! Started logfile: /image_prod/ug002_uva//J0102+5824_X_i_dfm.log on Wed Mar 4 18:48:50 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0102+5824_X_i_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0102+5824_X_i_uva.fits ! AN table 1: 11 integrations on 36 of 36 possible baselines. ! AN table 2: 23 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.828431 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 12168 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X_i] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=2.080491Jy sigma=7.892816 ! Fit after self-cal, rms=0.866304Jy sigma=3.181419 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7355 mas, bmaj=0.9445 mas, bpa=-17.32 degrees ! Estimated noise=2.4682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32987 Jy ! Component: 100 - total flux cleaned = 1.62684 Jy ! Total flux subtracted in 100 components = 1.62684 Jy ! Clean residual min=-0.051702 max=0.104285 Jy/beam ! Clean residual mean=0.000040 rms=0.011149 Jy/beam ! Combined flux in latest and established models = 1.62684 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.62684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.366106Jy sigma=1.465090 ! Fit after self-cal, rms=0.366052Jy sigma=1.464978 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114937 Jy ! Component: 100 - total flux cleaned = 0.18495 Jy ! Total flux subtracted in 100 components = 0.18495 Jy ! Clean residual min=-0.049222 max=0.081374 Jy/beam ! Clean residual mean=0.000015 rms=0.009933 Jy/beam ! Combined flux in latest and established models = 1.81179 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 1.81179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.294257Jy sigma=1.287934 ! Fit after self-cal, rms=0.293963Jy sigma=1.286959 ! Inverting map ! Added new window around map position (-1.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0789712 Jy ! Component: 100 - total flux cleaned = 0.127613 Jy ! Total flux subtracted in 100 components = 0.127613 Jy ! Clean residual min=-0.047126 max=0.070629 Jy/beam ! Clean residual mean=-0.000000 rms=0.009116 Jy/beam ! Combined flux in latest and established models = 1.9394 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 1.9394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.264407Jy sigma=1.181595 ! Fit after self-cal, rms=0.261491Jy sigma=1.172138 ! Inverting map ! Added new window around map position (1.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562876 Jy ! Component: 100 - total flux cleaned = 0.0948169 Jy ! Total flux subtracted in 100 components = 0.0948169 Jy ! Clean residual min=-0.043363 max=0.054183 Jy/beam ! Clean residual mean=-0.000011 rms=0.008538 Jy/beam ! Combined flux in latest and established models = 2.03422 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 2.03422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.247425Jy sigma=1.109790 ! Fit after self-cal, rms=0.247170Jy sigma=1.108975 ! Inverting map ! Added new window around map position (1.2, -12.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483813 Jy ! Component: 100 - total flux cleaned = 0.0787475 Jy ! Total flux subtracted in 100 components = 0.0787475 Jy ! Clean residual min=-0.041083 max=0.049090 Jy/beam ! Clean residual mean=-0.000015 rms=0.008216 Jy/beam ! Combined flux in latest and established models = 2.11296 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 47 components and 2.11296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.238421Jy sigma=1.069941 ! Fit after self-cal, rms=0.237512Jy sigma=1.067138 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9105 mas, bmaj=1.133 mas, bpa=-15.34 degrees ! Estimated noise=1.72688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.6, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413028 Jy ! Component: 100 - total flux cleaned = 0.0495186 Jy ! Component: 150 - total flux cleaned = 0.0529959 Jy ! Component: 200 - total flux cleaned = 0.0562018 Jy ! Total flux subtracted in 200 components = 0.0562018 Jy ! Clean residual min=-0.044191 max=0.045827 Jy/beam ! Clean residual mean=-0.000068 rms=0.008580 Jy/beam ! Combined flux in latest and established models = 2.16917 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 2.16917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.225750Jy sigma=1.003685 ! Fit after self-cal, rms=0.225217Jy sigma=1.001456 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9105 x 1.133 at -15.34 degrees (North through East) ! Clean map min=-0.03937 max=1.7123 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.95 KP 1.04 ! LA 1.05 MK 1.02 NL 1.08 OV 0.92 ! SC 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.08 HN 1.16 KP 1.04 ! LA 1.06 MK 1.02 OV 0.91 PT 0.89 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.92 KP 1.05 ! LA 1.04 MK 1.01 NL 1.05 OV 0.93 ! SC 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.03 HN 1.21 KP 1.03 ! LA 1.05 MK 1.02 OV 0.93 PT 0.91 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.93 KP 1.04 ! LA 1.02 MK 1.04 NL 1.08 OV 0.94 ! SC 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.07 HN 1.17 KP 1.03 ! LA 1.03 MK 1.03 OV 0.94 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.94 KP 1.05 ! LA 1.00 MK 0.99 NL 1.09 OV 0.92 ! SC 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.04 HN 1.21 KP 1.05 ! LA 1.01 MK 1.00 OV 0.92 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.94 KP 1.04 ! LA 1.00 MK 1.02 NL 1.05 OV 0.93 ! SC 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.06 HN 1.14 KP 1.02 ! LA 1.01 MK 1.02 OV 0.93 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.95 KP 1.04 ! LA 1.01 MK 1.01 NL 1.05 OV 0.92 ! SC 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.05 HN 1.17 KP 1.05 ! LA 1.01 MK 1.02 OV 0.91 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.93 KP 1.02 ! LA 1.01 MK 1.02 NL 1.04 OV 0.92 ! SC 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.07 HN 1.22 KP 1.02 ! LA 1.02 MK 1.01 OV 0.92 PT 0.90 ! SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.93 KP 1.02 ! LA 1.01 MK 1.02 NL 1.09 OV 0.91 ! SC 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 HN 1.15 KP 1.00 ! LA 1.02 MK 1.02 OV 0.93 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.95 KP 1.01 ! LA 1.01 MK 1.00 NL 1.08 OV 0.93 ! SC 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 HN 1.17 KP 1.03 ! LA 1.01 MK 1.00 OV 0.95 PT 0.91 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.95 KP 1.02 ! LA 1.02 MK 1.01 NL 1.05 OV 0.93 ! SC 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.07 HN 1.16 KP 0.99 ! LA 1.04 MK 1.02 OV 0.93 PT 0.88 ! SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.94 KP 1.02 ! LA 1.02 MK 1.01 NL 1.06 OV 0.93 ! SC 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.06 HN 1.18 KP 1.03 ! LA 1.03 MK 1.02 OV 0.91 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.96 KP 1.02 ! LA 1.01 MK 0.99 NL 1.05 OV 0.92 ! SC 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.07 HN 1.15 KP 1.01 ! LA 1.01 MK 1.02 OV 0.91 PT 0.89 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.225217Jy sigma=1.001456 ! Fit after self-cal, rms=0.212897Jy sigma=0.811003 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9264 mas, bmaj=1.134 mas, bpa=-16.05 degrees ! Estimated noise=1.74499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0220849 Jy ! Component: 100 - total flux cleaned = -0.0296694 Jy ! Component: 150 - total flux cleaned = -0.0351981 Jy ! Component: 200 - total flux cleaned = -0.0385377 Jy ! Total flux subtracted in 200 components = -0.0385377 Jy ! Clean residual min=-0.038809 max=0.033584 Jy/beam ! Clean residual mean=-0.000026 rms=0.006339 Jy/beam ! Combined flux in latest and established models = 2.13063 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 2.13063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.202661Jy sigma=0.781327 ! Fit after self-cal, rms=0.202474Jy sigma=0.780386 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.202474Jy sigma=0.780386 ! Fit after self-cal, rms=0.178167Jy sigma=0.543269 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9296 mas, bmaj=1.128 mas, bpa=-18.14 degrees ! Estimated noise=1.75515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023791 Jy ! Component: 100 - total flux cleaned = -0.00776137 Jy ! Component: 150 - total flux cleaned = -0.0138052 Jy ! Component: 200 - total flux cleaned = -0.0189581 Jy ! Total flux subtracted in 200 components = -0.0189581 Jy ! Clean residual min=-0.022808 max=0.019112 Jy/beam ! Clean residual mean=-0.000002 rms=0.003872 Jy/beam ! Combined flux in latest and established models = 2.11167 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 2.11167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168894Jy sigma=0.514443 ! Fit after self-cal, rms=0.168746Jy sigma=0.513775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00636826 Jy ! Component: 100 - total flux cleaned = -0.012047 Jy ! Component: 150 - total flux cleaned = -0.0148644 Jy ! Component: 200 - total flux cleaned = -0.0179147 Jy ! Total flux subtracted in 200 components = -0.0179147 Jy ! Clean residual min=-0.021666 max=0.019348 Jy/beam ! Clean residual mean=-0.000001 rms=0.003784 Jy/beam ! Combined flux in latest and established models = 2.09376 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 99 components and 2.09376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165212Jy sigma=0.505022 ! Fit after self-cal, rms=0.165156Jy sigma=0.504814 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165156Jy sigma=0.504814 ! Fit after self-cal, rms=0.089280Jy sigma=0.315668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9263 mas, bmaj=1.128 mas, bpa=-18.47 degrees ! Estimated noise=1.75197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0151665 Jy ! Component: 100 - total flux cleaned = -0.0183924 Jy ! Component: 150 - total flux cleaned = -0.0206472 Jy ! Component: 200 - total flux cleaned = -0.021408 Jy ! Total flux subtracted in 200 components = -0.021408 Jy ! Clean residual min=-0.010426 max=0.008461 Jy/beam ! Clean residual mean=-0.000002 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 2.07235 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 2.07235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083456Jy sigma=0.293899 ! Fit after self-cal, rms=0.083101Jy sigma=0.292968 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00365476 Jy ! Component: 100 - total flux cleaned = -0.00533653 Jy ! Component: 150 - total flux cleaned = -0.00595438 Jy ! Component: 200 - total flux cleaned = -0.00680634 Jy ! Total flux subtracted in 200 components = -0.00680634 Jy ! Clean residual min=-0.010105 max=0.007789 Jy/beam ! Clean residual mean=-0.000002 rms=0.001738 Jy/beam ! Combined flux in latest and established models = 2.06554 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 2.06554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080787Jy sigma=0.284473 ! Fit after self-cal, rms=0.080645Jy sigma=0.284156 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080645Jy sigma=0.284156 ! Fit after self-cal, rms=0.078497Jy sigma=0.278362 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.255 mas, bmaj=2.426 mas, bpa=83.72 degrees ! Estimated noise=2.54726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115232 Jy ! Component: 100 - total flux cleaned = -0.0170273 Jy ! Component: 150 - total flux cleaned = -0.0185218 Jy ! Component: 200 - total flux cleaned = -0.0198544 Jy ! Total flux subtracted in 200 components = -0.0198544 Jy ! Clean residual min=-0.009929 max=0.009200 Jy/beam ! Clean residual mean=-0.000000 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 2.04569 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 131 components and 2.04569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076813Jy sigma=0.272961 ! Fit after self-cal, rms=0.076650Jy sigma=0.272408 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00328892 Jy ! Component: 100 - total flux cleaned = -0.00421103 Jy ! Component: 150 - total flux cleaned = -0.00506043 Jy ! Component: 200 - total flux cleaned = -0.00584476 Jy ! Total flux subtracted in 200 components = -0.00584476 Jy ! Clean residual min=-0.009543 max=0.008398 Jy/beam ! Clean residual mean=0.000001 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 2.03984 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 139 components and 2.03984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075936Jy sigma=0.270101 ! Fit after self-cal, rms=0.075890Jy sigma=0.269996 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9253 mas, bmaj=1.128 mas, bpa=-18.51 degrees ! Estimated noise=1.74925 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9253 x 1.128 at -18.51 degrees (North through East) ! Clean map min=-0.012367 max=1.7333 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075890Jy sigma=0.269996 ! Fit after self-cal, rms=0.072379Jy sigma=0.252557 ! Inverting map and beam ! Estimated beam: bmin=0.9244 mas, bmaj=1.128 mas, bpa=-18.64 degrees ! Estimated noise=1.74672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00643858 Jy ! Component: 100 - total flux cleaned = -0.00834536 Jy ! Component: 150 - total flux cleaned = -0.0100008 Jy ! Component: 200 - total flux cleaned = -0.0102321 Jy ! Total flux subtracted in 200 components = -0.0102321 Jy ! Clean residual min=-0.007014 max=0.006675 Jy/beam ! Clean residual mean=0.000001 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 2.02961 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 142 components and 2.02961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069915Jy sigma=0.242805 ! Fit after self-cal, rms=0.069819Jy sigma=0.242594 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126374 Jy ! Component: 100 - total flux cleaned = -0.00104811 Jy ! Component: 150 - total flux cleaned = -0.00124291 Jy ! Component: 200 - total flux cleaned = -0.00124092 Jy ! Total flux subtracted in 200 components = -0.00124092 Jy ! Clean residual min=-0.006629 max=0.006408 Jy/beam ! Clean residual mean=0.000001 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 2.02837 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 144 components and 2.02837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068681Jy sigma=0.238305 ! Fit after self-cal, rms=0.068607Jy sigma=0.238147 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068607Jy sigma=0.238147 ! Fit after self-cal, rms=0.067676Jy sigma=0.235620 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7387 mas, bmaj=0.9408 mas, bpa=-19.58 degrees ! Estimated noise=2.49179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3394 Jy ! Component: 100 - total flux cleaned = 1.64256 Jy ! Component: 150 - total flux cleaned = 1.75869 Jy ! Component: 200 - total flux cleaned = 1.82932 Jy ! Total flux subtracted in 200 components = 1.82932 Jy ! Clean residual min=-0.014117 max=0.037615 Jy/beam ! Clean residual mean=0.000026 rms=0.003099 Jy/beam ! Combined flux in latest and established models = 1.82932 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.82932 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9239 mas, bmaj=1.128 mas, bpa=-18.71 degrees ! Estimated noise=1.74496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073604 Jy ! Component: 100 - total flux cleaned = 0.116328 Jy ! Component: 150 - total flux cleaned = 0.143505 Jy ! Component: 200 - total flux cleaned = 0.16157 Jy ! Total flux subtracted in 200 components = 0.16157 Jy ! Clean residual min=-0.007908 max=0.012062 Jy/beam ! Clean residual mean=0.000014 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 1.99089 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 46 components and 1.99089 Jy ! Inverting map ! Added new window around map position (-0.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132261 Jy ! Component: 100 - total flux cleaned = 0.0192224 Jy ! Component: 150 - total flux cleaned = 0.0221255 Jy ! Component: 200 - total flux cleaned = 0.0237738 Jy ! Total flux subtracted in 200 components = 0.0237738 Jy ! Clean residual min=-0.007616 max=0.007583 Jy/beam ! Clean residual mean=0.000004 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 2.01467 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 64 components and 2.01467 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.256 mas, bmaj=2.425 mas, bpa=83.47 degrees ! Estimated noise=2.544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453876 Jy ! Component: 100 - total flux cleaned = 0.00592269 Jy ! Component: 150 - total flux cleaned = 0.00651259 Jy ! Component: 200 - total flux cleaned = 0.00663856 Jy ! Total flux subtracted in 200 components = 0.00663856 Jy ! Clean residual min=-0.006231 max=0.005507 Jy/beam ! Clean residual mean=0.000004 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 2.02131 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223073 Jy ! Component: 100 - total flux cleaned = 0.000426565 Jy ! Component: 150 - total flux cleaned = 0.000423355 Jy ! Component: 200 - total flux cleaned = 0.000505876 Jy ! Total flux subtracted in 200 components = 0.000505876 Jy ! Clean residual min=-0.006149 max=0.005530 Jy/beam ! Clean residual mean=0.000004 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 2.02181 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 91 components and 2.02181 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9239 mas, bmaj=1.128 mas, bpa=-18.71 degrees ! Estimated noise=1.74496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48012e-05 Jy ! Component: 100 - total flux cleaned = -0.000581627 Jy ! Component: 150 - total flux cleaned = -0.00112883 Jy ! Component: 200 - total flux cleaned = -0.00129668 Jy ! Total flux subtracted in 200 components = -0.00129668 Jy ! Clean residual min=-0.006125 max=0.006077 Jy/beam ! Clean residual mean=0.000002 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 2.02051 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 2.02051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066382Jy sigma=0.230488 ! Fit after self-cal, rms=0.065187Jy sigma=0.225626 wmodel J0102+5824_X_i_map.mod ! Writing 104 model components to file: J0102+5824_X_i_map.mod wobs J0102+5824_X_i_uvs.fits ! Writing UV FITS file: J0102+5824_X_i_uvs.fits wwins J0102+5824_X_i_map.win ! wwins: Wrote 6 windows to J0102+5824_X_i_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000891681 Jy ! Component: 100 - total flux cleaned = -0.001889 Jy ! Component: 150 - total flux cleaned = -0.00309999 Jy ! Component: 200 - total flux cleaned = -0.00371808 Jy ! Component: 250 - total flux cleaned = -0.00422618 Jy ! Component: 300 - total flux cleaned = -0.00439154 Jy ! Component: 350 - total flux cleaned = -0.00431474 Jy ! Component: 400 - total flux cleaned = -0.00424099 Jy ! Component: 450 - total flux cleaned = -0.0043169 Jy ! Component: 500 - total flux cleaned = -0.0041699 Jy ! Component: 550 - total flux cleaned = -0.00409861 Jy ! Component: 600 - total flux cleaned = -0.00374668 Jy ! Component: 650 - total flux cleaned = -0.00360874 Jy ! Component: 700 - total flux cleaned = -0.00347299 Jy ! Component: 750 - total flux cleaned = -0.00334015 Jy ! Component: 800 - total flux cleaned = -0.00340565 Jy ! Component: 850 - total flux cleaned = -0.00353492 Jy ! Component: 900 - total flux cleaned = -0.00353425 Jy ! Component: 950 - total flux cleaned = -0.00347192 Jy ! Component: 1000 - total flux cleaned = -0.00378373 Jy ! Component: 1050 - total flux cleaned = -0.00372218 Jy ! Component: 1100 - total flux cleaned = -0.00396561 Jy ! Component: 1150 - total flux cleaned = -0.00372558 Jy ! Component: 1200 - total flux cleaned = -0.003905 Jy ! Component: 1250 - total flux cleaned = -0.00378757 Jy ! Component: 1300 - total flux cleaned = -0.00390375 Jy ! Component: 1350 - total flux cleaned = -0.00390292 Jy ! Component: 1400 - total flux cleaned = -0.00378879 Jy ! Component: 1450 - total flux cleaned = -0.00361959 Jy ! Component: 1500 - total flux cleaned = -0.00361931 Jy ! Component: 1550 - total flux cleaned = -0.00356505 Jy ! Component: 1600 - total flux cleaned = -0.00383895 Jy ! Component: 1650 - total flux cleaned = -0.00373018 Jy ! Component: 1700 - total flux cleaned = -0.0039457 Jy ! Component: 1750 - total flux cleaned = -0.00373236 Jy ! Component: 1800 - total flux cleaned = -0.00399808 Jy ! Component: 1850 - total flux cleaned = -0.00394557 Jy ! Component: 1900 - total flux cleaned = -0.00399784 Jy ! Component: 1950 - total flux cleaned = -0.00435952 Jy ! Component: 2000 - total flux cleaned = -0.00435926 Jy ! Component: 2050 - total flux cleaned = -0.00420648 Jy ! Component: 2100 - total flux cleaned = -0.00420668 Jy ! Component: 2150 - total flux cleaned = -0.00420731 Jy ! Component: 2200 - total flux cleaned = -0.00415762 Jy ! Component: 2250 - total flux cleaned = -0.00430557 Jy ! Component: 2300 - total flux cleaned = -0.00420784 Jy ! Component: 2350 - total flux cleaned = -0.00420773 Jy ! Component: 2400 - total flux cleaned = -0.00425616 Jy ! Component: 2450 - total flux cleaned = -0.00406465 Jy ! Component: 2500 - total flux cleaned = -0.0041598 Jy ! Component: 2550 - total flux cleaned = -0.00401845 Jy ! Component: 2600 - total flux cleaned = -0.0040653 Jy ! Component: 2650 - total flux cleaned = -0.0040189 Jy ! Component: 2700 - total flux cleaned = -0.00401917 Jy ! Component: 2750 - total flux cleaned = -0.00406501 Jy ! Component: 2800 - total flux cleaned = -0.00410994 Jy ! Component: 2850 - total flux cleaned = -0.00415534 Jy ! Component: 2900 - total flux cleaned = -0.00411014 Jy ! Component: 2950 - total flux cleaned = -0.0040212 Jy ! Component: 3000 - total flux cleaned = -0.00424202 Jy ! Component: 3050 - total flux cleaned = -0.00415437 Jy ! Component: 3100 - total flux cleaned = -0.00432913 Jy ! Component: 3150 - total flux cleaned = -0.00441564 Jy ! Component: 3200 - total flux cleaned = -0.00441495 Jy ! Component: 3250 - total flux cleaned = -0.00445781 Jy ! Component: 3300 - total flux cleaned = -0.00445779 Jy ! Component: 3350 - total flux cleaned = -0.00445762 Jy ! Component: 3400 - total flux cleaned = -0.00454174 Jy ! Component: 3450 - total flux cleaned = -0.00462521 Jy ! Component: 3500 - total flux cleaned = -0.00458393 Jy ! Component: 3550 - total flux cleaned = -0.00470753 Jy ! Component: 3600 - total flux cleaned = -0.00491245 Jy ! Component: 3650 - total flux cleaned = -0.00462752 Jy ! Component: 3700 - total flux cleaned = -0.00483015 Jy ! Component: 3750 - total flux cleaned = -0.00479031 Jy ! Component: 3800 - total flux cleaned = -0.00506987 Jy ! Component: 3850 - total flux cleaned = -0.00498997 Jy ! Component: 3900 - total flux cleaned = -0.00502935 Jy ! Component: 3950 - total flux cleaned = -0.00518621 Jy ! Component: 4000 - total flux cleaned = -0.00514767 Jy ! Component: 4050 - total flux cleaned = -0.00518639 Jy ! Total flux subtracted in 4096 components = -0.00549493 Jy ! Clean residual min=-0.001952 max=0.001924 Jy/beam ! Clean residual mean=0.000002 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 2.01502 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 409 components and 2.01502 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0102+5824_X_i_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9239 x 1.128 at -18.71 degrees (North through East) ! Clean map min=-0.0069992 max=1.7449 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0102+5824_X_i_map.fits wmodel /image_prod/ug002_uva//J0102+5824_X_i_map.mod ! Writing 409 model components to file: /image_prod/ug002_uva//J0102+5824_X_i_map.mod wobs /image_prod/ug002_uva//J0102+5824_X_i_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0102+5824_X_i_uvs.fits wwins /image_prod/ug002_uva//J0102+5824_X_i_map.win ! wwins: Wrote 7 windows to /image_prod/ug002_uva//J0102+5824_X_i_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.74487 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000622988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.107112 0.107112 0.214224 0.428447 0.856895 1.71379 3.42758 6.85516 13.7103 27.4206 54.8413 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.744 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2800.81 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0102+5824_X_i_dfm.log closed on Wed Mar 4 18:48:56 2020