! Started logfile: /image_prod/ug002_uva//J0105+5125_X_dfm.log on Wed Mar 4 18:50:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0105+5125_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0105+5125_X_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! AN table 2: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.922963 visibilities/baseline/integration-bin. ! Found source: J0105+5125 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0105+5125_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004926Jy sigma=9.113014 ! Fit after self-cal, rms=0.941813Jy sigma=8.535428 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6851 mas, bmaj=1.174 mas, bpa=-1.076 degrees ! Estimated noise=1.03264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040121 Jy ! Component: 100 - total flux cleaned = 0.0522046 Jy ! Total flux subtracted in 100 components = 0.0522046 Jy ! Clean residual min=-0.004744 max=0.015196 Jy/beam ! Clean residual mean=0.000008 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.0522046 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0522046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064716Jy sigma=0.567354 ! Fit after self-cal, rms=0.063800Jy sigma=0.559315 ! Inverting map ! Added new window around map position (-3.6, 4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142438 Jy ! Component: 100 - total flux cleaned = 0.021847 Jy ! Total flux subtracted in 100 components = 0.021847 Jy ! Clean residual min=-0.003538 max=0.005585 Jy/beam ! Clean residual mean=0.000008 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0740516 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.0740516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059367Jy sigma=0.516424 ! Fit after self-cal, rms=0.058941Jy sigma=0.512675 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709601 Jy ! Component: 100 - total flux cleaned = 0.0120792 Jy ! Total flux subtracted in 100 components = 0.0120792 Jy ! Clean residual min=-0.003211 max=0.004656 Jy/beam ! Clean residual mean=0.000007 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.0861308 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.0861308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057403Jy sigma=0.497551 ! Fit after self-cal, rms=0.057336Jy sigma=0.496891 ! Inverting map ! Added new window around map position (1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490493 Jy ! Component: 100 - total flux cleaned = 0.00836333 Jy ! Total flux subtracted in 100 components = 0.00836333 Jy ! Clean residual min=-0.002943 max=0.004485 Jy/beam ! Clean residual mean=0.000006 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0944941 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.0944941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056599Jy sigma=0.489660 ! Fit after self-cal, rms=0.056578Jy sigma=0.489402 ! Inverting map ! Added new window around map position (-2.4, 3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458921 Jy ! Component: 100 - total flux cleaned = 0.00751246 Jy ! Total flux subtracted in 100 components = 0.00751246 Jy ! Clean residual min=-0.002908 max=0.003235 Jy/beam ! Clean residual mean=0.000005 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.102007 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 0.102007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055959Jy sigma=0.483191 ! Fit after self-cal, rms=0.055907Jy sigma=0.482726 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9135 mas, bmaj=1.516 mas, bpa=-0.9259 degrees ! Estimated noise=0.456383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568361 Jy ! Component: 100 - total flux cleaned = 0.00978803 Jy ! Component: 150 - total flux cleaned = 0.0130529 Jy ! Component: 200 - total flux cleaned = 0.0156844 Jy ! Total flux subtracted in 200 components = 0.0156844 Jy ! Clean residual min=-0.002802 max=0.003411 Jy/beam ! Clean residual mean=0.000003 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.117691 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 99 components and 0.117691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055120Jy sigma=0.475057 ! Fit after self-cal, rms=0.055084Jy sigma=0.474685 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9135 x 1.516 at -0.9259 degrees (North through East) ! Clean map min=-0.0027508 max=0.057552 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 KP 1.02 LA 0.93 ! MK 1.12 NL 1.18 OV 0.93 PT 0.81 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.05 HN 1.04 KP 1.08 ! LA 0.92 MK 1.15 OV 0.87 PT 0.87 ! SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 KP 1.01 LA 0.95 ! MK 1.03 NL 1.13 OV 0.94 PT 0.82 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 HN 0.97 KP 1.07 ! LA 1.06 MK 1.06 OV 0.96 PT 0.85 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 1.03 LA 0.95 ! MK 1.11 NL 1.17 OV 0.87 PT 0.82 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.12 HN 0.91 KP 1.11 ! LA 1.01 MK 1.00 OV 0.88 PT 0.84 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 KP 1.00 LA 0.97 ! MK 1.08 NL 1.14 OV 0.90 PT 0.82 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.10 HN 1.04 KP 1.06 ! LA 1.07 MK 1.08 OV 0.87 PT 0.82 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 KP 1.01 LA 0.94 ! MK 1.08 NL 1.17 OV 0.98 PT 0.83 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.07 HN 1.04 KP 1.16 ! LA 1.00 MK 0.97 OV 0.94 PT 0.84 ! SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 KP 1.05 LA 0.94 ! MK 1.07 NL 1.19 OV 0.93 PT 0.84 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 0.91 KP 1.05 ! LA 1.17 MK 1.12 OV 0.86 PT 0.84 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.07 KP 1.02 LA 1.00 ! MK 0.98 NL 1.16 OV 0.91 PT 0.89 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.95 HN 1.09 KP 1.10 ! LA 1.05 MK 1.04 OV 0.91 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 KP 1.05 LA 0.94 ! MK 1.19 NL 1.19 OV 0.91 PT 0.84 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.93 HN 1.07 KP 1.04 ! LA 1.06 MK 1.21 OV 0.93 PT 0.87 ! SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 KP 1.06 LA 0.94 ! MK 0.96 NL 1.18 OV 0.91 PT 0.83 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.03 HN 0.98 KP 1.04 ! LA 1.09 MK 1.06 OV 0.90 PT 0.88 ! SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.09 KP 1.06 LA 0.91 ! MK 1.09 NL 1.17 OV 0.96 PT 0.85 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.06 HN 1.02 KP 1.10 ! LA 0.94 MK 1.05 OV 1.01 PT 0.88 ! SC 0.81 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 KP 1.05 LA 0.93 ! MK 0.97 NL 1.23 OV 0.98 PT 0.85 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 0.92 KP 1.12 ! LA 1.07 MK 0.97 OV 0.97 PT 0.89 ! SC 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 KP 1.07 LA 1.02 ! MK 0.99 NL 1.18 OV 0.96 PT 0.85 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.04 HN 0.95 KP 1.14 ! LA 1.04 MK 1.18 OV 0.93 PT 0.91 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.055084Jy sigma=0.474685 ! Fit after self-cal, rms=0.053282Jy sigma=0.467060 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9278 mas, bmaj=1.536 mas, bpa=0.5504 degrees ! Estimated noise=0.447705 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.2, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235211 Jy ! Component: 100 - total flux cleaned = 0.00370193 Jy ! Component: 150 - total flux cleaned = 0.00438732 Jy ! Component: 200 - total flux cleaned = 0.00470982 Jy ! Total flux subtracted in 200 components = 0.00470982 Jy ! Clean residual min=-0.001146 max=0.001370 Jy/beam ! Clean residual mean=0.000004 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.122401 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 0.122401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053168Jy sigma=0.465805 ! Fit after self-cal, rms=0.053208Jy sigma=0.465428 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053208Jy sigma=0.465428 ! Fit after self-cal, rms=0.053210Jy sigma=0.464691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.927 mas, bmaj=1.532 mas, bpa=0.7401 degrees ! Estimated noise=0.447911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905787 Jy ! Component: 100 - total flux cleaned = 0.00126455 Jy ! Component: 150 - total flux cleaned = 0.00145785 Jy ! Component: 200 - total flux cleaned = 0.00158097 Jy ! Total flux subtracted in 200 components = 0.00158097 Jy ! Clean residual min=-0.000925 max=0.001244 Jy/beam ! Clean residual mean=0.000002 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.123982 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.123982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053177Jy sigma=0.464360 ! Fit after self-cal, rms=0.053179Jy sigma=0.464302 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942788 Jy ! Component: 100 - total flux cleaned = 0.000972697 Jy ! Component: 150 - total flux cleaned = 0.000996173 Jy ! Component: 200 - total flux cleaned = 0.00103964 Jy ! Total flux subtracted in 200 components = 0.00103964 Jy ! Clean residual min=-0.000895 max=0.001009 Jy/beam ! Clean residual mean=0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.125021 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.125021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053147Jy sigma=0.464014 ! Fit after self-cal, rms=0.053144Jy sigma=0.463988 ! Inverting map ! Added new window around map position (18.4, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909853 Jy ! Component: 100 - total flux cleaned = 0.0012638 Jy ! Component: 150 - total flux cleaned = 0.00141004 Jy ! Component: 200 - total flux cleaned = 0.00152574 Jy ! Total flux subtracted in 200 components = 0.00152574 Jy ! Clean residual min=-0.000846 max=0.000953 Jy/beam ! Clean residual mean=0.000002 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.126547 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 153 components and 0.126547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053122Jy sigma=0.463784 ! Fit after self-cal, rms=0.053119Jy sigma=0.463764 ! Inverting map ! Added new window around map position (17.2, -30.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835847 Jy ! Component: 100 - total flux cleaned = 0.00105479 Jy ! Component: 150 - total flux cleaned = 0.0011443 Jy ! Component: 200 - total flux cleaned = 0.00117792 Jy ! Total flux subtracted in 200 components = 0.00117792 Jy ! Clean residual min=-0.000830 max=0.000845 Jy/beam ! Clean residual mean=0.000002 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.127725 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 170 components and 0.127725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053100Jy sigma=0.463613 ! Fit after self-cal, rms=0.053098Jy sigma=0.463601 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053098Jy sigma=0.463601 ! Fit after self-cal, rms=0.052978Jy sigma=0.463546 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9259 mas, bmaj=1.529 mas, bpa=0.7849 degrees ! Estimated noise=0.447177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493918 Jy ! Component: 100 - total flux cleaned = 0.000777751 Jy ! Component: 150 - total flux cleaned = 0.000937972 Jy ! Component: 200 - total flux cleaned = 0.00099833 Jy ! Total flux subtracted in 200 components = 0.00099833 Jy ! Clean residual min=-0.000797 max=0.000830 Jy/beam ! Clean residual mean=0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.128723 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 179 components and 0.128723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052968Jy sigma=0.463459 ! Fit after self-cal, rms=0.052970Jy sigma=0.463451 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018984 Jy ! Component: 100 - total flux cleaned = 0.000247525 Jy ! Component: 150 - total flux cleaned = 0.00028888 Jy ! Component: 200 - total flux cleaned = 0.000328854 Jy ! Total flux subtracted in 200 components = 0.000328854 Jy ! Clean residual min=-0.000790 max=0.000830 Jy/beam ! Clean residual mean=0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.129052 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 182 components and 0.129052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052963Jy sigma=0.463396 ! Fit after self-cal, rms=0.052962Jy sigma=0.463393 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052962Jy sigma=0.463393 ! Fit after self-cal, rms=0.052964Jy sigma=0.463388 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=2.686 mas, bpa=8.279 degrees ! Estimated noise=0.559769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00055064 Jy ! Component: 100 - total flux cleaned = 0.000758371 Jy ! Component: 150 - total flux cleaned = 0.00084427 Jy ! Component: 200 - total flux cleaned = 0.000886716 Jy ! Total flux subtracted in 200 components = 0.000886716 Jy ! Clean residual min=-0.000873 max=0.000863 Jy/beam ! Clean residual mean=0.000002 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.129939 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 195 components and 0.129939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052962Jy sigma=0.463359 ! Fit after self-cal, rms=0.052962Jy sigma=0.463349 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.68631e-05 Jy ! Component: 100 - total flux cleaned = 8.7488e-05 Jy ! Component: 150 - total flux cleaned = 0.00012397 Jy ! Component: 200 - total flux cleaned = 0.000132718 Jy ! Total flux subtracted in 200 components = 0.000132718 Jy ! Clean residual min=-0.000862 max=0.000834 Jy/beam ! Clean residual mean=0.000002 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.130072 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 204 components and 0.130072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052962Jy sigma=0.463343 ! Fit after self-cal, rms=0.052961Jy sigma=0.463340 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9257 mas, bmaj=1.529 mas, bpa=0.8526 degrees ! Estimated noise=0.447286 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9257 x 1.529 at 0.8526 degrees (North through East) ! Clean map min=-0.00093264 max=0.056091 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6917 mas, bmaj=1.182 mas, bpa=0.7577 degrees ! Estimated noise=1.03046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415684 Jy ! Component: 100 - total flux cleaned = 0.0592475 Jy ! Component: 150 - total flux cleaned = 0.070261 Jy ! Component: 200 - total flux cleaned = 0.0783671 Jy ! Total flux subtracted in 200 components = 0.0783671 Jy ! Clean residual min=-0.003595 max=0.004751 Jy/beam ! Clean residual mean=0.000007 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.0783671 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0783671 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9257 mas, bmaj=1.529 mas, bpa=0.8526 degrees ! Estimated noise=0.447286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106686 Jy ! Component: 100 - total flux cleaned = 0.0179314 Jy ! Component: 150 - total flux cleaned = 0.0233976 Jy ! Component: 200 - total flux cleaned = 0.0277657 Jy ! Total flux subtracted in 200 components = 0.0277657 Jy ! Clean residual min=-0.001665 max=0.002798 Jy/beam ! Clean residual mean=0.000008 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.106133 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 63 components and 0.106133 Jy ! Inverting map ! Added new window around map position (-0.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358763 Jy ! Component: 100 - total flux cleaned = 0.0065013 Jy ! Component: 150 - total flux cleaned = 0.00889651 Jy ! Component: 200 - total flux cleaned = 0.0108925 Jy ! Total flux subtracted in 200 components = 0.0108925 Jy ! Clean residual min=-0.001309 max=0.001500 Jy/beam ! Clean residual mean=0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.117025 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 89 components and 0.117025 Jy ! Inverting map ! Added new window around map position (-2.4, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175198 Jy ! Component: 100 - total flux cleaned = 0.00324053 Jy ! Component: 150 - total flux cleaned = 0.00454635 Jy ! Component: 200 - total flux cleaned = 0.00569949 Jy ! Total flux subtracted in 200 components = 0.00569949 Jy ! Clean residual min=-0.001097 max=0.001077 Jy/beam ! Clean residual mean=0.000003 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.122725 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 118 components and 0.122725 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=2.686 mas, bpa=8.279 degrees ! Estimated noise=0.559769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016781 Jy ! Component: 100 - total flux cleaned = 0.00288187 Jy ! Component: 150 - total flux cleaned = 0.00353742 Jy ! Component: 200 - total flux cleaned = 0.00413415 Jy ! Total flux subtracted in 200 components = 0.00413415 Jy ! Clean residual min=-0.001081 max=0.000963 Jy/beam ! Clean residual mean=0.000004 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.126859 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517448 Jy ! Component: 100 - total flux cleaned = 0.000920341 Jy ! Component: 150 - total flux cleaned = 0.00125262 Jy ! Component: 200 - total flux cleaned = 0.00154546 Jy ! Total flux subtracted in 200 components = 0.00154546 Jy ! Clean residual min=-0.001006 max=0.000858 Jy/beam ! Clean residual mean=0.000003 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.128404 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 180 components and 0.128404 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9257 mas, bmaj=1.529 mas, bpa=0.8526 degrees ! Estimated noise=0.447286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216202 Jy ! Component: 100 - total flux cleaned = 0.000404763 Jy ! Component: 150 - total flux cleaned = 0.000554432 Jy ! Component: 200 - total flux cleaned = 0.000710651 Jy ! Total flux subtracted in 200 components = 0.000710651 Jy ! Clean residual min=-0.000873 max=0.000828 Jy/beam ! Clean residual mean=0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.129115 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 200 components and 0.129115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052975Jy sigma=0.463508 ! Fit after self-cal, rms=0.052958Jy sigma=0.463426 wmodel J0105+5125_X_map.mod ! Writing 200 model components to file: J0105+5125_X_map.mod wobs J0105+5125_X_uvs.fits ! Writing UV FITS file: J0105+5125_X_uvs.fits wwins J0105+5125_X_map.win ! wwins: Wrote 10 windows to J0105+5125_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.92204e-05 Jy ! Component: 100 - total flux cleaned = -0.000136034 Jy ! Component: 150 - total flux cleaned = -0.000136812 Jy ! Component: 200 - total flux cleaned = -8.49474e-05 Jy ! Component: 250 - total flux cleaned = -8.63291e-06 Jy ! Component: 300 - total flux cleaned = 9.1123e-05 Jy ! Component: 350 - total flux cleaned = 0.000140208 Jy ! Component: 400 - total flux cleaned = 0.000176194 Jy ! Component: 450 - total flux cleaned = 0.000211601 Jy ! Component: 500 - total flux cleaned = 0.000234634 Jy ! Component: 550 - total flux cleaned = 0.00025757 Jy ! Component: 600 - total flux cleaned = 0.000291558 Jy ! Component: 650 - total flux cleaned = 0.000358641 Jy ! Component: 700 - total flux cleaned = 0.000446594 Jy ! Component: 750 - total flux cleaned = 0.000478752 Jy ! Component: 800 - total flux cleaned = 0.000510952 Jy ! Component: 850 - total flux cleaned = 0.00054267 Jy ! Component: 900 - total flux cleaned = 0.000595277 Jy ! Component: 950 - total flux cleaned = 0.000636801 Jy ! Component: 1000 - total flux cleaned = 0.000677853 Jy ! Component: 1050 - total flux cleaned = 0.000749061 Jy ! Component: 1100 - total flux cleaned = 0.000748908 Jy ! Component: 1150 - total flux cleaned = 0.000828758 Jy ! Component: 1200 - total flux cleaned = 0.000858281 Jy ! Component: 1250 - total flux cleaned = 0.000848396 Jy ! Component: 1300 - total flux cleaned = 0.000877564 Jy ! Component: 1350 - total flux cleaned = 0.000925501 Jy ! Component: 1400 - total flux cleaned = 0.000963599 Jy ! Component: 1450 - total flux cleaned = 0.000982555 Jy ! Component: 1500 - total flux cleaned = 0.00102938 Jy ! Component: 1550 - total flux cleaned = 0.00108508 Jy ! Component: 1600 - total flux cleaned = 0.0010851 Jy ! Component: 1650 - total flux cleaned = 0.00112161 Jy ! Component: 1700 - total flux cleaned = 0.00116696 Jy ! Component: 1750 - total flux cleaned = 0.00121191 Jy ! Component: 1800 - total flux cleaned = 0.00122085 Jy ! Component: 1850 - total flux cleaned = 0.00124743 Jy ! Component: 1900 - total flux cleaned = 0.00127392 Jy ! Component: 1950 - total flux cleaned = 0.00130887 Jy ! Component: 2000 - total flux cleaned = 0.00133482 Jy ! Component: 2050 - total flux cleaned = 0.00132605 Jy ! Component: 2100 - total flux cleaned = 0.00135157 Jy ! Component: 2150 - total flux cleaned = 0.00139401 Jy ! Component: 2200 - total flux cleaned = 0.00139402 Jy ! Component: 2250 - total flux cleaned = 0.0014443 Jy ! Component: 2300 - total flux cleaned = 0.00147766 Jy ! Component: 2350 - total flux cleaned = 0.00152723 Jy ! Component: 2400 - total flux cleaned = 0.00155183 Jy ! Component: 2450 - total flux cleaned = 0.00159272 Jy ! Component: 2500 - total flux cleaned = 0.00163334 Jy ! Component: 2550 - total flux cleaned = 0.00165749 Jy ! Component: 2600 - total flux cleaned = 0.00169755 Jy ! Component: 2650 - total flux cleaned = 0.00171344 Jy ! Component: 2700 - total flux cleaned = 0.00176894 Jy ! Component: 2750 - total flux cleaned = 0.00179259 Jy ! Component: 2800 - total flux cleaned = 0.00181598 Jy ! Component: 2850 - total flux cleaned = 0.00183937 Jy ! Component: 2900 - total flux cleaned = 0.00187041 Jy ! Component: 2950 - total flux cleaned = 0.00190125 Jy ! Component: 3000 - total flux cleaned = 0.00193193 Jy ! Component: 3050 - total flux cleaned = 0.00194714 Jy ! Component: 3100 - total flux cleaned = 0.00199268 Jy ! Component: 3150 - total flux cleaned = 0.00199271 Jy ! Component: 3200 - total flux cleaned = 0.00204523 Jy ! Component: 3250 - total flux cleaned = 0.00206766 Jy ! Component: 3300 - total flux cleaned = 0.00205275 Jy ! Component: 3350 - total flux cleaned = 0.00208972 Jy ! Component: 3400 - total flux cleaned = 0.00209705 Jy ! Component: 3450 - total flux cleaned = 0.00211899 Jy ! Component: 3500 - total flux cleaned = 0.00213354 Jy ! Component: 3550 - total flux cleaned = 0.00217703 Jy ! Component: 3600 - total flux cleaned = 0.00218423 Jy ! Component: 3650 - total flux cleaned = 0.00219855 Jy ! Component: 3700 - total flux cleaned = 0.0022128 Jy ! Component: 3750 - total flux cleaned = 0.002227 Jy ! Component: 3800 - total flux cleaned = 0.00226234 Jy ! Component: 3850 - total flux cleaned = 0.00226941 Jy ! Component: 3900 - total flux cleaned = 0.00229742 Jy ! Component: 3950 - total flux cleaned = 0.00227647 Jy ! Component: 4000 - total flux cleaned = 0.00231819 Jy ! Component: 4050 - total flux cleaned = 0.0023389 Jy ! Total flux subtracted in 4096 components = 0.00234583 Jy ! Clean residual min=-0.000444 max=0.000411 Jy/beam ! Clean residual mean=0.000000 rms=0.000113 Jy/beam ! Combined flux in latest and established models = 0.131461 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 490 components and 0.131461 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0105+5125_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9257 x 1.529 at 0.8526 degrees (North through East) ! Clean map min=-0.00061497 max=0.056623 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0105+5125_X_map.fits wmodel /image_prod/ug002_uva//J0105+5125_X_map.mod ! Writing 490 model components to file: /image_prod/ug002_uva//J0105+5125_X_map.mod wobs /image_prod/ug002_uva//J0105+5125_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0105+5125_X_uvs.fits wwins /image_prod/ug002_uva//J0105+5125_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0105+5125_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0566229 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000112306 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.595019 0.595019 1.19004 2.38008 4.76015 9.52031 19.0406 38.0812 76.1625 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.056 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 504.185 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0105+5125_X_dfm.log closed on Wed Mar 4 18:50:31 2020