! Started logfile: /image_prod/ug002_uva//J0118-2141_X_c_dfm.log on Wed Mar 4 18:58:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0118-2141_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0118-2141_X_c_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.94213 visibilities/baseline/integration-bin. ! Found source: J0118-2141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 9768 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0118-2141_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.408019Jy sigma=7.551517 ! Fit after self-cal, rms=0.507794Jy sigma=3.220136 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5767 mas, bmaj=1.554 mas, bpa=-0.6139 degrees ! Estimated noise=1.91399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.548458 Jy ! Component: 100 - total flux cleaned = 0.744887 Jy ! Total flux subtracted in 100 components = 0.744887 Jy ! Clean residual min=-0.081536 max=0.132361 Jy/beam ! Clean residual mean=0.000088 rms=0.017332 Jy/beam ! Combined flux in latest and established models = 0.744887 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.744887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.483564Jy sigma=2.670121 ! Fit after self-cal, rms=0.482800Jy sigma=2.664363 ! Inverting map ! Added new window around map position (1.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131407 Jy ! Component: 100 - total flux cleaned = 0.213463 Jy ! Total flux subtracted in 100 components = 0.213463 Jy ! Clean residual min=-0.071774 max=0.105888 Jy/beam ! Clean residual mean=0.000062 rms=0.015157 Jy/beam ! Combined flux in latest and established models = 0.95835 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.95835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.421327Jy sigma=2.456325 ! Fit after self-cal, rms=0.417732Jy sigma=2.439837 ! Inverting map ! Added new window around map position (1, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901754 Jy ! Component: 100 - total flux cleaned = 0.1431 Jy ! Total flux subtracted in 100 components = 0.1431 Jy ! Clean residual min=-0.064606 max=0.092350 Jy/beam ! Clean residual mean=0.000045 rms=0.013925 Jy/beam ! Combined flux in latest and established models = 1.10145 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 1.10145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.390972Jy sigma=2.322870 ! Fit after self-cal, rms=0.386525Jy sigma=2.304119 ! Inverting map ! Added new window around map position (-7.2, 8.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0855194 Jy ! Component: 100 - total flux cleaned = 0.137885 Jy ! Total flux subtracted in 100 components = 0.137885 Jy ! Clean residual min=-0.057030 max=0.075248 Jy/beam ! Clean residual mean=0.000047 rms=0.012637 Jy/beam ! Combined flux in latest and established models = 1.23933 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 1.23933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.365868Jy sigma=2.155662 ! Fit after self-cal, rms=0.362749Jy sigma=2.142819 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7293 mas, bmaj=1.851 mas, bpa=-0.3432 degrees ! Estimated noise=1.33826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680734 Jy ! Component: 100 - total flux cleaned = 0.106366 Jy ! Component: 150 - total flux cleaned = 0.125354 Jy ! Component: 200 - total flux cleaned = 0.141443 Jy ! Total flux subtracted in 200 components = 0.141443 Jy ! Clean residual min=-0.090378 max=0.094974 Jy/beam ! Clean residual mean=0.000091 rms=0.017940 Jy/beam ! Combined flux in latest and established models = 1.38078 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 1.38078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.348548Jy sigma=2.045853 ! Fit after self-cal, rms=0.346687Jy sigma=2.039327 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7293 x 1.851 at -0.3432 degrees (North through East) ! Clean map min=-0.083005 max=0.71226 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.89 HN 3.23 KP 1.00 ! LA 0.92 MK 0.97 NL 0.97 OV 0.94 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.91 HN 3.30 KP 0.99 ! LA 0.93 MK 0.99 NL 0.97 OV 0.94 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.92 HN 3.32 KP 0.99 ! LA 0.90 MK 0.98 NL 1.00 OV 0.94 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.90 HN 3.33 KP 1.00 ! LA 0.91 MK 0.97 NL 0.96 OV 0.96 ! SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.93 HN 3.33 KP 0.99 ! LA 0.90 MK 0.98 NL 1.03 OV 0.93 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.91 HN 3.32 KP 1.00 ! LA 0.90 MK 0.99 NL 0.96 OV 0.94 ! SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.94 HN 3.02 KP 1.00 ! LA 0.90 MK 0.98 NL 1.01 OV 0.93 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.94 HN 3.14 KP 0.99 ! LA 0.90 MK 0.99 NL 0.98 OV 0.92 ! SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.94 HN 2.93 KP 1.00 ! LA 0.90 MK 0.97 NL 0.99 OV 0.92 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.93 HN 3.09 KP 1.00 ! LA 0.93 MK 0.99 NL 0.99 OV 0.93 ! SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.94 HN 3.13 KP 0.99 ! LA 0.91 MK 0.99 NL 0.93 OV 0.92 ! SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.95 HN 2.97 KP 0.99 ! LA 0.92 MK 1.02 NL 0.98 OV 0.94 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.346687Jy sigma=2.039327 ! Fit after self-cal, rms=0.537087Jy sigma=1.437646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7374 mas, bmaj=1.78 mas, bpa=0.9954 degrees ! Estimated noise=1.50127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.032013 Jy ! Component: 100 - total flux cleaned = -0.0433682 Jy ! Component: 150 - total flux cleaned = -0.0526632 Jy ! Component: 200 - total flux cleaned = -0.0591199 Jy ! Total flux subtracted in 200 components = -0.0591199 Jy ! Clean residual min=-0.041384 max=0.038083 Jy/beam ! Clean residual mean=0.000048 rms=0.008084 Jy/beam ! Combined flux in latest and established models = 1.32166 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 1.32166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.523514Jy sigma=1.337828 ! Fit after self-cal, rms=0.523240Jy sigma=1.328596 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.523240Jy sigma=1.328596 ! Fit after self-cal, rms=0.751088Jy sigma=1.289772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7347 mas, bmaj=1.795 mas, bpa=1.583 degrees ! Estimated noise=1.5157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0270785 Jy ! Component: 100 - total flux cleaned = -0.0375514 Jy ! Component: 150 - total flux cleaned = -0.0474245 Jy ! Component: 200 - total flux cleaned = -0.0549442 Jy ! Total flux subtracted in 200 components = -0.0549442 Jy ! Clean residual min=-0.028598 max=0.026688 Jy/beam ! Clean residual mean=0.000008 rms=0.006320 Jy/beam ! Combined flux in latest and established models = 1.26671 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 76 components and 1.26671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.741425Jy sigma=1.251359 ! Fit after self-cal, rms=0.740844Jy sigma=1.245348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149909 Jy ! Component: 100 - total flux cleaned = -0.0236581 Jy ! Component: 150 - total flux cleaned = -0.028827 Jy ! Component: 200 - total flux cleaned = -0.0327113 Jy ! Total flux subtracted in 200 components = -0.0327113 Jy ! Clean residual min=-0.026835 max=0.026415 Jy/beam ! Clean residual mean=0.000006 rms=0.005902 Jy/beam ! Combined flux in latest and established models = 1.234 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 81 components and 1.234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.735992Jy sigma=1.230949 ! Fit after self-cal, rms=0.735555Jy sigma=1.227770 ! Inverting map ! Added new window around map position (18.2, 34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135798 Jy ! Component: 100 - total flux cleaned = 0.00932021 Jy ! Component: 150 - total flux cleaned = 0.00500517 Jy ! Component: 200 - total flux cleaned = 0.00106588 Jy ! Total flux subtracted in 200 components = 0.00106588 Jy ! Clean residual min=-0.024311 max=0.022218 Jy/beam ! Clean residual mean=0.000013 rms=0.005597 Jy/beam ! Combined flux in latest and established models = 1.23507 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 103 components and 1.23507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.731089Jy sigma=1.215617 ! Fit after self-cal, rms=0.730757Jy sigma=1.213753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.730757Jy sigma=1.213753 ! Fit after self-cal, rms=0.821611Jy sigma=1.212771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7335 mas, bmaj=1.792 mas, bpa=2.043 degrees ! Estimated noise=1.53349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00334809 Jy ! Component: 100 - total flux cleaned = -0.00651835 Jy ! Component: 150 - total flux cleaned = -0.00931074 Jy ! Component: 200 - total flux cleaned = -0.012465 Jy ! Total flux subtracted in 200 components = -0.012465 Jy ! Clean residual min=-0.023846 max=0.021263 Jy/beam ! Clean residual mean=0.000007 rms=0.005396 Jy/beam ! Combined flux in latest and established models = 1.2226 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 108 components and 1.2226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.816715Jy sigma=1.205712 ! Fit after self-cal, rms=0.816469Jy sigma=1.204283 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00548891 Jy ! Component: 100 - total flux cleaned = -0.00847376 Jy ! Component: 150 - total flux cleaned = -0.0107039 Jy ! Component: 200 - total flux cleaned = -0.0122975 Jy ! Total flux subtracted in 200 components = -0.0122975 Jy ! Clean residual min=-0.023707 max=0.020402 Jy/beam ! Clean residual mean=0.000007 rms=0.005276 Jy/beam ! Combined flux in latest and established models = 1.21031 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 124 components and 1.21031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.813617Jy sigma=1.201112 ! Fit after self-cal, rms=0.813483Jy sigma=1.200357 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.813483Jy sigma=1.200357 ! Fit after self-cal, rms=0.861683Jy sigma=1.200547 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=4.175 mas, bpa=7.225 degrees ! Estimated noise=2.18154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0128178 Jy ! Component: 100 - total flux cleaned = -0.0179539 Jy ! Component: 150 - total flux cleaned = -0.0224901 Jy ! Component: 200 - total flux cleaned = -0.0256137 Jy ! Total flux subtracted in 200 components = -0.0256137 Jy ! Clean residual min=-0.024511 max=0.023477 Jy/beam ! Clean residual mean=0.000000 rms=0.006592 Jy/beam ! Combined flux in latest and established models = 1.18469 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 131 components and 1.18469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.859281Jy sigma=1.203806 ! Fit after self-cal, rms=0.859206Jy sigma=1.202848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00459748 Jy ! Component: 100 - total flux cleaned = -0.00695371 Jy ! Component: 150 - total flux cleaned = -0.00869997 Jy ! Component: 200 - total flux cleaned = -0.00994376 Jy ! Total flux subtracted in 200 components = -0.00994376 Jy ! Clean residual min=-0.025360 max=0.024610 Jy/beam ! Clean residual mean=-0.000007 rms=0.006565 Jy/beam ! Combined flux in latest and established models = 1.17475 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 133 components and 1.17475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.857260Jy sigma=1.208012 ! Fit after self-cal, rms=0.857208Jy sigma=1.207377 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7336 mas, bmaj=1.789 mas, bpa=2.389 degrees ! Estimated noise=1.55086 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7336 x 1.789 at 2.389 degrees (North through East) ! Clean map min=-0.037178 max=0.83622 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.857208Jy sigma=1.207377 ! Fit after self-cal, rms=4.960633Jy sigma=0.498675 ! Inverting map and beam ! Estimated beam: bmin=0.733 mas, bmaj=1.788 mas, bpa=1.949 degrees ! Estimated noise=1.53621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00760735 Jy ! Component: 100 - total flux cleaned = -0.00805588 Jy ! Component: 150 - total flux cleaned = -0.00884343 Jy ! Component: 200 - total flux cleaned = -0.0088463 Jy ! Total flux subtracted in 200 components = -0.0088463 Jy ! Clean residual min=-0.013200 max=0.012848 Jy/beam ! Clean residual mean=-0.000003 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 1.1659 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 138 components and 1.1659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=4.960498Jy sigma=0.476655 ! Fit after self-cal, rms=4.960443Jy sigma=0.475457 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112749 Jy ! Component: 100 - total flux cleaned = -0.00111636 Jy ! Component: 150 - total flux cleaned = -0.00111059 Jy ! Component: 200 - total flux cleaned = -0.00110584 Jy ! Total flux subtracted in 200 components = -0.00110584 Jy ! Clean residual min=-0.012392 max=0.012055 Jy/beam ! Clean residual mean=-0.000004 rms=0.002309 Jy/beam ! Combined flux in latest and established models = 1.1648 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 140 components and 1.1648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=4.960276Jy sigma=0.465056 ! Fit after self-cal, rms=4.960154Jy sigma=0.464308 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=4.960154Jy sigma=0.464308 ! Fit after self-cal, rms=2.695812Jy sigma=0.460884 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5794 mas, bmaj=1.505 mas, bpa=2.55 degrees ! Estimated noise=2.14757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.609752 Jy ! Component: 100 - total flux cleaned = 0.829355 Jy ! Component: 150 - total flux cleaned = 0.948701 Jy ! Component: 200 - total flux cleaned = 1.01953 Jy ! Total flux subtracted in 200 components = 1.01953 Jy ! Clean residual min=-0.034298 max=0.042010 Jy/beam ! Clean residual mean=0.000015 rms=0.005286 Jy/beam ! Combined flux in latest and established models = 1.01952 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.01952 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7334 mas, bmaj=1.788 mas, bpa=2.045 degrees ! Estimated noise=1.53663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0614689 Jy ! Component: 100 - total flux cleaned = 0.0978565 Jy ! Component: 150 - total flux cleaned = 0.118332 Jy ! Component: 200 - total flux cleaned = 0.128879 Jy ! Total flux subtracted in 200 components = 0.128879 Jy ! Clean residual min=-0.013138 max=0.016064 Jy/beam ! Clean residual mean=-0.000002 rms=0.002671 Jy/beam ! Combined flux in latest and established models = 1.1484 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 38 components and 1.1484 Jy ! Inverting map ! Added new window around map position (-0.2, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117231 Jy ! Component: 100 - total flux cleaned = 0.0196839 Jy ! Component: 150 - total flux cleaned = 0.0253996 Jy ! Component: 200 - total flux cleaned = 0.0264692 Jy ! Total flux subtracted in 200 components = 0.0264692 Jy ! Clean residual min=-0.010317 max=0.010384 Jy/beam ! Clean residual mean=-0.000007 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 1.17487 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 66 components and 1.17487 Jy ! Inverting map ! Added new window around map position (3.8, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593683 Jy ! Component: 100 - total flux cleaned = 0.00654637 Jy ! Component: 150 - total flux cleaned = 0.00681234 Jy ! Component: 200 - total flux cleaned = 0.0073146 Jy ! Total flux subtracted in 200 components = 0.0073146 Jy ! Clean residual min=-0.009292 max=0.009141 Jy/beam ! Clean residual mean=-0.000004 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 1.18219 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 1.18219 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.014 mas, bmaj=4.137 mas, bpa=6.997 degrees ! Estimated noise=2.17743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275394 Jy ! Component: 100 - total flux cleaned = 0.00139001 Jy ! Component: 150 - total flux cleaned = 0.000349292 Jy ! Component: 200 - total flux cleaned = -0.000133544 Jy ! Total flux subtracted in 200 components = -0.000133544 Jy ! Clean residual min=-0.010399 max=0.008373 Jy/beam ! Clean residual mean=-0.000009 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 1.18205 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000454602 Jy ! Component: 100 - total flux cleaned = -0.000743139 Jy ! Component: 150 - total flux cleaned = -0.00101354 Jy ! Component: 200 - total flux cleaned = -0.00101426 Jy ! Total flux subtracted in 200 components = -0.00101426 Jy ! Clean residual min=-0.010167 max=0.008152 Jy/beam ! Clean residual mean=-0.000010 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 1.18104 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 1.18104 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7334 mas, bmaj=1.788 mas, bpa=2.045 degrees ! Estimated noise=1.53663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107774 Jy ! Component: 100 - total flux cleaned = -0.000394632 Jy ! Component: 150 - total flux cleaned = -0.000183952 Jy ! Component: 200 - total flux cleaned = 1.15844e-05 Jy ! Total flux subtracted in 200 components = 1.15844e-05 Jy ! Clean residual min=-0.009098 max=0.008351 Jy/beam ! Clean residual mean=-0.000004 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 1.18105 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 108 components and 1.18105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=2.695991Jy sigma=0.423761 ! Fit after self-cal, rms=2.694211Jy sigma=0.412300 wmodel J0118-2141_X_c_map.mod ! Writing 108 model components to file: J0118-2141_X_c_map.mod wobs J0118-2141_X_c_uvs.fits ! Writing UV FITS file: J0118-2141_X_c_uvs.fits wwins J0118-2141_X_c_map.win ! wwins: Wrote 7 windows to J0118-2141_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180679 Jy ! Component: 100 - total flux cleaned = -0.00114839 Jy ! Component: 150 - total flux cleaned = -0.000655059 Jy ! Component: 200 - total flux cleaned = -7.29786e-05 Jy ! Component: 250 - total flux cleaned = 0.000145323 Jy ! Component: 300 - total flux cleaned = 0.00057195 Jy ! Component: 350 - total flux cleaned = 0.000777436 Jy ! Component: 400 - total flux cleaned = 0.000876478 Jy ! Component: 450 - total flux cleaned = 0.00107256 Jy ! Component: 500 - total flux cleaned = 0.000885746 Jy ! Component: 550 - total flux cleaned = 0.000979177 Jy ! Component: 600 - total flux cleaned = 0.00115904 Jy ! Component: 650 - total flux cleaned = 0.00124509 Jy ! Component: 700 - total flux cleaned = 0.0013298 Jy ! Component: 750 - total flux cleaned = 0.00141359 Jy ! Component: 800 - total flux cleaned = 0.00174434 Jy ! Component: 850 - total flux cleaned = 0.00182394 Jy ! Component: 900 - total flux cleaned = 0.00182317 Jy ! Component: 950 - total flux cleaned = 0.00182372 Jy ! Component: 1000 - total flux cleaned = 0.00205296 Jy ! Component: 1050 - total flux cleaned = 0.00227551 Jy ! Component: 1100 - total flux cleaned = 0.0022008 Jy ! Component: 1150 - total flux cleaned = 0.00263691 Jy ! Component: 1200 - total flux cleaned = 0.00292324 Jy ! Component: 1250 - total flux cleaned = 0.00306435 Jy ! Component: 1300 - total flux cleaned = 0.00348108 Jy ! Component: 1350 - total flux cleaned = 0.00368566 Jy ! Component: 1400 - total flux cleaned = 0.00395568 Jy ! Component: 1450 - total flux cleaned = 0.00422067 Jy ! Component: 1500 - total flux cleaned = 0.00441773 Jy ! Component: 1550 - total flux cleaned = 0.00474101 Jy ! Component: 1600 - total flux cleaned = 0.00499699 Jy ! Component: 1650 - total flux cleaned = 0.00531078 Jy ! Component: 1700 - total flux cleaned = 0.00543394 Jy ! Component: 1750 - total flux cleaned = 0.00561702 Jy ! Component: 1800 - total flux cleaned = 0.00567763 Jy ! Component: 1850 - total flux cleaned = 0.00597637 Jy ! Component: 1900 - total flux cleaned = 0.00615444 Jy ! Component: 1950 - total flux cleaned = 0.00609616 Jy ! Component: 2000 - total flux cleaned = 0.00655855 Jy ! Component: 2050 - total flux cleaned = 0.00678765 Jy ! Component: 2100 - total flux cleaned = 0.00684529 Jy ! Component: 2150 - total flux cleaned = 0.00718042 Jy ! Component: 2200 - total flux cleaned = 0.0072912 Jy ! Component: 2250 - total flux cleaned = 0.00745428 Jy ! Component: 2300 - total flux cleaned = 0.00761661 Jy ! Component: 2350 - total flux cleaned = 0.00766959 Jy ! Component: 2400 - total flux cleaned = 0.00777568 Jy ! Component: 2450 - total flux cleaned = 0.00782802 Jy ! Component: 2500 - total flux cleaned = 0.00819169 Jy ! Component: 2550 - total flux cleaned = 0.00824351 Jy ! Component: 2600 - total flux cleaned = 0.00849762 Jy ! Component: 2650 - total flux cleaned = 0.00864764 Jy ! Component: 2700 - total flux cleaned = 0.00854765 Jy ! Component: 2750 - total flux cleaned = 0.00884356 Jy ! Component: 2800 - total flux cleaned = 0.00889209 Jy ! Component: 2850 - total flux cleaned = 0.00898807 Jy ! Component: 2900 - total flux cleaned = 0.00884482 Jy ! Component: 2950 - total flux cleaned = 0.00908149 Jy ! Component: 3000 - total flux cleaned = 0.00912821 Jy ! Component: 3050 - total flux cleaned = 0.00917406 Jy ! Component: 3100 - total flux cleaned = 0.00908154 Jy ! Component: 3150 - total flux cleaned = 0.00926378 Jy ! Component: 3200 - total flux cleaned = 0.00912796 Jy ! Component: 3250 - total flux cleaned = 0.0091283 Jy ! Component: 3300 - total flux cleaned = 0.00912872 Jy ! Component: 3350 - total flux cleaned = 0.00943821 Jy ! Component: 3400 - total flux cleaned = 0.00939427 Jy ! Component: 3450 - total flux cleaned = 0.00965491 Jy ! Component: 3500 - total flux cleaned = 0.00952541 Jy ! Component: 3550 - total flux cleaned = 0.00961098 Jy ! Component: 3600 - total flux cleaned = 0.00956892 Jy ! Component: 3650 - total flux cleaned = 0.00961056 Jy ! Component: 3700 - total flux cleaned = 0.0094433 Jy ! Component: 3750 - total flux cleaned = 0.00965134 Jy ! Component: 3800 - total flux cleaned = 0.00956836 Jy ! Component: 3850 - total flux cleaned = 0.00960908 Jy ! Component: 3900 - total flux cleaned = 0.00977094 Jy ! Component: 3950 - total flux cleaned = 0.0097706 Jy ! Component: 4000 - total flux cleaned = 0.00977066 Jy ! Component: 4050 - total flux cleaned = 0.00989022 Jy ! Total flux subtracted in 4096 components = 0.00992936 Jy ! Clean residual min=-0.002443 max=0.002377 Jy/beam ! Clean residual mean=-0.000001 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 1.19098 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 411 components and 1.19098 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0118-2141_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7334 x 1.788 at 2.045 degrees (North through East) ! Clean map min=-0.010496 max=0.85333 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0118-2141_X_c_map.fits wmodel /image_prod/ug002_uva//J0118-2141_X_c_map.mod ! Writing 411 model components to file: /image_prod/ug002_uva//J0118-2141_X_c_map.mod wobs /image_prod/ug002_uva//J0118-2141_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0118-2141_X_c_uvs.fits wwins /image_prod/ug002_uva//J0118-2141_X_c_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J0118-2141_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.853331 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00066746 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234654 0.234654 0.469309 0.938617 1.87723 3.75447 7.50894 15.0179 30.0358 60.0715 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.853 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1278.48 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0118-2141_X_c_dfm.log closed on Wed Mar 4 18:58:25 2020