! Started logfile: /image_prod/ug002_uva//J0108-0037_X_dfm.log on Wed Mar 4 18:52:07 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0108-0037_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0108-0037_X_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.973611 visibilities/baseline/integration-bin. ! Found source: J0108-0037 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 25236 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0108-0037_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012838Jy sigma=9.170305 ! Fit after self-cal, rms=0.859704Jy sigma=7.781831 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6513 mas, bmaj=1.749 mas, bpa=-1.201 degrees ! Estimated noise=0.841003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100381 Jy ! Component: 100 - total flux cleaned = 0.140683 Jy ! Total flux subtracted in 100 components = 0.140683 Jy ! Clean residual min=-0.012360 max=0.039375 Jy/beam ! Clean residual mean=0.000010 rms=0.002853 Jy/beam ! Combined flux in latest and established models = 0.140683 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.140683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090295Jy sigma=0.800344 ! Fit after self-cal, rms=0.090170Jy sigma=0.799217 ! Inverting map ! Added new window around map position (4.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350084 Jy ! Component: 100 - total flux cleaned = 0.0558382 Jy ! Total flux subtracted in 100 components = 0.0558382 Jy ! Clean residual min=-0.007009 max=0.011653 Jy/beam ! Clean residual mean=0.000007 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.196521 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.196521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069695Jy sigma=0.609767 ! Fit after self-cal, rms=0.069395Jy sigma=0.606595 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155895 Jy ! Component: 100 - total flux cleaned = 0.0268435 Jy ! Total flux subtracted in 100 components = 0.0268435 Jy ! Clean residual min=-0.005504 max=0.010388 Jy/beam ! Clean residual mean=0.000006 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.223365 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.223365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062890Jy sigma=0.544917 ! Fit after self-cal, rms=0.062862Jy sigma=0.544513 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103026 Jy ! Component: 100 - total flux cleaned = 0.0179417 Jy ! Total flux subtracted in 100 components = 0.0179417 Jy ! Clean residual min=-0.004749 max=0.007262 Jy/beam ! Clean residual mean=0.000005 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.241307 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.241307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059558Jy sigma=0.513389 ! Fit after self-cal, rms=0.059492Jy sigma=0.512868 ! Inverting map ! Added new window around map position (5.6, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769171 Jy ! Component: 100 - total flux cleaned = 0.01341 Jy ! Total flux subtracted in 100 components = 0.01341 Jy ! Clean residual min=-0.004333 max=0.004797 Jy/beam ! Clean residual mean=0.000004 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.254717 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.254717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057518Jy sigma=0.492943 ! Fit after self-cal, rms=0.057472Jy sigma=0.492535 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8141 mas, bmaj=2.003 mas, bpa=-1.05 degrees ! Estimated noise=0.500574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101592 Jy ! Component: 100 - total flux cleaned = 0.0177598 Jy ! Component: 150 - total flux cleaned = 0.0236764 Jy ! Component: 200 - total flux cleaned = 0.0283706 Jy ! Total flux subtracted in 200 components = 0.0283706 Jy ! Clean residual min=-0.003985 max=0.004344 Jy/beam ! Clean residual mean=0.000002 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.283087 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 68 components and 0.283087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054954Jy sigma=0.467495 ! Fit after self-cal, rms=0.054853Jy sigma=0.466581 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8141 x 2.003 at -1.05 degrees (North through East) ! Clean map min=-0.003967 max=0.14679 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.04 KP 1.04 ! LA 1.02 MK 0.98 OV 0.93 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 1.05 KP 1.02 ! LA 1.02 MK 1.00 OV 0.91 PT 0.89 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 1.02 ! LA 1.00 MK 1.01 OV 0.92 PT 0.91 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.02 KP 1.04 ! LA 1.02 MK 1.01 OV 0.93 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.02 ! LA 1.02 MK 1.04 OV 0.93 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.04 KP 1.03 ! LA 1.02 MK 1.01 OV 0.91 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.04 KP 1.00 ! LA 1.04 MK 1.05 OV 0.92 PT 0.89 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.00 KP 1.05 ! LA 1.02 MK 1.02 OV 0.92 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.02 KP 1.02 ! LA 1.01 MK 0.98 OV 0.93 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.05 KP 1.04 ! LA 1.03 MK 1.05 OV 0.92 PT 0.90 ! SC 1.06 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.02 KP 1.02 ! LA 1.01 MK 1.05 OV 0.94 PT 0.91 ! SC 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.03 KP 1.06 ! LA 1.01 MK 1.07 OV 0.92 PT 0.89 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.054853Jy sigma=0.466581 ! Fit after self-cal, rms=0.053236Jy sigma=0.454272 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8252 mas, bmaj=2.018 mas, bpa=-0.8575 degrees ! Estimated noise=0.492937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295318 Jy ! Component: 100 - total flux cleaned = 0.0047876 Jy ! Component: 150 - total flux cleaned = 0.00561456 Jy ! Component: 200 - total flux cleaned = 0.0058523 Jy ! Total flux subtracted in 200 components = 0.0058523 Jy ! Clean residual min=-0.001788 max=0.002675 Jy/beam ! Clean residual mean=-0.000001 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.28894 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.28894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053063Jy sigma=0.452279 ! Fit after self-cal, rms=0.053057Jy sigma=0.452102 ! Inverting map ! Added new window around map position (30.6, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249695 Jy ! Component: 100 - total flux cleaned = 0.00387263 Jy ! Component: 150 - total flux cleaned = 0.00476723 Jy ! Component: 200 - total flux cleaned = 0.0053885 Jy ! Total flux subtracted in 200 components = 0.0053885 Jy ! Clean residual min=-0.001572 max=0.001692 Jy/beam ! Clean residual mean=-0.000000 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.294328 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 113 components and 0.294328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052937Jy sigma=0.450695 ! Fit after self-cal, rms=0.052929Jy sigma=0.450639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052929Jy sigma=0.450639 ! Fit after self-cal, rms=0.052974Jy sigma=0.449055 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8253 mas, bmaj=2.018 mas, bpa=-0.8119 degrees ! Estimated noise=0.493215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000974662 Jy ! Component: 100 - total flux cleaned = 0.00138728 Jy ! Component: 150 - total flux cleaned = 0.00151835 Jy ! Component: 200 - total flux cleaned = 0.00163983 Jy ! Total flux subtracted in 200 components = 0.00163983 Jy ! Clean residual min=-0.001432 max=0.001509 Jy/beam ! Clean residual mean=-0.000000 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.295968 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 132 components and 0.295968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052946Jy sigma=0.448757 ! Fit after self-cal, rms=0.052949Jy sigma=0.448741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38, 40.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134322 Jy ! Component: 100 - total flux cleaned = 0.00194533 Jy ! Component: 150 - total flux cleaned = 0.00230913 Jy ! Component: 200 - total flux cleaned = 0.00255164 Jy ! Total flux subtracted in 200 components = 0.00255164 Jy ! Clean residual min=-0.001367 max=0.001399 Jy/beam ! Clean residual mean=-0.000000 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.29852 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 150 components and 0.29852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052909Jy sigma=0.448349 ! Fit after self-cal, rms=0.052906Jy sigma=0.448324 ! Inverting map ! Added new window around map position (16.8, 21.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135111 Jy ! Component: 100 - total flux cleaned = 0.00202967 Jy ! Component: 150 - total flux cleaned = 0.00243248 Jy ! Component: 200 - total flux cleaned = 0.00276691 Jy ! Total flux subtracted in 200 components = 0.00276691 Jy ! Clean residual min=-0.001265 max=0.001151 Jy/beam ! Clean residual mean=-0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.301286 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 162 components and 0.301287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052865Jy sigma=0.447935 ! Fit after self-cal, rms=0.052859Jy sigma=0.447894 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052859Jy sigma=0.447894 ! Fit after self-cal, rms=0.052839Jy sigma=0.447766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8244 mas, bmaj=2.017 mas, bpa=-0.8063 degrees ! Estimated noise=0.493024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000714881 Jy ! Component: 100 - total flux cleaned = 0.00111195 Jy ! Component: 150 - total flux cleaned = 0.00138526 Jy ! Component: 200 - total flux cleaned = 0.00156441 Jy ! Total flux subtracted in 200 components = 0.00156441 Jy ! Clean residual min=-0.001164 max=0.001082 Jy/beam ! Clean residual mean=-0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.302851 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 180 components and 0.302851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052822Jy sigma=0.447622 ! Fit after self-cal, rms=0.052820Jy sigma=0.447610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360969 Jy ! Component: 100 - total flux cleaned = 0.000528394 Jy ! Component: 150 - total flux cleaned = 0.000670498 Jy ! Component: 200 - total flux cleaned = 0.00078978 Jy ! Total flux subtracted in 200 components = 0.00078978 Jy ! Clean residual min=-0.001133 max=0.001030 Jy/beam ! Clean residual mean=-0.000000 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.303641 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 194 components and 0.303641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052810Jy sigma=0.447532 ! Fit after self-cal, rms=0.052809Jy sigma=0.447529 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052809Jy sigma=0.447529 ! Fit after self-cal, rms=0.052794Jy sigma=0.447517 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=3.506 mas, bpa=11.54 degrees ! Estimated noise=0.63558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948876 Jy ! Component: 100 - total flux cleaned = 0.00156235 Jy ! Component: 150 - total flux cleaned = 0.00198926 Jy ! Component: 200 - total flux cleaned = 0.00223124 Jy ! Total flux subtracted in 200 components = 0.00223124 Jy ! Clean residual min=-0.001303 max=0.001570 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.305872 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 211 components and 0.305872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052792Jy sigma=0.447472 ! Fit after self-cal, rms=0.052790Jy sigma=0.447458 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354363 Jy ! Component: 100 - total flux cleaned = 0.000511263 Jy ! Component: 150 - total flux cleaned = 0.000623036 Jy ! Component: 200 - total flux cleaned = 0.000712519 Jy ! Total flux subtracted in 200 components = 0.000712519 Jy ! Clean residual min=-0.001250 max=0.001522 Jy/beam ! Clean residual mean=-0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.306585 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 223 components and 0.306585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052789Jy sigma=0.447447 ! Fit after self-cal, rms=0.052789Jy sigma=0.447444 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.824 mas, bmaj=2.016 mas, bpa=-0.8044 degrees ! Estimated noise=0.493051 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.824 x 2.016 at -0.8044 degrees (North through East) ! Clean map min=-0.00094531 max=0.14479 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6566 mas, bmaj=1.751 mas, bpa=-0.8574 degrees ! Estimated noise=0.836503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.099462 Jy ! Component: 100 - total flux cleaned = 0.144419 Jy ! Component: 150 - total flux cleaned = 0.174575 Jy ! Component: 200 - total flux cleaned = 0.195287 Jy ! Total flux subtracted in 200 components = 0.195287 Jy ! Clean residual min=-0.005845 max=0.011750 Jy/beam ! Clean residual mean=0.000005 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.195287 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.195287 Jy ! Inverting map and beam ! Estimated beam: bmin=0.824 mas, bmaj=2.016 mas, bpa=-0.8044 degrees ! Estimated noise=0.493051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241978 Jy ! Component: 100 - total flux cleaned = 0.041305 Jy ! Component: 150 - total flux cleaned = 0.0538162 Jy ! Component: 200 - total flux cleaned = 0.0632313 Jy ! Total flux subtracted in 200 components = 0.0632313 Jy ! Clean residual min=-0.003895 max=0.005438 Jy/beam ! Clean residual mean=0.000001 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.258518 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 41 components and 0.258518 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720934 Jy ! Component: 100 - total flux cleaned = 0.0127901 Jy ! Component: 150 - total flux cleaned = 0.0171556 Jy ! Component: 200 - total flux cleaned = 0.0206604 Jy ! Total flux subtracted in 200 components = 0.0206604 Jy ! Clean residual min=-0.002433 max=0.002697 Jy/beam ! Clean residual mean=-0.000000 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.279179 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 66 components and 0.279179 Jy ! Inverting map ! Added new window around map position (3.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309263 Jy ! Component: 100 - total flux cleaned = 0.00565078 Jy ! Component: 150 - total flux cleaned = 0.00787263 Jy ! Component: 200 - total flux cleaned = 0.00983013 Jy ! Total flux subtracted in 200 components = 0.00983013 Jy ! Clean residual min=-0.001837 max=0.001922 Jy/beam ! Clean residual mean=-0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.289009 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 92 components and 0.289009 Jy ! Inverting map ! Added new window around map position (32.4, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205209 Jy ! Component: 100 - total flux cleaned = 0.00364058 Jy ! Component: 150 - total flux cleaned = 0.0050459 Jy ! Component: 200 - total flux cleaned = 0.00631202 Jy ! Total flux subtracted in 200 components = 0.00631202 Jy ! Clean residual min=-0.001461 max=0.001507 Jy/beam ! Clean residual mean=-0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.295321 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 118 components and 0.295321 Jy ! Inverting map ! Added new window around map position (-0.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142426 Jy ! Component: 100 - total flux cleaned = 0.00234403 Jy ! Component: 150 - total flux cleaned = 0.00322151 Jy ! Component: 200 - total flux cleaned = 0.00402434 Jy ! Total flux subtracted in 200 components = 0.00402434 Jy ! Clean residual min=-0.001325 max=0.001041 Jy/beam ! Clean residual mean=-0.000001 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.299345 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 136 components and 0.299345 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.316 mas, bmaj=3.506 mas, bpa=11.54 degrees ! Estimated noise=0.63558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014565 Jy ! Component: 100 - total flux cleaned = 0.00261756 Jy ! Component: 150 - total flux cleaned = 0.00343046 Jy ! Component: 200 - total flux cleaned = 0.00412811 Jy ! Total flux subtracted in 200 components = 0.00412811 Jy ! Clean residual min=-0.001412 max=0.001370 Jy/beam ! Clean residual mean=-0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.303473 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495866 Jy ! Component: 100 - total flux cleaned = 0.000912059 Jy ! Component: 150 - total flux cleaned = 0.0013125 Jy ! Component: 200 - total flux cleaned = 0.00159331 Jy ! Total flux subtracted in 200 components = 0.00159331 Jy ! Clean residual min=-0.001359 max=0.001337 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.305066 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 204 components and 0.305066 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.824 mas, bmaj=2.016 mas, bpa=-0.8044 degrees ! Estimated noise=0.493051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.68935e-05 Jy ! Component: 100 - total flux cleaned = 0.000107277 Jy ! Component: 150 - total flux cleaned = 0.000211746 Jy ! Component: 200 - total flux cleaned = 0.000308332 Jy ! Total flux subtracted in 200 components = 0.000308332 Jy ! Clean residual min=-0.001089 max=0.000954 Jy/beam ! Clean residual mean=-0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.305375 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 225 components and 0.305375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052758Jy sigma=0.447179 ! Fit after self-cal, rms=0.052751Jy sigma=0.447119 wmodel J0108-0037_X_map.mod ! Writing 225 model components to file: J0108-0037_X_map.mod wobs J0108-0037_X_uvs.fits ! Writing UV FITS file: J0108-0037_X_uvs.fits wwins J0108-0037_X_map.win ! wwins: Wrote 11 windows to J0108-0037_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195868 Jy ! Component: 100 - total flux cleaned = -0.000338491 Jy ! Component: 150 - total flux cleaned = -0.000423496 Jy ! Component: 200 - total flux cleaned = -0.000505923 Jy ! Component: 250 - total flux cleaned = -0.000632668 Jy ! Component: 300 - total flux cleaned = -0.000786047 Jy ! Component: 350 - total flux cleaned = -0.000920459 Jy ! Component: 400 - total flux cleaned = -0.000949576 Jy ! Component: 450 - total flux cleaned = -0.00100683 Jy ! Component: 500 - total flux cleaned = -0.000964731 Jy ! Component: 550 - total flux cleaned = -0.000937312 Jy ! Component: 600 - total flux cleaned = -0.000923472 Jy ! Component: 650 - total flux cleaned = -0.000883543 Jy ! Component: 700 - total flux cleaned = -0.000883643 Jy ! Component: 750 - total flux cleaned = -0.000870918 Jy ! Component: 800 - total flux cleaned = -0.000896382 Jy ! Component: 850 - total flux cleaned = -0.000933833 Jy ! Component: 900 - total flux cleaned = -0.000958289 Jy ! Component: 950 - total flux cleaned = -0.00100667 Jy ! Component: 1000 - total flux cleaned = -0.0010064 Jy ! Component: 1050 - total flux cleaned = -0.0010181 Jy ! Component: 1100 - total flux cleaned = -0.00102977 Jy ! Component: 1150 - total flux cleaned = -0.00106424 Jy ! Component: 1200 - total flux cleaned = -0.00103003 Jy ! Component: 1250 - total flux cleaned = -0.00105253 Jy ! Component: 1300 - total flux cleaned = -0.00103011 Jy ! Component: 1350 - total flux cleaned = -0.00104117 Jy ! Component: 1400 - total flux cleaned = -0.00105215 Jy ! Component: 1450 - total flux cleaned = -0.00108462 Jy ! Component: 1500 - total flux cleaned = -0.00109543 Jy ! Component: 1550 - total flux cleaned = -0.00113796 Jy ! Component: 1600 - total flux cleaned = -0.0011798 Jy ! Component: 1650 - total flux cleaned = -0.0011799 Jy ! Component: 1700 - total flux cleaned = -0.00126214 Jy ! Component: 1750 - total flux cleaned = -0.00128254 Jy ! Component: 1800 - total flux cleaned = -0.00128234 Jy ! Component: 1850 - total flux cleaned = -0.00133233 Jy ! Component: 1900 - total flux cleaned = -0.00136197 Jy ! Component: 1950 - total flux cleaned = -0.00136195 Jy ! Component: 2000 - total flux cleaned = -0.00139138 Jy ! Component: 2050 - total flux cleaned = -0.00144947 Jy ! Component: 2100 - total flux cleaned = -0.00144955 Jy ! Component: 2150 - total flux cleaned = -0.00144964 Jy ! Component: 2200 - total flux cleaned = -0.00151575 Jy ! Component: 2250 - total flux cleaned = -0.00152513 Jy ! Component: 2300 - total flux cleaned = -0.00155297 Jy ! Component: 2350 - total flux cleaned = -0.00155294 Jy ! Component: 2400 - total flux cleaned = -0.00153473 Jy ! Component: 2450 - total flux cleaned = -0.00156197 Jy ! Component: 2500 - total flux cleaned = -0.00159787 Jy ! Component: 2550 - total flux cleaned = -0.00161565 Jy ! Component: 2600 - total flux cleaned = -0.00162456 Jy ! Component: 2650 - total flux cleaned = -0.00163338 Jy ! Component: 2700 - total flux cleaned = -0.0016684 Jy ! Component: 2750 - total flux cleaned = -0.0016857 Jy ! Component: 2800 - total flux cleaned = -0.00170286 Jy ! Component: 2850 - total flux cleaned = -0.00173704 Jy ! Component: 2900 - total flux cleaned = -0.00176255 Jy ! Component: 2950 - total flux cleaned = -0.00178783 Jy ! Component: 3000 - total flux cleaned = -0.00177952 Jy ! Component: 3050 - total flux cleaned = -0.00177124 Jy ! Component: 3100 - total flux cleaned = -0.00183753 Jy ! Component: 3150 - total flux cleaned = -0.00185398 Jy ! Component: 3200 - total flux cleaned = -0.00185408 Jy ! Component: 3250 - total flux cleaned = -0.0018622 Jy ! Component: 3300 - total flux cleaned = -0.00190247 Jy ! Component: 3350 - total flux cleaned = -0.00191842 Jy ! Component: 3400 - total flux cleaned = -0.00187073 Jy ! Component: 3450 - total flux cleaned = -0.00190246 Jy ! Component: 3500 - total flux cleaned = -0.0019339 Jy ! Component: 3550 - total flux cleaned = -0.00196508 Jy ! Component: 3600 - total flux cleaned = -0.0019107 Jy ! Component: 3650 - total flux cleaned = -0.00192614 Jy ! Component: 3700 - total flux cleaned = -0.00194152 Jy ! Component: 3750 - total flux cleaned = -0.00195668 Jy ! Component: 3800 - total flux cleaned = -0.00198697 Jy ! Component: 3850 - total flux cleaned = -0.00197938 Jy ! Component: 3900 - total flux cleaned = -0.00200931 Jy ! Component: 3950 - total flux cleaned = -0.00200929 Jy ! Component: 4000 - total flux cleaned = -0.00200926 Jy ! Component: 4050 - total flux cleaned = -0.00202405 Jy ! Total flux subtracted in 4096 components = -0.00203867 Jy ! Clean residual min=-0.000462 max=0.000452 Jy/beam ! Clean residual mean=-0.000000 rms=0.000125 Jy/beam ! Combined flux in latest and established models = 0.303336 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 515 components and 0.303336 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0108-0037_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.824 x 2.016 at -0.8044 degrees (North through East) ! Clean map min=-0.00074601 max=0.14441 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0108-0037_X_map.fits wmodel /image_prod/ug002_uva//J0108-0037_X_map.mod ! Writing 515 model components to file: /image_prod/ug002_uva//J0108-0037_X_map.mod wobs /image_prod/ug002_uva//J0108-0037_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0108-0037_X_uvs.fits wwins /image_prod/ug002_uva//J0108-0037_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0108-0037_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.144411 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000125027 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259731 0.259731 0.519461 1.03892 2.07784 4.15569 8.31138 16.6228 33.2455 66.491 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.144 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1155.04 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0108-0037_X_dfm.log closed on Wed Mar 4 18:52:14 2020