! Started logfile: /image_prod/ug002_uva//J0121+1149_X_f_dfm.log on Wed Mar 4 19:01:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0121+1149_X_f_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0121+1149_X_f_uva.fits ! AN table 1: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.722222 visibilities/baseline/integration-bin. ! Found source: J0121+1149 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 4368 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0121+1149_X_f] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.456604Jy sigma=8.013226 ! Fit after self-cal, rms=0.495237Jy sigma=3.146172 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6255 mas, bmaj=1.514 mas, bpa=-9.84 degrees ! Estimated noise=2.3345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.609658 Jy ! Component: 100 - total flux cleaned = 0.881391 Jy ! Total flux subtracted in 100 components = 0.881391 Jy ! Clean residual min=-0.089869 max=0.153021 Jy/beam ! Clean residual mean=0.000084 rms=0.018047 Jy/beam ! Combined flux in latest and established models = 0.881391 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.881391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.424126Jy sigma=2.153123 ! Fit after self-cal, rms=0.416688Jy sigma=2.081980 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184215 Jy ! Component: 100 - total flux cleaned = 0.307015 Jy ! Total flux subtracted in 100 components = 0.307015 Jy ! Clean residual min=-0.055406 max=0.095338 Jy/beam ! Clean residual mean=0.000056 rms=0.011714 Jy/beam ! Combined flux in latest and established models = 1.18841 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 1.18841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.273236Jy sigma=1.388205 ! Fit after self-cal, rms=0.267575Jy sigma=1.349604 ! Inverting map ! Added new window around map position (-0.8, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109783 Jy ! Component: 100 - total flux cleaned = 0.181808 Jy ! Total flux subtracted in 100 components = 0.181808 Jy ! Clean residual min=-0.036363 max=0.050458 Jy/beam ! Clean residual mean=0.000040 rms=0.008022 Jy/beam ! Combined flux in latest and established models = 1.37021 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 1.37021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.196124Jy sigma=0.994442 ! Fit after self-cal, rms=0.192354Jy sigma=0.970452 ! Inverting map ! Added new window around map position (-0.4, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0632329 Jy ! Component: 100 - total flux cleaned = 0.110667 Jy ! Total flux subtracted in 100 components = 0.110667 Jy ! Clean residual min=-0.027790 max=0.028933 Jy/beam ! Clean residual mean=0.000032 rms=0.006110 Jy/beam ! Combined flux in latest and established models = 1.48088 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 1.48088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156385Jy sigma=0.799590 ! Fit after self-cal, rms=0.155476Jy sigma=0.794353 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7371 mas, bmaj=1.708 mas, bpa=-9.781 degrees ! Estimated noise=1.86785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0505718 Jy ! Component: 100 - total flux cleaned = 0.0867727 Jy ! Component: 150 - total flux cleaned = 0.114329 Jy ! Component: 200 - total flux cleaned = 0.136077 Jy ! Total flux subtracted in 200 components = 0.136077 Jy ! Clean residual min=-0.029935 max=0.034230 Jy/beam ! Clean residual mean=0.000031 rms=0.006365 Jy/beam ! Combined flux in latest and established models = 1.61696 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 41 components and 1.61696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125251Jy sigma=0.661322 ! Fit after self-cal, rms=0.124399Jy sigma=0.656361 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7371 x 1.708 at -9.781 degrees (North through East) ! Clean map min=-0.02693 max=0.81966 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 0.95 KP 0.99 ! MK 1.01 NL 1.11 OV 0.86 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.97 KP 0.98 ! MK 0.98 NL 1.15 OV 0.87 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.94 KP 1.00 ! MK 1.01 NL 1.13 OV 0.88 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.98 KP 0.99 ! MK 1.03 NL 1.11 OV 0.89 SC 1.08 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.98 KP 1.01 ! MK 1.00 NL 1.11 OV 0.89 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.99 KP 0.99 ! MK 1.00 NL 1.11 OV 0.88 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.97 KP 1.00 ! MK 1.01 NL 1.11 OV 0.89 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.98 KP 1.02 ! MK 0.97 NL 1.09 OV 0.91 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 1.00 ! MK 1.03 NL 1.13 OV 0.86 SC 1.09 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.97 KP 0.99 ! MK 1.04 NL 1.16 OV 0.89 SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 1.01 ! MK 1.01 NL 1.13 OV 0.90 SC 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.02 KP 0.97 ! MK 1.10 NL 1.16 OV 0.90 SC 1.05 ! ! ! Fit before self-cal, rms=0.124399Jy sigma=0.656361 ! Fit after self-cal, rms=0.070003Jy sigma=0.394591 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7459 mas, bmaj=1.727 mas, bpa=-9.926 degrees ! Estimated noise=1.84975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020939 Jy ! Component: 100 - total flux cleaned = 0.0329655 Jy ! Component: 150 - total flux cleaned = 0.0388019 Jy ! Component: 200 - total flux cleaned = 0.0407928 Jy ! Total flux subtracted in 200 components = 0.0407928 Jy ! Clean residual min=-0.008810 max=0.011304 Jy/beam ! Clean residual mean=0.000012 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 1.65775 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 1.65775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062173Jy sigma=0.354224 ! Fit after self-cal, rms=0.061480Jy sigma=0.350815 ! Inverting map ! Added new window around map position (0.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726008 Jy ! Component: 100 - total flux cleaned = 0.0101038 Jy ! Component: 150 - total flux cleaned = 0.012899 Jy ! Component: 200 - total flux cleaned = 0.0158742 Jy ! Total flux subtracted in 200 components = 0.0158742 Jy ! Clean residual min=-0.007881 max=0.006309 Jy/beam ! Clean residual mean=0.000009 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 1.67363 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 1.67363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059143Jy sigma=0.338156 ! Fit after self-cal, rms=0.059060Jy sigma=0.337756 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059060Jy sigma=0.337756 ! Fit after self-cal, rms=0.054916Jy sigma=0.315985 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7476 mas, bmaj=1.719 mas, bpa=-9.858 degrees ! Estimated noise=1.85127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336247 Jy ! Component: 100 - total flux cleaned = 0.00498618 Jy ! Component: 150 - total flux cleaned = 0.00605873 Jy ! Component: 200 - total flux cleaned = 0.006722 Jy ! Total flux subtracted in 200 components = 0.006722 Jy ! Clean residual min=-0.004537 max=0.003932 Jy/beam ! Clean residual mean=0.000005 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 1.68035 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 1.68035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054317Jy sigma=0.312611 ! Fit after self-cal, rms=0.054292Jy sigma=0.312488 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134443 Jy ! Component: 100 - total flux cleaned = 0.00201259 Jy ! Component: 150 - total flux cleaned = 0.00224824 Jy ! Component: 200 - total flux cleaned = 0.00246441 Jy ! Total flux subtracted in 200 components = 0.00246441 Jy ! Clean residual min=-0.004387 max=0.003740 Jy/beam ! Clean residual mean=0.000005 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 1.68281 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 1.68281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054081Jy sigma=0.311259 ! Fit after self-cal, rms=0.054060Jy sigma=0.311216 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054060Jy sigma=0.311216 ! Fit after self-cal, rms=0.053972Jy sigma=0.310770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7481 mas, bmaj=1.718 mas, bpa=-9.853 degrees ! Estimated noise=1.85231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100747 Jy ! Component: 100 - total flux cleaned = 0.00116031 Jy ! Component: 150 - total flux cleaned = 0.00158902 Jy ! Component: 200 - total flux cleaned = 0.00185569 Jy ! Total flux subtracted in 200 components = 0.00185569 Jy ! Clean residual min=-0.003856 max=0.003563 Jy/beam ! Clean residual mean=0.000004 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 1.68467 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 1.68467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053782Jy sigma=0.309662 ! Fit after self-cal, rms=0.053771Jy sigma=0.309634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463857 Jy ! Component: 100 - total flux cleaned = 0.000465324 Jy ! Component: 150 - total flux cleaned = 0.000695445 Jy ! Component: 200 - total flux cleaned = 0.000641243 Jy ! Total flux subtracted in 200 components = 0.000641243 Jy ! Clean residual min=-0.003755 max=0.003498 Jy/beam ! Clean residual mean=0.000004 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 1.68531 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 1.68531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053661Jy sigma=0.308975 ! Fit after self-cal, rms=0.053650Jy sigma=0.308958 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053650Jy sigma=0.308958 ! Fit after self-cal, rms=0.053646Jy sigma=0.308823 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.718 mas, bmaj=2.211 mas, bpa=-4.293 degrees ! Estimated noise=2.80508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175372 Jy ! Component: 100 - total flux cleaned = 0.00271206 Jy ! Component: 150 - total flux cleaned = 0.00311189 Jy ! Component: 200 - total flux cleaned = 0.00337278 Jy ! Total flux subtracted in 200 components = 0.00337278 Jy ! Clean residual min=-0.003399 max=0.003257 Jy/beam ! Clean residual mean=0.000010 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 1.68868 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 104 components and 1.68868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053633Jy sigma=0.308705 ! Fit after self-cal, rms=0.053622Jy sigma=0.308683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541811 Jy ! Component: 100 - total flux cleaned = 0.000692606 Jy ! Component: 150 - total flux cleaned = 0.000764514 Jy ! Component: 200 - total flux cleaned = 0.000817391 Jy ! Total flux subtracted in 200 components = 0.000817391 Jy ! Clean residual min=-0.003398 max=0.003267 Jy/beam ! Clean residual mean=0.000010 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 1.6895 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 1.6895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053621Jy sigma=0.308690 ! Fit after self-cal, rms=0.053617Jy sigma=0.308687 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7482 mas, bmaj=1.718 mas, bpa=-9.855 degrees ! Estimated noise=1.85288 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7482 x 1.718 at -9.855 degrees (North through East) ! Clean map min=-0.0029863 max=0.81304 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053617Jy sigma=0.308687 ! Fit after self-cal, rms=0.050627Jy sigma=0.284123 ! Inverting map and beam ! Estimated beam: bmin=0.7485 mas, bmaj=1.717 mas, bpa=-9.842 degrees ! Estimated noise=1.85325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000457185 Jy ! Component: 100 - total flux cleaned = -0.00039223 Jy ! Component: 150 - total flux cleaned = -0.000395812 Jy ! Component: 200 - total flux cleaned = -0.000348459 Jy ! Total flux subtracted in 200 components = -0.000348459 Jy ! Clean residual min=-0.003145 max=0.003118 Jy/beam ! Clean residual mean=0.000003 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 1.68915 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 1.68915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050495Jy sigma=0.283361 ! Fit after self-cal, rms=0.050489Jy sigma=0.283340 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022737 Jy ! Component: 100 - total flux cleaned = 0.000133775 Jy ! Component: 150 - total flux cleaned = 4.40847e-05 Jy ! Component: 200 - total flux cleaned = -8.20729e-05 Jy ! Total flux subtracted in 200 components = -8.20729e-05 Jy ! Clean residual min=-0.003113 max=0.003088 Jy/beam ! Clean residual mean=0.000003 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 1.68907 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 1.68907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050419Jy sigma=0.282903 ! Fit after self-cal, rms=0.050415Jy sigma=0.282894 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050415Jy sigma=0.282894 ! Fit after self-cal, rms=0.050438Jy sigma=0.282840 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6345 mas, bmaj=1.514 mas, bpa=-9.73 degrees ! Estimated noise=2.33149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.61207 Jy ! Component: 100 - total flux cleaned = 0.907839 Jy ! Component: 150 - total flux cleaned = 1.09766 Jy ! Component: 200 - total flux cleaned = 1.22668 Jy ! Total flux subtracted in 200 components = 1.22668 Jy ! Clean residual min=-0.036257 max=0.071138 Jy/beam ! Clean residual mean=0.000045 rms=0.008687 Jy/beam ! Combined flux in latest and established models = 1.22668 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.22668 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7485 mas, bmaj=1.717 mas, bpa=-9.847 degrees ! Estimated noise=1.85391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113874 Jy ! Component: 100 - total flux cleaned = 0.192106 Jy ! Component: 150 - total flux cleaned = 0.250284 Jy ! Component: 200 - total flux cleaned = 0.294147 Jy ! Total flux subtracted in 200 components = 0.294147 Jy ! Clean residual min=-0.013352 max=0.025302 Jy/beam ! Clean residual mean=0.000034 rms=0.003805 Jy/beam ! Combined flux in latest and established models = 1.52083 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 1.52083 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.03351 Jy ! Component: 100 - total flux cleaned = 0.0594406 Jy ! Component: 150 - total flux cleaned = 0.0796227 Jy ! Component: 200 - total flux cleaned = 0.0954614 Jy ! Total flux subtracted in 200 components = 0.0954614 Jy ! Clean residual min=-0.006833 max=0.009371 Jy/beam ! Clean residual mean=0.000016 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 1.61629 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 1.61629 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127805 Jy ! Component: 100 - total flux cleaned = 0.0233884 Jy ! Component: 150 - total flux cleaned = 0.0322575 Jy ! Component: 200 - total flux cleaned = 0.0397109 Jy ! Total flux subtracted in 200 components = 0.0397109 Jy ! Clean residual min=-0.005062 max=0.005157 Jy/beam ! Clean residual mean=0.000009 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 1.656 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 1.656 Jy ! Inverting map ! Added new window around map position (-2, -14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642333 Jy ! Component: 100 - total flux cleaned = 0.0118869 Jy ! Component: 150 - total flux cleaned = 0.0154899 Jy ! Component: 200 - total flux cleaned = 0.0184751 Jy ! Total flux subtracted in 200 components = 0.0184751 Jy ! Clean residual min=-0.004261 max=0.003447 Jy/beam ! Clean residual mean=0.000006 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 1.67448 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 1.67448 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.718 mas, bmaj=2.21 mas, bpa=-4.285 degrees ! Estimated noise=2.80598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502224 Jy ! Component: 100 - total flux cleaned = 0.00802172 Jy ! Component: 150 - total flux cleaned = 0.0102791 Jy ! Component: 200 - total flux cleaned = 0.011634 Jy ! Total flux subtracted in 200 components = 0.011634 Jy ! Clean residual min=-0.003446 max=0.003321 Jy/beam ! Clean residual mean=0.000012 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 1.68611 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109968 Jy ! Component: 100 - total flux cleaned = 0.00188016 Jy ! Component: 150 - total flux cleaned = 0.00241986 Jy ! Component: 200 - total flux cleaned = 0.00289681 Jy ! Total flux subtracted in 200 components = 0.00289681 Jy ! Clean residual min=-0.003209 max=0.003076 Jy/beam ! Clean residual mean=0.000010 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 1.68901 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 97 components and 1.68901 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7485 mas, bmaj=1.717 mas, bpa=-9.847 degrees ! Estimated noise=1.85391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179266 Jy ! Component: 100 - total flux cleaned = 7.04034e-05 Jy ! Component: 150 - total flux cleaned = 6.79368e-05 Jy ! Component: 200 - total flux cleaned = 6.65763e-05 Jy ! Total flux subtracted in 200 components = 6.65763e-05 Jy ! Clean residual min=-0.003914 max=0.003675 Jy/beam ! Clean residual mean=0.000003 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 1.68907 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 1.68907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050903Jy sigma=0.285932 ! Fit after self-cal, rms=0.050854Jy sigma=0.285638 wmodel J0121+1149_X_f_map.mod ! Writing 108 model components to file: J0121+1149_X_f_map.mod wobs J0121+1149_X_f_uvs.fits ! Writing UV FITS file: J0121+1149_X_f_uvs.fits wwins J0121+1149_X_f_map.win ! wwins: Wrote 5 windows to J0121+1149_X_f_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103001 Jy ! Component: 100 - total flux cleaned = -0.00180215 Jy ! Component: 150 - total flux cleaned = -0.00240866 Jy ! Component: 200 - total flux cleaned = -0.00303468 Jy ! Component: 250 - total flux cleaned = -0.00363108 Jy ! Component: 300 - total flux cleaned = -0.00396807 Jy ! Component: 350 - total flux cleaned = -0.00429345 Jy ! Component: 400 - total flux cleaned = -0.00456387 Jy ! Component: 450 - total flux cleaned = -0.0047387 Jy ! Component: 500 - total flux cleaned = -0.00473764 Jy ! Component: 550 - total flux cleaned = -0.00473777 Jy ! Component: 600 - total flux cleaned = -0.00473761 Jy ! Component: 650 - total flux cleaned = -0.00473746 Jy ! Component: 700 - total flux cleaned = -0.00481608 Jy ! Component: 750 - total flux cleaned = -0.00473758 Jy ! Component: 800 - total flux cleaned = -0.00477525 Jy ! Component: 850 - total flux cleaned = -0.00477492 Jy ! Component: 900 - total flux cleaned = -0.00459072 Jy ! Component: 950 - total flux cleaned = -0.00466305 Jy ! Component: 1000 - total flux cleaned = -0.00459131 Jy ! Component: 1050 - total flux cleaned = -0.00452096 Jy ! Component: 1100 - total flux cleaned = -0.00452078 Jy ! Component: 1150 - total flux cleaned = -0.00458872 Jy ! Component: 1200 - total flux cleaned = -0.00462196 Jy ! Component: 1250 - total flux cleaned = -0.00455601 Jy ! Component: 1300 - total flux cleaned = -0.00462094 Jy ! Component: 1350 - total flux cleaned = -0.0045558 Jy ! Component: 1400 - total flux cleaned = -0.00474729 Jy ! Component: 1450 - total flux cleaned = -0.00468361 Jy ! Component: 1500 - total flux cleaned = -0.00468309 Jy ! Component: 1550 - total flux cleaned = -0.00492939 Jy ! Component: 1600 - total flux cleaned = -0.00486813 Jy ! Component: 1650 - total flux cleaned = -0.00495837 Jy ! Component: 1700 - total flux cleaned = -0.00504744 Jy ! Component: 1750 - total flux cleaned = -0.00510643 Jy ! Component: 1800 - total flux cleaned = -0.00522258 Jy ! Component: 1850 - total flux cleaned = -0.00539542 Jy ! Component: 1900 - total flux cleaned = -0.00550955 Jy ! Component: 1950 - total flux cleaned = -0.00553774 Jy ! Component: 2000 - total flux cleaned = -0.00562138 Jy ! Component: 2050 - total flux cleaned = -0.00584226 Jy ! Component: 2100 - total flux cleaned = -0.00595155 Jy ! Component: 2150 - total flux cleaned = -0.0061136 Jy ! Component: 2200 - total flux cleaned = -0.00619411 Jy ! Component: 2250 - total flux cleaned = -0.00627341 Jy ! Component: 2300 - total flux cleaned = -0.00645742 Jy ! Component: 2350 - total flux cleaned = -0.00656174 Jy ! Component: 2400 - total flux cleaned = -0.00669037 Jy ! Component: 2450 - total flux cleaned = -0.00681809 Jy ! Component: 2500 - total flux cleaned = -0.0068435 Jy ! Component: 2550 - total flux cleaned = -0.00706957 Jy ! Component: 2600 - total flux cleaned = -0.00719399 Jy ! Component: 2650 - total flux cleaned = -0.00729289 Jy ! Component: 2700 - total flux cleaned = -0.00751269 Jy ! Component: 2750 - total flux cleaned = -0.00753657 Jy ! Component: 2800 - total flux cleaned = -0.00758476 Jy ! Component: 2850 - total flux cleaned = -0.00765624 Jy ! Component: 2900 - total flux cleaned = -0.00786892 Jy ! Component: 2950 - total flux cleaned = -0.0079859 Jy ! Component: 3000 - total flux cleaned = -0.00805559 Jy ! Component: 3050 - total flux cleaned = -0.00826268 Jy ! Component: 3100 - total flux cleaned = -0.00828514 Jy ! Component: 3150 - total flux cleaned = -0.00837597 Jy ! Component: 3200 - total flux cleaned = -0.00846615 Jy ! Component: 3250 - total flux cleaned = -0.00860033 Jy ! Component: 3300 - total flux cleaned = -0.00871115 Jy ! Component: 3350 - total flux cleaned = -0.00882106 Jy ! Component: 3400 - total flux cleaned = -0.00897387 Jy ! Component: 3450 - total flux cleaned = -0.00899547 Jy ! Component: 3500 - total flux cleaned = -0.00916786 Jy ! Component: 3550 - total flux cleaned = -0.00925351 Jy ! Component: 3600 - total flux cleaned = -0.00933854 Jy ! Component: 3650 - total flux cleaned = -0.009444 Jy ! Component: 3700 - total flux cleaned = -0.00948603 Jy ! Component: 3750 - total flux cleaned = -0.00965217 Jy ! Component: 3800 - total flux cleaned = -0.00975533 Jy ! Component: 3850 - total flux cleaned = -0.00991888 Jy ! Component: 3900 - total flux cleaned = -0.0100816 Jy ! Component: 3950 - total flux cleaned = -0.0102025 Jy ! Component: 4000 - total flux cleaned = -0.0102227 Jy ! Component: 4050 - total flux cleaned = -0.0103421 Jy ! Total flux subtracted in 4096 components = -0.0103817 Jy ! Clean residual min=-0.001100 max=0.001354 Jy/beam ! Clean residual mean=0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 1.67869 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 412 components and 1.67869 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0121+1149_X_f_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7485 x 1.717 at -9.847 degrees (North through East) ! Clean map min=-0.0024314 max=0.80827 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0121+1149_X_f_map.fits wmodel /image_prod/ug002_uva//J0121+1149_X_f_map.mod ! Writing 412 model components to file: /image_prod/ug002_uva//J0121+1149_X_f_map.mod wobs /image_prod/ug002_uva//J0121+1149_X_f_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0121+1149_X_f_uvs.fits wwins /image_prod/ug002_uva//J0121+1149_X_f_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uva//J0121+1149_X_f_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.808269 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000328344 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.121869 0.121869 0.243738 0.487477 0.974953 1.94991 3.89981 7.79963 15.5993 31.1985 62.397 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.808 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2461.66 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0121+1149_X_f_dfm.log closed on Wed Mar 4 19:01:25 2020