! Started logfile: /image_prod/ug002_uva//J0106+1951_S_dfm.log on Wed Mar  4 18:50:43 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0106+1951_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0106+1951_S_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! AN table 2: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.902315 visibilities/baseline/integration-bin.
! Found source: J0106+1951
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5847 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0106+1951_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.017212Jy  sigma=8.549524
! Fit after  self-cal, rms=0.853244Jy  sigma=7.262218
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.704 mas, bmaj=6.41 mas, bpa=-8.216 degrees
! Estimated noise=1.75096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112794 Jy
! Component: 100  -  total flux cleaned = 0.13739 Jy
! Total flux subtracted in 100 components = 0.13739 Jy
! Clean residual min=-0.004743 max=0.006861 Jy/beam
! Clean residual mean=0.000016 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.13739 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.13739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073067Jy  sigma=0.469788
! Fit after  self-cal, rms=0.073057Jy  sigma=0.469756
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=7.213 mas, bpa=-6.805 degrees
! Estimated noise=1.1479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00609488 Jy
! Component: 100  -  total flux cleaned = 0.00789803 Jy
! Component: 150  -  total flux cleaned = 0.00796387 Jy
! Component: 200  -  total flux cleaned = 0.00807854 Jy
! Total flux subtracted in 200 components = 0.00807854 Jy
! Clean residual min=-0.004946 max=0.005161 Jy/beam
! Clean residual mean=0.000011 rms=0.001106 Jy/beam
! Combined flux in latest and established models = 0.145469 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.145469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072076Jy  sigma=0.467369
! Fit after  self-cal, rms=0.072080Jy  sigma=0.467360
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.158 x 7.213 at -6.805 degrees (North through East)
! Clean map  min=-0.0048455  max=0.14495 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.01     KP        1.03     
!   LA        1.06     MK        0.97     NL        0.90     OV        0.90     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.95     HN        0.96     KP        1.03     
!   LA        0.96     MK        0.92     OV        0.92     PT        1.09     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.16     HN        0.98     KP        1.03     
!   LA        1.06     MK        0.97     NL        1.08     OV        0.92     
!   SC        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.99     HN        1.04     KP        1.05     
!   LA        1.03     MK        0.95     OV        0.93     PT        1.07     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.14     HN        1.05     KP        1.04     
!   LA        1.00     MK        0.99     NL        1.19     OV        0.92     
!   SC        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.95     HN        1.09     KP        1.02     
!   LA        0.96     MK        1.03     OV        0.89     PT        1.05     
!   SC        1.06     
! 
! 
! Fit before self-cal, rms=0.072080Jy  sigma=0.467360
! Fit after  self-cal, rms=0.070257Jy  sigma=0.452905
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=7.216 mas, bpa=-7.02 degrees
! Estimated noise=1.15535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164775 Jy
! Component: 100  -  total flux cleaned = 0.00169286 Jy
! Component: 150  -  total flux cleaned = 0.00172529 Jy
! Component: 200  -  total flux cleaned = 0.00175013 Jy
! Total flux subtracted in 200 components = 0.00175013 Jy
! Clean residual min=-0.003093 max=0.003105 Jy/beam
! Clean residual mean=0.000001 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.147219 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.147219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070091Jy  sigma=0.452963
! Fit after  self-cal, rms=0.070104Jy  sigma=0.452839
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070104Jy  sigma=0.452839
! Fit after  self-cal, rms=0.061846Jy  sigma=0.437836
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=7.212 mas, bpa=-7.312 degrees
! Estimated noise=1.16096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105639 Jy
! Component: 100  -  total flux cleaned = 0.00126163 Jy
! Component: 150  -  total flux cleaned = 0.00131318 Jy
! Component: 200  -  total flux cleaned = 0.0013703 Jy
! Total flux subtracted in 200 components = 0.0013703 Jy
! Clean residual min=-0.002068 max=0.001701 Jy/beam
! Clean residual mean=-0.000002 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.148589 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.148589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061810Jy  sigma=0.437745
! Fit after  self-cal, rms=0.061808Jy  sigma=0.437658
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.81521e-05 Jy
! Component: 100  -  total flux cleaned = 7.90583e-05 Jy
! Component: 150  -  total flux cleaned = 9.91382e-05 Jy
! Component: 200  -  total flux cleaned = 9.91258e-05 Jy
! Total flux subtracted in 200 components = 9.91258e-05 Jy
! Clean residual min=-0.002073 max=0.001693 Jy/beam
! Clean residual mean=-0.000002 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.148688 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.148688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061802Jy  sigma=0.437641
! Fit after  self-cal, rms=0.061801Jy  sigma=0.437639
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061801Jy  sigma=0.437639
! Fit after  self-cal, rms=0.060884Jy  sigma=0.436675
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=7.201 mas, bpa=-7.455 degrees
! Estimated noise=1.16051 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368297 Jy
! Component: 100  -  total flux cleaned = 0.000442835 Jy
! Component: 150  -  total flux cleaned = 0.000509021 Jy
! Component: 200  -  total flux cleaned = 0.000568369 Jy
! Total flux subtracted in 200 components = 0.000568369 Jy
! Clean residual min=-0.001854 max=0.001843 Jy/beam
! Clean residual mean=-0.000003 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.149257 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 0.149257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060871Jy  sigma=0.436602
! Fit after  self-cal, rms=0.060864Jy  sigma=0.436596
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.89687e-05 Jy
! Component: 100  -  total flux cleaned = 7.13187e-05 Jy
! Component: 150  -  total flux cleaned = 7.11761e-05 Jy
! Component: 200  -  total flux cleaned = 7.15715e-05 Jy
! Total flux subtracted in 200 components = 7.15715e-05 Jy
! Clean residual min=-0.001851 max=0.001837 Jy/beam
! Clean residual mean=-0.000003 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.149328 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.149328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060858Jy  sigma=0.436570
! Fit after  self-cal, rms=0.060858Jy  sigma=0.436570
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060858Jy  sigma=0.436570
! Fit after  self-cal, rms=0.060773Jy  sigma=0.436545
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.341 mas, bmaj=10.45 mas, bpa=-7.474 degrees
! Estimated noise=1.42061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.64862e-05 Jy
! Component: 100  -  total flux cleaned = 0.000131671 Jy
! Component: 150  -  total flux cleaned = 0.00016244 Jy
! Component: 200  -  total flux cleaned = 0.000179573 Jy
! Total flux subtracted in 200 components = 0.000179573 Jy
! Clean residual min=-0.002039 max=0.001812 Jy/beam
! Clean residual mean=-0.000007 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.149508 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 52 components and 0.149508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060771Jy  sigma=0.436532
! Fit after  self-cal, rms=0.060771Jy  sigma=0.436529
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.19384e-06 Jy
! Component: 100  -  total flux cleaned = 3.71391e-05 Jy
! Component: 150  -  total flux cleaned = 5.34977e-05 Jy
! Component: 200  -  total flux cleaned = 5.81639e-05 Jy
! Total flux subtracted in 200 components = 5.81639e-05 Jy
! Clean residual min=-0.002054 max=0.001804 Jy/beam
! Clean residual mean=-0.000007 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.149566 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 60 components and 0.149566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060771Jy  sigma=0.436538
! Fit after  self-cal, rms=0.060771Jy  sigma=0.436537
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=7.193 mas, bpa=-7.508 degrees
! Estimated noise=1.16036 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.157 x 7.193 at -7.508 degrees (North through East)
! Clean map  min=-0.0017479  max=0.14638 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.7 mas, bmaj=6.4 mas, bpa=-9.043 degrees
! Estimated noise=1.75685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113172 Jy
! Component: 100  -  total flux cleaned = 0.13785 Jy
! Component: 150  -  total flux cleaned = 0.144268 Jy
! Component: 200  -  total flux cleaned = 0.147031 Jy
! Total flux subtracted in 200 components = 0.147031 Jy
! Clean residual min=-0.002273 max=0.002427 Jy/beam
! Clean residual mean=-0.000001 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.147031 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.147031 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=7.193 mas, bpa=-7.508 degrees
! Estimated noise=1.16036 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184851 Jy
! Component: 100  -  total flux cleaned = 0.0027158 Jy
! Component: 150  -  total flux cleaned = 0.00289672 Jy
! Component: 200  -  total flux cleaned = 0.0029331 Jy
! Total flux subtracted in 200 components = 0.0029331 Jy
! Clean residual min=-0.001869 max=0.001814 Jy/beam
! Clean residual mean=-0.000003 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.149964 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.149964 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.341 mas, bmaj=10.45 mas, bpa=-7.474 degrees
! Estimated noise=1.42061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.6151e-05 Jy
! Component: 100  -  total flux cleaned = -9.424e-05 Jy
! Component: 150  -  total flux cleaned = -0.00011419 Jy
! Component: 200  -  total flux cleaned = -0.000131097 Jy
! Total flux subtracted in 200 components = -0.000131097 Jy
! Clean residual min=-0.002068 max=0.001789 Jy/beam
! Clean residual mean=-0.000007 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.149833 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.19542e-06 Jy
! Component: 100  -  total flux cleaned = -1.44393e-05 Jy
! Component: 150  -  total flux cleaned = -2.08486e-05 Jy
! Component: 200  -  total flux cleaned = -2.70656e-05 Jy
! Total flux subtracted in 200 components = -2.70656e-05 Jy
! Clean residual min=-0.002060 max=0.001796 Jy/beam
! Clean residual mean=-0.000007 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.149806 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 40 components and 0.149806 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.157 mas, bmaj=7.193 mas, bpa=-7.508 degrees
! Estimated noise=1.16036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017899 Jy
! Component: 100  -  total flux cleaned = 0.000203969 Jy
! Component: 150  -  total flux cleaned = 0.000215024 Jy
! Component: 200  -  total flux cleaned = 0.000224646 Jy
! Total flux subtracted in 200 components = 0.000224646 Jy
! Clean residual min=-0.001865 max=0.001816 Jy/beam
! Clean residual mean=-0.000003 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.150031 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 60 components and 0.150031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060764Jy  sigma=0.436559
! Fit after  self-cal, rms=0.060760Jy  sigma=0.436553
wmodel J0106+1951_S_map.mod
! Writing 60 model components to file: J0106+1951_S_map.mod
wobs   J0106+1951_S_uvs.fits
! Writing UV FITS file: J0106+1951_S_uvs.fits
wwins  J0106+1951_S_map.win
! wwins: Wrote 1 windows to J0106+1951_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000487668 Jy
! Component: 100  -  total flux cleaned = -0.000840225 Jy
! Component: 150  -  total flux cleaned = -0.00102145 Jy
! Component: 200  -  total flux cleaned = -0.00116532 Jy
! Component: 250  -  total flux cleaned = -0.00124972 Jy
! Component: 300  -  total flux cleaned = -0.00122309 Jy
! Component: 350  -  total flux cleaned = -0.00122366 Jy
! Component: 400  -  total flux cleaned = -0.00127558 Jy
! Component: 450  -  total flux cleaned = -0.00132563 Jy
! Component: 500  -  total flux cleaned = -0.00132571 Jy
! Component: 550  -  total flux cleaned = -0.00144645 Jy
! Component: 600  -  total flux cleaned = -0.00147002 Jy
! Component: 650  -  total flux cleaned = -0.00151637 Jy
! Component: 700  -  total flux cleaned = -0.00156202 Jy
! Component: 750  -  total flux cleaned = -0.0016074 Jy
! Component: 800  -  total flux cleaned = -0.0016512 Jy
! Component: 850  -  total flux cleaned = -0.00160741 Jy
! Component: 900  -  total flux cleaned = -0.00165063 Jy
! Component: 950  -  total flux cleaned = -0.00160848 Jy
! Component: 1000  -  total flux cleaned = -0.00165038 Jy
! Component: 1050  -  total flux cleaned = -0.00160947 Jy
! Component: 1100  -  total flux cleaned = -0.0015489 Jy
! Component: 1150  -  total flux cleaned = -0.00160942 Jy
! Component: 1200  -  total flux cleaned = -0.00160946 Jy
! Component: 1250  -  total flux cleaned = -0.00153148 Jy
! Component: 1300  -  total flux cleaned = -0.00155116 Jy
! Component: 1350  -  total flux cleaned = -0.00162728 Jy
! Component: 1400  -  total flux cleaned = -0.00158936 Jy
! Component: 1450  -  total flux cleaned = -0.0016079 Jy
! Component: 1500  -  total flux cleaned = -0.00157121 Jy
! Component: 1550  -  total flux cleaned = -0.00153455 Jy
! Component: 1600  -  total flux cleaned = -0.00146271 Jy
! Component: 1650  -  total flux cleaned = -0.00140967 Jy
! Component: 1700  -  total flux cleaned = -0.00146231 Jy
! Component: 1750  -  total flux cleaned = -0.00146229 Jy
! Component: 1800  -  total flux cleaned = -0.00144469 Jy
! Component: 1850  -  total flux cleaned = -0.00142771 Jy
! Component: 1900  -  total flux cleaned = -0.00142755 Jy
! Component: 1950  -  total flux cleaned = -0.00142734 Jy
! Component: 2000  -  total flux cleaned = -0.00136122 Jy
! Component: 2050  -  total flux cleaned = -0.00136107 Jy
! Component: 2100  -  total flux cleaned = -0.00131277 Jy
! Component: 2150  -  total flux cleaned = -0.00131277 Jy
! Component: 2200  -  total flux cleaned = -0.00129696 Jy
! Component: 2250  -  total flux cleaned = -0.00126587 Jy
! Component: 2300  -  total flux cleaned = -0.00125033 Jy
! Component: 2350  -  total flux cleaned = -0.00118854 Jy
! Component: 2400  -  total flux cleaned = -0.00117338 Jy
! Component: 2450  -  total flux cleaned = -0.00111272 Jy
! Component: 2500  -  total flux cleaned = -0.0011128 Jy
! Component: 2550  -  total flux cleaned = -0.00109789 Jy
! Component: 2600  -  total flux cleaned = -0.00106858 Jy
! Component: 2650  -  total flux cleaned = -0.00105402 Jy
! Component: 2700  -  total flux cleaned = -0.00101029 Jy
! Component: 2750  -  total flux cleaned = -0.000967069 Jy
! Component: 2800  -  total flux cleaned = -0.000966836 Jy
! Component: 2850  -  total flux cleaned = -0.000910427 Jy
! Component: 2900  -  total flux cleaned = -0.000896353 Jy
! Component: 2950  -  total flux cleaned = -0.000868286 Jy
! Component: 3000  -  total flux cleaned = -0.000813279 Jy
! Component: 3050  -  total flux cleaned = -0.000772131 Jy
! Component: 3100  -  total flux cleaned = -0.000772212 Jy
! Component: 3150  -  total flux cleaned = -0.000731891 Jy
! Component: 3200  -  total flux cleaned = -0.000785314 Jy
! Component: 3250  -  total flux cleaned = -0.000705886 Jy
! Component: 3300  -  total flux cleaned = -0.000745299 Jy
! Component: 3350  -  total flux cleaned = -0.00071926 Jy
! Component: 3400  -  total flux cleaned = -0.000693479 Jy
! Component: 3450  -  total flux cleaned = -0.000642042 Jy
! Component: 3500  -  total flux cleaned = -0.000667477 Jy
! Component: 3550  -  total flux cleaned = -0.000641996 Jy
! Component: 3600  -  total flux cleaned = -0.000642026 Jy
! Component: 3650  -  total flux cleaned = -0.000604516 Jy
! Component: 3700  -  total flux cleaned = -0.000530248 Jy
! Component: 3750  -  total flux cleaned = -0.000518038 Jy
! Component: 3800  -  total flux cleaned = -0.000481457 Jy
! Component: 3850  -  total flux cleaned = -0.000469366 Jy
! Component: 3900  -  total flux cleaned = -0.000433231 Jy
! Component: 3950  -  total flux cleaned = -0.000421235 Jy
! Component: 4000  -  total flux cleaned = -0.000385536 Jy
! Component: 4050  -  total flux cleaned = -0.000350071 Jy
! Total flux subtracted in 4096 components = -0.000408718 Jy
! Clean residual min=-0.000831 max=0.000687 Jy/beam
! Clean residual mean=0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.149622 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 351 components and 0.149622 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0106+1951_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.157 x 7.193 at -7.508 degrees (North through East)
! Clean map  min=-0.0015827  max=0.14619 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0106+1951_S_map.fits
wmodel /image_prod/ug002_uva//J0106+1951_S_map.mod
! Writing 351 model components to file: /image_prod/ug002_uva//J0106+1951_S_map.mod
wobs   /image_prod/ug002_uva//J0106+1951_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0106+1951_S_uvs.fits
wwins  /image_prod/ug002_uva//J0106+1951_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0106+1951_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.146187 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212989 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.437088 0.437088 0.874175 1.74835 3.4967 6.9934 13.9868 27.9736 55.9472
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.146 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  686.361 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0106+1951_S_dfm.log closed on Wed Mar  4 18:50:47 2020