! Started logfile: /image_prod/ug002_uva//J0118-2141_X_e_dfm.log on Wed Mar 4 18:58:31 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0118-2141_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0118-2141_X_e_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! AN table 2: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.909722 visibilities/baseline/integration-bin. ! Found source: J0118-2141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6288 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0118-2141_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.505473Jy sigma=8.071412 ! Fit after self-cal, rms=0.325448Jy sigma=1.844640 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5953 mas, bmaj=1.505 mas, bpa=-0.4085 degrees ! Estimated noise=2.27295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.706864 Jy ! Component: 100 - total flux cleaned = 0.959539 Jy ! Total flux subtracted in 100 components = 0.959539 Jy ! Clean residual min=-0.059040 max=0.119924 Jy/beam ! Clean residual mean=-0.000039 rms=0.012527 Jy/beam ! Combined flux in latest and established models = 0.959539 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.959539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.305132Jy sigma=1.540906 ! Fit after self-cal, rms=0.304665Jy sigma=1.537087 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139973 Jy ! Component: 100 - total flux cleaned = 0.222845 Jy ! Total flux subtracted in 100 components = 0.222845 Jy ! Clean residual min=-0.033518 max=0.049400 Jy/beam ! Clean residual mean=0.000005 rms=0.006957 Jy/beam ! Combined flux in latest and established models = 1.18238 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 8 components and 1.18238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172754Jy sigma=0.884630 ! Fit after self-cal, rms=0.172588Jy sigma=0.883401 ! Inverting map ! Added new window around map position (-0.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550421 Jy ! Component: 100 - total flux cleaned = 0.0902992 Jy ! Total flux subtracted in 100 components = 0.0902992 Jy ! Clean residual min=-0.027562 max=0.037414 Jy/beam ! Clean residual mean=0.000022 rms=0.005568 Jy/beam ! Combined flux in latest and established models = 1.27268 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 1.27268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138276Jy sigma=0.721865 ! Fit after self-cal, rms=0.138131Jy sigma=0.721044 ! Inverting map ! Added new window around map position (0.8, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033817 Jy ! Component: 100 - total flux cleaned = 0.0462473 Jy ! Total flux subtracted in 100 components = 0.0462473 Jy ! Clean residual min=-0.024822 max=0.029779 Jy/beam ! Clean residual mean=0.000030 rms=0.004942 Jy/beam ! Combined flux in latest and established models = 1.31893 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 1.31893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126041Jy sigma=0.662518 ! Fit after self-cal, rms=0.125325Jy sigma=0.658276 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.732 mas, bmaj=1.79 mas, bpa=0.1642 degrees ! Estimated noise=1.67383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226083 Jy ! Component: 100 - total flux cleaned = 0.0350743 Jy ! Component: 150 - total flux cleaned = 0.0390963 Jy ! Component: 200 - total flux cleaned = 0.0413518 Jy ! Total flux subtracted in 200 components = 0.0413518 Jy ! Clean residual min=-0.027333 max=0.026993 Jy/beam ! Clean residual mean=0.000047 rms=0.006500 Jy/beam ! Combined flux in latest and established models = 1.36028 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 1.36028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120282Jy sigma=0.637270 ! Fit after self-cal, rms=0.120044Jy sigma=0.635682 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.732 x 1.79 at 0.1642 degrees (North through East) ! Clean map min=-0.024848 max=1.0002 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 KP 1.08 LA 1.00 ! MK 0.99 NL 1.18 OV 0.93 PT 0.89 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.02 KP 1.07 ! LA 1.02 MK 1.01 OV 0.93 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 1.08 LA 1.02 ! MK 0.97 NL 1.19 OV 0.93 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.01 KP 1.06 ! LA 1.03 MK 1.01 OV 0.93 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 KP 1.08 LA 1.02 ! MK 0.99 NL 1.20 OV 0.93 PT 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.01 KP 1.07 ! LA 1.01 MK 1.02 OV 0.93 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 1.06 LA 1.04 ! MK 0.99 NL 1.19 OV 0.92 PT 0.90 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.02 HN 1.00 KP 1.04 ! LA 1.04 MK 1.02 OV 0.91 PT 0.91 ! SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 KP 1.08 LA 1.02 ! MK 0.98 NL 1.17 OV 0.91 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 HN 1.04 KP 1.07 ! LA 1.02 MK 1.00 OV 0.91 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 KP 1.08 LA 1.04 ! MK 0.99 NL 1.19 OV 0.93 PT 0.90 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 1.01 KP 1.08 ! LA 1.04 MK 1.01 OV 0.92 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 KP 1.07 LA 1.02 ! MK 0.98 NL 1.19 OV 0.92 PT 0.91 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 1.01 KP 1.06 ! LA 1.03 MK 1.01 OV 0.92 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 1.07 LA 1.01 ! MK 1.00 NL 1.18 OV 0.94 PT 0.88 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 1.01 KP 1.06 ! LA 1.02 MK 1.02 OV 0.94 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 KP 1.06 LA 1.00 ! MK 0.98 NL 1.21 OV 0.93 PT 0.91 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.00 HN 1.02 KP 1.05 ! LA 1.01 MK 1.02 OV 0.92 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 KP 1.07 LA 1.02 ! MK 0.99 NL 1.17 OV 0.93 PT 0.90 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.04 HN 1.00 KP 1.06 ! LA 1.02 MK 1.03 OV 0.93 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 1.07 LA 1.03 ! MK 0.96 NL 1.18 OV 0.93 PT 0.91 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.00 KP 1.05 ! LA 1.03 MK 1.00 OV 0.92 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 KP 1.09 LA 1.05 ! MK 0.98 NL 1.20 OV 0.93 PT 0.89 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 HN 1.03 KP 1.07 ! LA 1.03 MK 1.02 OV 0.92 PT 0.93 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.120044Jy sigma=0.635682 ! Fit after self-cal, rms=0.068029Jy sigma=0.376149 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7322 mas, bmaj=1.794 mas, bpa=0.3124 degrees ! Estimated noise=1.67277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00493926 Jy ! Component: 100 - total flux cleaned = -0.00436456 Jy ! Component: 150 - total flux cleaned = -0.00423129 Jy ! Component: 200 - total flux cleaned = -0.00422925 Jy ! Total flux subtracted in 200 components = -0.00422925 Jy ! Clean residual min=-0.007351 max=0.005460 Jy/beam ! Clean residual mean=-0.000007 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 1.35605 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 1.35605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067017Jy sigma=0.369637 ! Fit after self-cal, rms=0.066779Jy sigma=0.368413 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066779Jy sigma=0.368413 ! Fit after self-cal, rms=0.066787Jy sigma=0.368029 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7326 mas, bmaj=1.796 mas, bpa=0.3176 degrees ! Estimated noise=1.67372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00295338 Jy ! Component: 100 - total flux cleaned = -0.00320784 Jy ! Component: 150 - total flux cleaned = -0.00353158 Jy ! Component: 200 - total flux cleaned = -0.00372427 Jy ! Total flux subtracted in 200 components = -0.00372427 Jy ! Clean residual min=-0.006280 max=0.004911 Jy/beam ! Clean residual mean=-0.000007 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 1.35233 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 1.35233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066331Jy sigma=0.364962 ! Fit after self-cal, rms=0.066204Jy sigma=0.364505 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000677392 Jy ! Component: 100 - total flux cleaned = -0.000942638 Jy ! Component: 150 - total flux cleaned = -0.00109612 Jy ! Component: 200 - total flux cleaned = -0.00123567 Jy ! Total flux subtracted in 200 components = -0.00123567 Jy ! Clean residual min=-0.005748 max=0.005017 Jy/beam ! Clean residual mean=-0.000007 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 1.35109 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 1.35109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066004Jy sigma=0.363059 ! Fit after self-cal, rms=0.065947Jy sigma=0.362865 ! Inverting map ! Added new window around map position (-1, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888549 Jy ! Component: 100 - total flux cleaned = 9.86937e-05 Jy ! Component: 150 - total flux cleaned = -0.00060233 Jy ! Component: 200 - total flux cleaned = -0.0013371 Jy ! Total flux subtracted in 200 components = -0.0013371 Jy ! Clean residual min=-0.004494 max=0.004036 Jy/beam ! Clean residual mean=-0.000007 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 1.34976 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 1.34976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065249Jy sigma=0.358812 ! Fit after self-cal, rms=0.065216Jy sigma=0.358709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065216Jy sigma=0.358709 ! Fit after self-cal, rms=0.065231Jy sigma=0.358395 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.796 mas, bpa=0.3578 degrees ! Estimated noise=1.67474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000912269 Jy ! Component: 100 - total flux cleaned = -0.00167952 Jy ! Component: 150 - total flux cleaned = -0.0022626 Jy ! Component: 200 - total flux cleaned = -0.00270394 Jy ! Total flux subtracted in 200 components = -0.00270394 Jy ! Clean residual min=-0.004105 max=0.003637 Jy/beam ! Clean residual mean=-0.000007 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 1.34705 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 1.34705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064940Jy sigma=0.356725 ! Fit after self-cal, rms=0.064922Jy sigma=0.356681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.41026e-05 Jy ! Component: 100 - total flux cleaned = -0.000324841 Jy ! Component: 150 - total flux cleaned = -0.000538958 Jy ! Component: 200 - total flux cleaned = -0.000807576 Jy ! Total flux subtracted in 200 components = -0.000807576 Jy ! Clean residual min=-0.003586 max=0.003509 Jy/beam ! Clean residual mean=-0.000007 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 1.34624 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 1.34625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064779Jy sigma=0.355796 ! Fit after self-cal, rms=0.064767Jy sigma=0.355764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064767Jy sigma=0.355764 ! Fit after self-cal, rms=0.064742Jy sigma=0.355647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.302 mas, bmaj=4.623 mas, bpa=10.81 degrees ! Estimated noise=2.61101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000991033 Jy ! Component: 100 - total flux cleaned = -0.00110299 Jy ! Component: 150 - total flux cleaned = -0.00110373 Jy ! Component: 200 - total flux cleaned = -0.00113201 Jy ! Total flux subtracted in 200 components = -0.00113201 Jy ! Clean residual min=-0.004395 max=0.004507 Jy/beam ! Clean residual mean=-0.000017 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 1.34511 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 91 components and 1.34511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064722Jy sigma=0.355565 ! Fit after self-cal, rms=0.064720Jy sigma=0.355524 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.38227e-05 Jy ! Component: 100 - total flux cleaned = -3.67521e-05 Jy ! Component: 150 - total flux cleaned = -1.3542e-05 Jy ! Component: 200 - total flux cleaned = 7.61033e-06 Jy ! Total flux subtracted in 200 components = 7.61033e-06 Jy ! Clean residual min=-0.004341 max=0.004469 Jy/beam ! Clean residual mean=-0.000016 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 1.34512 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 1.34512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064712Jy sigma=0.355522 ! Fit after self-cal, rms=0.064710Jy sigma=0.355502 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7331 mas, bmaj=1.795 mas, bpa=0.3909 degrees ! Estimated noise=1.67434 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7331 x 1.795 at 0.3909 degrees (North through East) ! Clean map min=-0.00572 max=1.0038 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064710Jy sigma=0.355502 ! Fit after self-cal, rms=0.060140Jy sigma=0.323360 ! Inverting map and beam ! Estimated beam: bmin=0.733 mas, bmaj=1.797 mas, bpa=0.3657 degrees ! Estimated noise=1.67446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116738 Jy ! Component: 100 - total flux cleaned = -0.000447043 Jy ! Component: 150 - total flux cleaned = -0.000625718 Jy ! Component: 200 - total flux cleaned = -0.000791749 Jy ! Total flux subtracted in 200 components = -0.000791749 Jy ! Clean residual min=-0.003071 max=0.003507 Jy/beam ! Clean residual mean=-0.000007 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 1.34433 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 1.34433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060039Jy sigma=0.322593 ! Fit after self-cal, rms=0.060028Jy sigma=0.322573 ! Inverting map ! Added new window around map position (20, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295413 Jy ! Component: 100 - total flux cleaned = 0.00406114 Jy ! Component: 150 - total flux cleaned = 0.00427619 Jy ! Component: 200 - total flux cleaned = 0.00422841 Jy ! Total flux subtracted in 200 components = 0.00422841 Jy ! Clean residual min=-0.003056 max=0.003041 Jy/beam ! Clean residual mean=-0.000006 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 1.34856 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 1.34856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059860Jy sigma=0.321594 ! Fit after self-cal, rms=0.059839Jy sigma=0.321538 ! Inverting map ! Added new window around map position (12, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275594 Jy ! Component: 100 - total flux cleaned = 0.00406519 Jy ! Component: 150 - total flux cleaned = 0.00464304 Jy ! Component: 200 - total flux cleaned = 0.00497891 Jy ! Total flux subtracted in 200 components = 0.00497891 Jy ! Clean residual min=-0.002851 max=0.002824 Jy/beam ! Clean residual mean=-0.000003 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 1.35354 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 128 components and 1.35354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059685Jy sigma=0.320684 ! Fit after self-cal, rms=0.059673Jy sigma=0.320645 ! Inverting map ! Added new window around map position (-2.6, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275939 Jy ! Component: 100 - total flux cleaned = 0.0042759 Jy ! Component: 150 - total flux cleaned = 0.00536014 Jy ! Component: 200 - total flux cleaned = 0.00579815 Jy ! Total flux subtracted in 200 components = 0.00579815 Jy ! Clean residual min=-0.002749 max=0.002719 Jy/beam ! Clean residual mean=-0.000003 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 1.35933 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 142 components and 1.35933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059541Jy sigma=0.319731 ! Fit after self-cal, rms=0.059535Jy sigma=0.319702 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059535Jy sigma=0.319702 ! Fit after self-cal, rms=0.059495Jy sigma=0.319509 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5954 mas, bmaj=1.508 mas, bpa=-0.08232 degrees ! Estimated noise=2.27433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.708425 Jy ! Component: 100 - total flux cleaned = 0.961453 Jy ! Component: 150 - total flux cleaned = 1.10026 Jy ! Component: 200 - total flux cleaned = 1.18677 Jy ! Total flux subtracted in 200 components = 1.18677 Jy ! Clean residual min=-0.023374 max=0.046091 Jy/beam ! Clean residual mean=-0.000029 rms=0.005305 Jy/beam ! Combined flux in latest and established models = 1.18677 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.18677 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7331 mas, bmaj=1.797 mas, bpa=0.3922 degrees ! Estimated noise=1.67461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0777491 Jy ! Component: 100 - total flux cleaned = 0.119124 Jy ! Component: 150 - total flux cleaned = 0.142469 Jy ! Component: 200 - total flux cleaned = 0.155897 Jy ! Total flux subtracted in 200 components = 0.155897 Jy ! Clean residual min=-0.006335 max=0.007622 Jy/beam ! Clean residual mean=-0.000010 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 1.34267 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 1.34267 Jy ! Inverting map ! Added new window around map position (1.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543481 Jy ! Component: 100 - total flux cleaned = 0.0081456 Jy ! Component: 150 - total flux cleaned = 0.00934179 Jy ! Component: 200 - total flux cleaned = 0.0104198 Jy ! Total flux subtracted in 200 components = 0.0104198 Jy ! Clean residual min=-0.005601 max=0.005239 Jy/beam ! Clean residual mean=-0.000006 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 1.35309 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 38 components and 1.35309 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=4.626 mas, bpa=10.81 degrees ! Estimated noise=2.60926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327384 Jy ! Component: 100 - total flux cleaned = 0.00549701 Jy ! Component: 150 - total flux cleaned = 0.00695639 Jy ! Component: 200 - total flux cleaned = 0.00766671 Jy ! Total flux subtracted in 200 components = 0.00766671 Jy ! Clean residual min=-0.003557 max=0.003125 Jy/beam ! Clean residual mean=-0.000007 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 1.36076 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534015 Jy ! Component: 100 - total flux cleaned = 0.000922911 Jy ! Component: 150 - total flux cleaned = 0.00105848 Jy ! Component: 200 - total flux cleaned = 0.00118494 Jy ! Total flux subtracted in 200 components = 0.00118494 Jy ! Clean residual min=-0.003296 max=0.002650 Jy/beam ! Clean residual mean=-0.000006 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 1.36194 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 91 components and 1.36194 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7331 mas, bmaj=1.797 mas, bpa=0.3922 degrees ! Estimated noise=1.67461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173867 Jy ! Component: 100 - total flux cleaned = -0.00191396 Jy ! Component: 150 - total flux cleaned = -0.0022163 Jy ! Component: 200 - total flux cleaned = -0.00207641 Jy ! Total flux subtracted in 200 components = -0.00207641 Jy ! Clean residual min=-0.003797 max=0.003481 Jy/beam ! Clean residual mean=-0.000003 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 1.35987 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 1.35987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060283Jy sigma=0.326409 ! Fit after self-cal, rms=0.060247Jy sigma=0.325777 wmodel J0118-2141_X_e_map.mod ! Writing 104 model components to file: J0118-2141_X_e_map.mod wobs J0118-2141_X_e_uvs.fits ! Writing UV FITS file: J0118-2141_X_e_uvs.fits wwins J0118-2141_X_e_map.win ! wwins: Wrote 8 windows to J0118-2141_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140518 Jy ! Component: 100 - total flux cleaned = -7.82887e-05 Jy ! Component: 150 - total flux cleaned = 0.00026373 Jy ! Component: 200 - total flux cleaned = 0.000480923 Jy ! Component: 250 - total flux cleaned = 0.000741569 Jy ! Component: 300 - total flux cleaned = 0.00109179 Jy ! Component: 350 - total flux cleaned = 0.00118745 Jy ! Component: 400 - total flux cleaned = 0.0012341 Jy ! Component: 450 - total flux cleaned = 0.00128071 Jy ! Component: 500 - total flux cleaned = 0.00137033 Jy ! Component: 550 - total flux cleaned = 0.001456 Jy ! Component: 600 - total flux cleaned = 0.00158187 Jy ! Component: 650 - total flux cleaned = 0.00137523 Jy ! Component: 700 - total flux cleaned = 0.00153658 Jy ! Component: 750 - total flux cleaned = 0.00157581 Jy ! Component: 800 - total flux cleaned = 0.00172999 Jy ! Component: 850 - total flux cleaned = 0.00188129 Jy ! Component: 900 - total flux cleaned = 0.00199318 Jy ! Component: 950 - total flux cleaned = 0.00210305 Jy ! Component: 1000 - total flux cleaned = 0.00231916 Jy ! Component: 1050 - total flux cleaned = 0.00242486 Jy ! Component: 1100 - total flux cleaned = 0.00259838 Jy ! Component: 1150 - total flux cleaned = 0.0026668 Jy ! Component: 1200 - total flux cleaned = 0.0028015 Jy ! Component: 1250 - total flux cleaned = 0.00283435 Jy ! Component: 1300 - total flux cleaned = 0.00276961 Jy ! Component: 1350 - total flux cleaned = 0.0027696 Jy ! Component: 1400 - total flux cleaned = 0.00276942 Jy ! Component: 1450 - total flux cleaned = 0.00283212 Jy ! Component: 1500 - total flux cleaned = 0.00280091 Jy ! Component: 1550 - total flux cleaned = 0.0027696 Jy ! Component: 1600 - total flux cleaned = 0.00270874 Jy ! Component: 1650 - total flux cleaned = 0.00270862 Jy ! Component: 1700 - total flux cleaned = 0.00270831 Jy ! Component: 1750 - total flux cleaned = 0.00256214 Jy ! Component: 1800 - total flux cleaned = 0.00256236 Jy ! Component: 1850 - total flux cleaned = 0.00244801 Jy ! Component: 1900 - total flux cleaned = 0.0023916 Jy ! Component: 1950 - total flux cleaned = 0.00227963 Jy ! Component: 2000 - total flux cleaned = 0.00216966 Jy ! Component: 2050 - total flux cleaned = 0.00208806 Jy ! Component: 2100 - total flux cleaned = 0.00208817 Jy ! Component: 2150 - total flux cleaned = 0.00211485 Jy ! Component: 2200 - total flux cleaned = 0.00192988 Jy ! Component: 2250 - total flux cleaned = 0.00195652 Jy ! Component: 2300 - total flux cleaned = 0.00190483 Jy ! Component: 2350 - total flux cleaned = 0.00182792 Jy ! Component: 2400 - total flux cleaned = 0.00182782 Jy ! Component: 2450 - total flux cleaned = 0.00182806 Jy ! Component: 2500 - total flux cleaned = 0.00177775 Jy ! Component: 2550 - total flux cleaned = 0.0018025 Jy ! Component: 2600 - total flux cleaned = 0.00177784 Jy ! Component: 2650 - total flux cleaned = 0.00172919 Jy ! Component: 2700 - total flux cleaned = 0.00168114 Jy ! Component: 2750 - total flux cleaned = 0.00165731 Jy ! Component: 2800 - total flux cleaned = 0.001728 Jy ! Component: 2850 - total flux cleaned = 0.00168086 Jy ! Component: 2900 - total flux cleaned = 0.00172725 Jy ! Component: 2950 - total flux cleaned = 0.00170397 Jy ! Component: 3000 - total flux cleaned = 0.00161267 Jy ! Component: 3050 - total flux cleaned = 0.00156725 Jy ! Component: 3100 - total flux cleaned = 0.00150009 Jy ! Component: 3150 - total flux cleaned = 0.00152196 Jy ! Component: 3200 - total flux cleaned = 0.00141163 Jy ! Component: 3250 - total flux cleaned = 0.00141172 Jy ! Component: 3300 - total flux cleaned = 0.00141183 Jy ! Component: 3350 - total flux cleaned = 0.00141195 Jy ! Component: 3400 - total flux cleaned = 0.00136914 Jy ! Component: 3450 - total flux cleaned = 0.00132663 Jy ! Component: 3500 - total flux cleaned = 0.00128435 Jy ! Component: 3550 - total flux cleaned = 0.00126316 Jy ! Component: 3600 - total flux cleaned = 0.00122157 Jy ! Component: 3650 - total flux cleaned = 0.00120082 Jy ! Component: 3700 - total flux cleaned = 0.00118043 Jy ! Component: 3750 - total flux cleaned = 0.00120066 Jy ! Component: 3800 - total flux cleaned = 0.00112014 Jy ! Component: 3850 - total flux cleaned = 0.00108025 Jy ! Component: 3900 - total flux cleaned = 0.00113976 Jy ! Component: 3950 - total flux cleaned = 0.00112 Jy ! Component: 4000 - total flux cleaned = 0.00115907 Jy ! Component: 4050 - total flux cleaned = 0.0011394 Jy ! Total flux subtracted in 4096 components = 0.0011783 Jy ! Clean residual min=-0.001178 max=0.001074 Jy/beam ! Clean residual mean=-0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 1.36104 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 410 components and 1.36104 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0118-2141_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7331 x 1.797 at 0.3922 degrees (North through East) ! Clean map min=-0.0039733 max=1.0102 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0118-2141_X_e_map.fits wmodel /image_prod/ug002_uva//J0118-2141_X_e_map.mod ! Writing 410 model components to file: /image_prod/ug002_uva//J0118-2141_X_e_map.mod wobs /image_prod/ug002_uva//J0118-2141_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0118-2141_X_e_uvs.fits wwins /image_prod/ug002_uva//J0118-2141_X_e_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0118-2141_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.0102 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324017 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0962239 0.0962239 0.192448 0.384895 0.769791 1.53958 3.07916 6.15833 12.3167 24.6333 49.2666 98.5332 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.01 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3117.73 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0118-2141_X_e_dfm.log closed on Wed Mar 4 18:58:36 2020