! Started logfile: /image_prod/ug002_uva//J0110-1648_S_dfm.log on Wed Mar 4 18:53:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J0110-1648_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0110-1648_S_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.996667 visibilities/baseline/integration-bin. ! Found source: J0110-1648 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5382 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0110-1648_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.001698Jy sigma=6.579508 ! Fit after self-cal, rms=0.932581Jy sigma=6.112222 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.579 mas, bpa=-3.863 degrees ! Estimated noise=2.11213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533725 Jy ! Component: 100 - total flux cleaned = 0.0682652 Jy ! Total flux subtracted in 100 components = 0.0682652 Jy ! Clean residual min=-0.005147 max=0.006540 Jy/beam ! Clean residual mean=-0.000022 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.0682652 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0682652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077722Jy sigma=0.478671 ! Fit after self-cal, rms=0.077291Jy sigma=0.475846 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=7.518 mas, bpa=-3.892 degrees ! Estimated noise=1.50424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819144 Jy ! Component: 100 - total flux cleaned = 0.0119794 Jy ! Component: 150 - total flux cleaned = 0.014066 Jy ! Component: 200 - total flux cleaned = 0.0152457 Jy ! Total flux subtracted in 200 components = 0.0152457 Jy ! Clean residual min=-0.004151 max=0.004929 Jy/beam ! Clean residual mean=-0.000024 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.0835109 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.0835109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076618Jy sigma=0.469606 ! Fit after self-cal, rms=0.076612Jy sigma=0.469404 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.075 x 7.518 at -3.892 degrees (North through East) ! Clean map min=-0.0042003 max=0.0697 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 1.08 KP 0.93 ! LA 1.07 MK 1.15 NL 0.97 OV 0.94 ! SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 0.82 HN 1.10 KP 1.00 ! LA 0.96 MK 0.99 NL 1.03 OV 0.92 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 0.85 HN 1.17 KP 1.00 ! LA 1.03 MK 0.95 NL 1.00 OV 1.05 ! SC 0.88 ! ! ! Fit before self-cal, rms=0.076612Jy sigma=0.469404 ! Fit after self-cal, rms=0.080818Jy sigma=0.464524 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=7.557 mas, bpa=-3.079 degrees ! Estimated noise=1.51066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502849 Jy ! Component: 100 - total flux cleaned = 0.000558956 Jy ! Component: 150 - total flux cleaned = 0.000583885 Jy ! Component: 200 - total flux cleaned = 0.000625235 Jy ! Total flux subtracted in 200 components = 0.000625235 Jy ! Clean residual min=-0.003797 max=0.003427 Jy/beam ! Clean residual mean=-0.000010 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0841361 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0841361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080799Jy sigma=0.464406 ! Fit after self-cal, rms=0.081066Jy sigma=0.464058 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.081066Jy sigma=0.464058 ! Fit after self-cal, rms=0.085233Jy sigma=0.460104 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=7.667 mas, bpa=-2.793 degrees ! Estimated noise=1.51596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.45068e-05 Jy ! Component: 100 - total flux cleaned = -2.64838e-05 Jy ! Component: 150 - total flux cleaned = 2.98523e-06 Jy ! Component: 200 - total flux cleaned = 2.78958e-05 Jy ! Total flux subtracted in 200 components = 2.78958e-05 Jy ! Clean residual min=-0.002412 max=0.002284 Jy/beam ! Clean residual mean=-0.000000 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.084164 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.084164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085212Jy sigma=0.459926 ! Fit after self-cal, rms=0.085318Jy sigma=0.459716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.761e-05 Jy ! Component: 100 - total flux cleaned = 6.79121e-05 Jy ! Component: 150 - total flux cleaned = 8.68185e-05 Jy ! Component: 200 - total flux cleaned = 0.000120692 Jy ! Total flux subtracted in 200 components = 0.000120692 Jy ! Clean residual min=-0.002433 max=0.002240 Jy/beam ! Clean residual mean=-0.000001 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0842847 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.0842847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085310Jy sigma=0.459640 ! Fit after self-cal, rms=0.085306Jy sigma=0.459632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085306Jy sigma=0.459632 ! Fit after self-cal, rms=0.086165Jy sigma=0.459584 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.702 mas, bpa=-2.771 degrees ! Estimated noise=1.51641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116103 Jy ! Component: 100 - total flux cleaned = 0.00011514 Jy ! Component: 150 - total flux cleaned = 0.000154308 Jy ! Component: 200 - total flux cleaned = 0.000172179 Jy ! Total flux subtracted in 200 components = 0.000172179 Jy ! Clean residual min=-0.002344 max=0.002250 Jy/beam ! Clean residual mean=-0.000000 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0844569 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0844569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086156Jy sigma=0.459508 ! Fit after self-cal, rms=0.086165Jy sigma=0.459499 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.55686e-05 Jy ! Component: 100 - total flux cleaned = 7.58087e-05 Jy ! Component: 150 - total flux cleaned = 7.53448e-05 Jy ! Component: 200 - total flux cleaned = 7.47207e-05 Jy ! Total flux subtracted in 200 components = 7.47207e-05 Jy ! Clean residual min=-0.002348 max=0.002267 Jy/beam ! Clean residual mean=-0.000000 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0845316 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.0845316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086160Jy sigma=0.459459 ! Fit after self-cal, rms=0.086156Jy sigma=0.459455 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086156Jy sigma=0.459455 ! Fit after self-cal, rms=0.086488Jy sigma=0.459438 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.118 mas, bmaj=14.21 mas, bpa=0.1394 degrees ! Estimated noise=1.92124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529929 Jy ! Component: 100 - total flux cleaned = 0.000509095 Jy ! Component: 150 - total flux cleaned = 0.000492079 Jy ! Component: 200 - total flux cleaned = 0.000456475 Jy ! Total flux subtracted in 200 components = 0.000456475 Jy ! Clean residual min=-0.002692 max=0.002561 Jy/beam ! Clean residual mean=0.000003 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.0849881 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.0849881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086489Jy sigma=0.459500 ! Fit after self-cal, rms=0.086483Jy sigma=0.459450 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.203e-06 Jy ! Component: 100 - total flux cleaned = -3.41571e-05 Jy ! Component: 150 - total flux cleaned = -6.18104e-05 Jy ! Component: 200 - total flux cleaned = -8.21089e-05 Jy ! Total flux subtracted in 200 components = -8.21089e-05 Jy ! Clean residual min=-0.002694 max=0.002541 Jy/beam ! Clean residual mean=0.000002 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.084906 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.084906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086484Jy sigma=0.459499 ! Fit after self-cal, rms=0.086477Jy sigma=0.459464 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.722 mas, bpa=-2.772 degrees ! Estimated noise=1.51626 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 7.722 at -2.772 degrees (North through East) ! Clean map min=-0.0022576 max=0.06979 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=6.774 mas, bpa=-2.259 degrees ! Estimated noise=2.13217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536687 Jy ! Component: 100 - total flux cleaned = 0.0695396 Jy ! Component: 150 - total flux cleaned = 0.07692 Jy ! Component: 200 - total flux cleaned = 0.0808301 Jy ! Total flux subtracted in 200 components = 0.0808301 Jy ! Clean residual min=-0.003598 max=0.003694 Jy/beam ! Clean residual mean=-0.000003 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.0808301 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0808301 Jy ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.722 mas, bpa=-2.772 degrees ! Estimated noise=1.51626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210787 Jy ! Component: 100 - total flux cleaned = 0.00251979 Jy ! Component: 150 - total flux cleaned = 0.00278722 Jy ! Component: 200 - total flux cleaned = 0.00293292 Jy ! Total flux subtracted in 200 components = 0.00293292 Jy ! Clean residual min=-0.002390 max=0.002343 Jy/beam ! Clean residual mean=-0.000001 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.083763 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 42 components and 0.083763 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.118 mas, bmaj=14.21 mas, bpa=0.1394 degrees ! Estimated noise=1.92124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000911626 Jy ! Component: 100 - total flux cleaned = 0.000906594 Jy ! Component: 150 - total flux cleaned = 0.000919771 Jy ! Component: 200 - total flux cleaned = 0.000940556 Jy ! Total flux subtracted in 200 components = 0.000940556 Jy ! Clean residual min=-0.002693 max=0.002514 Jy/beam ! Clean residual mean=0.000002 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0847036 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.38644e-06 Jy ! Component: 100 - total flux cleaned = 8.44528e-06 Jy ! Component: 150 - total flux cleaned = 7.85086e-06 Jy ! Component: 200 - total flux cleaned = 7.97752e-06 Jy ! Total flux subtracted in 200 components = 7.97752e-06 Jy ! Clean residual min=-0.002674 max=0.002523 Jy/beam ! Clean residual mean=0.000002 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.0847115 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.0847116 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=7.722 mas, bpa=-2.772 degrees ! Estimated noise=1.51626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003587 Jy ! Component: 100 - total flux cleaned = -0.000301128 Jy ! Component: 150 - total flux cleaned = -0.000252927 Jy ! Component: 200 - total flux cleaned = -0.000210912 Jy ! Total flux subtracted in 200 components = -0.000210912 Jy ! Clean residual min=-0.002353 max=0.002315 Jy/beam ! Clean residual mean=-0.000000 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0845006 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.0845006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086480Jy sigma=0.459422 ! Fit after self-cal, rms=0.086463Jy sigma=0.459398 wmodel J0110-1648_S_map.mod ! Writing 55 model components to file: J0110-1648_S_map.mod wobs J0110-1648_S_uvs.fits ! Writing UV FITS file: J0110-1648_S_uvs.fits wwins J0110-1648_S_map.win ! wwins: Wrote 1 windows to J0110-1648_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215491 Jy ! Component: 100 - total flux cleaned = -0.000218458 Jy ! Component: 150 - total flux cleaned = -0.000104677 Jy ! Component: 200 - total flux cleaned = -0.000141656 Jy ! Component: 250 - total flux cleaned = -0.000282674 Jy ! Component: 300 - total flux cleaned = -0.000453006 Jy ! Component: 350 - total flux cleaned = -0.000651361 Jy ! Component: 400 - total flux cleaned = -0.000876764 Jy ! Component: 450 - total flux cleaned = -0.000971107 Jy ! Component: 500 - total flux cleaned = -0.00112419 Jy ! Component: 550 - total flux cleaned = -0.00106445 Jy ! Component: 600 - total flux cleaned = -0.00118166 Jy ! Component: 650 - total flux cleaned = -0.0010668 Jy ! Component: 700 - total flux cleaned = -0.000981988 Jy ! Component: 750 - total flux cleaned = -0.000954232 Jy ! Component: 800 - total flux cleaned = -0.000899176 Jy ! Component: 850 - total flux cleaned = -0.000792285 Jy ! Component: 900 - total flux cleaned = -0.000766148 Jy ! Component: 950 - total flux cleaned = -0.000610957 Jy ! Component: 1000 - total flux cleaned = -0.000534973 Jy ! Component: 1050 - total flux cleaned = -0.000435117 Jy ! Component: 1100 - total flux cleaned = -0.00033709 Jy ! Component: 1150 - total flux cleaned = -0.000288758 Jy ! Component: 1200 - total flux cleaned = -0.00012181 Jy ! Component: 1250 - total flux cleaned = -7.47452e-05 Jy ! Component: 1300 - total flux cleaned = 1.87089e-05 Jy ! Component: 1350 - total flux cleaned = 0.000178807 Jy ! Component: 1400 - total flux cleaned = 0.000245882 Jy ! Component: 1450 - total flux cleaned = 0.000290613 Jy ! Component: 1500 - total flux cleaned = 0.000356321 Jy ! Component: 1550 - total flux cleaned = 0.000378091 Jy ! Component: 1600 - total flux cleaned = 0.000442668 Jy ! Component: 1650 - total flux cleaned = 0.000485431 Jy ! Component: 1700 - total flux cleaned = 0.000548311 Jy ! Component: 1750 - total flux cleaned = 0.000630378 Jy ! Component: 1800 - total flux cleaned = 0.00067108 Jy ! Component: 1850 - total flux cleaned = 0.00073154 Jy ! Component: 1900 - total flux cleaned = 0.000790867 Jy ! Component: 1950 - total flux cleaned = 0.000810478 Jy ! Component: 2000 - total flux cleaned = 0.000888108 Jy ! Component: 2050 - total flux cleaned = 0.00088836 Jy ! Component: 2100 - total flux cleaned = 0.00100196 Jy ! Component: 2150 - total flux cleaned = 0.00103929 Jy ! Component: 2200 - total flux cleaned = 0.00107608 Jy ! Component: 2250 - total flux cleaned = 0.00111294 Jy ! Component: 2300 - total flux cleaned = 0.00109487 Jy ! Component: 2350 - total flux cleaned = 0.00116677 Jy ! Component: 2400 - total flux cleaned = 0.0012204 Jy ! Component: 2450 - total flux cleaned = 0.00132558 Jy ! Component: 2500 - total flux cleaned = 0.00136036 Jy ! Component: 2550 - total flux cleaned = 0.00148096 Jy ! Component: 2600 - total flux cleaned = 0.00151493 Jy ! Component: 2650 - total flux cleaned = 0.00159927 Jy ! Component: 2700 - total flux cleaned = 0.00159925 Jy ! Component: 2750 - total flux cleaned = 0.00168218 Jy ! Component: 2800 - total flux cleaned = 0.00178064 Jy ! Component: 2850 - total flux cleaned = 0.00182968 Jy ! Component: 2900 - total flux cleaned = 0.00189413 Jy ! Component: 2950 - total flux cleaned = 0.00197385 Jy ! Component: 3000 - total flux cleaned = 0.00200553 Jy ! Component: 3050 - total flux cleaned = 0.00208405 Jy ! Component: 3100 - total flux cleaned = 0.00213071 Jy ! Component: 3150 - total flux cleaned = 0.00209981 Jy ! Component: 3200 - total flux cleaned = 0.00219149 Jy ! Component: 3250 - total flux cleaned = 0.0021611 Jy ! Component: 3300 - total flux cleaned = 0.002161 Jy ! Component: 3350 - total flux cleaned = 0.00220579 Jy ! Component: 3400 - total flux cleaned = 0.0021763 Jy ! Component: 3450 - total flux cleaned = 0.00217625 Jy ! Component: 3500 - total flux cleaned = 0.00219106 Jy ! Component: 3550 - total flux cleaned = 0.00217681 Jy ! Component: 3600 - total flux cleaned = 0.00226297 Jy ! Component: 3650 - total flux cleaned = 0.00226278 Jy ! Component: 3700 - total flux cleaned = 0.00227692 Jy ! Component: 3750 - total flux cleaned = 0.00230507 Jy ! Component: 3800 - total flux cleaned = 0.00236104 Jy ! Component: 3850 - total flux cleaned = 0.00241652 Jy ! Component: 3900 - total flux cleaned = 0.00243048 Jy ! Component: 3950 - total flux cleaned = 0.00244441 Jy ! Component: 4000 - total flux cleaned = 0.00251266 Jy ! Component: 4050 - total flux cleaned = 0.00255339 Jy ! Total flux subtracted in 4096 components = 0.00260721 Jy ! Clean residual min=-0.000731 max=0.000752 Jy/beam ! Clean residual mean=-0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0871079 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 332 components and 0.0871078 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0110-1648_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 7.722 at -2.772 degrees (North through East) ! Clean map min=-0.0016553 max=0.07025 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0110-1648_S_map.fits wmodel /image_prod/ug002_uva//J0110-1648_S_map.mod ! Writing 332 model components to file: /image_prod/ug002_uva//J0110-1648_S_map.mod wobs /image_prod/ug002_uva//J0110-1648_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0110-1648_S_uvs.fits wwins /image_prod/ug002_uva//J0110-1648_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0110-1648_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0702499 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237423 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01391 1.01391 2.02781 4.05563 8.11126 16.2225 32.445 64.8901 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.07 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 295.885 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0110-1648_S_dfm.log closed on Wed Mar 4 18:53:53 2020