! Started logfile: /image_prod/ug002_uva//J0121+1149_X_c_dfm.log on Wed Mar 4 19:01:02 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0121+1149_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0121+1149_X_c_uva.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.861111 visibilities/baseline/integration-bin. ! Found source: J0121+1149 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 6696 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0121+1149_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.592126Jy sigma=7.905625 ! Fit after self-cal, rms=0.561911Jy sigma=2.895527 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6324 mas, bmaj=1.632 mas, bpa=-2.682 degrees ! Estimated noise=2.10199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.738701 Jy ! Component: 100 - total flux cleaned = 1.05041 Jy ! Total flux subtracted in 100 components = 1.05041 Jy ! Clean residual min=-0.072118 max=0.148599 Jy/beam ! Clean residual mean=-0.000042 rms=0.014723 Jy/beam ! Combined flux in latest and established models = 1.05041 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.05041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.479115Jy sigma=2.095445 ! Fit after self-cal, rms=0.475876Jy sigma=2.066724 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180914 Jy ! Component: 100 - total flux cleaned = 0.298348 Jy ! Total flux subtracted in 100 components = 0.298348 Jy ! Clean residual min=-0.047052 max=0.122510 Jy/beam ! Clean residual mean=-0.000025 rms=0.010057 Jy/beam ! Combined flux in latest and established models = 1.34876 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 1.34876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.316445Jy sigma=1.409737 ! Fit after self-cal, rms=0.313875Jy sigma=1.386026 ! Inverting map ! Added new window around map position (-0.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118259 Jy ! Component: 100 - total flux cleaned = 0.193478 Jy ! Total flux subtracted in 100 components = 0.193478 Jy ! Clean residual min=-0.033981 max=0.057960 Jy/beam ! Clean residual mean=-0.000013 rms=0.006664 Jy/beam ! Combined flux in latest and established models = 1.54224 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 1.54224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.221239Jy sigma=0.974281 ! Fit after self-cal, rms=0.215400Jy sigma=0.933483 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665049 Jy ! Component: 100 - total flux cleaned = 0.111373 Jy ! Total flux subtracted in 100 components = 0.111373 Jy ! Clean residual min=-0.025718 max=0.032803 Jy/beam ! Clean residual mean=-0.000006 rms=0.004756 Jy/beam ! Combined flux in latest and established models = 1.65361 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 1.65361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167193Jy sigma=0.735105 ! Fit after self-cal, rms=0.165177Jy sigma=0.719088 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405494 Jy ! Component: 100 - total flux cleaned = 0.0694406 Jy ! Total flux subtracted in 100 components = 0.0694406 Jy ! Clean residual min=-0.019864 max=0.026650 Jy/beam ! Clean residual mean=-0.000002 rms=0.003865 Jy/beam ! Combined flux in latest and established models = 1.72305 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 1.72305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139299Jy sigma=0.621781 ! Fit after self-cal, rms=0.138659Jy sigma=0.615888 ! Inverting map ! Added new window around map position (0, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282735 Jy ! Component: 100 - total flux cleaned = 0.0490874 Jy ! Total flux subtracted in 100 components = 0.0490874 Jy ! Clean residual min=-0.017328 max=0.021440 Jy/beam ! Clean residual mean=0.000001 rms=0.003377 Jy/beam ! Combined flux in latest and established models = 1.77214 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 1.77214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123522Jy sigma=0.560518 ! Fit after self-cal, rms=0.123292Jy sigma=0.558700 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7439 mas, bmaj=1.795 mas, bpa=-2.955 degrees ! Estimated noise=1.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341557 Jy ! Component: 100 - total flux cleaned = 0.0589127 Jy ! Component: 150 - total flux cleaned = 0.0778341 Jy ! Component: 200 - total flux cleaned = 0.0926158 Jy ! Total flux subtracted in 200 components = 0.0926158 Jy ! Clean residual min=-0.020561 max=0.016023 Jy/beam ! Clean residual mean=0.000006 rms=0.003791 Jy/beam ! Combined flux in latest and established models = 1.86476 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 1.86476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103764Jy sigma=0.493804 ! Fit after self-cal, rms=0.103386Jy sigma=0.491864 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7439 x 1.795 at -2.955 degrees (North through East) ! Clean map min=-0.01893 max=0.97065 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.00 KP 1.04 ! LA 1.03 MK 0.99 OV 0.92 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.01 KP 1.04 ! LA 1.03 MK 0.96 OV 0.93 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.99 KP 1.03 ! LA 1.04 MK 0.99 OV 0.93 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.98 KP 1.04 ! LA 1.03 MK 1.02 OV 0.93 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.99 KP 1.04 ! LA 1.04 MK 1.00 OV 0.95 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.00 KP 1.03 ! LA 1.02 MK 1.02 OV 0.93 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.99 KP 1.03 ! LA 1.05 MK 1.04 OV 0.92 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.99 KP 1.04 ! LA 1.04 MK 1.03 OV 0.93 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.00 KP 1.04 ! LA 1.04 MK 1.03 OV 0.92 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.01 KP 1.04 ! LA 1.03 MK 1.04 OV 0.92 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 1.05 ! LA 1.02 MK 1.07 OV 0.93 PT 0.93 ! SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.03 KP 1.06 ! LA 1.01 MK 1.05 OV 0.93 PT 0.90 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.103386Jy sigma=0.491864 ! Fit after self-cal, rms=0.060536Jy sigma=0.326619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7485 mas, bmaj=1.802 mas, bpa=-2.927 degrees ! Estimated noise=1.65086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.006249 Jy ! Component: 100 - total flux cleaned = 0.0060846 Jy ! Component: 150 - total flux cleaned = 0.00575306 Jy ! Component: 200 - total flux cleaned = 0.0056033 Jy ! Total flux subtracted in 200 components = 0.0056033 Jy ! Clean residual min=-0.005663 max=0.004890 Jy/beam ! Clean residual mean=-0.000001 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 1.87036 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 1.87036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059470Jy sigma=0.319815 ! Fit after self-cal, rms=0.059363Jy sigma=0.319407 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059363Jy sigma=0.319407 ! Fit after self-cal, rms=0.057072Jy sigma=0.307047 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7467 mas, bmaj=1.8 mas, bpa=-3.084 degrees ! Estimated noise=1.64677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247788 Jy ! Component: 100 - total flux cleaned = 0.00177155 Jy ! Component: 150 - total flux cleaned = 0.00134497 Jy ! Component: 200 - total flux cleaned = 0.00106086 Jy ! Total flux subtracted in 200 components = 0.00106086 Jy ! Clean residual min=-0.002933 max=0.003473 Jy/beam ! Clean residual mean=-0.000003 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 1.87142 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 1.87142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056667Jy sigma=0.304299 ! Fit after self-cal, rms=0.056654Jy sigma=0.304195 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337466 Jy ! Component: 100 - total flux cleaned = 0.00491625 Jy ! Component: 150 - total flux cleaned = 0.00542494 Jy ! Component: 200 - total flux cleaned = 0.00573664 Jy ! Total flux subtracted in 200 components = 0.00573664 Jy ! Clean residual min=-0.002829 max=0.003072 Jy/beam ! Clean residual mean=-0.000002 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 1.87716 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 1.87716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056347Jy sigma=0.302531 ! Fit after self-cal, rms=0.056338Jy sigma=0.302476 ! Inverting map ! Added new window around map position (-12.6, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269047 Jy ! Component: 100 - total flux cleaned = 0.00322111 Jy ! Component: 150 - total flux cleaned = 0.0035637 Jy ! Component: 200 - total flux cleaned = 0.00382216 Jy ! Total flux subtracted in 200 components = 0.00382216 Jy ! Clean residual min=-0.002739 max=0.002756 Jy/beam ! Clean residual mean=-0.000003 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.88098 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 109 components and 1.88098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056127Jy sigma=0.301298 ! Fit after self-cal, rms=0.056116Jy sigma=0.301274 ! Inverting map ! Added new window around map position (-6.2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000583006 Jy ! Component: 100 - total flux cleaned = 0.000982332 Jy ! Component: 150 - total flux cleaned = 0.00128795 Jy ! Component: 200 - total flux cleaned = 0.00163172 Jy ! Total flux subtracted in 200 components = 0.00163172 Jy ! Clean residual min=-0.002689 max=0.002471 Jy/beam ! Clean residual mean=-0.000002 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 1.88261 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 121 components and 1.88261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055963Jy sigma=0.300292 ! Fit after self-cal, rms=0.055955Jy sigma=0.300269 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055955Jy sigma=0.300269 ! Fit after self-cal, rms=0.055833Jy sigma=0.299831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7464 mas, bmaj=1.8 mas, bpa=-3.129 degrees ! Estimated noise=1.64552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705421 Jy ! Component: 100 - total flux cleaned = 0.000883523 Jy ! Component: 150 - total flux cleaned = 0.00115086 Jy ! Component: 200 - total flux cleaned = 0.00140009 Jy ! Total flux subtracted in 200 components = 0.00140009 Jy ! Clean residual min=-0.002257 max=0.002283 Jy/beam ! Clean residual mean=-0.000002 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 1.88401 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 127 components and 1.88401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055733Jy sigma=0.299197 ! Fit after self-cal, rms=0.055732Jy sigma=0.299189 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290328 Jy ! Component: 100 - total flux cleaned = 0.000381266 Jy ! Component: 150 - total flux cleaned = 0.000558141 Jy ! Component: 200 - total flux cleaned = 0.000726897 Jy ! Total flux subtracted in 200 components = 0.000726897 Jy ! Clean residual min=-0.002175 max=0.002184 Jy/beam ! Clean residual mean=-0.000002 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 1.88474 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 128 components and 1.88474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055675Jy sigma=0.298834 ! Fit after self-cal, rms=0.055674Jy sigma=0.298830 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055674Jy sigma=0.298830 ! Fit after self-cal, rms=0.055659Jy sigma=0.298772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.997 mas, bmaj=2.58 mas, bpa=4.843 degrees ! Estimated noise=2.72181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.40604e-05 Jy ! Component: 100 - total flux cleaned = 0.000392349 Jy ! Component: 150 - total flux cleaned = 0.000604877 Jy ! Component: 200 - total flux cleaned = 0.000891965 Jy ! Total flux subtracted in 200 components = 0.000891965 Jy ! Clean residual min=-0.002906 max=0.003003 Jy/beam ! Clean residual mean=-0.000007 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 1.88563 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 142 components and 1.88563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055635Jy sigma=0.298735 ! Fit after self-cal, rms=0.055638Jy sigma=0.298720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260622 Jy ! Component: 100 - total flux cleaned = 0.000456594 Jy ! Component: 150 - total flux cleaned = 0.000638668 Jy ! Component: 200 - total flux cleaned = 0.000735393 Jy ! Total flux subtracted in 200 components = 0.000735393 Jy ! Clean residual min=-0.002848 max=0.002891 Jy/beam ! Clean residual mean=-0.000007 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 1.88637 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 1.88637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055631Jy sigma=0.298736 ! Fit after self-cal, rms=0.055632Jy sigma=0.298731 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7463 mas, bmaj=1.8 mas, bpa=-3.145 degrees ! Estimated noise=1.64522 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7463 x 1.8 at -3.145 degrees (North through East) ! Clean map min=-0.0020626 max=0.96405 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055632Jy sigma=0.298731 ! Fit after self-cal, rms=0.052826Jy sigma=0.278148 ! Inverting map and beam ! Estimated beam: bmin=0.7463 mas, bmaj=1.799 mas, bpa=-3.146 degrees ! Estimated noise=1.64548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428984 Jy ! Component: 100 - total flux cleaned = 0.00042554 Jy ! Component: 150 - total flux cleaned = 0.000379717 Jy ! Component: 200 - total flux cleaned = 0.000418067 Jy ! Total flux subtracted in 200 components = 0.000418067 Jy ! Clean residual min=-0.001956 max=0.002109 Jy/beam ! Clean residual mean=-0.000002 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 1.88678 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 159 components and 1.88678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052766Jy sigma=0.277738 ! Fit after self-cal, rms=0.052762Jy sigma=0.277731 ! Inverting map ! Added new window around map position (-7, 22.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134384 Jy ! Component: 100 - total flux cleaned = 0.00167918 Jy ! Component: 150 - total flux cleaned = 0.00202056 Jy ! Component: 200 - total flux cleaned = 0.00216238 Jy ! Total flux subtracted in 200 components = 0.00216238 Jy ! Clean residual min=-0.002069 max=0.001939 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 1.88895 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 176 components and 1.88895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052689Jy sigma=0.277252 ! Fit after self-cal, rms=0.052690Jy sigma=0.277241 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052690Jy sigma=0.277241 ! Fit after self-cal, rms=0.052673Jy sigma=0.277197 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6335 mas, bmaj=1.633 mas, bpa=-2.859 degrees ! Estimated noise=2.10218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.737902 Jy ! Component: 100 - total flux cleaned = 1.06584 Jy ! Component: 150 - total flux cleaned = 1.27103 Jy ! Component: 200 - total flux cleaned = 1.41131 Jy ! Total flux subtracted in 200 components = 1.41131 Jy ! Clean residual min=-0.032095 max=0.077899 Jy/beam ! Clean residual mean=-0.000026 rms=0.007440 Jy/beam ! Combined flux in latest and established models = 1.41131 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.41131 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7462 mas, bmaj=1.799 mas, bpa=-3.158 degrees ! Estimated noise=1.64507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142187 Jy ! Component: 100 - total flux cleaned = 0.232818 Jy ! Component: 150 - total flux cleaned = 0.29435 Jy ! Component: 200 - total flux cleaned = 0.337926 Jy ! Total flux subtracted in 200 components = 0.337926 Jy ! Clean residual min=-0.010660 max=0.024436 Jy/beam ! Clean residual mean=-0.000027 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 1.74923 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 38 components and 1.74923 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316832 Jy ! Component: 100 - total flux cleaned = 0.0550472 Jy ! Component: 150 - total flux cleaned = 0.0725182 Jy ! Component: 200 - total flux cleaned = 0.0856522 Jy ! Total flux subtracted in 200 components = 0.0856522 Jy ! Clean residual min=-0.004767 max=0.007588 Jy/beam ! Clean residual mean=-0.000010 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 1.83489 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 47 components and 1.83489 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00999359 Jy ! Component: 100 - total flux cleaned = 0.0176308 Jy ! Component: 150 - total flux cleaned = 0.0235588 Jy ! Component: 200 - total flux cleaned = 0.0281547 Jy ! Total flux subtracted in 200 components = 0.0281547 Jy ! Clean residual min=-0.003313 max=0.003537 Jy/beam ! Clean residual mean=-0.000005 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 1.86304 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 1.86304 Jy ! Inverting map ! Added new window around map position (-2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355678 Jy ! Component: 100 - total flux cleaned = 0.00681426 Jy ! Component: 150 - total flux cleaned = 0.00909303 Jy ! Component: 200 - total flux cleaned = 0.0111827 Jy ! Total flux subtracted in 200 components = 0.0111827 Jy ! Clean residual min=-0.002704 max=0.002472 Jy/beam ! Clean residual mean=-0.000004 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 1.87422 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 75 components and 1.87422 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.997 mas, bmaj=2.58 mas, bpa=4.839 degrees ! Estimated noise=2.72177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041358 Jy ! Component: 100 - total flux cleaned = 0.00637174 Jy ! Component: 150 - total flux cleaned = 0.00793935 Jy ! Component: 200 - total flux cleaned = 0.00888307 Jy ! Total flux subtracted in 200 components = 0.00888307 Jy ! Clean residual min=-0.003288 max=0.003215 Jy/beam ! Clean residual mean=-0.000009 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 1.88311 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558867 Jy ! Component: 100 - total flux cleaned = 0.00106347 Jy ! Component: 150 - total flux cleaned = 0.00135333 Jy ! Component: 200 - total flux cleaned = 0.00167701 Jy ! Total flux subtracted in 200 components = 0.00167701 Jy ! Clean residual min=-0.003174 max=0.002988 Jy/beam ! Clean residual mean=-0.000008 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 1.88478 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 129 components and 1.88478 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7462 mas, bmaj=1.799 mas, bpa=-3.158 degrees ! Estimated noise=1.64507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158112 Jy ! Component: 100 - total flux cleaned = -0.00149302 Jy ! Component: 150 - total flux cleaned = -0.00114309 Jy ! Component: 200 - total flux cleaned = -0.000730404 Jy ! Total flux subtracted in 200 components = -0.000730404 Jy ! Clean residual min=-0.002213 max=0.002198 Jy/beam ! Clean residual mean=-0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 1.88405 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 148 components and 1.88405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053055Jy sigma=0.280012 ! Fit after self-cal, rms=0.053036Jy sigma=0.279768 wmodel J0121+1149_X_c_map.mod ! Writing 148 model components to file: J0121+1149_X_c_map.mod wobs J0121+1149_X_c_uvs.fits ! Writing UV FITS file: J0121+1149_X_c_uvs.fits wwins J0121+1149_X_c_map.win ! wwins: Wrote 10 windows to J0121+1149_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120414 Jy ! Component: 100 - total flux cleaned = -0.000437874 Jy ! Component: 150 - total flux cleaned = -0.000666293 Jy ! Component: 200 - total flux cleaned = -0.000959108 Jy ! Component: 250 - total flux cleaned = -0.000958192 Jy ! Component: 300 - total flux cleaned = -0.00113174 Jy ! Component: 350 - total flux cleaned = -0.00119965 Jy ! Component: 400 - total flux cleaned = -0.00139882 Jy ! Component: 450 - total flux cleaned = -0.00149647 Jy ! Component: 500 - total flux cleaned = -0.00159253 Jy ! Component: 550 - total flux cleaned = -0.00175001 Jy ! Component: 600 - total flux cleaned = -0.00175024 Jy ! Component: 650 - total flux cleaned = -0.00190382 Jy ! Component: 700 - total flux cleaned = -0.00199495 Jy ! Component: 750 - total flux cleaned = -0.00214422 Jy ! Component: 800 - total flux cleaned = -0.00229114 Jy ! Component: 850 - total flux cleaned = -0.00240657 Jy ! Component: 900 - total flux cleaned = -0.00237808 Jy ! Component: 950 - total flux cleaned = -0.00254797 Jy ! Component: 1000 - total flux cleaned = -0.0026598 Jy ! Component: 1050 - total flux cleaned = -0.00274223 Jy ! Component: 1100 - total flux cleaned = -0.00274215 Jy ! Component: 1150 - total flux cleaned = -0.00282335 Jy ! Component: 1200 - total flux cleaned = -0.00287644 Jy ! Component: 1250 - total flux cleaned = -0.00290307 Jy ! Component: 1300 - total flux cleaned = -0.00298162 Jy ! Component: 1350 - total flux cleaned = -0.00298193 Jy ! Component: 1400 - total flux cleaned = -0.00303359 Jy ! Component: 1450 - total flux cleaned = -0.00321184 Jy ! Component: 1500 - total flux cleaned = -0.00323698 Jy ! Component: 1550 - total flux cleaned = -0.00323691 Jy ! Component: 1600 - total flux cleaned = -0.00333588 Jy ! Component: 1650 - total flux cleaned = -0.00333556 Jy ! Component: 1700 - total flux cleaned = -0.00333538 Jy ! Component: 1750 - total flux cleaned = -0.00338382 Jy ! Component: 1800 - total flux cleaned = -0.00345546 Jy ! Component: 1850 - total flux cleaned = -0.00347945 Jy ! Component: 1900 - total flux cleaned = -0.00357323 Jy ! Component: 1950 - total flux cleaned = -0.00361959 Jy ! Component: 2000 - total flux cleaned = -0.0036192 Jy ! Component: 2050 - total flux cleaned = -0.0036876 Jy ! Component: 2100 - total flux cleaned = -0.0036197 Jy ! Component: 2150 - total flux cleaned = -0.00357495 Jy ! Component: 2200 - total flux cleaned = -0.00364166 Jy ! Component: 2250 - total flux cleaned = -0.00361961 Jy ! Component: 2300 - total flux cleaned = -0.00366329 Jy ! Component: 2350 - total flux cleaned = -0.00361976 Jy ! Component: 2400 - total flux cleaned = -0.0036414 Jy ! Component: 2450 - total flux cleaned = -0.00366263 Jy ! Component: 2500 - total flux cleaned = -0.00370515 Jy ! Component: 2550 - total flux cleaned = -0.00366287 Jy ! Component: 2600 - total flux cleaned = -0.00368392 Jy ! Component: 2650 - total flux cleaned = -0.00368371 Jy ! Component: 2700 - total flux cleaned = -0.00372486 Jy ! Component: 2750 - total flux cleaned = -0.00372454 Jy ! Component: 2800 - total flux cleaned = -0.00376498 Jy ! Component: 2850 - total flux cleaned = -0.00384568 Jy ! Component: 2900 - total flux cleaned = -0.00384575 Jy ! Component: 2950 - total flux cleaned = -0.00396479 Jy ! Component: 3000 - total flux cleaned = -0.0040437 Jy ! Component: 3050 - total flux cleaned = -0.00400446 Jy ! Component: 3100 - total flux cleaned = -0.00404324 Jy ! Component: 3150 - total flux cleaned = -0.00410105 Jy ! Component: 3200 - total flux cleaned = -0.00415861 Jy ! Component: 3250 - total flux cleaned = -0.00425389 Jy ! Component: 3300 - total flux cleaned = -0.00419725 Jy ! Component: 3350 - total flux cleaned = -0.00419722 Jy ! Component: 3400 - total flux cleaned = -0.00429053 Jy ! Component: 3450 - total flux cleaned = -0.00436495 Jy ! Component: 3500 - total flux cleaned = -0.00442033 Jy ! Component: 3550 - total flux cleaned = -0.00453019 Jy ! Component: 3600 - total flux cleaned = -0.00456662 Jy ! Component: 3650 - total flux cleaned = -0.00460287 Jy ! Component: 3700 - total flux cleaned = -0.00471083 Jy ! Component: 3750 - total flux cleaned = -0.00472893 Jy ! Component: 3800 - total flux cleaned = -0.00479979 Jy ! Component: 3850 - total flux cleaned = -0.00485276 Jy ! Component: 3900 - total flux cleaned = -0.00494034 Jy ! Component: 3950 - total flux cleaned = -0.00502749 Jy ! Component: 4000 - total flux cleaned = -0.00506199 Jy ! Component: 4050 - total flux cleaned = -0.00511359 Jy ! Total flux subtracted in 4096 components = -0.00518188 Jy ! Clean residual min=-0.000978 max=0.001007 Jy/beam ! Clean residual mean=-0.000002 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 1.87887 Jy keep ! Adding 349 model components to the UV plane model. ! The established model now contains 494 components and 1.87887 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0121+1149_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7462 x 1.799 at -3.158 degrees (North through East) ! Clean map min=-0.0017485 max=0.96209 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0121+1149_X_c_map.fits wmodel /image_prod/ug002_uva//J0121+1149_X_c_map.mod ! Writing 494 model components to file: /image_prod/ug002_uva//J0121+1149_X_c_map.mod wobs /image_prod/ug002_uva//J0121+1149_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0121+1149_X_c_uvs.fits wwins /image_prod/ug002_uva//J0121+1149_X_c_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0121+1149_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.962095 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292803 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0913016 0.0913016 0.182603 0.365206 0.730413 1.46083 2.92165 5.8433 11.6866 23.3732 46.7464 93.4928 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.962 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3285.81 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0121+1149_X_c_dfm.log closed on Wed Mar 4 19:01:08 2020