! Started logfile: /image_prod/ug002_uva//J0102+5824_X_h_dfm.log on Wed Mar 4 18:48:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0102+5824_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0102+5824_X_h_uva.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.839506 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 6528 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.087697Jy sigma=7.992079 ! Fit after self-cal, rms=0.820663Jy sigma=3.046503 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.656 mas, bmaj=1.101 mas, bpa=2.437 degrees ! Estimated noise=3.36339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.31723 Jy ! Component: 100 - total flux cleaned = 1.61109 Jy ! Total flux subtracted in 100 components = 1.61109 Jy ! Clean residual min=-0.043037 max=0.102730 Jy/beam ! Clean residual mean=0.000050 rms=0.009470 Jy/beam ! Combined flux in latest and established models = 1.61109 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.61109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.288807Jy sigma=1.023610 ! Fit after self-cal, rms=0.288774Jy sigma=1.023557 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118899 Jy ! Component: 100 - total flux cleaned = 0.191548 Jy ! Total flux subtracted in 100 components = 0.191548 Jy ! Clean residual min=-0.033920 max=0.053166 Jy/beam ! Clean residual mean=0.000027 rms=0.006296 Jy/beam ! Combined flux in latest and established models = 1.80264 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 1.80264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.186090Jy sigma=0.663415 ! Fit after self-cal, rms=0.185928Jy sigma=0.662822 ! Inverting map ! Added new window around map position (-1.2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556973 Jy ! Component: 100 - total flux cleaned = 0.0945587 Jy ! Total flux subtracted in 100 components = 0.0945587 Jy ! Clean residual min=-0.031046 max=0.031753 Jy/beam ! Clean residual mean=0.000016 rms=0.005202 Jy/beam ! Combined flux in latest and established models = 1.8972 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 1.8972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149425Jy sigma=0.539831 ! Fit after self-cal, rms=0.148615Jy sigma=0.536069 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8145 mas, bmaj=1.336 mas, bpa=1.407 degrees ! Estimated noise=2.37016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514529 Jy ! Component: 100 - total flux cleaned = 0.0825743 Jy ! Component: 150 - total flux cleaned = 0.103416 Jy ! Component: 200 - total flux cleaned = 0.117672 Jy ! Total flux subtracted in 200 components = 0.117672 Jy ! Clean residual min=-0.026964 max=0.025593 Jy/beam ! Clean residual mean=0.000008 rms=0.005310 Jy/beam ! Combined flux in latest and established models = 2.01487 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 56 components and 2.01487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124110Jy sigma=0.462204 ! Fit after self-cal, rms=0.123321Jy sigma=0.458641 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8145 x 1.336 at 1.407 degrees (North through East) ! Clean map min=-0.024969 max=1.7368 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 1.02 KP 1.06 ! LA 1.04 MK 1.01 OV 0.95 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.05 KP 1.05 ! LA 1.04 MK 0.98 OV 0.94 PT 0.92 ! SC 0.96 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.02 KP 1.05 ! LA 1.05 MK 0.99 OV 0.94 PT 0.93 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.00 KP 1.05 ! LA 1.04 MK 1.03 OV 0.95 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.01 KP 1.04 ! LA 1.04 MK 1.02 OV 0.95 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.01 KP 1.04 ! LA 1.01 MK 1.01 OV 0.93 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 1.03 ! LA 1.04 MK 1.03 OV 0.93 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.00 KP 1.05 ! LA 1.03 MK 1.03 OV 0.94 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.01 KP 1.03 ! LA 1.02 MK 1.02 OV 0.93 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.01 KP 1.04 ! LA 1.01 MK 1.02 OV 0.93 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.99 KP 1.04 ! LA 1.01 MK 1.06 OV 0.94 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.02 KP 1.05 ! LA 1.00 MK 1.05 OV 0.93 PT 0.90 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.123321Jy sigma=0.458641 ! Fit after self-cal, rms=0.060268Jy sigma=0.229622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8221 mas, bmaj=1.349 mas, bpa=2.559 degrees ! Estimated noise=2.38185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474159 Jy ! Component: 100 - total flux cleaned = 0.00533119 Jy ! Component: 150 - total flux cleaned = 0.00566783 Jy ! Component: 200 - total flux cleaned = 0.00566642 Jy ! Total flux subtracted in 200 components = 0.00566642 Jy ! Clean residual min=-0.005820 max=0.006319 Jy/beam ! Clean residual mean=-0.000014 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 2.02054 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 2.02054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059004Jy sigma=0.224705 ! Fit after self-cal, rms=0.058880Jy sigma=0.224056 ! Inverting map ! Added new window around map position (-10.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463495 Jy ! Component: 100 - total flux cleaned = 0.00637323 Jy ! Component: 150 - total flux cleaned = 0.00728579 Jy ! Component: 200 - total flux cleaned = 0.00762931 Jy ! Total flux subtracted in 200 components = 0.00762931 Jy ! Clean residual min=-0.005610 max=0.005562 Jy/beam ! Clean residual mean=-0.000015 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 2.02817 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 2.02817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058070Jy sigma=0.221119 ! Fit after self-cal, rms=0.058028Jy sigma=0.220862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058028Jy sigma=0.220862 ! Fit after self-cal, rms=0.055473Jy sigma=0.210419 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8222 mas, bmaj=1.348 mas, bpa=2.368 degrees ! Estimated noise=2.38176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175537 Jy ! Component: 100 - total flux cleaned = 0.00165198 Jy ! Component: 150 - total flux cleaned = 0.00165043 Jy ! Component: 200 - total flux cleaned = 0.00164672 Jy ! Total flux subtracted in 200 components = 0.00164672 Jy ! Clean residual min=-0.003384 max=0.004017 Jy/beam ! Clean residual mean=-0.000003 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 2.02982 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 2.02982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055108Jy sigma=0.209103 ! Fit after self-cal, rms=0.055094Jy sigma=0.209008 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030025 Jy ! Component: 100 - total flux cleaned = 0.00373946 Jy ! Component: 150 - total flux cleaned = 0.00382258 Jy ! Component: 200 - total flux cleaned = 0.00374767 Jy ! Total flux subtracted in 200 components = 0.00374767 Jy ! Clean residual min=-0.003269 max=0.002963 Jy/beam ! Clean residual mean=-0.000004 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 2.03356 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 2.03356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054756Jy sigma=0.207804 ! Fit after self-cal, rms=0.054746Jy sigma=0.207777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054746Jy sigma=0.207777 ! Fit after self-cal, rms=0.054676Jy sigma=0.207524 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.822 mas, bmaj=1.348 mas, bpa=2.325 degrees ! Estimated noise=2.38195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017804 Jy ! Component: 100 - total flux cleaned = 0.00193708 Jy ! Component: 150 - total flux cleaned = 0.00186413 Jy ! Component: 200 - total flux cleaned = 0.00186383 Jy ! Total flux subtracted in 200 components = 0.00186383 Jy ! Clean residual min=-0.002879 max=0.002892 Jy/beam ! Clean residual mean=-0.000002 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 2.03543 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 122 components and 2.03543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054479Jy sigma=0.206812 ! Fit after self-cal, rms=0.054480Jy sigma=0.206795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146698 Jy ! Component: 100 - total flux cleaned = 2.03347e-05 Jy ! Component: 150 - total flux cleaned = -3.77644e-05 Jy ! Component: 200 - total flux cleaned = -9.26701e-05 Jy ! Total flux subtracted in 200 components = -9.26701e-05 Jy ! Clean residual min=-0.002759 max=0.002875 Jy/beam ! Clean residual mean=-0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 2.03533 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 128 components and 2.03534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054363Jy sigma=0.206358 ! Fit after self-cal, rms=0.054362Jy sigma=0.206352 ! Inverting map ! Added new window around map position (5, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192297 Jy ! Component: 100 - total flux cleaned = 0.00256093 Jy ! Component: 150 - total flux cleaned = 0.00290355 Jy ! Component: 200 - total flux cleaned = 0.00306355 Jy ! Total flux subtracted in 200 components = 0.00306355 Jy ! Clean residual min=-0.002611 max=0.002488 Jy/beam ! Clean residual mean=-0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 2.0384 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 142 components and 2.0384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054190Jy sigma=0.205687 ! Fit after self-cal, rms=0.054179Jy sigma=0.205664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054179Jy sigma=0.205664 ! Fit after self-cal, rms=0.054134Jy sigma=0.205529 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=2.553 mas, bpa=24.33 degrees ! Estimated noise=3.59206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187367 Jy ! Component: 100 - total flux cleaned = 0.00212475 Jy ! Component: 150 - total flux cleaned = 0.00255076 Jy ! Component: 200 - total flux cleaned = 0.00273845 Jy ! Total flux subtracted in 200 components = 0.00273845 Jy ! Clean residual min=-0.003757 max=0.003216 Jy/beam ! Clean residual mean=-0.000002 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 2.04114 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 153 components and 2.04114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054082Jy sigma=0.205420 ! Fit after self-cal, rms=0.054079Jy sigma=0.205402 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259922 Jy ! Component: 100 - total flux cleaned = 0.000430817 Jy ! Component: 150 - total flux cleaned = 0.000550637 Jy ! Component: 200 - total flux cleaned = 0.000661653 Jy ! Total flux subtracted in 200 components = 0.000661653 Jy ! Clean residual min=-0.003725 max=0.003102 Jy/beam ! Clean residual mean=-0.000003 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 2.0418 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 157 components and 2.0418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054049Jy sigma=0.205327 ! Fit after self-cal, rms=0.054049Jy sigma=0.205323 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.822 mas, bmaj=1.348 mas, bpa=2.293 degrees ! Estimated noise=2.382 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.822 x 1.348 at 2.293 degrees (North through East) ! Clean map min=-0.0035662 max=1.7325 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054049Jy sigma=0.205323 ! Fit after self-cal, rms=0.050755Jy sigma=0.184934 ! Inverting map and beam ! Estimated beam: bmin=0.822 mas, bmaj=1.348 mas, bpa=2.295 degrees ! Estimated noise=2.38185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.13642e-05 Jy ! Component: 100 - total flux cleaned = -0.000149519 Jy ! Component: 150 - total flux cleaned = -0.000204427 Jy ! Component: 200 - total flux cleaned = -0.000306293 Jy ! Total flux subtracted in 200 components = -0.000306293 Jy ! Clean residual min=-0.002423 max=0.002219 Jy/beam ! Clean residual mean=-0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 2.04149 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 166 components and 2.04149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050639Jy sigma=0.184467 ! Fit after self-cal, rms=0.050635Jy sigma=0.184457 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202907 Jy ! Component: 100 - total flux cleaned = -0.000155831 Jy ! Component: 150 - total flux cleaned = -0.000242586 Jy ! Component: 200 - total flux cleaned = -0.000283779 Jy ! Total flux subtracted in 200 components = -0.000283779 Jy ! Clean residual min=-0.002368 max=0.002162 Jy/beam ! Clean residual mean=-0.000000 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 2.04121 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 173 components and 2.04121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050569Jy sigma=0.184176 ! Fit after self-cal, rms=0.050566Jy sigma=0.184174 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050566Jy sigma=0.184174 ! Fit after self-cal, rms=0.050553Jy sigma=0.184118 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6583 mas, bmaj=1.104 mas, bpa=2.275 degrees ! Estimated noise=3.39328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32149 Jy ! Component: 100 - total flux cleaned = 1.61529 Jy ! Component: 150 - total flux cleaned = 1.73032 Jy ! Component: 200 - total flux cleaned = 1.80457 Jy ! Total flux subtracted in 200 components = 1.80457 Jy ! Clean residual min=-0.015828 max=0.040981 Jy/beam ! Clean residual mean=0.000027 rms=0.004204 Jy/beam ! Combined flux in latest and established models = 1.80457 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.80457 Jy ! Inverting map and beam ! Estimated beam: bmin=0.822 mas, bmaj=1.348 mas, bpa=2.272 degrees ! Estimated noise=2.38184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0827368 Jy ! Component: 100 - total flux cleaned = 0.130466 Jy ! Component: 150 - total flux cleaned = 0.15992 Jy ! Component: 200 - total flux cleaned = 0.178794 Jy ! Total flux subtracted in 200 components = 0.178794 Jy ! Clean residual min=-0.005414 max=0.011326 Jy/beam ! Clean residual mean=0.000021 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 1.98336 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 47 components and 1.98336 Jy ! Inverting map ! Added new window around map position (0.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127903 Jy ! Component: 100 - total flux cleaned = 0.021828 Jy ! Component: 150 - total flux cleaned = 0.0286511 Jy ! Component: 200 - total flux cleaned = 0.0342129 Jy ! Total flux subtracted in 200 components = 0.0342129 Jy ! Clean residual min=-0.004413 max=0.004853 Jy/beam ! Clean residual mean=0.000006 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 2.01757 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 68 components and 2.01757 Jy ! Inverting map ! Added new window around map position (-2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051136 Jy ! Component: 100 - total flux cleaned = 0.00808319 Jy ! Component: 150 - total flux cleaned = 0.0108374 Jy ! Component: 200 - total flux cleaned = 0.0131645 Jy ! Total flux subtracted in 200 components = 0.0131645 Jy ! Clean residual min=-0.003782 max=0.003004 Jy/beam ! Clean residual mean=0.000002 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 2.03074 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 85 components and 2.03074 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=2.553 mas, bpa=24.3 degrees ! Estimated noise=3.59176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331037 Jy ! Component: 100 - total flux cleaned = 0.00486825 Jy ! Component: 150 - total flux cleaned = 0.00576221 Jy ! Component: 200 - total flux cleaned = 0.00660707 Jy ! Total flux subtracted in 200 components = 0.00660707 Jy ! Clean residual min=-0.003757 max=0.003163 Jy/beam ! Clean residual mean=0.000002 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 2.03735 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545218 Jy ! Component: 100 - total flux cleaned = 0.00109821 Jy ! Component: 150 - total flux cleaned = 0.00159613 Jy ! Component: 200 - total flux cleaned = 0.00195043 Jy ! Total flux subtracted in 200 components = 0.00195043 Jy ! Clean residual min=-0.003648 max=0.002982 Jy/beam ! Clean residual mean=0.000001 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 2.0393 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 123 components and 2.0393 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.822 mas, bmaj=1.348 mas, bpa=2.272 degrees ! Estimated noise=2.38184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103953 Jy ! Component: 100 - total flux cleaned = -0.00113717 Jy ! Component: 150 - total flux cleaned = -0.00104628 Jy ! Component: 200 - total flux cleaned = -0.00104839 Jy ! Total flux subtracted in 200 components = -0.00104839 Jy ! Clean residual min=-0.003121 max=0.002623 Jy/beam ! Clean residual mean=0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 2.03825 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 143 components and 2.03825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050991Jy sigma=0.186401 ! Fit after self-cal, rms=0.050918Jy sigma=0.186035 wmodel J0102+5824_X_h_map.mod ! Writing 143 model components to file: J0102+5824_X_h_map.mod wobs J0102+5824_X_h_uvs.fits ! Writing UV FITS file: J0102+5824_X_h_uvs.fits wwins J0102+5824_X_h_map.win ! wwins: Wrote 9 windows to J0102+5824_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133401 Jy ! Component: 100 - total flux cleaned = -0.00171245 Jy ! Component: 150 - total flux cleaned = -0.00189211 Jy ! Component: 200 - total flux cleaned = -0.00189234 Jy ! Component: 250 - total flux cleaned = -0.00176935 Jy ! Component: 300 - total flux cleaned = -0.00141161 Jy ! Component: 350 - total flux cleaned = -0.00141267 Jy ! Component: 400 - total flux cleaned = -0.00141342 Jy ! Component: 450 - total flux cleaned = -0.00156184 Jy ! Component: 500 - total flux cleaned = -0.00159841 Jy ! Component: 550 - total flux cleaned = -0.00166987 Jy ! Component: 600 - total flux cleaned = -0.00170438 Jy ! Component: 650 - total flux cleaned = -0.00160113 Jy ! Component: 700 - total flux cleaned = -0.0015679 Jy ! Component: 750 - total flux cleaned = -0.00150186 Jy ! Component: 800 - total flux cleaned = -0.00156785 Jy ! Component: 850 - total flux cleaned = -0.00153454 Jy ! Component: 900 - total flux cleaned = -0.00147011 Jy ! Component: 950 - total flux cleaned = -0.00153261 Jy ! Component: 1000 - total flux cleaned = -0.00147062 Jy ! Component: 1050 - total flux cleaned = -0.00143986 Jy ! Component: 1100 - total flux cleaned = -0.00146947 Jy ! Component: 1150 - total flux cleaned = -0.0014398 Jy ! Component: 1200 - total flux cleaned = -0.00152711 Jy ! Component: 1250 - total flux cleaned = -0.00143985 Jy ! Component: 1300 - total flux cleaned = -0.00141151 Jy ! Component: 1350 - total flux cleaned = -0.00138346 Jy ! Component: 1400 - total flux cleaned = -0.00138355 Jy ! Component: 1450 - total flux cleaned = -0.00132869 Jy ! Component: 1500 - total flux cleaned = -0.00130109 Jy ! Component: 1550 - total flux cleaned = -0.0011942 Jy ! Component: 1600 - total flux cleaned = -0.0011147 Jy ! Component: 1650 - total flux cleaned = -0.00106245 Jy ! Component: 1700 - total flux cleaned = -0.00108871 Jy ! Component: 1750 - total flux cleaned = -0.00106311 Jy ! Component: 1800 - total flux cleaned = -0.000987131 Jy ! Component: 1850 - total flux cleaned = -0.00091193 Jy ! Component: 1900 - total flux cleaned = -0.000837542 Jy ! Component: 1950 - total flux cleaned = -0.000837538 Jy ! Component: 2000 - total flux cleaned = -0.000740216 Jy ! Component: 2050 - total flux cleaned = -0.000715859 Jy ! Component: 2100 - total flux cleaned = -0.000667801 Jy ! Component: 2150 - total flux cleaned = -0.000596255 Jy ! Component: 2200 - total flux cleaned = -0.00043227 Jy ! Component: 2250 - total flux cleaned = -0.000409155 Jy ! Component: 2300 - total flux cleaned = -0.000408961 Jy ! Component: 2350 - total flux cleaned = -0.000272315 Jy ! Component: 2400 - total flux cleaned = -0.000182 Jy ! Component: 2450 - total flux cleaned = -0.000137237 Jy ! Component: 2500 - total flux cleaned = -0.000137493 Jy ! Component: 2550 - total flux cleaned = 1.6461e-05 Jy ! Component: 2600 - total flux cleaned = 3.8263e-05 Jy ! Component: 2650 - total flux cleaned = 0.000103128 Jy ! Component: 2700 - total flux cleaned = 0.00014599 Jy ! Component: 2750 - total flux cleaned = 0.000146008 Jy ! Component: 2800 - total flux cleaned = 0.000230453 Jy ! Component: 2850 - total flux cleaned = 0.000293377 Jy ! Component: 2900 - total flux cleaned = 0.000293547 Jy ! Component: 2950 - total flux cleaned = 0.000396391 Jy ! Component: 3000 - total flux cleaned = 0.000437395 Jy ! Component: 3050 - total flux cleaned = 0.000599456 Jy ! Component: 3100 - total flux cleaned = 0.000498929 Jy ! Component: 3150 - total flux cleaned = 0.00059864 Jy ! Component: 3200 - total flux cleaned = 0.000638243 Jy ! Component: 3250 - total flux cleaned = 0.000775789 Jy ! Component: 3300 - total flux cleaned = 0.000756103 Jy ! Component: 3350 - total flux cleaned = 0.000853085 Jy ! Component: 3400 - total flux cleaned = 0.00089153 Jy ! Component: 3450 - total flux cleaned = 0.000834246 Jy ! Component: 3500 - total flux cleaned = 0.000948189 Jy ! Component: 3550 - total flux cleaned = 0.0010233 Jy ! Component: 3600 - total flux cleaned = 0.00111694 Jy ! Component: 3650 - total flux cleaned = 0.00113563 Jy ! Component: 3700 - total flux cleaned = 0.00120945 Jy ! Component: 3750 - total flux cleaned = 0.00133795 Jy ! Component: 3800 - total flux cleaned = 0.00135614 Jy ! Component: 3850 - total flux cleaned = 0.00142859 Jy ! Component: 3900 - total flux cleaned = 0.0014105 Jy ! Component: 3950 - total flux cleaned = 0.00150008 Jy ! Component: 4000 - total flux cleaned = 0.00148218 Jy ! Component: 4050 - total flux cleaned = 0.00146475 Jy ! Total flux subtracted in 4096 components = 0.00149988 Jy ! Clean residual min=-0.001025 max=0.000910 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 2.03975 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 464 components and 2.03975 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0102+5824_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.822 x 1.348 at 2.272 degrees (North through East) ! Clean map min=-0.0026539 max=1.7358 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0102+5824_X_h_map.fits wmodel /image_prod/ug002_uva//J0102+5824_X_h_map.mod ! Writing 464 model components to file: /image_prod/ug002_uva//J0102+5824_X_h_map.mod wobs /image_prod/ug002_uva//J0102+5824_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0102+5824_X_h_uvs.fits wwins /image_prod/ug002_uva//J0102+5824_X_h_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J0102+5824_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.73583 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000290876 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0502715 0.0502715 0.100543 0.201086 0.402172 0.804344 1.60869 3.21737 6.43475 12.8695 25.739 51.478 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.735 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5967.6 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0102+5824_X_h_dfm.log closed on Wed Mar 4 18:48:49 2020