual min=-0.003867 max=0.004064 Jy/beam
! Clean residual mean=-0.000000 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 1.59482 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 55 components and 1.59482 Jy
! Inverting map 
! Added new window around map position (8.2, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384348 Jy
! Component: 100  -  total flux cleaned = 0.0064864 Jy
! Component: 150  -  total flux cleaned = 0.00901518 Jy
! Component: 200  -  total flux cleaned = 0.0107859 Jy
! Total flux subtracted in 200 components = 0.0107859 Jy
! Clean residual min=-0.003307 max=0.003214 Jy/beam
! Clean residual mean=-0.000000 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 1.6056 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 69 components and 1.6056 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.858 mas, bmaj=2.539 mas, bpa=-4.367 degrees
! Estimated noise=1.98995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375077 Jy
! Component: 100  -  total flux cleaned = 0.00610712 Jy
! Component: 150  -  total flux cleaned = 0.00793003 Jy
! Component: 200  -  total flux cleaned = 0.00921001 Jy
! Total flux subtracted in 200 components = 0.00921001 Jy
! Clean residual min=-0.003076 max=0.003250 Jy/beam
! Clean residual mean=-0.000000 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 1.61481 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449799 Jy
! Component: 100  -  total flux cleaned = 0.000865414 Jy
! Component: 150  -  total flux cleaned = 0.00125083 Jy
! Component: 200  -  total flux cleaned = 0.00151967 Jy
! Total flux subtracted in 200 components = 0.00151967 Jy
! Clean residual min=-0.002904 max=0.003116 Jy/beam
! Clean residual mean=0.000000 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 1.61633 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 108 components and 1.61633 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7614 mas, bmaj=1.827 mas, bpa=-5.362 degrees
! Estimated noise=1.29145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396781 Jy
! Component: 100  -  total flux cleaned = 0.00072013 Jy
! Component: 150  -  total flux cleaned = 0.000823655 Jy
! Component: 200  -  total flux cleaned = 0.000919585 Jy
! Total flux subtracted in 200 components = 0.000919585 Jy
! Clean residual min=-0.002658 max=0.003084 Jy/beam
! Clean residual mean=0.000000 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 1.61725 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 126 components and 1.61725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060297Jy  sigma=0.331680
! Fit after  self-cal, rms=0.060236Jy  sigma=0.331104
wmodel J0121+1149_X_g_map.mod
! Writing 126 model components to file: J0121+1149_X_g_map.mod
wobs   J0121+1149_X_g_uvs.fits
! Writing UV FITS file: J0121+1149_X_g_uvs.fits
wwins  J0121+1149_X_g_map.win
! wwins: Wrote 7 windows to J0121+1149_X_g_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498247 Jy
! Component: 100  -  total flux cleaned = 0.000640776 Jy
! Component: 150  -  total flux cleaned = 0.000731448 Jy
! Component: 200  -  total flux cleaned = 0.00095017 Jy
! Component: 250  -  total flux cleaned = 0.00107651 Jy
! Component: 300  -  total flux cleaned = 0.00119897 Jy
! Component: 350  -  total flux cleaned = 0.0013593 Jy
! Component: 400  -  total flux cleaned = 0.00163343 Jy
! Component: 450  -  total flux cleaned = 0.00182537 Jy
! Component: 500  -  total flux cleaned = 0.00201367 Jy
! Component: 550  -  total flux cleaned = 0.00219794 Jy
! Component: 600  -  total flux cleaned = 0.0023431 Jy
! Component: 650  -  total flux cleaned = 0.00248547 Jy
! Component: 700  -  total flux cleaned = 0.00259001 Jy
! Component: 750  -  total flux cleaned = 0.00255458 Jy
! Component: 800  -  total flux cleaned = 0.00252066 Jy
! Component: 850  -  total flux cleaned = 0.00258831 Jy
! Component: 900  -  total flux cleaned = 0.00255556 Jy
! Component: 950  -  total flux cleaned = 0.00255602 Jy
! Component: 1000  -  total flux cleaned = 0.00252318 Jy
! Component: 1050  -  total flux cleaned = 0.00242716 Jy
! Component: 1100  -  total flux cleaned = 0.0024586 Jy
! Component: 1150  -  total flux cleaned = 0.0024898 Jy
! Component: 1200  -  total flux cleaned = 0.00252015 Jy
! Component: 1250  -  total flux cleaned = 0.0025811 Jy
! Component: 1300  -  total flux cleaned = 0.00255025 Jy
! Component: 1350  -  total flux cleaned = 0.00264045 Jy
! Component: 1400  -  total flux cleaned = 0.0027292 Jy
! Component: 1450  -  total flux cleaned = 0.00272903 Jy
! Component: 1500  -  total flux cleaned = 0.00281613 Jy
! Component: 1550  -  total flux cleaned = 0.00284504 Jy
! Component: 1600  -  total flux cleaned = 0.00281613 Jy
! Component: 1650  -  total flux cleaned = 0.00278781 Jy
! Component: 1700  -  total flux cleaned = 0.0027879 Jy
! Component: 1750  -  total flux cleaned = 0.00287076 Jy
! Component: 1800  -  total flux cleaned = 0.00284317 Jy
! Component: 1850  -  total flux cleaned = 0.00287029 Jy
! Component: 1900  -  total flux cleaned = 0.0028701 Jy
! Component: 1950  -  total flux cleaned = 0.00289674 Jy
! Component: 2000  -  total flux cleaned = 0.00292337 Jy
! Component: 2050  -  total flux cleaned = 0.00289689 Jy
! Component: 2100  -  total flux cleaned = 0.0028709 Jy
! Component: 2150  -  total flux cleaned = 0.00281901 Jy
! Component: 2200  -  total flux cleaned = 0.00292129 Jy
! Component: 2250  -  total flux cleaned = 0.00287055 Jy
! Component: 2300  -  total flux cleaned = 0.00297154 Jy
! Component: 2350  -  total flux cleaned = 0.00297161 Jy
! Component: 2400  -  total flux cleaned = 0.00297139 Jy
! Component: 2450  -  total flux cleaned = 0.00299582 Jy
! Component: 2500  -  total flux cleaned = 0.00299581 Jy
! Component: 2550  -  total flux cleaned = 0.00309287 Jy
! Component: 2600  -  total flux cleaned = 0.00302089 Jy
! Component: 2650  -  total flux cleaned = 0.00306857 Jy
! Component: 2700  -  total flux cleaned = 0.0031161 Jy
! Component: 2750  -  total flux cleaned = 0.00318644 Jy
! Component: 2800  -  total flux cleaned = 0.0032329 Jy
! Component: 2850  -  total flux cleaned = 0.00320976 Jy
! Component: 2900  -  total flux cleaned = 0.00320977 Jy
! Component: 2950  -  total flux cleaned = 0.00323248 Jy
! Component: 3000  -  total flux cleaned = 0.00320997 Jy
! Component: 3050  -  total flux cleaned = 0.00327761 Jy
! Component: 3100  -  total flux cleaned = 0.00330014 Jy
! Component: 3150  -  total flux cleaned = 0.00327789 Jy
! Component: 3200  -  total flux cleaned = 0.00338836 Jy
! Component: 3250  -  total flux cleaned = 0.0034539 Jy
! Component: 3300  -  total flux cleaned = 0.00345389 Jy
! Component: 3350  -  total flux cleaned = 0.00354057 Jy
! Component: 3400  -  total flux cleaned = 0.00349786 Jy
! Component: 3450  -  total flux cleaned = 0.00356203 Jy
! Component: 3500  -  total flux cleaned = 0.00358311 Jy
! Component: 3550  -  total flux cleaned = 0.00364631 Jy
! Component: 3600  -  total flux cleaned = 0.00370898 Jy
! Component: 3650  -  total flux cleaned = 0.00364655 Jy
! Component: 3700  -  total flux cleaned = 0.00370861 Jy
! Component: 3750  -  total flux cleaned = 0.00379055 Jy
! Component: 3800  -  total flux cleaned = 0.00370901 Jy
! Component: 3850  -  total flux cleaned = 0.00383087 Jy
! Component: 3900  -  total flux cleaned = 0.00379068 Jy
! Component: 3950  -  total flux cleaned = 0.00385078 Jy
! Component: 4000  -  total flux cleaned = 0.00379119 Jy
! Component: 4050  -  total flux cleaned = 0.00388994 Jy
! Total flux subtracted in 4096 components = 0.00387029 Jy
! Clean residual min=-0.001315 max=0.001059 Jy/beam
! Clean residual mean=0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 1.62112 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 422 components and 1.62112 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0121+1149_X_g_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7614 x 1.827 at -5.362 degrees (North through East)
! Clean map  min=-0.0018696  max=0.78692 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0121+1149_X_g_map.fits
wmodel /image_prod/ug002_uva//J0121+1149_X_g_map.mod
! Writing 422 model components to file: /image_prod/ug002_uva//J0121+1149_X_g_map.mod
wobs   /image_prod/ug002_uva//J0121+1149_X_g_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0121+1149_X_g_uvs.fits
wwins  /image_prod/ug002_uva//J0121+1149_X_g_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0121+1149_X_g_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.786923 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000326051 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.124301 0.124301 0.248602 0.497205 0.994409 1.98882 3.97764 7.95527 15.9105 31.8211 63.6422
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.786 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2413.49 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0121+1149_X_g_dfm.log closed on Wed Mar  4 19:01:31 2020