! Started logfile: /image_prod/ug002_uva//J0106-0155_X_dfm.log on Wed Mar 4 18:51:10 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0106-0155_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0106-0155_X_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980741 visibilities/baseline/integration-bin. ! Found source: J0106-0155 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23832 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0106-0155_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.005004Jy sigma=9.835878 ! Fit after self-cal, rms=0.926441Jy sigma=9.027485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6623 mas, bmaj=1.759 mas, bpa=-2.127 degrees ! Estimated noise=0.737647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503548 Jy ! Component: 100 - total flux cleaned = 0.0692874 Jy ! Total flux subtracted in 100 components = 0.0692874 Jy ! Clean residual min=-0.005992 max=0.016817 Jy/beam ! Clean residual mean=0.000017 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.0692874 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0692874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068203Jy sigma=0.651861 ! Fit after self-cal, rms=0.067410Jy sigma=0.644327 ! Inverting map ! Added new window around map position (-0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161306 Jy ! Component: 100 - total flux cleaned = 0.0248216 Jy ! Total flux subtracted in 100 components = 0.0248216 Jy ! Clean residual min=-0.004421 max=0.011956 Jy/beam ! Clean residual mean=0.000013 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.094109 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.094109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061731Jy sigma=0.583441 ! Fit after self-cal, rms=0.061401Jy sigma=0.580187 ! Inverting map ! Added new window around map position (3.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113646 Jy ! Component: 100 - total flux cleaned = 0.0181302 Jy ! Total flux subtracted in 100 components = 0.0181302 Jy ! Clean residual min=-0.003766 max=0.010417 Jy/beam ! Clean residual mean=0.000012 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.112239 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.112239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058175Jy sigma=0.545645 ! Fit after self-cal, rms=0.058001Jy sigma=0.544337 ! Inverting map ! Added new window around map position (2.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00992616 Jy ! Component: 100 - total flux cleaned = 0.0162013 Jy ! Total flux subtracted in 100 components = 0.0162013 Jy ! Clean residual min=-0.003087 max=0.004925 Jy/beam ! Clean residual mean=0.000011 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.12844 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 59 components and 0.12844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055100Jy sigma=0.511462 ! Fit after self-cal, rms=0.054951Jy sigma=0.509969 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8362 mas, bmaj=2.052 mas, bpa=-2.534 degrees ! Estimated noise=0.475748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103908 Jy ! Component: 100 - total flux cleaned = 0.0178455 Jy ! Component: 150 - total flux cleaned = 0.0235727 Jy ! Component: 200 - total flux cleaned = 0.0279917 Jy ! Total flux subtracted in 200 components = 0.0279917 Jy ! Clean residual min=-0.003782 max=0.004168 Jy/beam ! Clean residual mean=0.000011 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.156432 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 0.156432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052374Jy sigma=0.481390 ! Fit after self-cal, rms=0.052207Jy sigma=0.479680 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8362 x 2.052 at -2.534 degrees (North through East) ! Clean map min=-0.0036289 max=0.07398 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.96 KP 1.03 ! LA 0.97 MK 1.05 NL 1.11 OV 0.88 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.04 KP 1.02 ! LA 0.97 MK 1.01 NL 1.09 OV 0.93 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 1.01 KP 1.03 ! LA 0.98 MK 1.02 NL 1.14 OV 0.88 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.00 KP 1.02 ! LA 0.98 MK 1.04 NL 1.11 OV 0.87 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.00 KP 1.01 ! LA 0.95 MK 1.05 NL 1.14 OV 0.92 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 0.99 KP 1.01 ! LA 0.97 MK 1.06 NL 1.15 OV 0.84 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.05 HN 1.04 KP 1.00 ! LA 0.99 MK 1.07 NL 1.09 OV 0.91 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.02 KP 1.03 ! LA 0.98 MK 1.01 NL 1.09 OV 0.91 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 0.95 KP 0.99 ! LA 0.97 MK 1.07 NL 1.15 OV 0.91 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.04 HN 0.93 KP 1.01 ! LA 0.96 MK 1.00 NL 1.12 OV 0.93 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.97 KP 1.03 ! LA 0.98 MK 1.06 NL 1.12 OV 0.93 ! PT 0.91 SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.93 KP 1.02 ! LA 0.99 MK 1.02 NL 1.14 OV 0.94 ! PT 0.90 SC 1.01 ! ! ! Fit before self-cal, rms=0.052207Jy sigma=0.479680 ! Fit after self-cal, rms=0.049505Jy sigma=0.471378 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8472 mas, bmaj=2.058 mas, bpa=-1.743 degrees ! Estimated noise=0.460479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401447 Jy ! Component: 100 - total flux cleaned = 0.0068241 Jy ! Component: 150 - total flux cleaned = 0.00897038 Jy ! Component: 200 - total flux cleaned = 0.0103905 Jy ! Total flux subtracted in 200 components = 0.0103905 Jy ! Clean residual min=-0.002219 max=0.002800 Jy/beam ! Clean residual mean=0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.166823 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 107 components and 0.166823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049112Jy sigma=0.466506 ! Fit after self-cal, rms=0.049093Jy sigma=0.466120 ! Inverting map ! Added new window around map position (4.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023469 Jy ! Component: 100 - total flux cleaned = 0.00364126 Jy ! Component: 150 - total flux cleaned = 0.00461636 Jy ! Component: 200 - total flux cleaned = 0.00546629 Jy ! Total flux subtracted in 200 components = 0.00546629 Jy ! Clean residual min=-0.001887 max=0.002763 Jy/beam ! Clean residual mean=0.000005 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.172289 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 0.172289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048948Jy sigma=0.464475 ! Fit after self-cal, rms=0.048933Jy sigma=0.464355 ! Inverting map ! Added new window around map position (17.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246322 Jy ! Component: 100 - total flux cleaned = 0.00389852 Jy ! Component: 150 - total flux cleaned = 0.00510061 Jy ! Component: 200 - total flux cleaned = 0.00595705 Jy ! Total flux subtracted in 200 components = 0.00595705 Jy ! Clean residual min=-0.001580 max=0.002342 Jy/beam ! Clean residual mean=0.000004 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.178246 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 141 components and 0.178246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048787Jy sigma=0.462729 ! Fit after self-cal, rms=0.048772Jy sigma=0.462605 ! Inverting map ! Added new window around map position (13, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216175 Jy ! Component: 100 - total flux cleaned = 0.00347463 Jy ! Component: 150 - total flux cleaned = 0.00459747 Jy ! Component: 200 - total flux cleaned = 0.00561368 Jy ! Total flux subtracted in 200 components = 0.00561368 Jy ! Clean residual min=-0.001427 max=0.001632 Jy/beam ! Clean residual mean=0.000003 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.18386 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 176 components and 0.18386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048658Jy sigma=0.461231 ! Fit after self-cal, rms=0.048651Jy sigma=0.461176 ! Inverting map ! Added new window around map position (1.2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145715 Jy ! Component: 100 - total flux cleaned = 0.00229876 Jy ! Component: 150 - total flux cleaned = 0.0029972 Jy ! Component: 200 - total flux cleaned = 0.00365022 Jy ! Total flux subtracted in 200 components = 0.00365022 Jy ! Clean residual min=-0.001291 max=0.001443 Jy/beam ! Clean residual mean=0.000002 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.18751 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 192 components and 0.18751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048582Jy sigma=0.460494 ! Fit after self-cal, rms=0.048575Jy sigma=0.460454 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048575Jy sigma=0.460454 ! Fit after self-cal, rms=0.048554Jy sigma=0.458665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8458 mas, bmaj=2.065 mas, bpa=-1.98 degrees ! Estimated noise=0.459181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664197 Jy ! Component: 100 - total flux cleaned = 0.00133621 Jy ! Component: 150 - total flux cleaned = 0.00194731 Jy ! Component: 200 - total flux cleaned = 0.00250858 Jy ! Total flux subtracted in 200 components = 0.00250858 Jy ! Clean residual min=-0.001077 max=0.001091 Jy/beam ! Clean residual mean=0.000001 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.190019 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 217 components and 0.190019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048522Jy sigma=0.458326 ! Fit after self-cal, rms=0.048528Jy sigma=0.458298 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953394 Jy ! Component: 100 - total flux cleaned = 0.00148898 Jy ! Component: 150 - total flux cleaned = 0.00198313 Jy ! Component: 200 - total flux cleaned = 0.0023586 Jy ! Total flux subtracted in 200 components = 0.0023586 Jy ! Clean residual min=-0.000994 max=0.001062 Jy/beam ! Clean residual mean=0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.192377 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 245 components and 0.192377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048500Jy sigma=0.458000 ! Fit after self-cal, rms=0.048497Jy sigma=0.457983 ! Inverting map ! Added new window around map position (-33, 41.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646294 Jy ! Component: 100 - total flux cleaned = 0.000960575 Jy ! Component: 150 - total flux cleaned = 0.0013587 Jy ! Component: 200 - total flux cleaned = 0.00167044 Jy ! Total flux subtracted in 200 components = 0.00167044 Jy ! Clean residual min=-0.000965 max=0.000840 Jy/beam ! Clean residual mean=0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.194048 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 259 components and 0.194048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048470Jy sigma=0.457711 ! Fit after self-cal, rms=0.048468Jy sigma=0.457700 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048468Jy sigma=0.457700 ! Fit after self-cal, rms=0.048428Jy sigma=0.457342 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8443 mas, bmaj=2.064 mas, bpa=-2.028 degrees ! Estimated noise=0.457637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316527 Jy ! Component: 100 - total flux cleaned = 0.000625207 Jy ! Component: 150 - total flux cleaned = 0.000932208 Jy ! Component: 200 - total flux cleaned = 0.00120666 Jy ! Total flux subtracted in 200 components = 0.00120666 Jy ! Clean residual min=-0.000955 max=0.000836 Jy/beam ! Clean residual mean=0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.195254 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 276 components and 0.195254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048413Jy sigma=0.457197 ! Fit after self-cal, rms=0.048417Jy sigma=0.457188 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310086 Jy ! Component: 100 - total flux cleaned = 0.000589187 Jy ! Component: 150 - total flux cleaned = 0.000773786 Jy ! Component: 200 - total flux cleaned = 0.000984605 Jy ! Total flux subtracted in 200 components = 0.000984605 Jy ! Clean residual min=-0.000940 max=0.000830 Jy/beam ! Clean residual mean=0.000000 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.196239 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 286 components and 0.196239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048406Jy sigma=0.457085 ! Fit after self-cal, rms=0.048406Jy sigma=0.457084 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048406Jy sigma=0.457084 ! Fit after self-cal, rms=0.048322Jy sigma=0.457074 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.141 mas, bmaj=3.506 mas, bpa=2.083 degrees ! Estimated noise=0.571617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700693 Jy ! Component: 100 - total flux cleaned = 0.00128445 Jy ! Component: 150 - total flux cleaned = 0.00172933 Jy ! Component: 200 - total flux cleaned = 0.00212424 Jy ! Total flux subtracted in 200 components = 0.00212424 Jy ! Clean residual min=-0.000846 max=0.001055 Jy/beam ! Clean residual mean=-0.000000 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.198363 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 314 components and 0.198363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048317Jy sigma=0.456995 ! Fit after self-cal, rms=0.048318Jy sigma=0.456988 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361166 Jy ! Component: 100 - total flux cleaned = 0.000732068 Jy ! Component: 150 - total flux cleaned = 0.00106618 Jy ! Component: 200 - total flux cleaned = 0.00136844 Jy ! Total flux subtracted in 200 components = 0.00136844 Jy ! Clean residual min=-0.000797 max=0.001002 Jy/beam ! Clean residual mean=-0.000001 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.199732 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 324 components and 0.199732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048316Jy sigma=0.456954 ! Fit after self-cal, rms=0.048315Jy sigma=0.456950 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=2.064 mas, bpa=-2.059 degrees ! Estimated noise=0.456766 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8437 x 2.064 at -2.059 degrees (North through East) ! Clean map min=-0.00083547 max=0.071465 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.667 mas, bmaj=1.764 mas, bpa=-1.619 degrees ! Estimated noise=0.715356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495067 Jy ! Component: 100 - total flux cleaned = 0.0716573 Jy ! Component: 150 - total flux cleaned = 0.0865811 Jy ! Component: 200 - total flux cleaned = 0.0980549 Jy ! Total flux subtracted in 200 components = 0.0980549 Jy ! Clean residual min=-0.003926 max=0.006784 Jy/beam ! Clean residual mean=0.000011 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.0980548 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0980548 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=2.064 mas, bpa=-2.059 degrees ! Estimated noise=0.456766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158779 Jy ! Component: 100 - total flux cleaned = 0.0274741 Jy ! Component: 150 - total flux cleaned = 0.0362129 Jy ! Component: 200 - total flux cleaned = 0.0428869 Jy ! Total flux subtracted in 200 components = 0.0428869 Jy ! Clean residual min=-0.002792 max=0.003992 Jy/beam ! Clean residual mean=0.000008 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.140942 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 0.140942 Jy ! Inverting map ! Added new window around map position (3, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524856 Jy ! Component: 100 - total flux cleaned = 0.0095988 Jy ! Component: 150 - total flux cleaned = 0.0132917 Jy ! Component: 200 - total flux cleaned = 0.0164997 Jy ! Total flux subtracted in 200 components = 0.0164997 Jy ! Clean residual min=-0.002056 max=0.002297 Jy/beam ! Clean residual mean=0.000006 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.157441 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 88 components and 0.157441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.141 mas, bmaj=3.506 mas, bpa=2.083 degrees ! Estimated noise=0.571617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519664 Jy ! Component: 100 - total flux cleaned = 0.00939408 Jy ! Component: 150 - total flux cleaned = 0.0129755 Jy ! Component: 200 - total flux cleaned = 0.0160667 Jy ! Total flux subtracted in 200 components = 0.0160667 Jy ! Clean residual min=-0.002175 max=0.002225 Jy/beam ! Clean residual mean=0.000007 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.173508 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269118 Jy ! Component: 100 - total flux cleaned = 0.00504501 Jy ! Component: 150 - total flux cleaned = 0.00711562 Jy ! Component: 200 - total flux cleaned = 0.00894289 Jy ! Total flux subtracted in 200 components = 0.00894289 Jy ! Clean residual min=-0.001500 max=0.001585 Jy/beam ! Clean residual mean=0.000003 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.182451 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 164 components and 0.182451 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=2.064 mas, bpa=-2.059 degrees ! Estimated noise=0.456766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151456 Jy ! Component: 100 - total flux cleaned = 0.0026964 Jy ! Component: 150 - total flux cleaned = 0.00377069 Jy ! Component: 200 - total flux cleaned = 0.00476221 Jy ! Total flux subtracted in 200 components = 0.00476221 Jy ! Clean residual min=-0.001064 max=0.001113 Jy/beam ! Clean residual mean=0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.187213 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 190 components and 0.187213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048426Jy sigma=0.458172 ! Fit after self-cal, rms=0.048400Jy sigma=0.458000 wmodel J0106-0155_X_map.mod ! Writing 190 model components to file: J0106-0155_X_map.mod wobs J0106-0155_X_uvs.fits ! Writing UV FITS file: J0106-0155_X_uvs.fits wwins J0106-0155_X_map.win ! wwins: Wrote 12 windows to J0106-0155_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250065 Jy ! Component: 100 - total flux cleaned = -0.000392522 Jy ! Component: 150 - total flux cleaned = -0.000512346 Jy ! Component: 200 - total flux cleaned = -0.000611333 Jy ! Component: 250 - total flux cleaned = -0.000706996 Jy ! Component: 300 - total flux cleaned = -0.000753125 Jy ! Component: 350 - total flux cleaned = -0.000782889 Jy ! Component: 400 - total flux cleaned = -0.000782838 Jy ! Component: 450 - total flux cleaned = -0.000826473 Jy ! Component: 500 - total flux cleaned = -0.000826461 Jy ! Component: 550 - total flux cleaned = -0.000854371 Jy ! Component: 600 - total flux cleaned = -0.000854135 Jy ! Component: 650 - total flux cleaned = -0.000867889 Jy ! Component: 700 - total flux cleaned = -0.000881385 Jy ! Component: 750 - total flux cleaned = -0.000868329 Jy ! Component: 800 - total flux cleaned = -0.000842185 Jy ! Component: 850 - total flux cleaned = -0.000842274 Jy ! Component: 900 - total flux cleaned = -0.000791519 Jy ! Component: 950 - total flux cleaned = -0.000816254 Jy ! Component: 1000 - total flux cleaned = -0.000803736 Jy ! Component: 1050 - total flux cleaned = -0.000791332 Jy ! Component: 1100 - total flux cleaned = -0.000767154 Jy ! Component: 1150 - total flux cleaned = -0.00075549 Jy ! Component: 1200 - total flux cleaned = -0.000755379 Jy ! Component: 1250 - total flux cleaned = -0.000778693 Jy ! Component: 1300 - total flux cleaned = -0.000732231 Jy ! Component: 1350 - total flux cleaned = -0.000720825 Jy ! Component: 1400 - total flux cleaned = -0.00068685 Jy ! Component: 1450 - total flux cleaned = -0.000675705 Jy ! Component: 1500 - total flux cleaned = -0.000631192 Jy ! Component: 1550 - total flux cleaned = -0.000598081 Jy ! Component: 1600 - total flux cleaned = -0.00058717 Jy ! Component: 1650 - total flux cleaned = -0.000554651 Jy ! Component: 1700 - total flux cleaned = -0.000565473 Jy ! Component: 1750 - total flux cleaned = -0.000544201 Jy ! Component: 1800 - total flux cleaned = -0.000491274 Jy ! Component: 1850 - total flux cleaned = -0.000543848 Jy ! Component: 1900 - total flux cleaned = -0.000522957 Jy ! Component: 1950 - total flux cleaned = -0.000491881 Jy ! Component: 2000 - total flux cleaned = -0.000563565 Jy ! Component: 2050 - total flux cleaned = -0.000543203 Jy ! Component: 2100 - total flux cleaned = -0.00051305 Jy ! Component: 2150 - total flux cleaned = -0.000583056 Jy ! Component: 2200 - total flux cleaned = -0.000513421 Jy ! Component: 2250 - total flux cleaned = -0.000582565 Jy ! Component: 2300 - total flux cleaned = -0.000572712 Jy ! Component: 2350 - total flux cleaned = -0.000533867 Jy ! Component: 2400 - total flux cleaned = -0.000562974 Jy ! Component: 2450 - total flux cleaned = -0.000562988 Jy ! Component: 2500 - total flux cleaned = -0.000563052 Jy ! Component: 2550 - total flux cleaned = -0.000600978 Jy ! Component: 2600 - total flux cleaned = -0.000619824 Jy ! Component: 2650 - total flux cleaned = -0.000619928 Jy ! Component: 2700 - total flux cleaned = -0.000647787 Jy ! Component: 2750 - total flux cleaned = -0.000601758 Jy ! Component: 2800 - total flux cleaned = -0.000702692 Jy ! Component: 2850 - total flux cleaned = -0.000702695 Jy ! Component: 2900 - total flux cleaned = -0.0006937 Jy ! Component: 2950 - total flux cleaned = -0.000738703 Jy ! Component: 3000 - total flux cleaned = -0.000765464 Jy ! Component: 3050 - total flux cleaned = -0.000756538 Jy ! Component: 3100 - total flux cleaned = -0.000765409 Jy ! Component: 3150 - total flux cleaned = -0.000747926 Jy ! Component: 3200 - total flux cleaned = -0.000817863 Jy ! Component: 3250 - total flux cleaned = -0.000826524 Jy ! Component: 3300 - total flux cleaned = -0.000835097 Jy ! Component: 3350 - total flux cleaned = -0.000878059 Jy ! Component: 3400 - total flux cleaned = -0.000886518 Jy ! Component: 3450 - total flux cleaned = -0.000878022 Jy ! Component: 3500 - total flux cleaned = -0.00094553 Jy ! Component: 3550 - total flux cleaned = -0.000912046 Jy ! Component: 3600 - total flux cleaned = -0.000953858 Jy ! Component: 3650 - total flux cleaned = -0.000995374 Jy ! Component: 3700 - total flux cleaned = -0.000978857 Jy ! Component: 3750 - total flux cleaned = -0.000962436 Jy ! Component: 3800 - total flux cleaned = -0.000986954 Jy ! Component: 3850 - total flux cleaned = -0.00101952 Jy ! Component: 3900 - total flux cleaned = -0.00102764 Jy ! Component: 3950 - total flux cleaned = -0.00104374 Jy ! Component: 4000 - total flux cleaned = -0.00108383 Jy ! Component: 4050 - total flux cleaned = -0.00105201 Jy ! Total flux subtracted in 4096 components = -0.00106787 Jy ! Clean residual min=-0.000412 max=0.000431 Jy/beam ! Clean residual mean=0.000000 rms=0.000138 Jy/beam ! Combined flux in latest and established models = 0.186145 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 511 components and 0.186145 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0106-0155_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8437 x 2.064 at -2.059 degrees (North through East) ! Clean map min=-0.00074312 max=0.07105 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0106-0155_X_map.fits wmodel /image_prod/ug002_uva//J0106-0155_X_map.mod ! Writing 511 model components to file: /image_prod/ug002_uva//J0106-0155_X_map.mod wobs /image_prod/ug002_uva//J0106-0155_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0106-0155_X_uvs.fits wwins /image_prod/ug002_uva//J0106-0155_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J0106-0155_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0710502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000137885 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.582203 0.582203 1.16441 2.32881 4.65762 9.31524 18.6305 37.261 74.5219 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.071 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 515.284 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0106-0155_X_dfm.log closed on Wed Mar 4 18:51:17 2020