! Started logfile: /image_prod/ug002_uva//J0121+1149_X_d_dfm.log on Wed Mar 4 19:01:08 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0121+1149_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0121+1149_X_d_uva.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 6 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.799383 visibilities/baseline/integration-bin. ! Found source: J0121+1149 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6216 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0121+1149_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.537176Jy sigma=7.858875 ! Fit after self-cal, rms=0.516969Jy sigma=2.856078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6175 mas, bmaj=1.559 mas, bpa=-5.092 degrees ! Estimated noise=2.23498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.707631 Jy ! Component: 100 - total flux cleaned = 1.00529 Jy ! Total flux subtracted in 100 components = 1.00529 Jy ! Clean residual min=-0.085724 max=0.139226 Jy/beam ! Clean residual mean=-0.000070 rms=0.014804 Jy/beam ! Combined flux in latest and established models = 1.00529 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.00529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.450910Jy sigma=2.076175 ! Fit after self-cal, rms=0.445765Jy sigma=2.028734 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176039 Jy ! Component: 100 - total flux cleaned = 0.284922 Jy ! Total flux subtracted in 100 components = 0.284922 Jy ! Clean residual min=-0.051701 max=0.121633 Jy/beam ! Clean residual mean=-0.000049 rms=0.010244 Jy/beam ! Combined flux in latest and established models = 1.29021 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 1.29021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.304379Jy sigma=1.424190 ! Fit after self-cal, rms=0.301201Jy sigma=1.397765 ! Inverting map ! Added new window around map position (-0.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115959 Jy ! Component: 100 - total flux cleaned = 0.18732 Jy ! Total flux subtracted in 100 components = 0.18732 Jy ! Clean residual min=-0.036815 max=0.053001 Jy/beam ! Clean residual mean=-0.000034 rms=0.007064 Jy/beam ! Combined flux in latest and established models = 1.47753 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 1.47753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.220376Jy sigma=1.024654 ! Fit after self-cal, rms=0.213829Jy sigma=0.983146 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.064572 Jy ! Component: 100 - total flux cleaned = 0.107026 Jy ! Total flux subtracted in 100 components = 0.107026 Jy ! Clean residual min=-0.030361 max=0.034657 Jy/beam ! Clean residual mean=-0.000026 rms=0.005510 Jy/beam ! Combined flux in latest and established models = 1.58456 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 1.58456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174177Jy sigma=0.814990 ! Fit after self-cal, rms=0.171758Jy sigma=0.798660 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391544 Jy ! Component: 100 - total flux cleaned = 0.0665411 Jy ! Total flux subtracted in 100 components = 0.0665411 Jy ! Clean residual min=-0.026205 max=0.029842 Jy/beam ! Clean residual mean=-0.000020 rms=0.004857 Jy/beam ! Combined flux in latest and established models = 1.6511 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 1.6511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.152042Jy sigma=0.721529 ! Fit after self-cal, rms=0.151293Jy sigma=0.716145 ! Inverting map ! Added new window around map position (-2.2, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030216 Jy ! Component: 100 - total flux cleaned = 0.0501475 Jy ! Total flux subtracted in 100 components = 0.0501475 Jy ! Clean residual min=-0.024627 max=0.028805 Jy/beam ! Clean residual mean=-0.000017 rms=0.004433 Jy/beam ! Combined flux in latest and established models = 1.70125 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 1.70125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139670Jy sigma=0.668954 ! Fit after self-cal, rms=0.139140Jy sigma=0.665604 ! Inverting map ! Added new window around map position (-0.6, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269869 Jy ! Component: 100 - total flux cleaned = 0.0450415 Jy ! Total flux subtracted in 100 components = 0.0450415 Jy ! Clean residual min=-0.021390 max=0.022424 Jy/beam ! Clean residual mean=-0.000014 rms=0.004060 Jy/beam ! Combined flux in latest and established models = 1.74629 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 1.74629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129420Jy sigma=0.623772 ! Fit after self-cal, rms=0.128929Jy sigma=0.621184 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7392 mas, bmaj=1.725 mas, bpa=-4.764 degrees ! Estimated noise=1.68077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252469 Jy ! Component: 100 - total flux cleaned = 0.044144 Jy ! Component: 150 - total flux cleaned = 0.0590897 Jy ! Component: 200 - total flux cleaned = 0.0711167 Jy ! Total flux subtracted in 200 components = 0.0711167 Jy ! Clean residual min=-0.022296 max=0.022928 Jy/beam ! Clean residual mean=-0.000008 rms=0.004848 Jy/beam ! Combined flux in latest and established models = 1.8174 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 1.8174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119315Jy sigma=0.583994 ! Fit after self-cal, rms=0.118960Jy sigma=0.582006 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7392 x 1.725 at -4.764 degrees (North through East) ! Clean map min=-0.021919 max=0.90893 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.92 KP 1.05 ! LA 1.02 MK 0.99 NL 1.13 OV 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 1.06 KP 1.03 ! LA 1.02 MK 1.02 OV 0.90 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.92 KP 1.06 ! LA 1.02 MK 1.00 NL 1.11 OV 0.91 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.03 KP 1.04 ! LA 1.04 MK 1.05 OV 0.89 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.91 KP 1.05 ! LA 1.02 MK 1.00 NL 1.12 OV 0.91 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 1.03 KP 1.03 ! LA 1.03 MK 1.05 OV 0.91 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 1.06 ! LA 1.01 MK 0.97 NL 1.13 OV 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 1.03 KP 1.03 ! LA 1.01 MK 1.03 OV 0.91 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.93 KP 1.04 ! LA 1.01 MK 0.99 NL 1.11 OV 0.91 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 HN 1.05 KP 1.01 ! LA 1.01 MK 1.06 OV 0.91 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.95 KP 1.05 ! LA 1.01 MK 1.01 NL 1.10 OV 0.91 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 1.07 KP 1.02 ! LA 1.01 MK 1.06 OV 0.91 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.93 KP 1.04 ! LA 1.02 MK 0.99 NL 1.11 OV 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 1.06 KP 1.02 ! LA 1.02 MK 1.06 OV 0.90 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.93 KP 1.05 ! LA 1.01 MK 1.00 NL 1.13 OV 0.91 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 1.05 KP 1.02 ! LA 1.01 MK 1.06 OV 0.90 PT 0.91 ! SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.95 KP 1.05 ! LA 0.99 MK 0.99 NL 1.14 OV 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 1.07 KP 1.03 ! LA 1.01 MK 1.05 OV 0.92 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 0.95 KP 1.04 ! LA 1.02 MK 1.00 NL 1.13 OV 0.93 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.04 HN 1.05 KP 1.01 ! LA 1.02 MK 1.08 OV 0.92 PT 0.87 ! SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.97 KP 1.05 ! LA 1.03 MK 1.03 NL 1.12 OV 0.91 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.08 KP 1.03 ! LA 1.03 MK 1.07 OV 0.90 PT 0.92 ! SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.96 KP 1.05 ! LA 1.02 MK 1.01 NL 1.11 OV 0.91 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 HN 1.16 KP 1.02 ! LA 1.02 MK 1.06 OV 0.90 PT 0.89 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.118960Jy sigma=0.582006 ! Fit after self-cal, rms=0.067883Jy sigma=0.360316 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.742 mas, bmaj=1.728 mas, bpa=-4.818 degrees ! Estimated noise=1.68808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800198 Jy ! Component: 100 - total flux cleaned = 0.00759965 Jy ! Component: 150 - total flux cleaned = 0.00788136 Jy ! Component: 200 - total flux cleaned = 0.00886442 Jy ! Total flux subtracted in 200 components = 0.00886442 Jy ! Clean residual min=-0.006271 max=0.006986 Jy/beam ! Clean residual mean=-0.000003 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 1.82627 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 1.82627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063123Jy sigma=0.336230 ! Fit after self-cal, rms=0.062737Jy sigma=0.334871 ! Inverting map ! Added new window around map position (-1.8, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108342 Jy ! Component: 100 - total flux cleaned = 0.00132739 Jy ! Component: 150 - total flux cleaned = 0.00213137 Jy ! Component: 200 - total flux cleaned = 0.00266945 Jy ! Total flux subtracted in 200 components = 0.00266945 Jy ! Clean residual min=-0.005142 max=0.005297 Jy/beam ! Clean residual mean=-0.000003 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 1.82894 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 1.82894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061336Jy sigma=0.326548 ! Fit after self-cal, rms=0.061231Jy sigma=0.326184 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061231Jy sigma=0.326184 ! Fit after self-cal, rms=0.059756Jy sigma=0.320812 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7421 mas, bmaj=1.728 mas, bpa=-4.887 degrees ! Estimated noise=1.68297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309466 Jy ! Component: 100 - total flux cleaned = -0.00294324 Jy ! Component: 150 - total flux cleaned = -0.00217678 Jy ! Component: 200 - total flux cleaned = -0.00177056 Jy ! Total flux subtracted in 200 components = -0.00177056 Jy ! Clean residual min=-0.004461 max=0.004334 Jy/beam ! Clean residual mean=-0.000003 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 1.82717 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 1.82717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058881Jy sigma=0.315643 ! Fit after self-cal, rms=0.058778Jy sigma=0.315309 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000855415 Jy ! Component: 100 - total flux cleaned = -0.000600568 Jy ! Component: 150 - total flux cleaned = -0.000155655 Jy ! Component: 200 - total flux cleaned = 5.32614e-05 Jy ! Total flux subtracted in 200 components = 5.32614e-05 Jy ! Clean residual min=-0.004034 max=0.003809 Jy/beam ! Clean residual mean=-0.000003 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 1.82722 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 95 components and 1.82722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058376Jy sigma=0.312882 ! Fit after self-cal, rms=0.058340Jy sigma=0.312773 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058340Jy sigma=0.312773 ! Fit after self-cal, rms=0.058031Jy sigma=0.312125 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7421 mas, bmaj=1.728 mas, bpa=-4.899 degrees ! Estimated noise=1.68169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224649 Jy ! Component: 100 - total flux cleaned = -0.00246768 Jy ! Component: 150 - total flux cleaned = -0.00266361 Jy ! Component: 200 - total flux cleaned = -0.00275839 Jy ! Total flux subtracted in 200 components = -0.00275839 Jy ! Clean residual min=-0.003602 max=0.003639 Jy/beam ! Clean residual mean=-0.000003 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 1.82446 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 1.82446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057693Jy sigma=0.310042 ! Fit after self-cal, rms=0.057663Jy sigma=0.309943 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336635 Jy ! Component: 100 - total flux cleaned = 0.00433911 Jy ! Component: 150 - total flux cleaned = 0.00459397 Jy ! Component: 200 - total flux cleaned = 0.00467206 Jy ! Total flux subtracted in 200 components = 0.00467206 Jy ! Clean residual min=-0.003297 max=0.003497 Jy/beam ! Clean residual mean=-0.000002 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 1.82913 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 116 components and 1.82913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057326Jy sigma=0.308079 ! Fit after self-cal, rms=0.057301Jy sigma=0.307985 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057301Jy sigma=0.307985 ! Fit after self-cal, rms=0.057171Jy sigma=0.307717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.889 mas, bmaj=2.458 mas, bpa=-2.611 degrees ! Estimated noise=2.71114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.57441e-05 Jy ! Component: 100 - total flux cleaned = 0.000906507 Jy ! Component: 150 - total flux cleaned = 0.00136754 Jy ! Component: 200 - total flux cleaned = 0.00153254 Jy ! Total flux subtracted in 200 components = 0.00153254 Jy ! Clean residual min=-0.004142 max=0.004791 Jy/beam ! Clean residual mean=-0.000006 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 1.83067 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 133 components and 1.83067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057089Jy sigma=0.307641 ! Fit after self-cal, rms=0.057071Jy sigma=0.307538 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.8, 36.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420616 Jy ! Component: 100 - total flux cleaned = 0.00609626 Jy ! Component: 150 - total flux cleaned = 0.0070207 Jy ! Component: 200 - total flux cleaned = 0.00752127 Jy ! Total flux subtracted in 200 components = 0.00752127 Jy ! Clean residual min=-0.003938 max=0.003431 Jy/beam ! Clean residual mean=-0.000007 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 1.83819 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 169 components and 1.83819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056878Jy sigma=0.306737 ! Fit after self-cal, rms=0.056863Jy sigma=0.306671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7422 mas, bmaj=1.728 mas, bpa=-4.899 degrees ! Estimated noise=1.68131 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7422 x 1.728 at -4.899 degrees (North through East) ! Clean map min=-0.0029267 max=0.91199 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056863Jy sigma=0.306671 ! Fit after self-cal, rms=0.054092Jy sigma=0.284670 ! Inverting map and beam ! Estimated beam: bmin=0.7421 mas, bmaj=1.728 mas, bpa=-4.883 degrees ! Estimated noise=1.6811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945133 Jy ! Component: 100 - total flux cleaned = 0.00142949 Jy ! Component: 150 - total flux cleaned = 0.00169125 Jy ! Component: 200 - total flux cleaned = 0.0017738 Jy ! Total flux subtracted in 200 components = 0.0017738 Jy ! Clean residual min=-0.003008 max=0.003229 Jy/beam ! Clean residual mean=-0.000002 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 1.83996 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 185 components and 1.83996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053837Jy sigma=0.282892 ! Fit after self-cal, rms=0.053822Jy sigma=0.282859 ! Inverting map ! Added new window around map position (6, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215182 Jy ! Component: 100 - total flux cleaned = 0.00283116 Jy ! Component: 150 - total flux cleaned = 0.00385696 Jy ! Component: 200 - total flux cleaned = 0.00444821 Jy ! Total flux subtracted in 200 components = 0.00444821 Jy ! Clean residual min=-0.002725 max=0.002486 Jy/beam ! Clean residual mean=-0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 1.84441 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 197 components and 1.84441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053550Jy sigma=0.281201 ! Fit after self-cal, rms=0.053529Jy sigma=0.281168 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053529Jy sigma=0.281168 ! Fit after self-cal, rms=0.053480Jy sigma=0.281083 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6188 mas, bmaj=1.559 mas, bpa=-5.183 degrees ! Estimated noise=2.23768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.711005 Jy ! Component: 100 - total flux cleaned = 1.0308 Jy ! Component: 150 - total flux cleaned = 1.22801 Jy ! Component: 200 - total flux cleaned = 1.36101 Jy ! Total flux subtracted in 200 components = 1.36101 Jy ! Clean residual min=-0.033769 max=0.073277 Jy/beam ! Clean residual mean=-0.000038 rms=0.007168 Jy/beam ! Combined flux in latest and established models = 1.36101 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.36101 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7419 mas, bmaj=1.729 mas, bpa=-4.896 degrees ! Estimated noise=1.68024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129687 Jy ! Component: 100 - total flux cleaned = 0.21381 Jy ! Component: 150 - total flux cleaned = 0.272912 Jy ! Component: 200 - total flux cleaned = 0.315737 Jy ! Total flux subtracted in 200 components = 0.315737 Jy ! Clean residual min=-0.009815 max=0.024294 Jy/beam ! Clean residual mean=-0.000027 rms=0.003058 Jy/beam ! Combined flux in latest and established models = 1.67675 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 1.67675 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315313 Jy ! Component: 100 - total flux cleaned = 0.0548874 Jy ! Component: 150 - total flux cleaned = 0.0725069 Jy ! Component: 200 - total flux cleaned = 0.086317 Jy ! Total flux subtracted in 200 components = 0.086317 Jy ! Clean residual min=-0.006295 max=0.009299 Jy/beam ! Clean residual mean=-0.000011 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 1.76306 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 1.76306 Jy ! Inverting map ! Added new window around map position (-1.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112284 Jy ! Component: 100 - total flux cleaned = 0.0202429 Jy ! Component: 150 - total flux cleaned = 0.0276813 Jy ! Component: 200 - total flux cleaned = 0.033963 Jy ! Total flux subtracted in 200 components = 0.033963 Jy ! Clean residual min=-0.005186 max=0.004817 Jy/beam ! Clean residual mean=-0.000006 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 1.79703 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 1.79703 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.89 mas, bmaj=2.459 mas, bpa=-2.62 degrees ! Estimated noise=2.70883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831637 Jy ! Component: 100 - total flux cleaned = 0.0137753 Jy ! Component: 150 - total flux cleaned = 0.0182192 Jy ! Component: 200 - total flux cleaned = 0.0220325 Jy ! Total flux subtracted in 200 components = 0.0220325 Jy ! Clean residual min=-0.003972 max=0.004317 Jy/beam ! Clean residual mean=-0.000011 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 1.81906 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341257 Jy ! Component: 100 - total flux cleaned = 0.00650108 Jy ! Component: 150 - total flux cleaned = 0.00931138 Jy ! Component: 200 - total flux cleaned = 0.0115722 Jy ! Total flux subtracted in 200 components = 0.0115722 Jy ! Clean residual min=-0.003507 max=0.003754 Jy/beam ! Clean residual mean=-0.000009 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 1.83063 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 115 components and 1.83063 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7419 mas, bmaj=1.729 mas, bpa=-4.896 degrees ! Estimated noise=1.68024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106429 Jy ! Component: 100 - total flux cleaned = -0.000573001 Jy ! Component: 150 - total flux cleaned = 0.000604116 Jy ! Component: 200 - total flux cleaned = 0.00127171 Jy ! Total flux subtracted in 200 components = 0.00127171 Jy ! Clean residual min=-0.003446 max=0.003192 Jy/beam ! Clean residual mean=-0.000003 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 1.8319 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 1.8319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054371Jy sigma=0.286096 ! Fit after self-cal, rms=0.054195Jy sigma=0.284845 wmodel J0121+1149_X_d_map.mod ! Writing 132 model components to file: J0121+1149_X_d_map.mod wobs J0121+1149_X_d_uvs.fits ! Writing UV FITS file: J0121+1149_X_d_uvs.fits wwins J0121+1149_X_d_map.win ! wwins: Wrote 10 windows to J0121+1149_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229027 Jy ! Component: 100 - total flux cleaned = 0.000105127 Jy ! Component: 150 - total flux cleaned = 0.000468665 Jy ! Component: 200 - total flux cleaned = 0.000468638 Jy ! Component: 250 - total flux cleaned = 0.00056397 Jy ! Component: 300 - total flux cleaned = 0.000702822 Jy ! Component: 350 - total flux cleaned = 0.000793553 Jy ! Component: 400 - total flux cleaned = 0.000882006 Jy ! Component: 450 - total flux cleaned = 0.00105508 Jy ! Component: 500 - total flux cleaned = 0.00126667 Jy ! Component: 550 - total flux cleaned = 0.00159826 Jy ! Component: 600 - total flux cleaned = 0.00176045 Jy ! Component: 650 - total flux cleaned = 0.00207925 Jy ! Component: 700 - total flux cleaned = 0.00231372 Jy ! Component: 750 - total flux cleaned = 0.00262159 Jy ! Component: 800 - total flux cleaned = 0.00284732 Jy ! Component: 850 - total flux cleaned = 0.00299564 Jy ! Component: 900 - total flux cleaned = 0.00321553 Jy ! Component: 950 - total flux cleaned = 0.00350446 Jy ! Component: 1000 - total flux cleaned = 0.00368208 Jy ! Component: 1050 - total flux cleaned = 0.00396251 Jy ! Component: 1100 - total flux cleaned = 0.00417012 Jy ! Component: 1150 - total flux cleaned = 0.0043751 Jy ! Component: 1200 - total flux cleaned = 0.00457737 Jy ! Component: 1250 - total flux cleaned = 0.00474402 Jy ! Component: 1300 - total flux cleaned = 0.0049738 Jy ! Component: 1350 - total flux cleaned = 0.00526555 Jy ! Component: 1400 - total flux cleaned = 0.00542529 Jy ! Component: 1450 - total flux cleaned = 0.00564738 Jy ! Component: 1500 - total flux cleaned = 0.00592873 Jy ! Component: 1550 - total flux cleaned = 0.00620734 Jy ! Component: 1600 - total flux cleaned = 0.00651274 Jy ! Component: 1650 - total flux cleaned = 0.00663255 Jy ! Component: 1700 - total flux cleaned = 0.00690164 Jy ! Component: 1750 - total flux cleaned = 0.00696021 Jy ! Component: 1800 - total flux cleaned = 0.00707684 Jy ! Component: 1850 - total flux cleaned = 0.00733752 Jy ! Component: 1900 - total flux cleaned = 0.00745218 Jy ! Component: 1950 - total flux cleaned = 0.00762219 Jy ! Component: 2000 - total flux cleaned = 0.0077067 Jy ! Component: 2050 - total flux cleaned = 0.00787262 Jy ! Component: 2100 - total flux cleaned = 0.0079001 Jy ! Component: 2150 - total flux cleaned = 0.00811754 Jy ! Component: 2200 - total flux cleaned = 0.00817141 Jy ! Component: 2250 - total flux cleaned = 0.00835815 Jy ! Component: 2300 - total flux cleaned = 0.00835788 Jy ! Component: 2350 - total flux cleaned = 0.00851441 Jy ! Component: 2400 - total flux cleaned = 0.00864374 Jy ! Component: 2450 - total flux cleaned = 0.00872079 Jy ! Component: 2500 - total flux cleaned = 0.00882278 Jy ! Component: 2550 - total flux cleaned = 0.00892359 Jy ! Component: 2600 - total flux cleaned = 0.00894868 Jy ! Component: 2650 - total flux cleaned = 0.00904759 Jy ! Component: 2700 - total flux cleaned = 0.00907179 Jy ! Component: 2750 - total flux cleaned = 0.00909572 Jy ! Component: 2800 - total flux cleaned = 0.00916808 Jy ! Component: 2850 - total flux cleaned = 0.00921569 Jy ! Component: 2900 - total flux cleaned = 0.00928718 Jy ! Component: 2950 - total flux cleaned = 0.00935775 Jy ! Component: 3000 - total flux cleaned = 0.00933435 Jy ! Component: 3050 - total flux cleaned = 0.00938066 Jy ! Component: 3100 - total flux cleaned = 0.00935801 Jy ! Component: 3150 - total flux cleaned = 0.00944868 Jy ! Component: 3200 - total flux cleaned = 0.00944851 Jy ! Component: 3250 - total flux cleaned = 0.00942598 Jy ! Component: 3300 - total flux cleaned = 0.00947021 Jy ! Component: 3350 - total flux cleaned = 0.00942611 Jy ! Component: 3400 - total flux cleaned = 0.0095575 Jy ! Component: 3450 - total flux cleaned = 0.00957902 Jy ! Component: 3500 - total flux cleaned = 0.00955714 Jy ! Component: 3550 - total flux cleaned = 0.00955715 Jy ! Component: 3600 - total flux cleaned = 0.00959954 Jy ! Component: 3650 - total flux cleaned = 0.00959956 Jy ! Component: 3700 - total flux cleaned = 0.00962056 Jy ! Component: 3750 - total flux cleaned = 0.00962064 Jy ! Component: 3800 - total flux cleaned = 0.00962069 Jy ! Component: 3850 - total flux cleaned = 0.00972303 Jy ! Component: 3900 - total flux cleaned = 0.0096213 Jy ! Component: 3950 - total flux cleaned = 0.00976253 Jy ! Component: 4000 - total flux cleaned = 0.00964233 Jy ! Component: 4050 - total flux cleaned = 0.00962263 Jy ! Total flux subtracted in 4096 components = 0.00966187 Jy ! Clean residual min=-0.001040 max=0.001223 Jy/beam ! Clean residual mean=-0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 1.84156 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 427 components and 1.84156 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0121+1149_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7419 x 1.729 at -4.896 degrees (North through East) ! Clean map min=-0.0023356 max=0.9089 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0121+1149_X_d_map.fits wmodel /image_prod/ug002_uva//J0121+1149_X_d_map.mod ! Writing 427 model components to file: /image_prod/ug002_uva//J0121+1149_X_d_map.mod wobs /image_prod/ug002_uva//J0121+1149_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0121+1149_X_d_uvs.fits wwins /image_prod/ug002_uva//J0121+1149_X_d_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0121+1149_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.908905 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000331379 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.109378 0.109378 0.218755 0.43751 0.87502 1.75004 3.50008 7.00016 14.0003 28.0006 56.0013 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.908 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2742.79 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0121+1149_X_d_dfm.log closed on Wed Mar 4 19:01:14 2020