! Started logfile: /image_prod/ug002_uva//J0118-2141_X_d_dfm.log on Wed Mar 4 18:58:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0118-2141_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0118-2141_X_d_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895833 visibilities/baseline/integration-bin. ! Found source: J0118-2141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7740 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0118-2141_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.549084Jy sigma=8.159487 ! Fit after self-cal, rms=0.348176Jy sigma=1.818511 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6165 mas, bmaj=1.541 mas, bpa=-1.871 degrees ! Estimated noise=2.36589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.734763 Jy ! Component: 100 - total flux cleaned = 0.986069 Jy ! Total flux subtracted in 100 components = 0.986069 Jy ! Clean residual min=-0.058760 max=0.116236 Jy/beam ! Clean residual mean=-0.000050 rms=0.012864 Jy/beam ! Combined flux in latest and established models = 0.986069 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.986069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.326437Jy sigma=1.602923 ! Fit after self-cal, rms=0.325958Jy sigma=1.599868 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134144 Jy ! Component: 100 - total flux cleaned = 0.210637 Jy ! Total flux subtracted in 100 components = 0.210637 Jy ! Clean residual min=-0.043372 max=0.069037 Jy/beam ! Clean residual mean=-0.000021 rms=0.008853 Jy/beam ! Combined flux in latest and established models = 1.19671 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 6 components and 1.19671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.227941Jy sigma=1.085975 ! Fit after self-cal, rms=0.227770Jy sigma=1.085120 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621244 Jy ! Component: 100 - total flux cleaned = 0.100741 Jy ! Total flux subtracted in 100 components = 0.100741 Jy ! Clean residual min=-0.038858 max=0.044377 Jy/beam ! Clean residual mean=-0.000009 rms=0.007648 Jy/beam ! Combined flux in latest and established models = 1.29745 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 1.29745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200198Jy sigma=0.944929 ! Fit after self-cal, rms=0.198422Jy sigma=0.934055 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7699 mas, bmaj=1.857 mas, bpa=-1.571 degrees ! Estimated noise=1.58623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490111 Jy ! Component: 100 - total flux cleaned = 0.0795211 Jy ! Component: 150 - total flux cleaned = 0.0995927 Jy ! Component: 200 - total flux cleaned = 0.108768 Jy ! Total flux subtracted in 200 components = 0.108768 Jy ! Clean residual min=-0.035401 max=0.045301 Jy/beam ! Clean residual mean=0.000025 rms=0.008670 Jy/beam ! Combined flux in latest and established models = 1.40621 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 1.40621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.182898Jy sigma=0.859869 ! Fit after self-cal, rms=0.181862Jy sigma=0.854061 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7699 x 1.857 at -1.571 degrees (North through East) ! Clean map min=-0.031464 max=1.0318 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.29 KP 1.05 ! LA 1.02 MK 1.03 NL 1.04 OV 1.00 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.20 KP 1.03 ! LA 1.02 MK 1.00 NL 1.04 OV 0.97 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.22 KP 1.02 ! LA 0.99 MK 1.02 NL 1.04 OV 0.97 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.28 KP 1.01 ! LA 1.04 MK 1.02 NL 1.03 OV 0.98 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 1.20 KP 1.02 ! LA 0.99 MK 1.01 NL 1.05 OV 0.98 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.18 KP 1.01 ! LA 0.97 MK 1.00 NL 1.05 OV 0.98 ! PT 0.88 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.17 KP 1.01 ! LA 0.98 MK 1.07 NL 1.06 OV 0.96 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.18 KP 1.03 ! LA 1.00 MK 0.99 NL 1.02 OV 0.99 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.24 KP 0.99 ! LA 1.01 MK 0.99 NL 1.01 OV 0.96 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.20 KP 1.02 ! LA 0.98 MK 1.05 NL 1.03 OV 0.98 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.17 KP 1.02 ! LA 1.01 MK 1.00 NL 1.01 OV 0.96 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.94 HN 1.22 KP 1.01 ! LA 0.99 MK 1.05 NL 1.04 OV 0.98 ! PT 0.87 SC 1.00 ! ! ! Fit before self-cal, rms=0.181862Jy sigma=0.854061 ! Fit after self-cal, rms=0.151842Jy sigma=0.651238 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7798 mas, bmaj=1.857 mas, bpa=-0.9013 degrees ! Estimated noise=1.59565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.017181 Jy ! Component: 100 - total flux cleaned = -0.0199221 Jy ! Component: 150 - total flux cleaned = -0.0208545 Jy ! Component: 200 - total flux cleaned = -0.0215999 Jy ! Total flux subtracted in 200 components = -0.0215999 Jy ! Clean residual min=-0.029825 max=0.024012 Jy/beam ! Clean residual mean=-0.000004 rms=0.005366 Jy/beam ! Combined flux in latest and established models = 1.38461 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 1.38461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146210Jy sigma=0.624115 ! Fit after self-cal, rms=0.145491Jy sigma=0.619299 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145491Jy sigma=0.619299 ! Fit after self-cal, rms=0.099330Jy sigma=0.435887 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.78 mas, bmaj=1.858 mas, bpa=-1.213 degrees ! Estimated noise=1.59921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0142884 Jy ! Component: 100 - total flux cleaned = -0.016658 Jy ! Component: 150 - total flux cleaned = -0.0188521 Jy ! Component: 200 - total flux cleaned = -0.0197437 Jy ! Total flux subtracted in 200 components = -0.0197437 Jy ! Clean residual min=-0.013016 max=0.010042 Jy/beam ! Clean residual mean=-0.000007 rms=0.002183 Jy/beam ! Combined flux in latest and established models = 1.36487 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 1.36487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095551Jy sigma=0.416043 ! Fit after self-cal, rms=0.095049Jy sigma=0.412782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00329732 Jy ! Component: 100 - total flux cleaned = -0.00462768 Jy ! Component: 150 - total flux cleaned = -0.00522056 Jy ! Component: 200 - total flux cleaned = -0.00535484 Jy ! Total flux subtracted in 200 components = -0.00535484 Jy ! Clean residual min=-0.010690 max=0.010090 Jy/beam ! Clean residual mean=-0.000008 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 1.35952 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 1.35952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094286Jy sigma=0.408490 ! Fit after self-cal, rms=0.094186Jy sigma=0.408068 ! Inverting map ! Added new window around map position (2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722228 Jy ! Component: 100 - total flux cleaned = 0.00788936 Jy ! Component: 150 - total flux cleaned = 0.00816942 Jy ! Component: 200 - total flux cleaned = 0.00795613 Jy ! Total flux subtracted in 200 components = 0.00795613 Jy ! Clean residual min=-0.009633 max=0.009602 Jy/beam ! Clean residual mean=-0.000006 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 1.36747 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 1.36747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092356Jy sigma=0.394910 ! Fit after self-cal, rms=0.092083Jy sigma=0.394165 ! Inverting map ! Added new window around map position (-1.2, 27.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712902 Jy ! Component: 100 - total flux cleaned = 0.00737033 Jy ! Component: 150 - total flux cleaned = 0.00695753 Jy ! Component: 200 - total flux cleaned = 0.00657623 Jy ! Total flux subtracted in 200 components = 0.00657623 Jy ! Clean residual min=-0.008558 max=0.007812 Jy/beam ! Clean residual mean=-0.000004 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 1.37405 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 1.37405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090847Jy sigma=0.386644 ! Fit after self-cal, rms=0.090711Jy sigma=0.386242 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090711Jy sigma=0.386242 ! Fit after self-cal, rms=0.090491Jy sigma=0.383131 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7804 mas, bmaj=1.858 mas, bpa=-1.201 degrees ! Estimated noise=1.60068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0068382 Jy ! Component: 100 - total flux cleaned = -0.00723656 Jy ! Component: 150 - total flux cleaned = -0.00758191 Jy ! Component: 200 - total flux cleaned = -0.00773457 Jy ! Total flux subtracted in 200 components = -0.00773457 Jy ! Clean residual min=-0.007709 max=0.007576 Jy/beam ! Clean residual mean=-0.000007 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 1.36631 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 79 components and 1.36631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089568Jy sigma=0.377814 ! Fit after self-cal, rms=0.089487Jy sigma=0.377536 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66141e-05 Jy ! Component: 100 - total flux cleaned = 9.75701e-05 Jy ! Component: 150 - total flux cleaned = 9.62942e-05 Jy ! Component: 200 - total flux cleaned = -3.7915e-05 Jy ! Total flux subtracted in 200 components = -3.7915e-05 Jy ! Clean residual min=-0.007421 max=0.007342 Jy/beam ! Clean residual mean=-0.000008 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 1.36628 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 1.36628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089033Jy sigma=0.374937 ! Fit after self-cal, rms=0.088982Jy sigma=0.374813 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088982Jy sigma=0.374813 ! Fit after self-cal, rms=0.089038Jy sigma=0.374047 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.12 mas, bmaj=4.407 mas, bpa=5.322 degrees ! Estimated noise=2.28504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00437809 Jy ! Component: 100 - total flux cleaned = -0.00607107 Jy ! Component: 150 - total flux cleaned = -0.00731187 Jy ! Component: 200 - total flux cleaned = -0.00844205 Jy ! Total flux subtracted in 200 components = -0.00844205 Jy ! Clean residual min=-0.006972 max=0.005779 Jy/beam ! Clean residual mean=-0.000018 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 1.35783 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 91 components and 1.35783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088782Jy sigma=0.374380 ! Fit after self-cal, rms=0.088694Jy sigma=0.373632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105582 Jy ! Component: 100 - total flux cleaned = -0.00123112 Jy ! Component: 150 - total flux cleaned = -0.00146697 Jy ! Component: 200 - total flux cleaned = -0.00146751 Jy ! Total flux subtracted in 200 components = -0.00146751 Jy ! Clean residual min=-0.006257 max=0.005757 Jy/beam ! Clean residual mean=-0.000018 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 1.35637 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 97 components and 1.35637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088685Jy sigma=0.374185 ! Fit after self-cal, rms=0.088672Jy sigma=0.373999 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7807 mas, bmaj=1.858 mas, bpa=-1.194 degrees ! Estimated noise=1.60067 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7807 x 1.858 at -1.194 degrees (North through East) ! Clean map min=-0.0090004 max=1.0486 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088672Jy sigma=0.373999 ! Fit after self-cal, rms=0.084902Jy sigma=0.347875 ! Inverting map and beam ! Estimated beam: bmin=0.7813 mas, bmaj=1.858 mas, bpa=-1.052 degrees ! Estimated noise=1.60335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00278885 Jy ! Component: 100 - total flux cleaned = -0.00325278 Jy ! Component: 150 - total flux cleaned = -0.00325861 Jy ! Component: 200 - total flux cleaned = -0.00338559 Jy ! Total flux subtracted in 200 components = -0.00338559 Jy ! Clean residual min=-0.006011 max=0.006913 Jy/beam ! Clean residual mean=-0.000007 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 1.35298 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 1.35298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084476Jy sigma=0.344721 ! Fit after self-cal, rms=0.084443Jy sigma=0.344654 ! Inverting map ! Added new window around map position (-0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029044 Jy ! Component: 100 - total flux cleaned = 0.00205167 Jy ! Component: 150 - total flux cleaned = 0.00168027 Jy ! Component: 200 - total flux cleaned = 0.00145328 Jy ! Total flux subtracted in 200 components = 0.00145328 Jy ! Clean residual min=-0.005541 max=0.004450 Jy/beam ! Clean residual mean=-0.000006 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 1.35443 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 118 components and 1.35443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083904Jy sigma=0.340979 ! Fit after self-cal, rms=0.083877Jy sigma=0.340801 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083877Jy sigma=0.340801 ! Fit after self-cal, rms=0.083763Jy sigma=0.339881 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6219 mas, bmaj=1.53 mas, bpa=-1.174 degrees ! Estimated noise=2.41805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.751191 Jy ! Component: 100 - total flux cleaned = 1.00307 Jy ! Component: 150 - total flux cleaned = 1.13802 Jy ! Component: 200 - total flux cleaned = 1.21858 Jy ! Total flux subtracted in 200 components = 1.21858 Jy ! Clean residual min=-0.025437 max=0.041240 Jy/beam ! Clean residual mean=-0.000018 rms=0.004622 Jy/beam ! Combined flux in latest and established models = 1.21858 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.21858 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7798 mas, bmaj=1.855 mas, bpa=-1.03 degrees ! Estimated noise=1.60103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592274 Jy ! Component: 100 - total flux cleaned = 0.0895984 Jy ! Component: 150 - total flux cleaned = 0.106079 Jy ! Component: 200 - total flux cleaned = 0.11066 Jy ! Total flux subtracted in 200 components = 0.11066 Jy ! Clean residual min=-0.009070 max=0.011836 Jy/beam ! Clean residual mean=-0.000011 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 1.32924 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 1.32924 Jy ! Inverting map ! Added new window around map position (-10.4, 21.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586662 Jy ! Component: 100 - total flux cleaned = 0.00893033 Jy ! Component: 150 - total flux cleaned = 0.0112755 Jy ! Component: 200 - total flux cleaned = 0.0133639 Jy ! Total flux subtracted in 200 components = 0.0133639 Jy ! Clean residual min=-0.007159 max=0.007918 Jy/beam ! Clean residual mean=-0.000009 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 1.3426 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 1.3426 Jy ! Inverting map ! Added new window around map position (0.8, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269573 Jy ! Component: 100 - total flux cleaned = 0.0034448 Jy ! Component: 150 - total flux cleaned = 0.00414416 Jy ! Component: 200 - total flux cleaned = 0.00479849 Jy ! Total flux subtracted in 200 components = 0.00479849 Jy ! Clean residual min=-0.006277 max=0.005657 Jy/beam ! Clean residual mean=-0.000009 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 1.3474 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 1.3474 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.122 mas, bmaj=4.405 mas, bpa=5.421 degrees ! Estimated noise=2.28878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215996 Jy ! Component: 100 - total flux cleaned = 0.00276965 Jy ! Component: 150 - total flux cleaned = 0.00318596 Jy ! Component: 200 - total flux cleaned = 0.00355115 Jy ! Total flux subtracted in 200 components = 0.00355115 Jy ! Clean residual min=-0.005232 max=0.004855 Jy/beam ! Clean residual mean=-0.000018 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 1.35095 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406449 Jy ! Component: 100 - total flux cleaned = 0.000702358 Jy ! Component: 150 - total flux cleaned = 0.00103693 Jy ! Component: 200 - total flux cleaned = 0.00122216 Jy ! Total flux subtracted in 200 components = 0.00122216 Jy ! Clean residual min=-0.005064 max=0.004748 Jy/beam ! Clean residual mean=-0.000016 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 1.35218 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 83 components and 1.35218 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7798 mas, bmaj=1.855 mas, bpa=-1.03 degrees ! Estimated noise=1.60103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.91799e-05 Jy ! Component: 100 - total flux cleaned = 0.000419777 Jy ! Component: 150 - total flux cleaned = 0.00041676 Jy ! Component: 200 - total flux cleaned = 0.000574362 Jy ! Total flux subtracted in 200 components = 0.000574362 Jy ! Clean residual min=-0.005538 max=0.005113 Jy/beam ! Clean residual mean=-0.000007 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 1.35275 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 1.35275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083836Jy sigma=0.343128 ! Fit after self-cal, rms=0.083645Jy sigma=0.341578 wmodel J0118-2141_X_d_map.mod ! Writing 94 model components to file: J0118-2141_X_d_map.mod wobs J0118-2141_X_d_uvs.fits ! Writing UV FITS file: J0118-2141_X_d_uvs.fits wwins J0118-2141_X_d_map.win ! wwins: Wrote 7 windows to J0118-2141_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613914 Jy ! Component: 100 - total flux cleaned = -0.000699199 Jy ! Component: 150 - total flux cleaned = -0.000623685 Jy ! Component: 200 - total flux cleaned = -0.000247281 Jy ! Component: 250 - total flux cleaned = 4.04046e-05 Jy ! Component: 300 - total flux cleaned = 0.000458268 Jy ! Component: 350 - total flux cleaned = 0.00106473 Jy ! Component: 400 - total flux cleaned = 0.00152329 Jy ! Component: 450 - total flux cleaned = 0.00209583 Jy ! Component: 500 - total flux cleaned = 0.00246699 Jy ! Component: 550 - total flux cleaned = 0.0028292 Jy ! Component: 600 - total flux cleaned = 0.00306421 Jy ! Component: 650 - total flux cleaned = 0.0031785 Jy ! Component: 700 - total flux cleaned = 0.00340466 Jy ! Component: 750 - total flux cleaned = 0.00362583 Jy ! Component: 800 - total flux cleaned = 0.0038968 Jy ! Component: 850 - total flux cleaned = 0.00410849 Jy ! Component: 900 - total flux cleaned = 0.00421308 Jy ! Component: 950 - total flux cleaned = 0.00441637 Jy ! Component: 1000 - total flux cleaned = 0.00436716 Jy ! Component: 1050 - total flux cleaned = 0.00451366 Jy ! Component: 1100 - total flux cleaned = 0.00436935 Jy ! Component: 1150 - total flux cleaned = 0.00437021 Jy ! Component: 1200 - total flux cleaned = 0.0044168 Jy ! Component: 1250 - total flux cleaned = 0.00437091 Jy ! Component: 1300 - total flux cleaned = 0.00419024 Jy ! Component: 1350 - total flux cleaned = 0.00423554 Jy ! Component: 1400 - total flux cleaned = 0.00414739 Jy ! Component: 1450 - total flux cleaned = 0.00423276 Jy ! Component: 1500 - total flux cleaned = 0.00410488 Jy ! Component: 1550 - total flux cleaned = 0.00393848 Jy ! Component: 1600 - total flux cleaned = 0.00398088 Jy ! Component: 1650 - total flux cleaned = 0.00410186 Jy ! Component: 1700 - total flux cleaned = 0.00418021 Jy ! Component: 1750 - total flux cleaned = 0.00410076 Jy ! Component: 1800 - total flux cleaned = 0.00421738 Jy ! Component: 1850 - total flux cleaned = 0.00414021 Jy ! Component: 1900 - total flux cleaned = 0.00417803 Jy ! Component: 1950 - total flux cleaned = 0.00406604 Jy ! Component: 2000 - total flux cleaned = 0.00406634 Jy ! Component: 2050 - total flux cleaned = 0.00406663 Jy ! Component: 2100 - total flux cleaned = 0.0039219 Jy ! Component: 2150 - total flux cleaned = 0.00402841 Jy ! Component: 2200 - total flux cleaned = 0.00402803 Jy ! Component: 2250 - total flux cleaned = 0.00409737 Jy ! Component: 2300 - total flux cleaned = 0.00406298 Jy ! Component: 2350 - total flux cleaned = 0.00402889 Jy ! Component: 2400 - total flux cleaned = 0.00409618 Jy ! Component: 2450 - total flux cleaned = 0.00422922 Jy ! Component: 2500 - total flux cleaned = 0.00419592 Jy ! Component: 2550 - total flux cleaned = 0.0042287 Jy ! Component: 2600 - total flux cleaned = 0.00422854 Jy ! Component: 2650 - total flux cleaned = 0.00432481 Jy ! Component: 2700 - total flux cleaned = 0.00435663 Jy ! Component: 2750 - total flux cleaned = 0.00451413 Jy ! Component: 2800 - total flux cleaned = 0.00445237 Jy ! Component: 2850 - total flux cleaned = 0.00448334 Jy ! Component: 2900 - total flux cleaned = 0.00463597 Jy ! Component: 2950 - total flux cleaned = 0.00466656 Jy ! Component: 3000 - total flux cleaned = 0.00454684 Jy ! Component: 3050 - total flux cleaned = 0.00454737 Jy ! Component: 3100 - total flux cleaned = 0.00454753 Jy ! Component: 3150 - total flux cleaned = 0.00457652 Jy ! Component: 3200 - total flux cleaned = 0.00448938 Jy ! Component: 3250 - total flux cleaned = 0.00454669 Jy ! Component: 3300 - total flux cleaned = 0.00457485 Jy ! Component: 3350 - total flux cleaned = 0.00443359 Jy ! Component: 3400 - total flux cleaned = 0.00440542 Jy ! Component: 3450 - total flux cleaned = 0.00448835 Jy ! Component: 3500 - total flux cleaned = 0.0042962 Jy ! Component: 3550 - total flux cleaned = 0.00440473 Jy ! Component: 3600 - total flux cleaned = 0.00426951 Jy ! Component: 3650 - total flux cleaned = 0.00437647 Jy ! Component: 3700 - total flux cleaned = 0.00429631 Jy ! Component: 3750 - total flux cleaned = 0.00429625 Jy ! Component: 3800 - total flux cleaned = 0.00427027 Jy ! Component: 3850 - total flux cleaned = 0.00424416 Jy ! Component: 3900 - total flux cleaned = 0.0042959 Jy ! Component: 3950 - total flux cleaned = 0.00432167 Jy ! Component: 4000 - total flux cleaned = 0.00434696 Jy ! Component: 4050 - total flux cleaned = 0.00432162 Jy ! Total flux subtracted in 4096 components = 0.00429672 Jy ! Clean residual min=-0.001334 max=0.001329 Jy/beam ! Clean residual mean=-0.000003 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 1.35705 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 392 components and 1.35705 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0118-2141_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7798 x 1.855 at -1.03 degrees (North through East) ! Clean map min=-0.0045852 max=1.0592 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0118-2141_X_d_map.fits wmodel /image_prod/ug002_uva//J0118-2141_X_d_map.mod ! Writing 392 model components to file: /image_prod/ug002_uva//J0118-2141_X_d_map.mod wobs /image_prod/ug002_uva//J0118-2141_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0118-2141_X_d_uvs.fits wwins /image_prod/ug002_uva//J0118-2141_X_d_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0118-2141_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.05921 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000423571 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.119968 0.119968 0.239935 0.479871 0.959741 1.91948 3.83897 7.67793 15.3559 30.7117 61.4234 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.059 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2500.67 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0118-2141_X_d_dfm.log closed on Wed Mar 4 18:58:30 2020