! Started logfile: /image_prod/ug002_uva//J0102+5824_X_e_dfm.log on Wed Mar 4 18:48:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0102+5824_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0102+5824_X_e_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.761686 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 11928 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.355127Jy sigma=8.148107 ! Fit after self-cal, rms=1.133231Jy sigma=3.835708 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6986 mas, bmaj=1.139 mas, bpa=14.01 degrees ! Estimated noise=2.71411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54119 Jy ! Component: 100 - total flux cleaned = 1.89891 Jy ! Total flux subtracted in 100 components = 1.89891 Jy ! Clean residual min=-0.047883 max=0.130566 Jy/beam ! Clean residual mean=0.000167 rms=0.010340 Jy/beam ! Combined flux in latest and established models = 1.89891 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.89891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.365462Jy sigma=1.216841 ! Fit after self-cal, rms=0.365361Jy sigma=1.216631 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134281 Jy ! Component: 100 - total flux cleaned = 0.204009 Jy ! Total flux subtracted in 100 components = 0.204009 Jy ! Clean residual min=-0.040252 max=0.065587 Jy/beam ! Clean residual mean=0.000123 rms=0.008295 Jy/beam ! Combined flux in latest and established models = 2.10292 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 2.10292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.275233Jy sigma=0.940642 ! Fit after self-cal, rms=0.275032Jy sigma=0.939959 ! Inverting map ! Added new window around map position (-1.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700971 Jy ! Component: 100 - total flux cleaned = 0.11332 Jy ! Total flux subtracted in 100 components = 0.11332 Jy ! Clean residual min=-0.039842 max=0.049613 Jy/beam ! Clean residual mean=0.000099 rms=0.007582 Jy/beam ! Combined flux in latest and established models = 2.21624 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 2.21624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.242789Jy sigma=0.841341 ! Fit after self-cal, rms=0.240558Jy sigma=0.832464 ! Inverting map ! Added new window around map position (1.6, -8.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481265 Jy ! Component: 100 - total flux cleaned = 0.0809228 Jy ! Total flux subtracted in 100 components = 0.0809228 Jy ! Clean residual min=-0.035761 max=0.042215 Jy/beam ! Clean residual mean=0.000080 rms=0.007053 Jy/beam ! Combined flux in latest and established models = 2.29716 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 2.29716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.226518Jy sigma=0.787645 ! Fit after self-cal, rms=0.225773Jy sigma=0.784594 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8732 mas, bmaj=1.401 mas, bpa=16.28 degrees ! Estimated noise=1.94835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542195 Jy ! Component: 100 - total flux cleaned = 0.092291 Jy ! Component: 150 - total flux cleaned = 0.121329 Jy ! Component: 200 - total flux cleaned = 0.14405 Jy ! Total flux subtracted in 200 components = 0.14405 Jy ! Clean residual min=-0.029281 max=0.035256 Jy/beam ! Clean residual mean=0.000128 rms=0.007059 Jy/beam ! Combined flux in latest and established models = 2.44121 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 2.44121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.207173Jy sigma=0.725087 ! Fit after self-cal, rms=0.206942Jy sigma=0.724357 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8732 x 1.401 at 16.28 degrees (North through East) ! Clean map min=-0.027412 max=2.0027 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.97 KP 1.08 ! LA 1.01 MK 1.02 NL 1.12 OV 0.93 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.95 KP 1.07 ! LA 1.02 MK 1.00 NL 1.11 OV 0.93 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.96 KP 1.07 ! LA 1.01 MK 1.02 NL 1.12 OV 0.93 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.95 KP 1.05 ! LA 1.03 MK 1.01 NL 1.12 OV 0.92 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.07 ! LA 1.01 MK 1.00 NL 1.09 OV 0.91 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.96 KP 1.08 ! LA 1.03 MK 1.02 NL 1.12 OV 0.92 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.96 KP 1.06 ! LA 1.02 MK 1.01 NL 1.12 OV 0.92 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.97 KP 1.07 ! LA 1.01 MK 1.03 NL 1.11 OV 0.93 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.96 KP 1.05 ! LA 1.00 MK 1.01 NL 1.12 OV 0.91 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.98 KP 1.05 ! LA 1.01 MK 1.01 NL 1.11 OV 0.93 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.97 KP 1.05 ! LA 1.02 MK 0.98 NL 1.10 OV 0.92 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.97 KP 1.08 ! LA 1.03 MK 1.01 NL 1.12 OV 0.92 ! PT 0.91 SC 1.03 ! ! ! Fit before self-cal, rms=0.206942Jy sigma=0.724357 ! Fit after self-cal, rms=0.123974Jy sigma=0.460674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8771 mas, bmaj=1.411 mas, bpa=16.58 degrees ! Estimated noise=1.94798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0256072 Jy ! Component: 100 - total flux cleaned = -0.0404685 Jy ! Component: 150 - total flux cleaned = -0.0477292 Jy ! Component: 200 - total flux cleaned = -0.0524679 Jy ! Total flux subtracted in 200 components = -0.0524679 Jy ! Clean residual min=-0.019107 max=0.018762 Jy/beam ! Clean residual mean=0.000024 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 2.38874 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 2.38874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116575Jy sigma=0.434470 ! Fit after self-cal, rms=0.116370Jy sigma=0.433930 ! Inverting map ! Added new window around map position (-2.8, -30.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322804 Jy ! Component: 100 - total flux cleaned = 0.00336343 Jy ! Component: 150 - total flux cleaned = 0.000506936 Jy ! Component: 200 - total flux cleaned = -0.00124312 Jy ! Total flux subtracted in 200 components = -0.00124312 Jy ! Clean residual min=-0.019377 max=0.018246 Jy/beam ! Clean residual mean=0.000025 rms=0.003195 Jy/beam ! Combined flux in latest and established models = 2.3875 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 92 components and 2.3875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112103Jy sigma=0.415108 ! Fit after self-cal, rms=0.111936Jy sigma=0.414328 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111936Jy sigma=0.414328 ! Fit after self-cal, rms=0.097398Jy sigma=0.345860 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8795 mas, bmaj=1.407 mas, bpa=16.88 degrees ! Estimated noise=1.94661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0142303 Jy ! Component: 100 - total flux cleaned = -0.0202012 Jy ! Component: 150 - total flux cleaned = -0.0242338 Jy ! Component: 200 - total flux cleaned = -0.0272648 Jy ! Total flux subtracted in 200 components = -0.0272648 Jy ! Clean residual min=-0.014227 max=0.012377 Jy/beam ! Clean residual mean=0.000006 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 2.36024 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 2.36024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093505Jy sigma=0.332912 ! Fit after self-cal, rms=0.093218Jy sigma=0.332211 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00294247 Jy ! Component: 100 - total flux cleaned = -0.00572054 Jy ! Component: 150 - total flux cleaned = -0.00779906 Jy ! Component: 200 - total flux cleaned = -0.00930786 Jy ! Total flux subtracted in 200 components = -0.00930786 Jy ! Clean residual min=-0.014010 max=0.012216 Jy/beam ! Clean residual mean=0.000013 rms=0.002337 Jy/beam ! Combined flux in latest and established models = 2.35093 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 119 components and 2.35093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092108Jy sigma=0.328170 ! Fit after self-cal, rms=0.092023Jy sigma=0.327957 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092023Jy sigma=0.327957 ! Fit after self-cal, rms=0.072461Jy sigma=0.249553 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8785 mas, bmaj=1.406 mas, bpa=17.06 degrees ! Estimated noise=1.94534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00432616 Jy ! Component: 100 - total flux cleaned = -0.00691259 Jy ! Component: 150 - total flux cleaned = -0.00857912 Jy ! Component: 200 - total flux cleaned = -0.0102823 Jy ! Total flux subtracted in 200 components = -0.0102823 Jy ! Clean residual min=-0.007672 max=0.007720 Jy/beam ! Clean residual mean=-0.000004 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 2.34065 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 129 components and 2.34065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070196Jy sigma=0.241272 ! Fit after self-cal, rms=0.070042Jy sigma=0.240792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282312 Jy ! Component: 100 - total flux cleaned = -0.000924042 Jy ! Component: 150 - total flux cleaned = -0.00131455 Jy ! Component: 200 - total flux cleaned = -0.00150052 Jy ! Total flux subtracted in 200 components = -0.00150052 Jy ! Clean residual min=-0.007164 max=0.006924 Jy/beam ! Clean residual mean=-0.000003 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 2.33914 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 138 components and 2.33914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068991Jy sigma=0.236968 ! Fit after self-cal, rms=0.068904Jy sigma=0.236769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068904Jy sigma=0.236769 ! Fit after self-cal, rms=0.068240Jy sigma=0.235032 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.159 mas, bmaj=2.614 mas, bpa=31.32 degrees ! Estimated noise=2.7338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00597029 Jy ! Component: 100 - total flux cleaned = -0.00781709 Jy ! Component: 150 - total flux cleaned = -0.00804786 Jy ! Component: 200 - total flux cleaned = -0.00853672 Jy ! Total flux subtracted in 200 components = -0.00853672 Jy ! Clean residual min=-0.004779 max=0.005795 Jy/beam ! Clean residual mean=-0.000005 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 2.33061 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 155 components and 2.33061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067885Jy sigma=0.234105 ! Fit after self-cal, rms=0.067870Jy sigma=0.234037 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504382 Jy ! Component: 100 - total flux cleaned = 0.0078028 Jy ! Component: 150 - total flux cleaned = 0.00879511 Jy ! Component: 200 - total flux cleaned = 0.00932347 Jy ! Total flux subtracted in 200 components = 0.00932347 Jy ! Clean residual min=-0.004700 max=0.005063 Jy/beam ! Clean residual mean=-0.000008 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 2.33993 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 176 components and 2.33993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067435Jy sigma=0.232550 ! Fit after self-cal, rms=0.067424Jy sigma=0.232462 ! Inverting map ! Added new window around map position (9.6, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456502 Jy ! Component: 100 - total flux cleaned = 0.00507346 Jy ! Component: 150 - total flux cleaned = 0.00557341 Jy ! Component: 200 - total flux cleaned = 0.00566429 Jy ! Total flux subtracted in 200 components = 0.00566429 Jy ! Clean residual min=-0.004025 max=0.004398 Jy/beam ! Clean residual mean=-0.000013 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 2.3456 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 199 components and 2.3456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066935Jy sigma=0.230612 ! Fit after self-cal, rms=0.066928Jy sigma=0.230540 ! Inverting map ! Added new window around map position (-8.2, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343938 Jy ! Component: 100 - total flux cleaned = 0.00452622 Jy ! Component: 150 - total flux cleaned = 0.00481473 Jy ! Component: 200 - total flux cleaned = 0.00481878 Jy ! Total flux subtracted in 200 components = 0.00481878 Jy ! Clean residual min=-0.004062 max=0.003960 Jy/beam ! Clean residual mean=-0.000012 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 2.35041 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 224 components and 2.35041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066521Jy sigma=0.229105 ! Fit after self-cal, rms=0.066514Jy sigma=0.229063 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=1.406 mas, bpa=17.15 degrees ! Estimated noise=1.94607 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8782 x 1.406 at 17.15 degrees (North through East) ! Clean map min=-0.008055 max=2.0078 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066514Jy sigma=0.229063 ! Fit after self-cal, rms=0.063992Jy sigma=0.213222 ! Inverting map and beam ! Estimated beam: bmin=0.8785 mas, bmaj=1.406 mas, bpa=17.14 degrees ! Estimated noise=1.94717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139182 Jy ! Component: 100 - total flux cleaned = 0.000964587 Jy ! Component: 150 - total flux cleaned = -0.000274304 Jy ! Component: 200 - total flux cleaned = -0.000466807 Jy ! Total flux subtracted in 200 components = -0.000466807 Jy ! Clean residual min=-0.006090 max=0.005939 Jy/beam ! Clean residual mean=-0.000008 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 2.34995 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 251 components and 2.34995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062735Jy sigma=0.208496 ! Fit after self-cal, rms=0.062681Jy sigma=0.208355 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147302 Jy ! Component: 100 - total flux cleaned = -0.000153951 Jy ! Component: 150 - total flux cleaned = -0.000156787 Jy ! Component: 200 - total flux cleaned = 0.000158473 Jy ! Total flux subtracted in 200 components = 0.000158473 Jy ! Clean residual min=-0.005622 max=0.005509 Jy/beam ! Clean residual mean=-0.000007 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 2.35011 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 260 components and 2.35011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061882Jy sigma=0.205342 ! Fit after self-cal, rms=0.061858Jy sigma=0.205283 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061858Jy sigma=0.205283 ! Fit after self-cal, rms=0.061630Jy sigma=0.204963 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7023 mas, bmaj=1.137 mas, bpa=15.06 degrees ! Estimated noise=2.7352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5528 Jy ! Component: 100 - total flux cleaned = 1.90745 Jy ! Component: 150 - total flux cleaned = 2.03696 Jy ! Component: 200 - total flux cleaned = 2.11306 Jy ! Total flux subtracted in 200 components = 2.11306 Jy ! Clean residual min=-0.015778 max=0.041416 Jy/beam ! Clean residual mean=0.000056 rms=0.003568 Jy/beam ! Combined flux in latest and established models = 2.11306 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 2.11306 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=1.406 mas, bpa=17.16 degrees ! Estimated noise=1.94744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0782156 Jy ! Component: 100 - total flux cleaned = 0.124132 Jy ! Component: 150 - total flux cleaned = 0.152509 Jy ! Component: 200 - total flux cleaned = 0.170726 Jy ! Total flux subtracted in 200 components = 0.170726 Jy ! Clean residual min=-0.006230 max=0.013641 Jy/beam ! Clean residual mean=0.000032 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 2.28379 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 2.28379 Jy ! Inverting map ! Added new window around map position (-2.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138907 Jy ! Component: 100 - total flux cleaned = 0.0237288 Jy ! Component: 150 - total flux cleaned = 0.029602 Jy ! Component: 200 - total flux cleaned = 0.0342757 Jy ! Total flux subtracted in 200 components = 0.0342757 Jy ! Clean residual min=-0.006041 max=0.006609 Jy/beam ! Clean residual mean=0.000010 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 2.31807 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 69 components and 2.31807 Jy ! Inverting map ! Added new window around map position (-2.8, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528898 Jy ! Component: 100 - total flux cleaned = 0.00782055 Jy ! Component: 150 - total flux cleaned = 0.010431 Jy ! Component: 200 - total flux cleaned = 0.0128939 Jy ! Total flux subtracted in 200 components = 0.0128939 Jy ! Clean residual min=-0.005686 max=0.005026 Jy/beam ! Clean residual mean=0.000005 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 2.33096 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 90 components and 2.33096 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.16 mas, bmaj=2.616 mas, bpa=31.38 degrees ! Estimated noise=2.73466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567903 Jy ! Component: 100 - total flux cleaned = 0.00882156 Jy ! Component: 150 - total flux cleaned = 0.0105417 Jy ! Component: 200 - total flux cleaned = 0.0120975 Jy ! Total flux subtracted in 200 components = 0.0120975 Jy ! Clean residual min=-0.003416 max=0.003568 Jy/beam ! Clean residual mean=-0.000003 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 2.34306 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718551 Jy ! Component: 100 - total flux cleaned = 0.00138469 Jy ! Component: 150 - total flux cleaned = 0.00211268 Jy ! Component: 200 - total flux cleaned = 0.00250541 Jy ! Total flux subtracted in 200 components = 0.00250541 Jy ! Clean residual min=-0.003241 max=0.003451 Jy/beam ! Clean residual mean=-0.000006 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 2.34556 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 139 components and 2.34556 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=1.406 mas, bpa=17.16 degrees ! Estimated noise=1.94744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000945859 Jy ! Component: 100 - total flux cleaned = 0.000197096 Jy ! Component: 150 - total flux cleaned = 0.000372429 Jy ! Component: 200 - total flux cleaned = 0.0013989 Jy ! Total flux subtracted in 200 components = 0.0013989 Jy ! Clean residual min=-0.005163 max=0.004764 Jy/beam ! Clean residual mean=-0.000000 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 2.34696 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 163 components and 2.34696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061273Jy sigma=0.205728 ! Fit after self-cal, rms=0.060629Jy sigma=0.202890 wmodel J0102+5824_X_e_map.mod ! Writing 163 model components to file: J0102+5824_X_e_map.mod wobs J0102+5824_X_e_uvs.fits ! Writing UV FITS file: J0102+5824_X_e_uvs.fits wwins J0102+5824_X_e_map.win ! wwins: Wrote 10 windows to J0102+5824_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128273 Jy ! Component: 100 - total flux cleaned = 0.000535697 Jy ! Component: 150 - total flux cleaned = 0.00107983 Jy ! Component: 200 - total flux cleaned = 0.00123076 Jy ! Component: 250 - total flux cleaned = 0.001303 Jy ! Component: 300 - total flux cleaned = 0.00123148 Jy ! Component: 350 - total flux cleaned = 0.00123031 Jy ! Component: 400 - total flux cleaned = 0.00109544 Jy ! Component: 450 - total flux cleaned = 0.00103031 Jy ! Component: 500 - total flux cleaned = 0.000966272 Jy ! Component: 550 - total flux cleaned = 0.000966714 Jy ! Component: 600 - total flux cleaned = 0.00109119 Jy ! Component: 650 - total flux cleaned = 0.00121361 Jy ! Component: 700 - total flux cleaned = 0.0013342 Jy ! Component: 750 - total flux cleaned = 0.00145315 Jy ! Component: 800 - total flux cleaned = 0.00156923 Jy ! Component: 850 - total flux cleaned = 0.00168394 Jy ! Component: 900 - total flux cleaned = 0.00168383 Jy ! Component: 950 - total flux cleaned = 0.00190788 Jy ! Component: 1000 - total flux cleaned = 0.00212774 Jy ! Component: 1050 - total flux cleaned = 0.00212707 Jy ! Component: 1100 - total flux cleaned = 0.00228764 Jy ! Component: 1150 - total flux cleaned = 0.00234082 Jy ! Component: 1200 - total flux cleaned = 0.00239282 Jy ! Component: 1250 - total flux cleaned = 0.00239274 Jy ! Component: 1300 - total flux cleaned = 0.00244385 Jy ! Component: 1350 - total flux cleaned = 0.00254578 Jy ! Component: 1400 - total flux cleaned = 0.00254483 Jy ! Component: 1450 - total flux cleaned = 0.00264512 Jy ! Component: 1500 - total flux cleaned = 0.00284292 Jy ! Component: 1550 - total flux cleaned = 0.00303856 Jy ! Component: 1600 - total flux cleaned = 0.00308712 Jy ! Component: 1650 - total flux cleaned = 0.00318298 Jy ! Component: 1700 - total flux cleaned = 0.00346836 Jy ! Component: 1750 - total flux cleaned = 0.00351534 Jy ! Component: 1800 - total flux cleaned = 0.0037026 Jy ! Component: 1850 - total flux cleaned = 0.00388785 Jy ! Component: 1900 - total flux cleaned = 0.00397921 Jy ! Component: 1950 - total flux cleaned = 0.00388755 Jy ! Component: 2000 - total flux cleaned = 0.00420418 Jy ! Component: 2050 - total flux cleaned = 0.00411518 Jy ! Component: 2100 - total flux cleaned = 0.00429338 Jy ! Component: 2150 - total flux cleaned = 0.00446994 Jy ! Component: 2200 - total flux cleaned = 0.00442574 Jy ! Component: 2250 - total flux cleaned = 0.00460004 Jy ! Component: 2300 - total flux cleaned = 0.00464309 Jy ! Component: 2350 - total flux cleaned = 0.00472889 Jy ! Component: 2400 - total flux cleaned = 0.00472858 Jy ! Component: 2450 - total flux cleaned = 0.00481281 Jy ! Component: 2500 - total flux cleaned = 0.00493856 Jy ! Component: 2550 - total flux cleaned = 0.00498011 Jy ! Component: 2600 - total flux cleaned = 0.00489738 Jy ! Component: 2650 - total flux cleaned = 0.00497952 Jy ! Component: 2700 - total flux cleaned = 0.00498007 Jy ! Component: 2750 - total flux cleaned = 0.00502059 Jy ! Component: 2800 - total flux cleaned = 0.00502062 Jy ! Component: 2850 - total flux cleaned = 0.00502073 Jy ! Component: 2900 - total flux cleaned = 0.00525846 Jy ! Component: 2950 - total flux cleaned = 0.00545505 Jy ! Component: 3000 - total flux cleaned = 0.0051813 Jy ! Component: 3050 - total flux cleaned = 0.00529841 Jy ! Component: 3100 - total flux cleaned = 0.00552961 Jy ! Component: 3150 - total flux cleaned = 0.00537603 Jy ! Component: 3200 - total flux cleaned = 0.00537599 Jy ! Component: 3250 - total flux cleaned = 0.00545157 Jy ! Component: 3300 - total flux cleaned = 0.00530127 Jy ! Component: 3350 - total flux cleaned = 0.00545091 Jy ! Component: 3400 - total flux cleaned = 0.00552495 Jy ! Component: 3450 - total flux cleaned = 0.00534047 Jy ! Component: 3500 - total flux cleaned = 0.00541381 Jy ! Component: 3550 - total flux cleaned = 0.00555929 Jy ! Component: 3600 - total flux cleaned = 0.00559541 Jy ! Component: 3650 - total flux cleaned = 0.00563123 Jy ! Component: 3700 - total flux cleaned = 0.00552407 Jy ! Component: 3750 - total flux cleaned = 0.00570182 Jy ! Component: 3800 - total flux cleaned = 0.00577277 Jy ! Component: 3850 - total flux cleaned = 0.00591286 Jy ! Component: 3900 - total flux cleaned = 0.00594777 Jy ! Component: 3950 - total flux cleaned = 0.0059826 Jy ! Component: 4000 - total flux cleaned = 0.00605128 Jy ! Component: 4050 - total flux cleaned = 0.00618806 Jy ! Total flux subtracted in 4096 components = 0.00625581 Jy ! Clean residual min=-0.001699 max=0.002058 Jy/beam ! Clean residual mean=-0.000000 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 2.35322 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 441 components and 2.35322 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0102+5824_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8782 x 1.406 at 17.16 degrees (North through East) ! Clean map min=-0.0040083 max=2.0188 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0102+5824_X_e_map.fits wmodel /image_prod/ug002_uva//J0102+5824_X_e_map.mod ! Writing 441 model components to file: /image_prod/ug002_uva//J0102+5824_X_e_map.mod wobs /image_prod/ug002_uva//J0102+5824_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0102+5824_X_e_uvs.fits wwins /image_prod/ug002_uva//J0102+5824_X_e_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J0102+5824_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.01885 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000552104 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0820425 0.0820425 0.164085 0.32817 0.65634 1.31268 2.62536 5.25072 10.5014 21.0029 42.0058 84.0115 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.018 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3656.64 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0102+5824_X_e_dfm.log closed on Wed Mar 4 18:48:31 2020