! Started logfile: /image_prod/ug002_uva//J0119-1654_S_dfm.log on Wed Mar 4 18:59:29 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0119-1654_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0119-1654_S_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991667 visibilities/baseline/integration-bin. ! Found source: J0119-1654 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5355 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0119-1654_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.011915Jy sigma=7.110273 ! Fit after self-cal, rms=0.909236Jy sigma=6.348996 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=6.84 mas, bpa=-4.162 degrees ! Estimated noise=2.03574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722355 Jy ! Component: 100 - total flux cleaned = 0.0892189 Jy ! Total flux subtracted in 100 components = 0.0892189 Jy ! Clean residual min=-0.005524 max=0.008755 Jy/beam ! Clean residual mean=0.000003 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.089219 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.089219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071952Jy sigma=0.455530 ! Fit after self-cal, rms=0.071632Jy sigma=0.454394 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=8.051 mas, bpa=-3.482 degrees ! Estimated noise=1.41738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917877 Jy ! Component: 100 - total flux cleaned = 0.0130255 Jy ! Component: 150 - total flux cleaned = 0.0148391 Jy ! Component: 200 - total flux cleaned = 0.0151077 Jy ! Total flux subtracted in 200 components = 0.0151077 Jy ! Clean residual min=-0.004408 max=0.005025 Jy/beam ! Clean residual mean=-0.000001 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.104327 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.104327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070924Jy sigma=0.444260 ! Fit after self-cal, rms=0.070928Jy sigma=0.444095 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.274 x 8.051 at -3.482 degrees (North through East) ! Clean map min=-0.0041581 max=0.094301 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.95 HN 1.11 KP 0.94 ! LA 1.00 MK 1.03 NL 0.95 OV 1.03 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 0.94 HN 1.05 KP 0.95 ! LA 0.99 MK 1.04 NL 0.95 OV 0.92 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.95 HN 1.11 KP 1.00 ! LA 0.99 MK 0.97 NL 1.04 OV 0.93 ! PT 0.99 SC 0.91 ! ! ! Fit before self-cal, rms=0.070928Jy sigma=0.444095 ! Fit after self-cal, rms=0.074152Jy sigma=0.438641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.024 mas, bpa=-2.61 degrees ! Estimated noise=1.40573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340667 Jy ! Component: 100 - total flux cleaned = 0.000207522 Jy ! Component: 150 - total flux cleaned = 9.69149e-05 Jy ! Component: 200 - total flux cleaned = 3.21412e-05 Jy ! Total flux subtracted in 200 components = 3.21412e-05 Jy ! Clean residual min=-0.003670 max=0.003708 Jy/beam ! Clean residual mean=0.000007 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.104359 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.104359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074087Jy sigma=0.438328 ! Fit after self-cal, rms=0.074229Jy sigma=0.438179 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074229Jy sigma=0.438179 ! Fit after self-cal, rms=0.085447Jy sigma=0.433675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=7.997 mas, bpa=-2.815 degrees ! Estimated noise=1.40521 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557651 Jy ! Component: 100 - total flux cleaned = 0.000400472 Jy ! Component: 150 - total flux cleaned = 0.000372407 Jy ! Component: 200 - total flux cleaned = 0.000346564 Jy ! Total flux subtracted in 200 components = 0.000346564 Jy ! Clean residual min=-0.002618 max=0.002390 Jy/beam ! Clean residual mean=-0.000001 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.104705 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.104705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085411Jy sigma=0.433455 ! Fit after self-cal, rms=0.085567Jy sigma=0.433364 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111073 Jy ! Component: 100 - total flux cleaned = -1.15861e-05 Jy ! Component: 150 - total flux cleaned = -5.51652e-05 Jy ! Component: 200 - total flux cleaned = -9.55061e-05 Jy ! Total flux subtracted in 200 components = -9.55061e-05 Jy ! Clean residual min=-0.002652 max=0.002329 Jy/beam ! Clean residual mean=-0.000001 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.10461 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.10461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085547Jy sigma=0.433252 ! Fit after self-cal, rms=0.085551Jy sigma=0.433238 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085551Jy sigma=0.433238 ! Fit after self-cal, rms=0.086165Jy sigma=0.433197 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.98 mas, bpa=-2.927 degrees ! Estimated noise=1.40207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348207 Jy ! Component: 100 - total flux cleaned = 0.000347866 Jy ! Component: 150 - total flux cleaned = 0.000347522 Jy ! Component: 200 - total flux cleaned = 0.000347992 Jy ! Total flux subtracted in 200 components = 0.000347992 Jy ! Clean residual min=-0.002591 max=0.002244 Jy/beam ! Clean residual mean=-0.000001 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.104958 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.104958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086145Jy sigma=0.433096 ! Fit after self-cal, rms=0.086153Jy sigma=0.433089 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.49136e-05 Jy ! Component: 100 - total flux cleaned = -2.0306e-05 Jy ! Component: 150 - total flux cleaned = -5.35323e-05 Jy ! Component: 200 - total flux cleaned = -6.89546e-05 Jy ! Total flux subtracted in 200 components = -6.89546e-05 Jy ! Clean residual min=-0.002592 max=0.002235 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.104889 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.104889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086142Jy sigma=0.433044 ! Fit after self-cal, rms=0.086144Jy sigma=0.433039 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086144Jy sigma=0.433039 ! Fit after self-cal, rms=0.086279Jy sigma=0.433015 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.835 mas, bmaj=15.96 mas, bpa=-0.2006 degrees ! Estimated noise=1.73485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074161 Jy ! Component: 100 - total flux cleaned = 0.000780701 Jy ! Component: 150 - total flux cleaned = 0.000797299 Jy ! Component: 200 - total flux cleaned = 0.000782887 Jy ! Total flux subtracted in 200 components = 0.000782887 Jy ! Clean residual min=-0.002023 max=0.001783 Jy/beam ! Clean residual mean=-0.000003 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.105672 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.105672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086277Jy sigma=0.433030 ! Fit after self-cal, rms=0.086270Jy sigma=0.433017 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.74089e-05 Jy ! Component: 100 - total flux cleaned = 4.51254e-05 Jy ! Component: 150 - total flux cleaned = 1.21556e-05 Jy ! Component: 200 - total flux cleaned = -1.49577e-05 Jy ! Total flux subtracted in 200 components = -1.49577e-05 Jy ! Clean residual min=-0.002027 max=0.001751 Jy/beam ! Clean residual mean=-0.000003 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.105657 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 50 components and 0.105657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086271Jy sigma=0.433087 ! Fit after self-cal, rms=0.086264Jy sigma=0.433078 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=7.961 mas, bpa=-3.02 degrees ! Estimated noise=1.39961 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 7.961 at -3.02 degrees (North through East) ! Clean map min=-0.0023933 max=0.09382 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=6.785 mas, bpa=-3.713 degrees ! Estimated noise=2.00028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0709419 Jy ! Component: 100 - total flux cleaned = 0.08869 Jy ! Component: 150 - total flux cleaned = 0.0966336 Jy ! Component: 200 - total flux cleaned = 0.100754 Jy ! Total flux subtracted in 200 components = 0.100754 Jy ! Clean residual min=-0.003673 max=0.003581 Jy/beam ! Clean residual mean=-0.000002 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.100754 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.100754 Jy ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=7.961 mas, bpa=-3.02 degrees ! Estimated noise=1.39961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347608 Jy ! Component: 100 - total flux cleaned = 0.00491343 Jy ! Component: 150 - total flux cleaned = 0.00500029 Jy ! Component: 200 - total flux cleaned = 0.00511046 Jy ! Total flux subtracted in 200 components = 0.00511046 Jy ! Clean residual min=-0.002542 max=0.002243 Jy/beam ! Clean residual mean=-0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.105865 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.105865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.835 mas, bmaj=15.96 mas, bpa=-0.2006 degrees ! Estimated noise=1.73485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296399 Jy ! Component: 100 - total flux cleaned = 0.000380753 Jy ! Component: 150 - total flux cleaned = 0.000457195 Jy ! Component: 200 - total flux cleaned = 0.000526677 Jy ! Total flux subtracted in 200 components = 0.000526677 Jy ! Clean residual min=-0.002007 max=0.001858 Jy/beam ! Clean residual mean=-0.000001 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.106391 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.88837e-05 Jy ! Component: 100 - total flux cleaned = 6.33846e-05 Jy ! Component: 150 - total flux cleaned = 7.77473e-05 Jy ! Component: 200 - total flux cleaned = 9.16567e-05 Jy ! Total flux subtracted in 200 components = 9.16567e-05 Jy ! Clean residual min=-0.002031 max=0.001857 Jy/beam ! Clean residual mean=-0.000001 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.106483 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.106483 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=7.961 mas, bpa=-3.02 degrees ! Estimated noise=1.39961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367058 Jy ! Component: 100 - total flux cleaned = -0.000395265 Jy ! Component: 150 - total flux cleaned = -0.000420198 Jy ! Component: 200 - total flux cleaned = -0.000420006 Jy ! Total flux subtracted in 200 components = -0.000420006 Jy ! Clean residual min=-0.002578 max=0.002179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.106063 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.106063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086189Jy sigma=0.432552 ! Fit after self-cal, rms=0.086203Jy sigma=0.432511 wmodel J0119-1654_S_map.mod ! Writing 72 model components to file: J0119-1654_S_map.mod wobs J0119-1654_S_uvs.fits ! Writing UV FITS file: J0119-1654_S_uvs.fits wwins J0119-1654_S_map.win ! wwins: Wrote 2 windows to J0119-1654_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381625 Jy ! Component: 100 - total flux cleaned = -0.000380469 Jy ! Component: 150 - total flux cleaned = -0.000453203 Jy ! Component: 200 - total flux cleaned = -0.000556527 Jy ! Component: 250 - total flux cleaned = -0.000488813 Jy ! Component: 300 - total flux cleaned = -0.000296562 Jy ! Component: 350 - total flux cleaned = -0.000265582 Jy ! Component: 400 - total flux cleaned = -0.000204792 Jy ! Component: 450 - total flux cleaned = -0.000175354 Jy ! Component: 500 - total flux cleaned = -0.000204727 Jy ! Component: 550 - total flux cleaned = -0.000204827 Jy ! Component: 600 - total flux cleaned = -0.000232251 Jy ! Component: 650 - total flux cleaned = -0.000286189 Jy ! Component: 700 - total flux cleaned = -0.000392692 Jy ! Component: 750 - total flux cleaned = -0.000470895 Jy ! Component: 800 - total flux cleaned = -0.000522157 Jy ! Component: 850 - total flux cleaned = -0.000572615 Jy ! Component: 900 - total flux cleaned = -0.000695576 Jy ! Component: 950 - total flux cleaned = -0.000791895 Jy ! Component: 1000 - total flux cleaned = -0.000863555 Jy ! Component: 1050 - total flux cleaned = -0.00091045 Jy ! Component: 1100 - total flux cleaned = -0.000956652 Jy ! Component: 1150 - total flux cleaned = -0.0011384 Jy ! Component: 1200 - total flux cleaned = -0.00116041 Jy ! Component: 1250 - total flux cleaned = -0.0010937 Jy ! Component: 1300 - total flux cleaned = -0.00115959 Jy ! Component: 1350 - total flux cleaned = -0.00115912 Jy ! Component: 1400 - total flux cleaned = -0.00113785 Jy ! Component: 1450 - total flux cleaned = -0.00118056 Jy ! Component: 1500 - total flux cleaned = -0.00124331 Jy ! Component: 1550 - total flux cleaned = -0.00126428 Jy ! Component: 1600 - total flux cleaned = -0.00128464 Jy ! Component: 1650 - total flux cleaned = -0.00132442 Jy ! Component: 1700 - total flux cleaned = -0.00138403 Jy ! Component: 1750 - total flux cleaned = -0.00140348 Jy ! Component: 1800 - total flux cleaned = -0.0013454 Jy ! Component: 1850 - total flux cleaned = -0.00142222 Jy ! Component: 1900 - total flux cleaned = -0.00144103 Jy ! Component: 1950 - total flux cleaned = -0.00144105 Jy ! Component: 2000 - total flux cleaned = -0.00149668 Jy ! Component: 2050 - total flux cleaned = -0.00157027 Jy ! Component: 2100 - total flux cleaned = -0.00167946 Jy ! Component: 2150 - total flux cleaned = -0.00171517 Jy ! Component: 2200 - total flux cleaned = -0.00175097 Jy ! Component: 2250 - total flux cleaned = -0.00180378 Jy ! Component: 2300 - total flux cleaned = -0.00187358 Jy ! Component: 2350 - total flux cleaned = -0.00192553 Jy ! Component: 2400 - total flux cleaned = -0.00197689 Jy ! Component: 2450 - total flux cleaned = -0.00206159 Jy ! Component: 2500 - total flux cleaned = -0.00206163 Jy ! Component: 2550 - total flux cleaned = -0.00212847 Jy ! Component: 2600 - total flux cleaned = -0.00216149 Jy ! Component: 2650 - total flux cleaned = -0.00222689 Jy ! Component: 2700 - total flux cleaned = -0.00222676 Jy ! Component: 2750 - total flux cleaned = -0.0023073 Jy ! Component: 2800 - total flux cleaned = -0.00237114 Jy ! Component: 2850 - total flux cleaned = -0.00241873 Jy ! Component: 2900 - total flux cleaned = -0.00246565 Jy ! Component: 2950 - total flux cleaned = -0.00254356 Jy ! Component: 3000 - total flux cleaned = -0.0026207 Jy ! Component: 3050 - total flux cleaned = -0.0026055 Jy ! Component: 3100 - total flux cleaned = -0.00265122 Jy ! Component: 3150 - total flux cleaned = -0.0026815 Jy ! Component: 3200 - total flux cleaned = -0.0027266 Jy ! Component: 3250 - total flux cleaned = -0.00274148 Jy ! Component: 3300 - total flux cleaned = -0.00280064 Jy ! Component: 3350 - total flux cleaned = -0.00280057 Jy ! Component: 3400 - total flux cleaned = -0.00281521 Jy ! Component: 3450 - total flux cleaned = -0.00287302 Jy ! Component: 3500 - total flux cleaned = -0.00288722 Jy ! Component: 3550 - total flux cleaned = -0.00291574 Jy ! Component: 3600 - total flux cleaned = -0.00297234 Jy ! Component: 3650 - total flux cleaned = -0.00293011 Jy ! Component: 3700 - total flux cleaned = -0.00295805 Jy ! Component: 3750 - total flux cleaned = -0.00301377 Jy ! Component: 3800 - total flux cleaned = -0.00301376 Jy ! Component: 3850 - total flux cleaned = -0.00306864 Jy ! Component: 3900 - total flux cleaned = -0.00308229 Jy ! Component: 3950 - total flux cleaned = -0.0030959 Jy ! Component: 4000 - total flux cleaned = -0.00313616 Jy ! Component: 4050 - total flux cleaned = -0.00317621 Jy ! Total flux subtracted in 4096 components = -0.00312301 Jy ! Clean residual min=-0.000829 max=0.000771 Jy/beam ! Clean residual mean=0.000001 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.10294 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 338 components and 0.10294 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0119-1654_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 7.961 at -3.02 degrees (North through East) ! Clean map min=-0.0014277 max=0.093513 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0119-1654_S_map.fits wmodel /image_prod/ug002_uva//J0119-1654_S_map.mod ! Writing 338 model components to file: /image_prod/ug002_uva//J0119-1654_S_map.mod wobs /image_prod/ug002_uva//J0119-1654_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0119-1654_S_uvs.fits wwins /image_prod/ug002_uva//J0119-1654_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J0119-1654_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0935129 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000234758 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.75313 0.75313 1.50626 3.01252 6.02504 12.0501 24.1002 48.2003 96.4006 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.093 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 398.337 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0119-1654_S_dfm.log closed on Wed Mar 4 18:59:33 2020