! Started logfile: /image_prod/ug002_uva//J0102+5824_X_f_dfm.log on Wed Mar 4 18:48:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0102+5824_X_f_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0102+5824_X_f_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.85 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 11016 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X_f] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.321795Jy sigma=8.055021 ! Fit after self-cal, rms=1.123234Jy sigma=3.836560 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6798 mas, bmaj=1.06 mas, bpa=-6.816 degrees ! Estimated noise=2.79037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57902 Jy ! Component: 100 - total flux cleaned = 1.93344 Jy ! Total flux subtracted in 100 components = 1.93344 Jy ! Clean residual min=-0.058746 max=0.124838 Jy/beam ! Clean residual mean=-0.000030 rms=0.011409 Jy/beam ! Combined flux in latest and established models = 1.93344 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.93344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.349671Jy sigma=1.230534 ! Fit after self-cal, rms=0.349638Jy sigma=1.230357 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12672 Jy ! Component: 100 - total flux cleaned = 0.184336 Jy ! Total flux subtracted in 100 components = 0.184336 Jy ! Clean residual min=-0.052268 max=0.080571 Jy/beam ! Clean residual mean=-0.000025 rms=0.009968 Jy/beam ! Combined flux in latest and established models = 2.11778 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 2.11778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.291916Jy sigma=1.080714 ! Fit after self-cal, rms=0.291763Jy sigma=1.080387 ! Inverting map ! Added new window around map position (-1.8, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0758553 Jy ! Component: 100 - total flux cleaned = 0.112316 Jy ! Total flux subtracted in 100 components = 0.112316 Jy ! Clean residual min=-0.050643 max=0.064913 Jy/beam ! Clean residual mean=-0.000019 rms=0.009272 Jy/beam ! Combined flux in latest and established models = 2.23009 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 2.23009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.267384Jy sigma=1.008548 ! Fit after self-cal, rms=0.265247Jy sigma=1.000827 ! Inverting map ! Added new window around map position (-10, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519293 Jy ! Component: 100 - total flux cleaned = 0.074397 Jy ! Total flux subtracted in 100 components = 0.074397 Jy ! Clean residual min=-0.047465 max=0.050609 Jy/beam ! Clean residual mean=-0.000018 rms=0.008762 Jy/beam ! Combined flux in latest and established models = 2.30449 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 2.30449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.254656Jy sigma=0.959457 ! Fit after self-cal, rms=0.254240Jy sigma=0.957622 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8361 mas, bmaj=1.266 mas, bpa=-6.935 degrees ! Estimated noise=2.02853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382232 Jy ! Component: 100 - total flux cleaned = 0.062239 Jy ! Component: 150 - total flux cleaned = 0.0743221 Jy ! Component: 200 - total flux cleaned = 0.0837272 Jy ! Total flux subtracted in 200 components = 0.0837272 Jy ! Clean residual min=-0.054006 max=0.046698 Jy/beam ! Clean residual mean=-0.000029 rms=0.010358 Jy/beam ! Combined flux in latest and established models = 2.38822 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 2.38822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246471Jy sigma=0.926868 ! Fit after self-cal, rms=0.246246Jy sigma=0.925500 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8361 x 1.266 at -6.935 degrees (North through East) ! Clean map min=-0.052713 max=2.0221 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 1.05 ! LA 1.05 MK 1.04 NL 1.13 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.97 KP 1.04 ! LA 1.04 MK 1.04 NL 1.11 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.97 KP 1.06 ! LA 1.04 MK 1.05 NL 1.13 OV 0.90 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.97 KP 1.06 ! LA 1.01 MK 1.04 NL 1.13 OV 0.91 ! SC 1.00 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.98 KP 1.06 ! LA 1.03 MK 1.04 NL 1.11 OV 0.91 ! SC 0.98 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.97 KP 1.05 ! LA 1.04 MK 1.05 NL 1.14 OV 0.89 ! SC 0.99 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.97 KP 1.05 ! LA 1.06 MK 1.06 NL 1.10 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.98 KP 1.04 ! LA 1.04 MK 1.03 NL 1.12 OV 0.91 ! SC 1.01 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.97 KP 1.07 ! LA 1.03 MK 1.01 NL 1.12 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 1.06 ! LA 1.03 MK 1.05 NL 1.11 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.98 KP 1.06 ! LA 1.06 MK 1.03 NL 1.12 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 0.97 KP 1.05 ! LA 1.05 MK 1.04 NL 1.10 OV 0.89 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.246246Jy sigma=0.925500 ! Fit after self-cal, rms=0.193887Jy sigma=0.724507 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8428 mas, bmaj=1.265 mas, bpa=-6.17 degrees ! Estimated noise=2.0425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540828 Jy ! Component: 100 - total flux cleaned = 0.0105171 Jy ! Component: 150 - total flux cleaned = 0.0131256 Jy ! Component: 200 - total flux cleaned = 0.0154252 Jy ! Total flux subtracted in 200 components = 0.0154252 Jy ! Clean residual min=-0.034348 max=0.033283 Jy/beam ! Clean residual mean=-0.000071 rms=0.007916 Jy/beam ! Combined flux in latest and established models = 2.40364 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 2.40364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.190027Jy sigma=0.711332 ! Fit after self-cal, rms=0.189791Jy sigma=0.710837 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189791Jy sigma=0.710837 ! Fit after self-cal, rms=0.128683Jy sigma=0.435736 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.838 mas, bmaj=1.265 mas, bpa=-5.705 degrees ! Estimated noise=2.04539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0270838 Jy ! Component: 100 - total flux cleaned = -0.029832 Jy ! Component: 150 - total flux cleaned = -0.0323835 Jy ! Component: 200 - total flux cleaned = -0.0348073 Jy ! Total flux subtracted in 200 components = -0.0348073 Jy ! Clean residual min=-0.017983 max=0.016377 Jy/beam ! Clean residual mean=-0.000004 rms=0.004028 Jy/beam ! Combined flux in latest and established models = 2.36883 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 2.36883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119891Jy sigma=0.412691 ! Fit after self-cal, rms=0.118884Jy sigma=0.410024 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0040751 Jy ! Component: 100 - total flux cleaned = -0.00633083 Jy ! Component: 150 - total flux cleaned = -0.00772347 Jy ! Component: 200 - total flux cleaned = -0.008225 Jy ! Total flux subtracted in 200 components = -0.008225 Jy ! Clean residual min=-0.017394 max=0.016070 Jy/beam ! Clean residual mean=-0.000003 rms=0.003976 Jy/beam ! Combined flux in latest and established models = 2.36061 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 2.36061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117066Jy sigma=0.405636 ! Fit after self-cal, rms=0.116826Jy sigma=0.405034 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116826Jy sigma=0.405034 ! Fit after self-cal, rms=0.082394Jy sigma=0.276968 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8364 mas, bmaj=1.264 mas, bpa=-5.641 degrees ! Estimated noise=2.0455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00927786 Jy ! Component: 100 - total flux cleaned = -0.0115106 Jy ! Component: 150 - total flux cleaned = -0.0129015 Jy ! Component: 200 - total flux cleaned = -0.0145768 Jy ! Total flux subtracted in 200 components = -0.0145768 Jy ! Clean residual min=-0.008633 max=0.008121 Jy/beam ! Clean residual mean=0.000002 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 2.34603 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 77 components and 2.34603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079073Jy sigma=0.266902 ! Fit after self-cal, rms=0.078673Jy sigma=0.265777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178107 Jy ! Component: 100 - total flux cleaned = -0.00310087 Jy ! Component: 150 - total flux cleaned = -0.00462268 Jy ! Component: 200 - total flux cleaned = -0.00596095 Jy ! Total flux subtracted in 200 components = -0.00596095 Jy ! Clean residual min=-0.007528 max=0.007746 Jy/beam ! Clean residual mean=0.000002 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 2.34007 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 2.34007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077585Jy sigma=0.262472 ! Fit after self-cal, rms=0.077456Jy sigma=0.262090 ! Inverting map ! Added new window around map position (9, 16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040586 Jy ! Component: 100 - total flux cleaned = 0.00330618 Jy ! Component: 150 - total flux cleaned = 0.00213928 Jy ! Component: 200 - total flux cleaned = 0.000915628 Jy ! Total flux subtracted in 200 components = 0.000915628 Jy ! Clean residual min=-0.006966 max=0.007094 Jy/beam ! Clean residual mean=0.000002 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 2.34099 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 2.34099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076455Jy sigma=0.259096 ! Fit after self-cal, rms=0.076421Jy sigma=0.258940 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076421Jy sigma=0.258940 ! Fit after self-cal, rms=0.075073Jy sigma=0.254428 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.965 mas, bmaj=2.204 mas, bpa=-2.814 degrees ! Estimated noise=3.01465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208343 Jy ! Component: 100 - total flux cleaned = -0.00434513 Jy ! Component: 150 - total flux cleaned = -0.0059923 Jy ! Component: 200 - total flux cleaned = -0.00711418 Jy ! Total flux subtracted in 200 components = -0.00711418 Jy ! Clean residual min=-0.007064 max=0.005853 Jy/beam ! Clean residual mean=0.000006 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 2.33387 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 2.33387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074254Jy sigma=0.252525 ! Fit after self-cal, rms=0.074104Jy sigma=0.251944 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.845e-05 Jy ! Component: 100 - total flux cleaned = -0.000979818 Jy ! Component: 150 - total flux cleaned = -0.00147859 Jy ! Component: 200 - total flux cleaned = -0.00190665 Jy ! Total flux subtracted in 200 components = -0.00190665 Jy ! Clean residual min=-0.006907 max=0.005792 Jy/beam ! Clean residual mean=0.000006 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 2.33197 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 2.33197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073840Jy sigma=0.251375 ! Fit after self-cal, rms=0.073780Jy sigma=0.251115 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8355 mas, bmaj=1.262 mas, bpa=-5.511 degrees ! Estimated noise=2.04707 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8355 x 1.262 at -5.511 degrees (North through East) ! Clean map min=-0.0053016 max=2.0427 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073780Jy sigma=0.251115 ! Fit after self-cal, rms=0.066095Jy sigma=0.216981 ! Inverting map and beam ! Estimated beam: bmin=0.8354 mas, bmaj=1.261 mas, bpa=-5.53 degrees ! Estimated noise=2.04939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726114 Jy ! Component: 100 - total flux cleaned = -3.77399e-05 Jy ! Component: 150 - total flux cleaned = -0.000716657 Jy ! Component: 200 - total flux cleaned = -0.00146604 Jy ! Total flux subtracted in 200 components = -0.00146604 Jy ! Clean residual min=-0.005330 max=0.006217 Jy/beam ! Clean residual mean=0.000002 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 2.3305 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 2.3305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065138Jy sigma=0.213432 ! Fit after self-cal, rms=0.065070Jy sigma=0.213255 ! Inverting map ! Added new window around map position (10.4, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257544 Jy ! Component: 100 - total flux cleaned = 0.00210588 Jy ! Component: 150 - total flux cleaned = 0.00136757 Jy ! Component: 200 - total flux cleaned = 0.000548841 Jy ! Total flux subtracted in 200 components = 0.000548841 Jy ! Clean residual min=-0.005005 max=0.005898 Jy/beam ! Clean residual mean=0.000002 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 2.33105 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 111 components and 2.33105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064239Jy sigma=0.210398 ! Fit after self-cal, rms=0.064203Jy sigma=0.210293 ! Inverting map ! Added new window around map position (-2, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109844 Jy ! Component: 100 - total flux cleaned = 0.000449021 Jy ! Component: 150 - total flux cleaned = 4.8698e-05 Jy ! Component: 200 - total flux cleaned = -0.000835202 Jy ! Total flux subtracted in 200 components = -0.000835202 Jy ! Clean residual min=-0.004852 max=0.005564 Jy/beam ! Clean residual mean=0.000002 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 2.33021 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 2.33021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063431Jy sigma=0.207768 ! Fit after self-cal, rms=0.063413Jy sigma=0.207701 ! Inverting map ! Added new window around map position (-10, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307893 Jy ! Component: 100 - total flux cleaned = 0.00308637 Jy ! Component: 150 - total flux cleaned = 0.00256883 Jy ! Component: 200 - total flux cleaned = 0.00232594 Jy ! Total flux subtracted in 200 components = 0.00232594 Jy ! Clean residual min=-0.004574 max=0.004461 Jy/beam ! Clean residual mean=0.000002 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 2.33254 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 141 components and 2.33254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062754Jy sigma=0.205323 ! Fit after self-cal, rms=0.062726Jy sigma=0.205255 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062726Jy sigma=0.205255 ! Fit after self-cal, rms=0.062220Jy sigma=0.203922 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6765 mas, bmaj=1.061 mas, bpa=-5.792 degrees ! Estimated noise=2.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58226 Jy ! Component: 100 - total flux cleaned = 1.93652 Jy ! Component: 150 - total flux cleaned = 2.06014 Jy ! Component: 200 - total flux cleaned = 2.1276 Jy ! Total flux subtracted in 200 components = 2.1276 Jy ! Clean residual min=-0.012600 max=0.036602 Jy/beam ! Clean residual mean=-0.000007 rms=0.003018 Jy/beam ! Combined flux in latest and established models = 2.1276 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.1276 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=1.261 mas, bpa=-5.415 degrees ! Estimated noise=2.05119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0664016 Jy ! Component: 100 - total flux cleaned = 0.106035 Jy ! Component: 150 - total flux cleaned = 0.131533 Jy ! Component: 200 - total flux cleaned = 0.148676 Jy ! Total flux subtracted in 200 components = 0.148676 Jy ! Clean residual min=-0.005737 max=0.011792 Jy/beam ! Clean residual mean=-0.000002 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 2.27628 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 2.27628 Jy ! Inverting map ! Added new window around map position (-0.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129242 Jy ! Component: 100 - total flux cleaned = 0.0227319 Jy ! Component: 150 - total flux cleaned = 0.0310533 Jy ! Component: 200 - total flux cleaned = 0.0377419 Jy ! Total flux subtracted in 200 components = 0.0377419 Jy ! Clean residual min=-0.005222 max=0.005645 Jy/beam ! Clean residual mean=-0.000001 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 2.31402 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 56 components and 2.31402 Jy ! Inverting map ! Added new window around map position (-1.2, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590312 Jy ! Component: 100 - total flux cleaned = 0.0101406 Jy ! Component: 150 - total flux cleaned = 0.0127187 Jy ! Component: 200 - total flux cleaned = 0.0141108 Jy ! Total flux subtracted in 200 components = 0.0141108 Jy ! Clean residual min=-0.004778 max=0.004858 Jy/beam ! Clean residual mean=-0.000001 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 2.32813 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 74 components and 2.32813 Jy ! Inverting map ! Added new window around map position (-3.2, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119882 Jy ! Component: 100 - total flux cleaned = 0.00173511 Jy ! Component: 150 - total flux cleaned = 0.00207806 Jy ! Component: 200 - total flux cleaned = 0.00240064 Jy ! Total flux subtracted in 200 components = 0.00240064 Jy ! Clean residual min=-0.004440 max=0.004605 Jy/beam ! Clean residual mean=0.000000 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 2.33053 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 90 components and 2.33053 Jy ! Inverting map ! Added new window around map position (1.6, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015176 Jy ! Component: 100 - total flux cleaned = 0.00196863 Jy ! Component: 150 - total flux cleaned = 0.00210854 Jy ! Component: 200 - total flux cleaned = 0.00197164 Jy ! Total flux subtracted in 200 components = 0.00197164 Jy ! Clean residual min=-0.004147 max=0.003962 Jy/beam ! Clean residual mean=0.000001 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 2.3325 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 106 components and 2.3325 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.965 mas, bmaj=2.202 mas, bpa=-2.546 degrees ! Estimated noise=3.02509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274888 Jy ! Component: 100 - total flux cleaned = 0.00381074 Jy ! Component: 150 - total flux cleaned = 0.00457957 Jy ! Component: 200 - total flux cleaned = 0.0041167 Jy ! Total flux subtracted in 200 components = 0.0041167 Jy ! Clean residual min=-0.004397 max=0.004445 Jy/beam ! Clean residual mean=0.000005 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 2.33662 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258967 Jy ! Component: 100 - total flux cleaned = -0.000337232 Jy ! Component: 150 - total flux cleaned = -0.000337999 Jy ! Component: 200 - total flux cleaned = -0.000403871 Jy ! Total flux subtracted in 200 components = -0.000403871 Jy ! Clean residual min=-0.004300 max=0.004222 Jy/beam ! Clean residual mean=0.000006 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 2.33622 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 145 components and 2.33622 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8349 mas, bmaj=1.261 mas, bpa=-5.415 degrees ! Estimated noise=2.05119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000824156 Jy ! Component: 100 - total flux cleaned = 0.00107596 Jy ! Component: 150 - total flux cleaned = 0.000968707 Jy ! Component: 200 - total flux cleaned = 0.000859507 Jy ! Total flux subtracted in 200 components = 0.000859507 Jy ! Clean residual min=-0.004065 max=0.003966 Jy/beam ! Clean residual mean=0.000002 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 2.33708 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 162 components and 2.33708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060874Jy sigma=0.199414 ! Fit after self-cal, rms=0.060502Jy sigma=0.198053 wmodel J0102+5824_X_f_map.mod ! Writing 162 model components to file: J0102+5824_X_f_map.mod wobs J0102+5824_X_f_uvs.fits ! Writing UV FITS file: J0102+5824_X_f_uvs.fits wwins J0102+5824_X_f_map.win ! wwins: Wrote 11 windows to J0102+5824_X_f_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210766 Jy ! Component: 100 - total flux cleaned = 0.000546172 Jy ! Component: 150 - total flux cleaned = 0.000999001 Jy ! Component: 200 - total flux cleaned = 0.00156221 Jy ! Component: 250 - total flux cleaned = 0.00198865 Jy ! Component: 300 - total flux cleaned = 0.00258506 Jy ! Component: 350 - total flux cleaned = 0.00311054 Jy ! Component: 400 - total flux cleaned = 0.00356933 Jy ! Component: 450 - total flux cleaned = 0.00407666 Jy ! Component: 500 - total flux cleaned = 0.00468548 Jy ! Component: 550 - total flux cleaned = 0.00490367 Jy ! Component: 600 - total flux cleaned = 0.00528048 Jy ! Component: 650 - total flux cleaned = 0.0056522 Jy ! Component: 700 - total flux cleaned = 0.00596614 Jy ! Component: 750 - total flux cleaned = 0.00632636 Jy ! Component: 800 - total flux cleaned = 0.00647979 Jy ! Component: 850 - total flux cleaned = 0.00678042 Jy ! Component: 900 - total flux cleaned = 0.00707682 Jy ! Component: 950 - total flux cleaned = 0.00722285 Jy ! Component: 1000 - total flux cleaned = 0.00731909 Jy ! Component: 1050 - total flux cleaned = 0.00760539 Jy ! Component: 1100 - total flux cleaned = 0.00769931 Jy ! Component: 1150 - total flux cleaned = 0.00765295 Jy ! Component: 1200 - total flux cleaned = 0.0078839 Jy ! Component: 1250 - total flux cleaned = 0.00802044 Jy ! Component: 1300 - total flux cleaned = 0.00806493 Jy ! Component: 1350 - total flux cleaned = 0.00824317 Jy ! Component: 1400 - total flux cleaned = 0.00819907 Jy ! Component: 1450 - total flux cleaned = 0.0083302 Jy ! Component: 1500 - total flux cleaned = 0.0083737 Jy ! Component: 1550 - total flux cleaned = 0.00858641 Jy ! Component: 1600 - total flux cleaned = 0.0085446 Jy ! Component: 1650 - total flux cleaned = 0.00871188 Jy ! Component: 1700 - total flux cleaned = 0.00871111 Jy ! Component: 1750 - total flux cleaned = 0.00895686 Jy ! Component: 1800 - total flux cleaned = 0.00899791 Jy ! Component: 1850 - total flux cleaned = 0.00919892 Jy ! Component: 1900 - total flux cleaned = 0.00931887 Jy ! Component: 1950 - total flux cleaned = 0.00955489 Jy ! Component: 2000 - total flux cleaned = 0.00963311 Jy ! Component: 2050 - total flux cleaned = 0.0098273 Jy ! Component: 2100 - total flux cleaned = 0.0100187 Jy ! Component: 2150 - total flux cleaned = 0.010171 Jy ! Component: 2200 - total flux cleaned = 0.0102086 Jy ! Component: 2250 - total flux cleaned = 0.0103961 Jy ! Component: 2300 - total flux cleaned = 0.0104702 Jy ! Component: 2350 - total flux cleaned = 0.0106547 Jy ! Component: 2400 - total flux cleaned = 0.0105814 Jy ! Component: 2450 - total flux cleaned = 0.0107991 Jy ! Component: 2500 - total flux cleaned = 0.0109438 Jy ! Component: 2550 - total flux cleaned = 0.0110507 Jy ! Component: 2600 - total flux cleaned = 0.0110156 Jy ! Component: 2650 - total flux cleaned = 0.0111912 Jy ! Component: 2700 - total flux cleaned = 0.0114 Jy ! Component: 2750 - total flux cleaned = 0.0114002 Jy ! Component: 2800 - total flux cleaned = 0.0115035 Jy ! Component: 2850 - total flux cleaned = 0.0117081 Jy ! Component: 2900 - total flux cleaned = 0.0116405 Jy ! Component: 2950 - total flux cleaned = 0.0119767 Jy ! Component: 3000 - total flux cleaned = 0.0119771 Jy ! Component: 3050 - total flux cleaned = 0.0121757 Jy ! Component: 3100 - total flux cleaned = 0.0121755 Jy ! Component: 3150 - total flux cleaned = 0.0122734 Jy ! Component: 3200 - total flux cleaned = 0.0124356 Jy ! Component: 3250 - total flux cleaned = 0.0125641 Jy ! Component: 3300 - total flux cleaned = 0.0126605 Jy ! Component: 3350 - total flux cleaned = 0.0128511 Jy ! Component: 3400 - total flux cleaned = 0.0128513 Jy ! Component: 3450 - total flux cleaned = 0.0129452 Jy ! Component: 3500 - total flux cleaned = 0.0130696 Jy ! Component: 3550 - total flux cleaned = 0.013193 Jy ! Component: 3600 - total flux cleaned = 0.0133465 Jy ! Component: 3650 - total flux cleaned = 0.0133771 Jy ! Component: 3700 - total flux cleaned = 0.0135286 Jy ! Component: 3750 - total flux cleaned = 0.0136487 Jy ! Component: 3800 - total flux cleaned = 0.0137385 Jy ! Component: 3850 - total flux cleaned = 0.013917 Jy ! Component: 3900 - total flux cleaned = 0.0140647 Jy ! Component: 3950 - total flux cleaned = 0.0141234 Jy ! Component: 4000 - total flux cleaned = 0.0141819 Jy ! Component: 4050 - total flux cleaned = 0.0142397 Jy ! Total flux subtracted in 4096 components = 0.0143551 Jy ! Clean residual min=-0.001718 max=0.001442 Jy/beam ! Clean residual mean=0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 2.35143 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 484 components and 2.35143 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0102+5824_X_f_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8349 x 1.261 at -5.415 degrees (North through East) ! Clean map min=-0.00364 max=2.0523 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0102+5824_X_f_map.fits wmodel /image_prod/ug002_uva//J0102+5824_X_f_map.mod ! Writing 484 model components to file: /image_prod/ug002_uva//J0102+5824_X_f_map.mod wobs /image_prod/ug002_uva//J0102+5824_X_f_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0102+5824_X_f_uvs.fits wwins /image_prod/ug002_uva//J0102+5824_X_f_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J0102+5824_X_f_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.05233 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000478315 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0699179 0.0699179 0.139836 0.279672 0.559343 1.11869 2.23737 4.47475 8.94949 17.899 35.798 71.5959 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.052 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4290.75 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0102+5824_X_f_dfm.log closed on Wed Mar 4 18:48:37 2020