! Started logfile: /image_prod/ug002_uva//J0102+5824_X_g_dfm.log on Wed Mar 4 18:48:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0102+5824_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0102+5824_X_g_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856296 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 13872 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.837227Jy sigma=8.118604 ! Fit after self-cal, rms=0.573118Jy sigma=2.456301 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6639 mas, bmaj=1.3 mas, bpa=3.843 degrees ! Estimated noise=1.94786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.1433 Jy ! Component: 100 - total flux cleaned = 1.39969 Jy ! Total flux subtracted in 100 components = 1.39969 Jy ! Clean residual min=-0.030863 max=0.088150 Jy/beam ! Clean residual mean=0.000034 rms=0.005956 Jy/beam ! Combined flux in latest and established models = 1.39969 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.39969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.250854Jy sigma=1.038557 ! Fit after self-cal, rms=0.250811Jy sigma=1.038401 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0928339 Jy ! Component: 100 - total flux cleaned = 0.143953 Jy ! Total flux subtracted in 100 components = 0.143953 Jy ! Clean residual min=-0.023433 max=0.061098 Jy/beam ! Clean residual mean=0.000027 rms=0.004624 Jy/beam ! Combined flux in latest and established models = 1.54364 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 1.54364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188427Jy sigma=0.793494 ! Fit after self-cal, rms=0.188251Jy sigma=0.792599 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548426 Jy ! Component: 100 - total flux cleaned = 0.0887465 Jy ! Total flux subtracted in 100 components = 0.0887465 Jy ! Clean residual min=-0.021410 max=0.038727 Jy/beam ! Clean residual mean=0.000021 rms=0.003986 Jy/beam ! Combined flux in latest and established models = 1.63239 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 1.63239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156873Jy sigma=0.667530 ! Fit after self-cal, rms=0.154974Jy sigma=0.658350 ! Inverting map ! Added new window around map position (1.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341853 Jy ! Component: 100 - total flux cleaned = 0.0602863 Jy ! Total flux subtracted in 100 components = 0.0602863 Jy ! Clean residual min=-0.018866 max=0.018617 Jy/beam ! Clean residual mean=0.000016 rms=0.003604 Jy/beam ! Combined flux in latest and established models = 1.69268 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 1.69268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139110Jy sigma=0.595833 ! Fit after self-cal, rms=0.139022Jy sigma=0.595361 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8218 mas, bmaj=1.557 mas, bpa=3.346 degrees ! Estimated noise=1.39531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0374104 Jy ! Component: 100 - total flux cleaned = 0.0638241 Jy ! Component: 150 - total flux cleaned = 0.084132 Jy ! Component: 200 - total flux cleaned = 0.100058 Jy ! Total flux subtracted in 200 components = 0.100058 Jy ! Clean residual min=-0.018300 max=0.015987 Jy/beam ! Clean residual mean=0.000016 rms=0.003635 Jy/beam ! Combined flux in latest and established models = 1.79273 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 73 components and 1.79273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123213Jy sigma=0.536989 ! Fit after self-cal, rms=0.123023Jy sigma=0.536049 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8218 x 1.557 at 3.346 degrees (North through East) ! Clean map min=-0.016887 max=1.4819 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.00 KP 1.05 ! LA 1.03 MK 1.07 NL 1.07 OV 0.93 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.01 KP 1.06 ! LA 1.01 MK 1.07 NL 1.07 OV 0.94 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 1.06 ! LA 1.02 MK 1.08 NL 1.07 OV 0.94 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.01 KP 1.04 ! LA 1.02 MK 1.06 NL 1.07 OV 0.94 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.05 ! LA 1.02 MK 1.06 NL 1.08 OV 0.94 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.99 KP 1.05 ! LA 1.02 MK 1.06 NL 1.06 OV 0.88 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.03 ! LA 1.01 MK 1.06 NL 1.07 OV 0.94 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.06 ! LA 1.02 MK 1.07 NL 1.05 OV 0.92 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.98 KP 1.04 ! LA 1.01 MK 1.06 NL 1.07 OV 0.94 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.00 KP 1.04 ! LA 1.01 MK 1.06 NL 1.05 OV 0.92 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.99 KP 1.05 ! LA 1.00 MK 1.04 NL 1.05 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.98 KP 1.05 ! LA 1.02 MK 1.03 NL 1.06 OV 0.94 ! PT 0.90 SC 0.97 ! ! ! Fit before self-cal, rms=0.123023Jy sigma=0.536049 ! Fit after self-cal, rms=0.068263Jy sigma=0.300806 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8274 mas, bmaj=1.56 mas, bpa=3.687 degrees ! Estimated noise=1.40062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0114007 Jy ! Component: 100 - total flux cleaned = -0.0121013 Jy ! Component: 150 - total flux cleaned = -0.0121216 Jy ! Component: 200 - total flux cleaned = -0.0128222 Jy ! Total flux subtracted in 200 components = -0.0128222 Jy ! Clean residual min=-0.008775 max=0.005648 Jy/beam ! Clean residual mean=-0.000019 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 1.77991 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 1.77991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064594Jy sigma=0.284532 ! Fit after self-cal, rms=0.064547Jy sigma=0.284213 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064547Jy sigma=0.284213 ! Fit after self-cal, rms=0.060775Jy sigma=0.267349 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8262 mas, bmaj=1.558 mas, bpa=3.54 degrees ! Estimated noise=1.40001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00479127 Jy ! Component: 100 - total flux cleaned = -0.00577063 Jy ! Component: 150 - total flux cleaned = -0.00742469 Jy ! Component: 200 - total flux cleaned = -0.00869315 Jy ! Total flux subtracted in 200 components = -0.00869315 Jy ! Clean residual min=-0.006703 max=0.004478 Jy/beam ! Clean residual mean=-0.000014 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 1.77122 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 1.77122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058892Jy sigma=0.259202 ! Fit after self-cal, rms=0.058839Jy sigma=0.258938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016813 Jy ! Component: 100 - total flux cleaned = -0.00105841 Jy ! Component: 150 - total flux cleaned = -0.00202213 Jy ! Component: 200 - total flux cleaned = -0.00289771 Jy ! Total flux subtracted in 200 components = -0.00289771 Jy ! Clean residual min=-0.006230 max=0.004288 Jy/beam ! Clean residual mean=-0.000013 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 1.76832 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 1.76832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058190Jy sigma=0.256047 ! Fit after self-cal, rms=0.058151Jy sigma=0.255865 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058151Jy sigma=0.255865 ! Fit after self-cal, rms=0.056126Jy sigma=0.245441 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8256 mas, bmaj=1.558 mas, bpa=3.52 degrees ! Estimated noise=1.40049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00401283 Jy ! Component: 100 - total flux cleaned = -0.0045449 Jy ! Component: 150 - total flux cleaned = -0.00569736 Jy ! Component: 200 - total flux cleaned = -0.0065395 Jy ! Total flux subtracted in 200 components = -0.0065395 Jy ! Clean residual min=-0.004862 max=0.003617 Jy/beam ! Clean residual mean=-0.000012 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 1.76178 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 1.76178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055162Jy sigma=0.241497 ! Fit after self-cal, rms=0.055132Jy sigma=0.241349 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.75585e-05 Jy ! Component: 100 - total flux cleaned = -0.000582231 Jy ! Component: 150 - total flux cleaned = -0.00106561 Jy ! Component: 200 - total flux cleaned = -0.00159542 Jy ! Total flux subtracted in 200 components = -0.00159542 Jy ! Clean residual min=-0.004647 max=0.003501 Jy/beam ! Clean residual mean=-0.000012 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 1.76019 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 1.76019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054795Jy sigma=0.239909 ! Fit after self-cal, rms=0.054771Jy sigma=0.239801 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054771Jy sigma=0.239801 ! Fit after self-cal, rms=0.054396Jy sigma=0.238414 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.01 mas, bmaj=2.523 mas, bpa=4.465 degrees ! Estimated noise=2.02029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00571062 Jy ! Component: 100 - total flux cleaned = -0.00702424 Jy ! Component: 150 - total flux cleaned = -0.00793291 Jy ! Component: 200 - total flux cleaned = -0.00857901 Jy ! Total flux subtracted in 200 components = -0.00857901 Jy ! Clean residual min=-0.004816 max=0.003505 Jy/beam ! Clean residual mean=-0.000024 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 1.75161 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 118 components and 1.75161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054165Jy sigma=0.237573 ! Fit after self-cal, rms=0.054121Jy sigma=0.237314 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154729 Jy ! Component: 100 - total flux cleaned = -0.000706617 Jy ! Component: 150 - total flux cleaned = -0.00105187 Jy ! Component: 200 - total flux cleaned = -0.00129981 Jy ! Total flux subtracted in 200 components = -0.00129981 Jy ! Clean residual min=-0.004833 max=0.003392 Jy/beam ! Clean residual mean=-0.000022 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 1.75031 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 127 components and 1.75031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054091Jy sigma=0.237176 ! Fit after self-cal, rms=0.054078Jy sigma=0.237105 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8253 mas, bmaj=1.557 mas, bpa=3.543 degrees ! Estimated noise=1.4011 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8253 x 1.557 at 3.543 degrees (North through East) ! Clean map min=-0.0038707 max=1.4902 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054078Jy sigma=0.237105 ! Fit after self-cal, rms=0.051624Jy sigma=0.220263 ! Inverting map and beam ! Estimated beam: bmin=0.8252 mas, bmaj=1.556 mas, bpa=3.548 degrees ! Estimated noise=1.40169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00228415 Jy ! Component: 100 - total flux cleaned = -0.00286127 Jy ! Component: 150 - total flux cleaned = -0.00276458 Jy ! Component: 200 - total flux cleaned = -0.0028529 Jy ! Total flux subtracted in 200 components = -0.0028529 Jy ! Clean residual min=-0.003557 max=0.002869 Jy/beam ! Clean residual mean=-0.000008 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 1.74745 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 1.74745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051146Jy sigma=0.218219 ! Fit after self-cal, rms=0.051127Jy sigma=0.218139 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.80262e-05 Jy ! Component: 100 - total flux cleaned = -0.000230001 Jy ! Component: 150 - total flux cleaned = -0.00037258 Jy ! Component: 200 - total flux cleaned = -0.000504902 Jy ! Total flux subtracted in 200 components = -0.000504902 Jy ! Clean residual min=-0.003372 max=0.002725 Jy/beam ! Clean residual mean=-0.000008 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 1.74695 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 136 components and 1.74695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050932Jy sigma=0.217278 ! Fit after self-cal, rms=0.050918Jy sigma=0.217219 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050918Jy sigma=0.217219 ! Fit after self-cal, rms=0.050753Jy sigma=0.216612 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6657 mas, bmaj=1.301 mas, bpa=4.102 degrees ! Estimated noise=1.96343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14878 Jy ! Component: 100 - total flux cleaned = 1.40553 Jy ! Component: 150 - total flux cleaned = 1.49874 Jy ! Component: 200 - total flux cleaned = 1.55747 Jy ! Total flux subtracted in 200 components = 1.55747 Jy ! Clean residual min=-0.010865 max=0.032467 Jy/beam ! Clean residual mean=0.000012 rms=0.002451 Jy/beam ! Combined flux in latest and established models = 1.55747 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.55747 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8249 mas, bmaj=1.556 mas, bpa=3.566 degrees ! Estimated noise=1.4022 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633795 Jy ! Component: 100 - total flux cleaned = 0.101955 Jy ! Component: 150 - total flux cleaned = 0.126946 Jy ! Component: 200 - total flux cleaned = 0.143681 Jy ! Total flux subtracted in 200 components = 0.143681 Jy ! Clean residual min=-0.003831 max=0.009193 Jy/beam ! Clean residual mean=0.000013 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 1.70115 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 1.70115 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118153 Jy ! Component: 100 - total flux cleaned = 0.0204611 Jy ! Component: 150 - total flux cleaned = 0.0270287 Jy ! Component: 200 - total flux cleaned = 0.0321863 Jy ! Total flux subtracted in 200 components = 0.0321863 Jy ! Clean residual min=-0.003670 max=0.004309 Jy/beam ! Clean residual mean=-0.000002 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 1.73334 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 59 components and 1.73334 Jy ! Inverting map ! Added new window around map position (-2.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385004 Jy ! Component: 100 - total flux cleaned = 0.00491032 Jy ! Component: 150 - total flux cleaned = 0.00575787 Jy ! Component: 200 - total flux cleaned = 0.00667979 Jy ! Total flux subtracted in 200 components = 0.00667979 Jy ! Clean residual min=-0.003447 max=0.003567 Jy/beam ! Clean residual mean=-0.000005 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 1.74002 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 1.74002 Jy ! Inverting map ! Added new window around map position (0, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213 Jy ! Component: 100 - total flux cleaned = 0.00272027 Jy ! Component: 150 - total flux cleaned = 0.00327562 Jy ! Component: 200 - total flux cleaned = 0.00370156 Jy ! Total flux subtracted in 200 components = 0.00370156 Jy ! Clean residual min=-0.003152 max=0.003270 Jy/beam ! Clean residual mean=-0.000007 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 1.74372 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 1.74372 Jy ! Inverting map ! Added new window around map position (-6.4, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296021 Jy ! Component: 100 - total flux cleaned = 0.00364552 Jy ! Component: 150 - total flux cleaned = 0.00401826 Jy ! Component: 200 - total flux cleaned = 0.00437812 Jy ! Total flux subtracted in 200 components = 0.00437812 Jy ! Clean residual min=-0.002867 max=0.003054 Jy/beam ! Clean residual mean=-0.000008 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 1.7481 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 1.7481 Jy ! Inverting map ! Added new window around map position (6, 18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130085 Jy ! Component: 100 - total flux cleaned = 0.00155467 Jy ! Component: 150 - total flux cleaned = 0.00163832 Jy ! Component: 200 - total flux cleaned = 0.00179561 Jy ! Total flux subtracted in 200 components = 0.00179561 Jy ! Clean residual min=-0.002885 max=0.002785 Jy/beam ! Clean residual mean=-0.000008 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 1.7499 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 99 components and 1.7499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.012 mas, bmaj=2.523 mas, bpa=4.615 degrees ! Estimated noise=2.02246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000462442 Jy ! Component: 100 - total flux cleaned = -1.12817e-05 Jy ! Component: 150 - total flux cleaned = -0.00036949 Jy ! Component: 200 - total flux cleaned = -0.000694608 Jy ! Total flux subtracted in 200 components = -0.000694608 Jy ! Clean residual min=-0.004425 max=0.002900 Jy/beam ! Clean residual mean=-0.000022 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 1.7492 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198995 Jy ! Component: 100 - total flux cleaned = -0.000427762 Jy ! Component: 150 - total flux cleaned = -0.000600035 Jy ! Component: 200 - total flux cleaned = -0.000722501 Jy ! Total flux subtracted in 200 components = -0.000722501 Jy ! Clean residual min=-0.004201 max=0.002884 Jy/beam ! Clean residual mean=-0.000022 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 1.74848 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 127 components and 1.74848 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8249 mas, bmaj=1.556 mas, bpa=3.566 degrees ! Estimated noise=1.4022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000639224 Jy ! Component: 100 - total flux cleaned = -0.000490432 Jy ! Component: 150 - total flux cleaned = -0.00049185 Jy ! Component: 200 - total flux cleaned = -0.000355862 Jy ! Total flux subtracted in 200 components = -0.000355862 Jy ! Clean residual min=-0.002950 max=0.002685 Jy/beam ! Clean residual mean=-0.000008 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 1.74812 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 140 components and 1.74812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050229Jy sigma=0.214948 ! Fit after self-cal, rms=0.050105Jy sigma=0.214225 wmodel J0102+5824_X_g_map.mod ! Writing 140 model components to file: J0102+5824_X_g_map.mod wobs J0102+5824_X_g_uvs.fits ! Writing UV FITS file: J0102+5824_X_g_uvs.fits wwins J0102+5824_X_g_map.win ! wwins: Wrote 8 windows to J0102+5824_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.58936e-05 Jy ! Component: 100 - total flux cleaned = 0.000252402 Jy ! Component: 150 - total flux cleaned = 0.000638489 Jy ! Component: 200 - total flux cleaned = 0.00101228 Jy ! Component: 250 - total flux cleaned = 0.00121511 Jy ! Component: 300 - total flux cleaned = 0.00149277 Jy ! Component: 350 - total flux cleaned = 0.00164798 Jy ! Component: 400 - total flux cleaned = 0.00180076 Jy ! Component: 450 - total flux cleaned = 0.00187569 Jy ! Component: 500 - total flux cleaned = 0.00191277 Jy ! Component: 550 - total flux cleaned = 0.0019849 Jy ! Component: 600 - total flux cleaned = 0.00202051 Jy ! Component: 650 - total flux cleaned = 0.00216098 Jy ! Component: 700 - total flux cleaned = 0.00212592 Jy ! Component: 750 - total flux cleaned = 0.00222928 Jy ! Component: 800 - total flux cleaned = 0.0023985 Jy ! Component: 850 - total flux cleaned = 0.00239841 Jy ! Component: 900 - total flux cleaned = 0.00256447 Jy ! Component: 950 - total flux cleaned = 0.00276089 Jy ! Component: 1000 - total flux cleaned = 0.0028252 Jy ! Component: 1050 - total flux cleaned = 0.00292186 Jy ! Component: 1100 - total flux cleaned = 0.00304948 Jy ! Component: 1150 - total flux cleaned = 0.00323839 Jy ! Component: 1200 - total flux cleaned = 0.00345659 Jy ! Component: 1250 - total flux cleaned = 0.00354916 Jy ! Component: 1300 - total flux cleaned = 0.00367151 Jy ! Component: 1350 - total flux cleaned = 0.00397488 Jy ! Component: 1400 - total flux cleaned = 0.00400482 Jy ! Component: 1450 - total flux cleaned = 0.00415424 Jy ! Component: 1500 - total flux cleaned = 0.00433135 Jy ! Component: 1550 - total flux cleaned = 0.00456575 Jy ! Component: 1600 - total flux cleaned = 0.00471102 Jy ! Component: 1650 - total flux cleaned = 0.00488403 Jy ! Component: 1700 - total flux cleaned = 0.00511198 Jy ! Component: 1750 - total flux cleaned = 0.00511177 Jy ! Component: 1800 - total flux cleaned = 0.00525228 Jy ! Component: 1850 - total flux cleaned = 0.00522489 Jy ! Component: 1900 - total flux cleaned = 0.00544589 Jy ! Component: 1950 - total flux cleaned = 0.00550052 Jy ! Component: 2000 - total flux cleaned = 0.00558224 Jy ! Component: 2050 - total flux cleaned = 0.00566315 Jy ! Component: 2100 - total flux cleaned = 0.00579704 Jy ! Component: 2150 - total flux cleaned = 0.00595671 Jy ! Component: 2200 - total flux cleaned = 0.00593016 Jy ! Component: 2250 - total flux cleaned = 0.00606145 Jy ! Component: 2300 - total flux cleaned = 0.00613963 Jy ! Component: 2350 - total flux cleaned = 0.0062172 Jy ! Component: 2400 - total flux cleaned = 0.00639678 Jy ! Component: 2450 - total flux cleaned = 0.00644794 Jy ! Component: 2500 - total flux cleaned = 0.00649884 Jy ! Component: 2550 - total flux cleaned = 0.00672535 Jy ! Component: 2600 - total flux cleaned = 0.00672559 Jy ! Component: 2650 - total flux cleaned = 0.00689942 Jy ! Component: 2700 - total flux cleaned = 0.00694854 Jy ! Component: 2750 - total flux cleaned = 0.00702199 Jy ! Component: 2800 - total flux cleaned = 0.00702172 Jy ! Component: 2850 - total flux cleaned = 0.00711852 Jy ! Component: 2900 - total flux cleaned = 0.00726282 Jy ! Component: 2950 - total flux cleaned = 0.00719126 Jy ! Component: 3000 - total flux cleaned = 0.00728633 Jy ! Component: 3050 - total flux cleaned = 0.00747535 Jy ! Component: 3100 - total flux cleaned = 0.00749904 Jy ! Component: 3150 - total flux cleaned = 0.00759241 Jy ! Component: 3200 - total flux cleaned = 0.00766204 Jy ! Component: 3250 - total flux cleaned = 0.00782344 Jy ! Component: 3300 - total flux cleaned = 0.00782344 Jy ! Component: 3350 - total flux cleaned = 0.00786903 Jy ! Component: 3400 - total flux cleaned = 0.00802766 Jy ! Component: 3450 - total flux cleaned = 0.00811782 Jy ! Component: 3500 - total flux cleaned = 0.00825234 Jy ! Component: 3550 - total flux cleaned = 0.00834136 Jy ! Component: 3600 - total flux cleaned = 0.00847416 Jy ! Component: 3650 - total flux cleaned = 0.00854022 Jy ! Component: 3700 - total flux cleaned = 0.00854002 Jy ! Component: 3750 - total flux cleaned = 0.00858359 Jy ! Component: 3800 - total flux cleaned = 0.00873522 Jy ! Component: 3850 - total flux cleaned = 0.00895057 Jy ! Component: 3900 - total flux cleaned = 0.00901482 Jy ! Component: 3950 - total flux cleaned = 0.00912137 Jy ! Component: 4000 - total flux cleaned = 0.0091428 Jy ! Component: 4050 - total flux cleaned = 0.00929028 Jy ! Total flux subtracted in 4096 components = 0.00939525 Jy ! Clean residual min=-0.001334 max=0.001140 Jy/beam ! Clean residual mean=-0.000003 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 1.75752 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 423 components and 1.75752 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0102+5824_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8249 x 1.556 at 3.566 degrees (North through East) ! Clean map min=-0.0018181 max=1.4962 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0102+5824_X_g_map.fits wmodel /image_prod/ug002_uva//J0102+5824_X_g_map.mod ! Writing 423 model components to file: /image_prod/ug002_uva//J0102+5824_X_g_map.mod wobs /image_prod/ug002_uva//J0102+5824_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0102+5824_X_g_uvs.fits wwins /image_prod/ug002_uva//J0102+5824_X_g_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J0102+5824_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.49615 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00035186 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.070553 0.070553 0.141106 0.282212 0.564424 1.12885 2.2577 4.51539 9.03079 18.0616 36.1231 72.2463 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.496 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4252.12 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0102+5824_X_g_dfm.log closed on Wed Mar 4 18:48:44 2020