! Started logfile: /image_prod/ug002_uva//J0113+1324_X_dfm.log on Wed Mar 4 18:55:10 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0113+1324_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0113+1324_X_uva.fits ! AN table 1: 25 integrations on 28 of 28 possible baselines. ! AN table 2: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.908 visibilities/baseline/integration-bin. ! Found source: J0113+1324 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 27240 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0113+1324_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.005384Jy sigma=9.469596 ! Fit after self-cal, rms=0.907440Jy sigma=8.538248 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6438 mas, bmaj=1.593 mas, bpa=-3.297 degrees ! Estimated noise=0.969308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070384 Jy ! Component: 100 - total flux cleaned = 0.086986 Jy ! Total flux subtracted in 100 components = 0.086986 Jy ! Clean residual min=-0.003759 max=0.006630 Jy/beam ! Clean residual mean=-0.000005 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.086986 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.086986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055947Jy sigma=0.489054 ! Fit after self-cal, rms=0.055900Jy sigma=0.488680 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711483 Jy ! Component: 100 - total flux cleaned = 0.0106782 Jy ! Total flux subtracted in 100 components = 0.0106782 Jy ! Clean residual min=-0.003289 max=0.004854 Jy/beam ! Clean residual mean=-0.000005 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.0976642 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 6 components and 0.0976642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054638Jy sigma=0.474678 ! Fit after self-cal, rms=0.054639Jy sigma=0.474601 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8123 mas, bmaj=1.858 mas, bpa=-2.747 degrees ! Estimated noise=0.464036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00592011 Jy ! Component: 100 - total flux cleaned = 0.00874732 Jy ! Component: 150 - total flux cleaned = 0.0103177 Jy ! Component: 200 - total flux cleaned = 0.0106596 Jy ! Total flux subtracted in 200 components = 0.0106596 Jy ! Clean residual min=-0.003175 max=0.006199 Jy/beam ! Clean residual mean=-0.000008 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.108324 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.108324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054020Jy sigma=0.468185 ! Fit after self-cal, rms=0.053972Jy sigma=0.467651 ! Inverting map ! Added new window around map position (6.6, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560709 Jy ! Component: 100 - total flux cleaned = 0.00878036 Jy ! Component: 150 - total flux cleaned = 0.0111776 Jy ! Component: 200 - total flux cleaned = 0.0131016 Jy ! Total flux subtracted in 200 components = 0.0131016 Jy ! Clean residual min=-0.002417 max=0.002982 Jy/beam ! Clean residual mean=-0.000004 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.121425 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 64 components and 0.121425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053373Jy sigma=0.460439 ! Fit after self-cal, rms=0.053328Jy sigma=0.460061 ! Inverting map ! Added new window around map position (4.8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027118 Jy ! Component: 100 - total flux cleaned = 0.00428608 Jy ! Component: 150 - total flux cleaned = 0.00547205 Jy ! Component: 200 - total flux cleaned = 0.00627458 Jy ! Total flux subtracted in 200 components = 0.00627458 Jy ! Clean residual min=-0.002056 max=0.002432 Jy/beam ! Clean residual mean=-0.000003 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.1277 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.1277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053163Jy sigma=0.458214 ! Fit after self-cal, rms=0.053151Jy sigma=0.458128 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8123 x 1.858 at -2.747 degrees (North through East) ! Clean map min=-0.0018856 max=0.09342 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.93 KP 1.01 LA 1.02 ! MK 0.98 NL 1.12 OV 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 1.05 KP 1.05 ! LA 1.01 MK 0.98 OV 0.93 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.90 KP 1.05 LA 1.04 ! MK 1.00 NL 1.09 OV 0.92 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.02 KP 1.05 ! LA 1.03 MK 1.00 OV 0.93 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.91 KP 1.05 LA 1.03 ! MK 0.99 NL 1.08 OV 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.01 KP 1.04 ! LA 1.03 MK 1.04 OV 0.93 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.89 KP 1.04 LA 0.97 ! MK 0.98 NL 1.17 OV 0.95 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.02 KP 1.06 ! LA 1.02 MK 1.01 OV 0.91 PT 0.91 ! SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.94 KP 1.02 LA 1.00 ! MK 1.02 NL 1.11 OV 0.94 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.03 KP 1.04 ! LA 1.04 MK 1.04 OV 0.91 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.89 KP 1.02 LA 1.07 ! MK 0.96 NL 1.07 OV 0.90 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 1.05 KP 1.03 ! LA 1.01 MK 1.01 OV 0.91 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.91 KP 1.05 LA 1.01 ! MK 0.99 NL 1.12 OV 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 HN 1.02 KP 1.08 ! LA 1.00 MK 1.04 OV 0.91 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.95 KP 1.02 LA 1.07 ! MK 0.95 NL 1.13 OV 0.89 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.04 HN 0.99 KP 1.02 ! LA 1.02 MK 1.03 OV 0.91 PT 0.90 ! SC 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.95 KP 1.00 LA 1.04 ! MK 0.97 NL 1.11 OV 0.93 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.05 KP 1.02 ! LA 1.01 MK 1.00 OV 0.92 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.91 KP 1.01 LA 1.07 ! MK 1.04 NL 1.06 OV 0.93 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 1.03 KP 0.98 ! LA 1.08 MK 1.03 OV 0.92 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.97 KP 1.02 LA 1.03 ! MK 0.94 NL 1.11 OV 0.93 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 HN 1.08 KP 0.99 ! LA 1.06 MK 1.04 OV 0.90 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.93 KP 1.00 LA 1.03 ! MK 0.94 NL 1.09 OV 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.04 KP 1.01 ! LA 1.03 MK 1.03 OV 0.95 PT 0.90 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.053151Jy sigma=0.458128 ! Fit after self-cal, rms=0.052480Jy sigma=0.453569 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8133 mas, bmaj=1.858 mas, bpa=-2.589 degrees ! Estimated noise=0.461428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416697 Jy ! Component: 100 - total flux cleaned = 0.000510898 Jy ! Component: 150 - total flux cleaned = 0.00072663 Jy ! Component: 200 - total flux cleaned = 0.00085385 Jy ! Total flux subtracted in 200 components = 0.00085385 Jy ! Clean residual min=-0.001056 max=0.001532 Jy/beam ! Clean residual mean=-0.000000 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.128554 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 103 components and 0.128554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052392Jy sigma=0.452931 ! Fit after self-cal, rms=0.052406Jy sigma=0.452814 ! Inverting map ! Added new window around map position (-9.6, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000845871 Jy ! Component: 100 - total flux cleaned = 0.000778552 Jy ! Component: 150 - total flux cleaned = 0.000893412 Jy ! Component: 200 - total flux cleaned = 0.000970091 Jy ! Total flux subtracted in 200 components = 0.000970091 Jy ! Clean residual min=-0.001075 max=0.001373 Jy/beam ! Clean residual mean=-0.000000 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.129524 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 117 components and 0.129524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052353Jy sigma=0.452442 ! Fit after self-cal, rms=0.052350Jy sigma=0.452429 ! Inverting map ! Added new window around map position (0.2, -35.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484645 Jy ! Component: 100 - total flux cleaned = 0.000380915 Jy ! Component: 150 - total flux cleaned = 0.000404498 Jy ! Component: 200 - total flux cleaned = 0.000449441 Jy ! Total flux subtracted in 200 components = 0.000449441 Jy ! Clean residual min=-0.001088 max=0.001207 Jy/beam ! Clean residual mean=-0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.129973 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 138 components and 0.129973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052309Jy sigma=0.452147 ! Fit after self-cal, rms=0.052308Jy sigma=0.452128 ! Inverting map ! Added new window around map position (8.2, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00097578 Jy ! Component: 100 - total flux cleaned = 0.00134976 Jy ! Component: 150 - total flux cleaned = 0.00159317 Jy ! Component: 200 - total flux cleaned = 0.00175787 Jy ! Total flux subtracted in 200 components = 0.00175787 Jy ! Clean residual min=-0.000999 max=0.000967 Jy/beam ! Clean residual mean=-0.000000 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.131731 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 162 components and 0.131731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052277Jy sigma=0.451881 ! Fit after self-cal, rms=0.052275Jy sigma=0.451870 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052275Jy sigma=0.451870 ! Fit after self-cal, rms=0.052396Jy sigma=0.450988 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8143 mas, bmaj=1.856 mas, bpa=-2.683 degrees ! Estimated noise=0.460709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330063 Jy ! Component: 100 - total flux cleaned = 0.000603961 Jy ! Component: 150 - total flux cleaned = 0.000770368 Jy ! Component: 200 - total flux cleaned = 0.000889154 Jy ! Total flux subtracted in 200 components = 0.000889154 Jy ! Clean residual min=-0.000751 max=0.000847 Jy/beam ! Clean residual mean=-0.000000 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.132621 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 188 components and 0.132621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052381Jy sigma=0.450860 ! Fit after self-cal, rms=0.052386Jy sigma=0.450845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.6, 47.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470286 Jy ! Component: 100 - total flux cleaned = 0.000582608 Jy ! Component: 150 - total flux cleaned = 0.000665191 Jy ! Component: 200 - total flux cleaned = 0.000665229 Jy ! Total flux subtracted in 200 components = 0.000665229 Jy ! Clean residual min=-0.000755 max=0.000734 Jy/beam ! Clean residual mean=0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.133286 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 208 components and 0.133286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052370Jy sigma=0.450697 ! Fit after self-cal, rms=0.052370Jy sigma=0.450688 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052370Jy sigma=0.450688 ! Fit after self-cal, rms=0.052407Jy sigma=0.450675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8144 mas, bmaj=1.856 mas, bpa=-2.665 degrees ! Estimated noise=0.460952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194062 Jy ! Component: 100 - total flux cleaned = 0.000316623 Jy ! Component: 150 - total flux cleaned = 0.000374133 Jy ! Component: 200 - total flux cleaned = 0.000401582 Jy ! Total flux subtracted in 200 components = 0.000401582 Jy ! Clean residual min=-0.000727 max=0.000742 Jy/beam ! Clean residual mean=-0.000000 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.133687 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 216 components and 0.133687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052398Jy sigma=0.450602 ! Fit after self-cal, rms=0.052399Jy sigma=0.450601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.6, -43.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035066 Jy ! Component: 100 - total flux cleaned = 0.000289452 Jy ! Component: 150 - total flux cleaned = 0.000255963 Jy ! Component: 200 - total flux cleaned = 0.000299768 Jy ! Total flux subtracted in 200 components = 0.000299768 Jy ! Clean residual min=-0.000717 max=0.000687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.133987 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 234 components and 0.133987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052382Jy sigma=0.450477 ! Fit after self-cal, rms=0.052382Jy sigma=0.450472 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052382Jy sigma=0.450472 ! Fit after self-cal, rms=0.052330Jy sigma=0.450465 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.09 mas, bmaj=2.841 mas, bpa=3.177 degrees ! Estimated noise=0.59223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224751 Jy ! Component: 100 - total flux cleaned = 0.000246651 Jy ! Component: 150 - total flux cleaned = 0.000267806 Jy ! Component: 200 - total flux cleaned = 0.000277787 Jy ! Total flux subtracted in 200 components = 0.000277787 Jy ! Clean residual min=-0.000678 max=0.000668 Jy/beam ! Clean residual mean=-0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.134265 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 259 components and 0.134265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052328Jy sigma=0.450442 ! Fit after self-cal, rms=0.052327Jy sigma=0.450440 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.22509e-05 Jy ! Component: 100 - total flux cleaned = 8.85109e-05 Jy ! Component: 150 - total flux cleaned = 0.000105625 Jy ! Component: 200 - total flux cleaned = 0.000105469 Jy ! Total flux subtracted in 200 components = 0.000105469 Jy ! Clean residual min=-0.000676 max=0.000670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.134371 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 272 components and 0.134371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052325Jy sigma=0.450428 ! Fit after self-cal, rms=0.052325Jy sigma=0.450427 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8142 mas, bmaj=1.856 mas, bpa=-2.684 degrees ! Estimated noise=0.460743 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8142 x 1.856 at -2.684 degrees (North through East) ! Clean map min=-0.00086287 max=0.092885 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6441 mas, bmaj=1.589 mas, bpa=-3.319 degrees ! Estimated noise=0.965856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.06999 Jy ! Component: 100 - total flux cleaned = 0.0869529 Jy ! Component: 150 - total flux cleaned = 0.0945022 Jy ! Component: 200 - total flux cleaned = 0.099525 Jy ! Total flux subtracted in 200 components = 0.099525 Jy ! Clean residual min=-0.003220 max=0.003063 Jy/beam ! Clean residual mean=-0.000003 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.099525 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.099525 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8142 mas, bmaj=1.856 mas, bpa=-2.684 degrees ! Estimated noise=0.460743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597737 Jy ! Component: 100 - total flux cleaned = 0.0103834 Jy ! Component: 150 - total flux cleaned = 0.0138242 Jy ! Component: 200 - total flux cleaned = 0.0165617 Jy ! Total flux subtracted in 200 components = 0.0165617 Jy ! Clean residual min=-0.001521 max=0.001682 Jy/beam ! Clean residual mean=-0.000003 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.116087 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.116087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.09 mas, bmaj=2.841 mas, bpa=3.177 degrees ! Estimated noise=0.59223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408574 Jy ! Component: 100 - total flux cleaned = 0.0068356 Jy ! Component: 150 - total flux cleaned = 0.00883298 Jy ! Component: 200 - total flux cleaned = 0.0103463 Jy ! Total flux subtracted in 200 components = 0.0103463 Jy ! Clean residual min=-0.001047 max=0.001224 Jy/beam ! Clean residual mean=-0.000002 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.126433 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120923 Jy ! Component: 100 - total flux cleaned = 0.00220701 Jy ! Component: 150 - total flux cleaned = 0.00304026 Jy ! Component: 200 - total flux cleaned = 0.00374364 Jy ! Total flux subtracted in 200 components = 0.00374364 Jy ! Clean residual min=-0.000820 max=0.000741 Jy/beam ! Clean residual mean=-0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.130177 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 125 components and 0.130177 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8142 mas, bmaj=1.856 mas, bpa=-2.684 degrees ! Estimated noise=0.460743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857693 Jy ! Component: 100 - total flux cleaned = 0.00128002 Jy ! Component: 150 - total flux cleaned = 0.00159404 Jy ! Component: 200 - total flux cleaned = 0.00185018 Jy ! Total flux subtracted in 200 components = 0.00185018 Jy ! Clean residual min=-0.000765 max=0.000775 Jy/beam ! Clean residual mean=-0.000000 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.132027 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 151 components and 0.132027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052397Jy sigma=0.451003 ! Fit after self-cal, rms=0.052384Jy sigma=0.450889 wmodel J0113+1324_X_map.mod ! Writing 151 model components to file: J0113+1324_X_map.mod wobs J0113+1324_X_uvs.fits ! Writing UV FITS file: J0113+1324_X_uvs.fits wwins J0113+1324_X_map.win ! wwins: Wrote 10 windows to J0113+1324_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.82214e-05 Jy ! Component: 100 - total flux cleaned = -1.48759e-05 Jy ! Component: 150 - total flux cleaned = 4.95445e-05 Jy ! Component: 200 - total flux cleaned = 4.92539e-05 Jy ! Component: 250 - total flux cleaned = 3.67357e-05 Jy ! Component: 300 - total flux cleaned = 7.2606e-05 Jy ! Component: 350 - total flux cleaned = 0.000143085 Jy ! Component: 400 - total flux cleaned = 0.00016627 Jy ! Component: 450 - total flux cleaned = 0.000245833 Jy ! Component: 500 - total flux cleaned = 0.000268063 Jy ! Component: 550 - total flux cleaned = 0.000289899 Jy ! Component: 600 - total flux cleaned = 0.000343792 Jy ! Component: 650 - total flux cleaned = 0.000354257 Jy ! Component: 700 - total flux cleaned = 0.000354085 Jy ! Component: 750 - total flux cleaned = 0.000343816 Jy ! Component: 800 - total flux cleaned = 0.000354074 Jy ! Component: 850 - total flux cleaned = 0.000374543 Jy ! Component: 900 - total flux cleaned = 0.000374769 Jy ! Component: 950 - total flux cleaned = 0.000424398 Jy ! Component: 1000 - total flux cleaned = 0.000375223 Jy ! Component: 1050 - total flux cleaned = 0.000404596 Jy ! Component: 1100 - total flux cleaned = 0.000452901 Jy ! Component: 1150 - total flux cleaned = 0.000443373 Jy ! Component: 1200 - total flux cleaned = 0.000471803 Jy ! Component: 1250 - total flux cleaned = 0.000481265 Jy ! Component: 1300 - total flux cleaned = 0.000518379 Jy ! Component: 1350 - total flux cleaned = 0.000555166 Jy ! Component: 1400 - total flux cleaned = 0.000582484 Jy ! Component: 1450 - total flux cleaned = 0.000564487 Jy ! Component: 1500 - total flux cleaned = 0.00055573 Jy ! Component: 1550 - total flux cleaned = 0.000626959 Jy ! Component: 1600 - total flux cleaned = 0.000662214 Jy ! Component: 1650 - total flux cleaned = 0.00063599 Jy ! Component: 1700 - total flux cleaned = 0.000662055 Jy ! Component: 1750 - total flux cleaned = 0.000662 Jy ! Component: 1800 - total flux cleaned = 0.000644933 Jy ! Component: 1850 - total flux cleaned = 0.000661829 Jy ! Component: 1900 - total flux cleaned = 0.000644902 Jy ! Component: 1950 - total flux cleaned = 0.000636556 Jy ! Component: 2000 - total flux cleaned = 0.000644921 Jy ! Component: 2050 - total flux cleaned = 0.00065315 Jy ! Component: 2100 - total flux cleaned = 0.000620482 Jy ! Component: 2150 - total flux cleaned = 0.000620469 Jy ! Component: 2200 - total flux cleaned = 0.000644546 Jy ! Component: 2250 - total flux cleaned = 0.000604655 Jy ! Component: 2300 - total flux cleaned = 0.000628387 Jy ! Component: 2350 - total flux cleaned = 0.000573228 Jy ! Component: 2400 - total flux cleaned = 0.000573199 Jy ! Component: 2450 - total flux cleaned = 0.000565441 Jy ! Component: 2500 - total flux cleaned = 0.000534604 Jy ! Component: 2550 - total flux cleaned = 0.000526938 Jy ! Component: 2600 - total flux cleaned = 0.000542134 Jy ! Component: 2650 - total flux cleaned = 0.000519405 Jy ! Component: 2700 - total flux cleaned = 0.000496938 Jy ! Component: 2750 - total flux cleaned = 0.000526774 Jy ! Component: 2800 - total flux cleaned = 0.000504547 Jy ! Component: 2850 - total flux cleaned = 0.000497189 Jy ! Component: 2900 - total flux cleaned = 0.000497271 Jy ! Component: 2950 - total flux cleaned = 0.000460921 Jy ! Component: 3000 - total flux cleaned = 0.000482651 Jy ! Component: 3050 - total flux cleaned = 0.000461164 Jy ! Component: 3100 - total flux cleaned = 0.000489666 Jy ! Component: 3150 - total flux cleaned = 0.000468412 Jy ! Component: 3200 - total flux cleaned = 0.00045433 Jy ! Component: 3250 - total flux cleaned = 0.00046137 Jy ! Component: 3300 - total flux cleaned = 0.00042661 Jy ! Component: 3350 - total flux cleaned = 0.000405862 Jy ! Component: 3400 - total flux cleaned = 0.000426471 Jy ! Component: 3450 - total flux cleaned = 0.000440149 Jy ! Component: 3500 - total flux cleaned = 0.000399421 Jy ! Component: 3550 - total flux cleaned = 0.000412955 Jy ! Component: 3600 - total flux cleaned = 0.000399447 Jy ! Component: 3650 - total flux cleaned = 0.000399386 Jy ! Component: 3700 - total flux cleaned = 0.000399378 Jy ! Component: 3750 - total flux cleaned = 0.000366294 Jy ! Component: 3800 - total flux cleaned = 0.000379454 Jy ! Component: 3850 - total flux cleaned = 0.00035984 Jy ! Component: 3900 - total flux cleaned = 0.000353369 Jy ! Component: 3950 - total flux cleaned = 0.000327435 Jy ! Component: 4000 - total flux cleaned = 0.000314612 Jy ! Component: 4050 - total flux cleaned = 0.000314558 Jy ! Total flux subtracted in 4096 components = 0.000314498 Jy ! Clean residual min=-0.000494 max=0.000379 Jy/beam ! Clean residual mean=-0.000000 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.132341 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 461 components and 0.132341 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0113+1324_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8142 x 1.856 at -2.684 degrees (North through East) ! Clean map min=-0.00055548 max=0.092636 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0113+1324_X_map.fits wmodel /image_prod/ug002_uva//J0113+1324_X_map.mod ! Writing 461 model components to file: /image_prod/ug002_uva//J0113+1324_X_map.mod wobs /image_prod/ug002_uva//J0113+1324_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0113+1324_X_uvs.fits wwins /image_prod/ug002_uva//J0113+1324_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0113+1324_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0926356 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000109687 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.355222 0.355222 0.710443 1.42089 2.84177 5.68355 11.3671 22.7342 45.4684 90.9367 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.092 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 844.543 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0113+1324_X_dfm.log closed on Wed Mar 4 18:55:16 2020