! Started logfile: /image_prod/ug002_uva//J0102+5824_X_d_dfm.log on Wed Mar 4 18:48:19 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0102+5824_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0102+5824_X_d_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.738697 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 11568 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.234522Jy sigma=8.071187 ! Fit after self-cal, rms=1.024785Jy sigma=3.581304 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7344 mas, bmaj=0.9997 mas, bpa=13.04 degrees ! Estimated noise=2.67988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48006 Jy ! Component: 100 - total flux cleaned = 1.80686 Jy ! Total flux subtracted in 100 components = 1.80686 Jy ! Clean residual min=-0.040324 max=0.105723 Jy/beam ! Clean residual mean=0.000128 rms=0.008762 Jy/beam ! Combined flux in latest and established models = 1.80686 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.80686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.333874Jy sigma=1.132950 ! Fit after self-cal, rms=0.333812Jy sigma=1.132891 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111261 Jy ! Component: 100 - total flux cleaned = 0.171094 Jy ! Total flux subtracted in 100 components = 0.171094 Jy ! Clean residual min=-0.041544 max=0.048278 Jy/beam ! Clean residual mean=0.000090 rms=0.007544 Jy/beam ! Combined flux in latest and established models = 1.97795 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 1.97795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.262799Jy sigma=0.934236 ! Fit after self-cal, rms=0.262449Jy sigma=0.932726 ! Inverting map ! Added new window around map position (-2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490693 Jy ! Component: 100 - total flux cleaned = 0.0855863 Jy ! Total flux subtracted in 100 components = 0.0855863 Jy ! Clean residual min=-0.041149 max=0.037356 Jy/beam ! Clean residual mean=0.000071 rms=0.007189 Jy/beam ! Combined flux in latest and established models = 2.06354 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 2.06354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.241979Jy sigma=0.880836 ! Fit after self-cal, rms=0.241640Jy sigma=0.879139 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8949 mas, bmaj=1.204 mas, bpa=12.39 degrees ! Estimated noise=1.89599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613636 Jy ! Component: 100 - total flux cleaned = 0.104522 Jy ! Component: 150 - total flux cleaned = 0.13769 Jy ! Component: 200 - total flux cleaned = 0.164049 Jy ! Total flux subtracted in 200 components = 0.164049 Jy ! Clean residual min=-0.039227 max=0.037282 Jy/beam ! Clean residual mean=0.000127 rms=0.007905 Jy/beam ! Combined flux in latest and established models = 2.22759 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 2.22759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215378Jy sigma=0.815294 ! Fit after self-cal, rms=0.214395Jy sigma=0.811803 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8949 x 1.204 at 12.39 degrees (North through East) ! Clean map min=-0.035761 max=1.9331 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 1.05 ! LA 1.00 MK 1.02 NL 1.10 OV 1.01 ! PT 0.88 SC 1.07 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.96 KP 1.02 ! LA 1.00 MK 0.98 NL 1.11 OV 0.99 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.97 KP 1.02 ! LA 0.97 MK 1.02 NL 1.09 OV 1.00 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.01 KP 1.00 ! LA 1.02 MK 1.00 NL 1.07 OV 1.02 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.96 KP 1.02 ! LA 0.98 MK 0.98 NL 1.10 OV 0.99 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.93 KP 1.02 ! LA 0.94 MK 0.99 NL 1.11 OV 1.00 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.94 KP 1.01 ! LA 0.95 MK 1.07 NL 1.12 OV 0.98 ! PT 0.87 SC 1.02 ! ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.95 KP 1.03 ! LA 0.99 MK 0.97 NL 1.08 OV 1.03 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.99 KP 0.99 ! LA 0.99 MK 0.97 NL 1.07 OV 0.98 ! PT 0.89 SC 1.06 ! ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.97 KP 1.01 ! LA 0.96 MK 1.03 NL 1.11 OV 1.00 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.95 KP 1.01 ! LA 0.98 MK 0.98 NL 1.06 OV 0.97 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 0.98 KP 1.01 ! LA 0.97 MK 1.02 NL 1.10 OV 1.01 ! PT 0.88 SC 1.01 ! ! ! Fit before self-cal, rms=0.214395Jy sigma=0.811803 ! Fit after self-cal, rms=0.166471Jy sigma=0.650750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9007 mas, bmaj=1.214 mas, bpa=12.49 degrees ! Estimated noise=1.90271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297621 Jy ! Component: 100 - total flux cleaned = 0.00108171 Jy ! Component: 150 - total flux cleaned = -0.00049382 Jy ! Component: 200 - total flux cleaned = -0.000921612 Jy ! Total flux subtracted in 200 components = -0.000921612 Jy ! Clean residual min=-0.027436 max=0.028041 Jy/beam ! Clean residual mean=-0.000023 rms=0.006088 Jy/beam ! Combined flux in latest and established models = 2.22667 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 2.22667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.162431Jy sigma=0.638390 ! Fit after self-cal, rms=0.162240Jy sigma=0.637680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.162240Jy sigma=0.637680 ! Fit after self-cal, rms=0.136936Jy sigma=0.448699 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8997 mas, bmaj=1.214 mas, bpa=12.53 degrees ! Estimated noise=1.90302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227019 Jy ! Component: 100 - total flux cleaned = 0.00461193 Jy ! Component: 150 - total flux cleaned = 0.0064838 Jy ! Component: 200 - total flux cleaned = 0.00679997 Jy ! Total flux subtracted in 200 components = 0.00679997 Jy ! Clean residual min=-0.017046 max=0.017977 Jy/beam ! Clean residual mean=-0.000032 rms=0.003938 Jy/beam ! Combined flux in latest and established models = 2.23347 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 2.23347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133638Jy sigma=0.439528 ! Fit after self-cal, rms=0.133455Jy sigma=0.438773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.6, -15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586568 Jy ! Component: 100 - total flux cleaned = 0.00621841 Jy ! Component: 150 - total flux cleaned = 0.00696332 Jy ! Component: 200 - total flux cleaned = 0.00607674 Jy ! Total flux subtracted in 200 components = 0.00607674 Jy ! Clean residual min=-0.016768 max=0.017401 Jy/beam ! Clean residual mean=-0.000031 rms=0.003811 Jy/beam ! Combined flux in latest and established models = 2.23955 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 2.23954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130269Jy sigma=0.429028 ! Fit after self-cal, rms=0.130157Jy sigma=0.428329 ! Inverting map ! Added new window around map position (-15, -39.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00825751 Jy ! Component: 100 - total flux cleaned = 0.00752296 Jy ! Component: 150 - total flux cleaned = 0.00786939 Jy ! Component: 200 - total flux cleaned = 0.00756103 Jy ! Total flux subtracted in 200 components = 0.00756103 Jy ! Clean residual min=-0.016019 max=0.015790 Jy/beam ! Clean residual mean=-0.000027 rms=0.003688 Jy/beam ! Combined flux in latest and established models = 2.24711 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 114 components and 2.24711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127227Jy sigma=0.418500 ! Fit after self-cal, rms=0.127075Jy sigma=0.417819 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127075Jy sigma=0.417819 ! Fit after self-cal, rms=0.070342Jy sigma=0.247624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8999 mas, bmaj=1.213 mas, bpa=12.65 degrees ! Estimated noise=1.9033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309182 Jy ! Component: 100 - total flux cleaned = -0.00555526 Jy ! Component: 150 - total flux cleaned = -0.00726699 Jy ! Component: 200 - total flux cleaned = -0.00823577 Jy ! Total flux subtracted in 200 components = -0.00823577 Jy ! Clean residual min=-0.005342 max=0.005971 Jy/beam ! Clean residual mean=-0.000004 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 2.23887 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 123 components and 2.23887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067362Jy sigma=0.237994 ! Fit after self-cal, rms=0.067073Jy sigma=0.237184 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104231 Jy ! Component: 100 - total flux cleaned = 0.00058511 Jy ! Component: 150 - total flux cleaned = 0.000391384 Jy ! Component: 200 - total flux cleaned = 0.000398052 Jy ! Total flux subtracted in 200 components = 0.000398052 Jy ! Clean residual min=-0.004595 max=0.005376 Jy/beam ! Clean residual mean=-0.000004 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 2.23927 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 2.23927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065780Jy sigma=0.233056 ! Fit after self-cal, rms=0.065683Jy sigma=0.232837 ! Inverting map ! Added new window around map position (-8, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164849 Jy ! Component: 100 - total flux cleaned = 0.00164857 Jy ! Component: 150 - total flux cleaned = 0.00118695 Jy ! Component: 200 - total flux cleaned = 0.00104313 Jy ! Total flux subtracted in 200 components = 0.00104313 Jy ! Clean residual min=-0.004261 max=0.004969 Jy/beam ! Clean residual mean=-0.000003 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 2.24031 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 137 components and 2.24031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064912Jy sigma=0.230340 ! Fit after self-cal, rms=0.064862Jy sigma=0.230228 ! Inverting map ! Added new window around map position (-3.6, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243064 Jy ! Component: 100 - total flux cleaned = 0.00215919 Jy ! Component: 150 - total flux cleaned = 0.00203134 Jy ! Component: 200 - total flux cleaned = 0.00226372 Jy ! Total flux subtracted in 200 components = 0.00226372 Jy ! Clean residual min=-0.004151 max=0.004252 Jy/beam ! Clean residual mean=-0.000006 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 2.24257 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 146 components and 2.24257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064320Jy sigma=0.228324 ! Fit after self-cal, rms=0.064283Jy sigma=0.228237 ! Inverting map ! Added new window around map position (-9.2, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284432 Jy ! Component: 100 - total flux cleaned = 0.00331114 Jy ! Component: 150 - total flux cleaned = 0.00383639 Jy ! Component: 200 - total flux cleaned = 0.00403652 Jy ! Total flux subtracted in 200 components = 0.00403652 Jy ! Clean residual min=-0.003989 max=0.003914 Jy/beam ! Clean residual mean=-0.000005 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 2.24661 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 158 components and 2.24661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063900Jy sigma=0.226796 ! Fit after self-cal, rms=0.063872Jy sigma=0.226748 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063872Jy sigma=0.226748 ! Fit after self-cal, rms=0.063045Jy sigma=0.224416 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.041 mas, bmaj=2.231 mas, bpa=20.29 degrees ! Estimated noise=2.78943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000460759 Jy ! Component: 100 - total flux cleaned = -0.000882854 Jy ! Component: 150 - total flux cleaned = -0.000772792 Jy ! Component: 200 - total flux cleaned = -0.000449866 Jy ! Total flux subtracted in 200 components = -0.000449866 Jy ! Clean residual min=-0.004456 max=0.004050 Jy/beam ! Clean residual mean=-0.000003 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 2.24616 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 165 components and 2.24616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062702Jy sigma=0.223370 ! Fit after self-cal, rms=0.062654Jy sigma=0.223261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.19125e-06 Jy ! Component: 100 - total flux cleaned = 0.000376718 Jy ! Component: 150 - total flux cleaned = 0.000714338 Jy ! Component: 200 - total flux cleaned = 0.00110195 Jy ! Total flux subtracted in 200 components = 0.00110195 Jy ! Clean residual min=-0.004182 max=0.003895 Jy/beam ! Clean residual mean=-0.000003 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 2.24726 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 172 components and 2.24726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062544Jy sigma=0.222982 ! Fit after self-cal, rms=0.062518Jy sigma=0.222939 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8993 mas, bmaj=1.212 mas, bpa=12.64 degrees ! Estimated noise=1.9032 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8993 x 1.212 at 12.64 degrees (North through East) ! Clean map min=-0.0068796 max=1.9319 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062518Jy sigma=0.222939 ! Fit after self-cal, rms=0.059579Jy sigma=0.205627 ! Inverting map and beam ! Estimated beam: bmin=0.8991 mas, bmaj=1.212 mas, bpa=12.64 degrees ! Estimated noise=1.90307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134835 Jy ! Component: 100 - total flux cleaned = -0.000484697 Jy ! Component: 150 - total flux cleaned = -0.000693533 Jy ! Component: 200 - total flux cleaned = -0.000693837 Jy ! Total flux subtracted in 200 components = -0.000693837 Jy ! Clean residual min=-0.003596 max=0.003595 Jy/beam ! Clean residual mean=-0.000003 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 2.24657 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 178 components and 2.24657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059211Jy sigma=0.204256 ! Fit after self-cal, rms=0.059167Jy sigma=0.204179 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285527 Jy ! Component: 100 - total flux cleaned = -0.000470399 Jy ! Component: 150 - total flux cleaned = -0.00055574 Jy ! Component: 200 - total flux cleaned = -0.000638014 Jy ! Total flux subtracted in 200 components = -0.000638014 Jy ! Clean residual min=-0.003480 max=0.003543 Jy/beam ! Clean residual mean=-0.000003 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 2.24593 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 187 components and 2.24593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058939Jy sigma=0.203291 ! Fit after self-cal, rms=0.058912Jy sigma=0.203255 ! Inverting map ! Added new window around map position (3.4, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127789 Jy ! Component: 100 - total flux cleaned = 0.00117527 Jy ! Component: 150 - total flux cleaned = 0.00117034 Jy ! Component: 200 - total flux cleaned = 0.00125228 Jy ! Total flux subtracted in 200 components = 0.00125228 Jy ! Clean residual min=-0.003111 max=0.003390 Jy/beam ! Clean residual mean=-0.000003 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 2.24718 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 199 components and 2.24718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058609Jy sigma=0.202091 ! Fit after self-cal, rms=0.058579Jy sigma=0.202037 ! Inverting map ! Added new window around map position (8.2, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237669 Jy ! Component: 100 - total flux cleaned = 0.0023772 Jy ! Component: 150 - total flux cleaned = 0.00237611 Jy ! Component: 200 - total flux cleaned = 0.00230268 Jy ! Total flux subtracted in 200 components = 0.00230268 Jy ! Clean residual min=-0.003016 max=0.003084 Jy/beam ! Clean residual mean=-0.000004 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 2.24949 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 209 components and 2.24949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058352Jy sigma=0.201168 ! Fit after self-cal, rms=0.058339Jy sigma=0.201140 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058339Jy sigma=0.201140 ! Fit after self-cal, rms=0.058237Jy sigma=0.200894 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7349 mas, bmaj=1.003 mas, bpa=13.03 degrees ! Estimated noise=2.69769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48614 Jy ! Component: 100 - total flux cleaned = 1.81607 Jy ! Component: 150 - total flux cleaned = 1.93278 Jy ! Component: 200 - total flux cleaned = 2.00251 Jy ! Total flux subtracted in 200 components = 2.00251 Jy ! Clean residual min=-0.014714 max=0.038846 Jy/beam ! Clean residual mean=0.000052 rms=0.003185 Jy/beam ! Combined flux in latest and established models = 2.00251 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 2.00251 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8989 mas, bmaj=1.211 mas, bpa=12.66 degrees ! Estimated noise=1.90319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0724903 Jy ! Component: 100 - total flux cleaned = 0.116238 Jy ! Component: 150 - total flux cleaned = 0.145205 Jy ! Component: 200 - total flux cleaned = 0.165077 Jy ! Total flux subtracted in 200 components = 0.165077 Jy ! Clean residual min=-0.005651 max=0.011020 Jy/beam ! Clean residual mean=0.000030 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 2.16758 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 45 components and 2.16758 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140213 Jy ! Component: 100 - total flux cleaned = 0.0242059 Jy ! Component: 150 - total flux cleaned = 0.0322344 Jy ! Component: 200 - total flux cleaned = 0.0385926 Jy ! Total flux subtracted in 200 components = 0.0385926 Jy ! Clean residual min=-0.004581 max=0.005506 Jy/beam ! Clean residual mean=0.000009 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 2.20618 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 63 components and 2.20618 Jy ! Inverting map ! Added new window around map position (-2, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513597 Jy ! Component: 100 - total flux cleaned = 0.00948094 Jy ! Component: 150 - total flux cleaned = 0.0123203 Jy ! Component: 200 - total flux cleaned = 0.0147872 Jy ! Total flux subtracted in 200 components = 0.0147872 Jy ! Clean residual min=-0.004311 max=0.004349 Jy/beam ! Clean residual mean=0.000003 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 2.22096 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 2.22096 Jy ! Inverting map ! Added new window around map position (6.2, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343561 Jy ! Component: 100 - total flux cleaned = 0.00563805 Jy ! Component: 150 - total flux cleaned = 0.00785216 Jy ! Component: 200 - total flux cleaned = 0.00994365 Jy ! Total flux subtracted in 200 components = 0.00994365 Jy ! Clean residual min=-0.004124 max=0.003661 Jy/beam ! Clean residual mean=-0.000000 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 2.23091 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 86 components and 2.23091 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.041 mas, bmaj=2.231 mas, bpa=20.31 degrees ! Estimated noise=2.79127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418452 Jy ! Component: 100 - total flux cleaned = 0.00683654 Jy ! Component: 150 - total flux cleaned = 0.008568 Jy ! Component: 200 - total flux cleaned = 0.0100088 Jy ! Total flux subtracted in 200 components = 0.0100088 Jy ! Clean residual min=-0.003408 max=0.003391 Jy/beam ! Clean residual mean=-0.000006 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 2.24092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141091 Jy ! Component: 100 - total flux cleaned = 0.00245189 Jy ! Component: 150 - total flux cleaned = 0.00334009 Jy ! Component: 200 - total flux cleaned = 0.00424595 Jy ! Total flux subtracted in 200 components = 0.00424595 Jy ! Clean residual min=-0.003267 max=0.003198 Jy/beam ! Clean residual mean=-0.000008 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 2.24516 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 136 components and 2.24516 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8989 mas, bmaj=1.211 mas, bpa=12.66 degrees ! Estimated noise=1.90319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614863 Jy ! Component: 100 - total flux cleaned = 0.00155383 Jy ! Component: 150 - total flux cleaned = 0.00188436 Jy ! Component: 200 - total flux cleaned = 0.0025085 Jy ! Total flux subtracted in 200 components = 0.0025085 Jy ! Clean residual min=-0.003649 max=0.003079 Jy/beam ! Clean residual mean=-0.000003 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 2.24767 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 148 components and 2.24767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058565Jy sigma=0.202588 ! Fit after self-cal, rms=0.058173Jy sigma=0.200782 wmodel J0102+5824_X_d_map.mod ! Writing 148 model components to file: J0102+5824_X_d_map.mod wobs J0102+5824_X_d_uvs.fits ! Writing UV FITS file: J0102+5824_X_d_uvs.fits wwins J0102+5824_X_d_map.win ! wwins: Wrote 13 windows to J0102+5824_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154862 Jy ! Component: 100 - total flux cleaned = -0.000643282 Jy ! Component: 150 - total flux cleaned = -0.00110835 Jy ! Component: 200 - total flux cleaned = -0.00145632 Jy ! Component: 250 - total flux cleaned = -0.00179262 Jy ! Component: 300 - total flux cleaned = -0.00188487 Jy ! Component: 350 - total flux cleaned = -0.00193079 Jy ! Component: 400 - total flux cleaned = -0.00219978 Jy ! Component: 450 - total flux cleaned = -0.00228639 Jy ! Component: 500 - total flux cleaned = -0.0022865 Jy ! Component: 550 - total flux cleaned = -0.00249982 Jy ! Component: 600 - total flux cleaned = -0.00266765 Jy ! Component: 650 - total flux cleaned = -0.00291534 Jy ! Component: 700 - total flux cleaned = -0.00311881 Jy ! Component: 750 - total flux cleaned = -0.00331923 Jy ! Component: 800 - total flux cleaned = -0.00343828 Jy ! Component: 850 - total flux cleaned = -0.00363445 Jy ! Component: 900 - total flux cleaned = -0.00375111 Jy ! Component: 950 - total flux cleaned = -0.00394272 Jy ! Component: 1000 - total flux cleaned = -0.00405561 Jy ! Component: 1050 - total flux cleaned = -0.00412989 Jy ! Component: 1100 - total flux cleaned = -0.00424117 Jy ! Component: 1150 - total flux cleaned = -0.00435112 Jy ! Component: 1200 - total flux cleaned = -0.00449631 Jy ! Component: 1250 - total flux cleaned = -0.00453216 Jy ! Component: 1300 - total flux cleaned = -0.0046393 Jy ! Component: 1350 - total flux cleaned = -0.00474513 Jy ! Component: 1400 - total flux cleaned = -0.00488508 Jy ! Component: 1450 - total flux cleaned = -0.00502311 Jy ! Component: 1500 - total flux cleaned = -0.0049887 Jy ! Component: 1550 - total flux cleaned = -0.00505658 Jy ! Component: 1600 - total flux cleaned = -0.0050902 Jy ! Component: 1650 - total flux cleaned = -0.00505663 Jy ! Component: 1700 - total flux cleaned = -0.00515643 Jy ! Component: 1750 - total flux cleaned = -0.00522178 Jy ! Component: 1800 - total flux cleaned = -0.0051893 Jy ! Component: 1850 - total flux cleaned = -0.00522175 Jy ! Component: 1900 - total flux cleaned = -0.00515729 Jy ! Component: 1950 - total flux cleaned = -0.00512541 Jy ! Component: 2000 - total flux cleaned = -0.00515667 Jy ! Component: 2050 - total flux cleaned = -0.00500028 Jy ! Component: 2100 - total flux cleaned = -0.00500039 Jy ! Component: 2150 - total flux cleaned = -0.00500029 Jy ! Component: 2200 - total flux cleaned = -0.00490837 Jy ! Component: 2250 - total flux cleaned = -0.00496945 Jy ! Component: 2300 - total flux cleaned = -0.00490901 Jy ! Component: 2350 - total flux cleaned = -0.00469929 Jy ! Component: 2400 - total flux cleaned = -0.00469937 Jy ! Component: 2450 - total flux cleaned = -0.00466967 Jy ! Component: 2500 - total flux cleaned = -0.00455207 Jy ! Component: 2550 - total flux cleaned = -0.00452284 Jy ! Component: 2600 - total flux cleaned = -0.00434912 Jy ! Component: 2650 - total flux cleaned = -0.00423393 Jy ! Component: 2700 - total flux cleaned = -0.00414852 Jy ! Component: 2750 - total flux cleaned = -0.00406328 Jy ! Component: 2800 - total flux cleaned = -0.00392252 Jy ! Component: 2850 - total flux cleaned = -0.00383884 Jy ! Component: 2900 - total flux cleaned = -0.0038109 Jy ! Component: 2950 - total flux cleaned = -0.00364554 Jy ! Component: 3000 - total flux cleaned = -0.00356341 Jy ! Component: 3050 - total flux cleaned = -0.00348141 Jy ! Component: 3100 - total flux cleaned = -0.00345404 Jy ! Component: 3150 - total flux cleaned = -0.0033732 Jy ! Component: 3200 - total flux cleaned = -0.00329287 Jy ! Component: 3250 - total flux cleaned = -0.00331921 Jy ! Component: 3300 - total flux cleaned = -0.00310725 Jy ! Component: 3350 - total flux cleaned = -0.00297593 Jy ! Component: 3400 - total flux cleaned = -0.00284537 Jy ! Component: 3450 - total flux cleaned = -0.00284546 Jy ! Component: 3500 - total flux cleaned = -0.00287132 Jy ! Component: 3550 - total flux cleaned = -0.00274286 Jy ! Component: 3600 - total flux cleaned = -0.00261491 Jy ! Component: 3650 - total flux cleaned = -0.00243704 Jy ! Component: 3700 - total flux cleaned = -0.00243723 Jy ! Component: 3750 - total flux cleaned = -0.0023868 Jy ! Component: 3800 - total flux cleaned = -0.00216178 Jy ! Component: 3850 - total flux cleaned = -0.00216193 Jy ! Component: 3900 - total flux cleaned = -0.00203814 Jy ! Component: 3950 - total flux cleaned = -0.00201362 Jy ! Component: 4000 - total flux cleaned = -0.00196471 Jy ! Component: 4050 - total flux cleaned = -0.00189176 Jy ! Total flux subtracted in 4096 components = -0.00172217 Jy ! Clean residual min=-0.001395 max=0.001236 Jy/beam ! Clean residual mean=-0.000001 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 2.24595 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 464 components and 2.24595 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0102+5824_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8989 x 1.211 at 12.66 degrees (North through East) ! Clean map min=-0.0033444 max=1.9331 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0102+5824_X_d_map.fits wmodel /image_prod/ug002_uva//J0102+5824_X_d_map.mod ! Writing 464 model components to file: /image_prod/ug002_uva//J0102+5824_X_d_map.mod wobs /image_prod/ug002_uva//J0102+5824_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0102+5824_X_d_uvs.fits wwins /image_prod/ug002_uva//J0102+5824_X_d_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J0102+5824_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.93309 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000397237 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0616478 0.0616478 0.123296 0.246591 0.493183 0.986365 1.97273 3.94546 7.89092 15.7818 31.5637 63.1274 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.933 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4866.35 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0102+5824_X_d_dfm.log closed on Wed Mar 4 18:48:24 2020