! Started logfile: /image_prod/ug002_uva//J0102+5824_X_c_dfm.log on Wed Mar 4 18:48:12 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J0102+5824_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J0102+5824_X_c_uva.fits ! AN table 1: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.863095 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 5220 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.115758Jy sigma=7.660228 ! Fit after self-cal, rms=0.959064Jy sigma=3.254775 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7313 mas, bmaj=0.9616 mas, bpa=-5.636 degrees ! Estimated noise=3.68155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39148 Jy ! Component: 100 - total flux cleaned = 1.71683 Jy ! Total flux subtracted in 100 components = 1.71683 Jy ! Clean residual min=-0.071978 max=0.121999 Jy/beam ! Clean residual mean=0.000033 rms=0.015604 Jy/beam ! Combined flux in latest and established models = 1.71683 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.71683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.399858Jy sigma=1.238537 ! Fit after self-cal, rms=0.399743Jy sigma=1.238190 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130995 Jy ! Component: 100 - total flux cleaned = 0.198867 Jy ! Total flux subtracted in 100 components = 0.198867 Jy ! Clean residual min=-0.072438 max=0.087929 Jy/beam ! Clean residual mean=0.000019 rms=0.013310 Jy/beam ! Combined flux in latest and established models = 1.91569 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 1.91569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.326781Jy sigma=1.029996 ! Fit after self-cal, rms=0.326291Jy sigma=1.027864 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0771531 Jy ! Component: 100 - total flux cleaned = 0.121755 Jy ! Total flux subtracted in 100 components = 0.121755 Jy ! Clean residual min=-0.075863 max=0.072398 Jy/beam ! Clean residual mean=0.000014 rms=0.012125 Jy/beam ! Combined flux in latest and established models = 2.03745 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 2.03745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.298700Jy sigma=0.939519 ! Fit after self-cal, rms=0.296121Jy sigma=0.927221 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8801 mas, bmaj=1.183 mas, bpa=-8.13 degrees ! Estimated noise=2.79353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533743 Jy ! Component: 100 - total flux cleaned = 0.0864906 Jy ! Component: 150 - total flux cleaned = 0.10999 Jy ! Component: 200 - total flux cleaned = 0.127173 Jy ! Total flux subtracted in 200 components = 0.127173 Jy ! Clean residual min=-0.075104 max=0.064255 Jy/beam ! Clean residual mean=0.000020 rms=0.013020 Jy/beam ! Combined flux in latest and established models = 2.16462 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 2.16462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.280948Jy sigma=0.889328 ! Fit after self-cal, rms=0.279665Jy sigma=0.883178 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8801 x 1.183 at -8.13 degrees (North through East) ! Clean map min=-0.067727 max=1.7956 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.95 KP 1.04 LA 0.97 ! MK 1.08 NL 1.14 OV 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.96 KP 1.04 LA 0.98 ! MK 1.09 NL 1.10 OV 1.01 SC 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.96 KP 1.04 LA 1.00 ! MK 1.07 NL 1.12 OV 1.02 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.95 KP 1.05 LA 0.98 ! MK 1.07 NL 1.13 OV 1.01 SC 0.97 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.97 KP 1.05 LA 0.99 ! MK 1.05 NL 1.10 OV 1.03 SC 0.97 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.96 KP 1.06 LA 0.95 ! MK 1.09 NL 1.13 OV 1.03 SC 0.96 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 KP 1.05 LA 0.99 ! MK 1.07 NL 1.10 OV 1.03 SC 0.96 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.97 KP 1.05 LA 0.97 ! MK 1.06 NL 1.12 OV 1.02 SC 0.96 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.96 KP 1.05 LA 0.97 ! MK 1.05 NL 1.10 OV 1.01 SC 0.99 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.96 KP 1.04 LA 0.99 ! MK 1.07 NL 1.13 OV 0.98 SC 0.98 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.96 KP 1.05 LA 0.98 ! MK 1.04 NL 1.10 OV 1.02 SC 0.97 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.96 KP 1.04 LA 0.98 ! MK 1.07 NL 1.13 OV 1.03 SC 0.97 ! ! ! Fit before self-cal, rms=0.279665Jy sigma=0.883178 ! Fit after self-cal, rms=0.194284Jy sigma=0.643048 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8934 mas, bmaj=1.207 mas, bpa=-6.984 degrees ! Estimated noise=2.83081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021867 Jy ! Component: 100 - total flux cleaned = 0.00272588 Jy ! Component: 150 - total flux cleaned = 0.00272471 Jy ! Component: 200 - total flux cleaned = 0.00272023 Jy ! Total flux subtracted in 200 components = 0.00272023 Jy ! Clean residual min=-0.046581 max=0.041446 Jy/beam ! Clean residual mean=0.000028 rms=0.009455 Jy/beam ! Combined flux in latest and established models = 2.16734 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 2.16734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.192074Jy sigma=0.632716 ! Fit after self-cal, rms=0.191858Jy sigma=0.632034 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.191858Jy sigma=0.632034 ! Fit after self-cal, rms=0.076618Jy sigma=0.271901 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8888 mas, bmaj=1.208 mas, bpa=-7.945 degrees ! Estimated noise=2.82353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0179426 Jy ! Component: 100 - total flux cleaned = -0.0208926 Jy ! Component: 150 - total flux cleaned = -0.0225168 Jy ! Component: 200 - total flux cleaned = -0.023057 Jy ! Total flux subtracted in 200 components = -0.023057 Jy ! Clean residual min=-0.012009 max=0.010577 Jy/beam ! Clean residual mean=0.000004 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 2.14429 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 2.14429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071581Jy sigma=0.252754 ! Fit after self-cal, rms=0.070777Jy sigma=0.250014 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00316048 Jy ! Component: 100 - total flux cleaned = -0.0041864 Jy ! Component: 150 - total flux cleaned = -0.00502483 Jy ! Component: 200 - total flux cleaned = -0.00502918 Jy ! Total flux subtracted in 200 components = -0.00502918 Jy ! Clean residual min=-0.010007 max=0.010229 Jy/beam ! Clean residual mean=0.000005 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 2.13926 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 2.13926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069279Jy sigma=0.243926 ! Fit after self-cal, rms=0.068998Jy sigma=0.243159 ! Inverting map ! Added new window around map position (3.2, 15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901375 Jy ! Component: 100 - total flux cleaned = 0.00898709 Jy ! Component: 150 - total flux cleaned = 0.00857229 Jy ! Component: 200 - total flux cleaned = 0.00895343 Jy ! Total flux subtracted in 200 components = 0.00895343 Jy ! Clean residual min=-0.008604 max=0.008538 Jy/beam ! Clean residual mean=0.000004 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 2.14821 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 2.14821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067224Jy sigma=0.236611 ! Fit after self-cal, rms=0.067040Jy sigma=0.236114 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067040Jy sigma=0.236114 ! Fit after self-cal, rms=0.065282Jy sigma=0.231631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8886 mas, bmaj=1.207 mas, bpa=-7.884 degrees ! Estimated noise=2.82158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00596861 Jy ! Component: 100 - total flux cleaned = -0.00705652 Jy ! Component: 150 - total flux cleaned = -0.00725638 Jy ! Component: 200 - total flux cleaned = -0.00726541 Jy ! Total flux subtracted in 200 components = -0.00726541 Jy ! Clean residual min=-0.007563 max=0.007333 Jy/beam ! Clean residual mean=0.000002 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 2.14095 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 2.14095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063949Jy sigma=0.226288 ! Fit after self-cal, rms=0.063728Jy sigma=0.225639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172474 Jy ! Component: 100 - total flux cleaned = -0.00157222 Jy ! Component: 150 - total flux cleaned = -0.00157729 Jy ! Component: 200 - total flux cleaned = -0.001974 Jy ! Total flux subtracted in 200 components = -0.001974 Jy ! Clean residual min=-0.006812 max=0.006725 Jy/beam ! Clean residual mean=0.000002 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 2.13897 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 2.13897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063082Jy sigma=0.223061 ! Fit after self-cal, rms=0.062987Jy sigma=0.222851 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062987Jy sigma=0.222851 ! Fit after self-cal, rms=0.062395Jy sigma=0.221621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.193 mas, bmaj=2.302 mas, bpa=-2.732 degrees ! Estimated noise=4.00378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00451491 Jy ! Component: 100 - total flux cleaned = -0.00631993 Jy ! Component: 150 - total flux cleaned = -0.00746829 Jy ! Component: 200 - total flux cleaned = -0.00819193 Jy ! Total flux subtracted in 200 components = -0.00819193 Jy ! Clean residual min=-0.008000 max=0.005784 Jy/beam ! Clean residual mean=0.000002 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 2.13078 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 2.13078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062211Jy sigma=0.221486 ! Fit after self-cal, rms=0.062175Jy sigma=0.221229 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107576 Jy ! Component: 100 - total flux cleaned = -0.00129358 Jy ! Component: 150 - total flux cleaned = -0.00166162 Jy ! Component: 200 - total flux cleaned = -0.00181739 Jy ! Total flux subtracted in 200 components = -0.00181739 Jy ! Clean residual min=-0.007690 max=0.005962 Jy/beam ! Clean residual mean=0.000002 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 2.12896 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 2.12896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062078Jy sigma=0.221098 ! Fit after self-cal, rms=0.062061Jy sigma=0.221036 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8883 mas, bmaj=1.207 mas, bpa=-7.854 degrees ! Estimated noise=2.8202 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8883 x 1.207 at -7.854 degrees (North through East) ! Clean map min=-0.0058107 max=1.8026 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062061Jy sigma=0.221036 ! Fit after self-cal, rms=0.058232Jy sigma=0.200249 ! Inverting map and beam ! Estimated beam: bmin=0.8881 mas, bmaj=1.207 mas, bpa=-7.73 degrees ! Estimated noise=2.82039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000816754 Jy ! Component: 100 - total flux cleaned = -0.000803576 Jy ! Component: 150 - total flux cleaned = -0.00121118 Jy ! Component: 200 - total flux cleaned = -0.00169867 Jy ! Total flux subtracted in 200 components = -0.00169867 Jy ! Clean residual min=-0.005800 max=0.005590 Jy/beam ! Clean residual mean=0.000001 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 2.12726 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 2.12726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057523Jy sigma=0.197110 ! Fit after self-cal, rms=0.057433Jy sigma=0.196861 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000749361 Jy ! Component: 100 - total flux cleaned = -0.000858605 Jy ! Component: 150 - total flux cleaned = -0.000960806 Jy ! Component: 200 - total flux cleaned = -0.00106118 Jy ! Total flux subtracted in 200 components = -0.00106118 Jy ! Clean residual min=-0.005248 max=0.005250 Jy/beam ! Clean residual mean=0.000001 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 2.1262 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 2.1262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057088Jy sigma=0.195298 ! Fit after self-cal, rms=0.057039Jy sigma=0.195210 ! Inverting map ! Added new window around map position (19.8, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347842 Jy ! Component: 100 - total flux cleaned = 0.00389553 Jy ! Component: 150 - total flux cleaned = 0.00366649 Jy ! Component: 200 - total flux cleaned = 0.0037645 Jy ! Total flux subtracted in 200 components = 0.0037645 Jy ! Clean residual min=-0.005009 max=0.005267 Jy/beam ! Clean residual mean=0.000001 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 2.12997 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 2.12997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056423Jy sigma=0.193009 ! Fit after self-cal, rms=0.056380Jy sigma=0.192892 ! Inverting map ! Added new window around map position (-15.6, 22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388367 Jy ! Component: 100 - total flux cleaned = 0.00426923 Jy ! Component: 150 - total flux cleaned = 0.00427046 Jy ! Component: 200 - total flux cleaned = 0.00417715 Jy ! Total flux subtracted in 200 components = 0.00417715 Jy ! Clean residual min=-0.004764 max=0.004565 Jy/beam ! Clean residual mean=0.000000 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 2.13414 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 2.13414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055854Jy sigma=0.190956 ! Fit after self-cal, rms=0.055838Jy sigma=0.190895 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055838Jy sigma=0.190895 ! Fit after self-cal, rms=0.055339Jy sigma=0.190010 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.734 mas, bmaj=0.9614 mas, bpa=-5.437 degrees ! Estimated noise=3.73127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39626 Jy ! Component: 100 - total flux cleaned = 1.72111 Jy ! Component: 150 - total flux cleaned = 1.85031 Jy ! Component: 200 - total flux cleaned = 1.92468 Jy ! Total flux subtracted in 200 components = 1.92468 Jy ! Clean residual min=-0.018093 max=0.041570 Jy/beam ! Clean residual mean=0.000013 rms=0.004540 Jy/beam ! Combined flux in latest and established models = 1.92468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.92468 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8876 mas, bmaj=1.206 mas, bpa=-7.702 degrees ! Estimated noise=2.81921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0669342 Jy ! Component: 100 - total flux cleaned = 0.10537 Jy ! Component: 150 - total flux cleaned = 0.130233 Jy ! Component: 200 - total flux cleaned = 0.147129 Jy ! Total flux subtracted in 200 components = 0.147129 Jy ! Clean residual min=-0.006096 max=0.009309 Jy/beam ! Clean residual mean=0.000009 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 2.07181 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 2.07181 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118099 Jy ! Component: 100 - total flux cleaned = 0.0208308 Jy ! Component: 150 - total flux cleaned = 0.0283185 Jy ! Component: 200 - total flux cleaned = 0.0346579 Jy ! Total flux subtracted in 200 components = 0.0346579 Jy ! Clean residual min=-0.005119 max=0.006745 Jy/beam ! Clean residual mean=0.000004 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 2.10647 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 63 components and 2.10647 Jy ! Inverting map ! Added new window around map position (19.6, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654025 Jy ! Component: 100 - total flux cleaned = 0.0109352 Jy ! Component: 150 - total flux cleaned = 0.013797 Jy ! Component: 200 - total flux cleaned = 0.0157656 Jy ! Total flux subtracted in 200 components = 0.0157656 Jy ! Clean residual min=-0.004579 max=0.005144 Jy/beam ! Clean residual mean=0.000003 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 2.12223 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 87 components and 2.12223 Jy ! Inverting map ! Added new window around map position (10.6, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401595 Jy ! Component: 100 - total flux cleaned = 0.00588151 Jy ! Component: 150 - total flux cleaned = 0.0073249 Jy ! Component: 200 - total flux cleaned = 0.00842168 Jy ! Total flux subtracted in 200 components = 0.00842168 Jy ! Clean residual min=-0.003965 max=0.004491 Jy/beam ! Clean residual mean=0.000002 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 2.13065 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 102 components and 2.13065 Jy ! Inverting map ! Added new window around map position (17.4, -23.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035189 Jy ! Component: 100 - total flux cleaned = 0.00478948 Jy ! Component: 150 - total flux cleaned = 0.00542835 Jy ! Component: 200 - total flux cleaned = 0.00572747 Jy ! Total flux subtracted in 200 components = 0.00572747 Jy ! Clean residual min=-0.003738 max=0.003822 Jy/beam ! Clean residual mean=0.000001 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 2.13638 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 121 components and 2.13638 Jy ! Inverting map ! Added new window around map position (8.4, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021362 Jy ! Component: 100 - total flux cleaned = 0.00295746 Jy ! Component: 150 - total flux cleaned = 0.00380244 Jy ! Component: 200 - total flux cleaned = 0.00424046 Jy ! Total flux subtracted in 200 components = 0.00424046 Jy ! Clean residual min=-0.003555 max=0.003654 Jy/beam ! Clean residual mean=0.000001 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 2.14062 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 142 components and 2.14062 Jy ! Inverting map ! Added new window around map position (3.2, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290108 Jy ! Component: 100 - total flux cleaned = 0.00335442 Jy ! Component: 150 - total flux cleaned = 0.00352479 Jy ! Component: 200 - total flux cleaned = 0.00360362 Jy ! Total flux subtracted in 200 components = 0.00360362 Jy ! Clean residual min=-0.003413 max=0.003706 Jy/beam ! Clean residual mean=0.000001 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 2.14422 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 154 components and 2.14422 Jy ! Inverting map ! Added new window around map position (8, -24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304326 Jy ! Component: 100 - total flux cleaned = 0.00413539 Jy ! Component: 150 - total flux cleaned = 0.0047193 Jy ! Component: 200 - total flux cleaned = 0.0050665 Jy ! Total flux subtracted in 200 components = 0.0050665 Jy ! Clean residual min=-0.003242 max=0.003392 Jy/beam ! Clean residual mean=0.000001 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 2.14929 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 173 components and 2.14929 Jy ! Inverting map ! Added new window around map position (-10.8, -32.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223384 Jy ! Component: 100 - total flux cleaned = 0.00253403 Jy ! Component: 150 - total flux cleaned = 0.00308563 Jy ! Component: 200 - total flux cleaned = 0.00340922 Jy ! Total flux subtracted in 200 components = 0.00340922 Jy ! Clean residual min=-0.002941 max=0.003021 Jy/beam ! Clean residual mean=0.000001 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 2.1527 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 186 components and 2.1527 Jy ! Inverting map ! Added new window around map position (-12.8, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190179 Jy ! Component: 100 - total flux cleaned = 0.00162892 Jy ! Component: 150 - total flux cleaned = 0.00162877 Jy ! Component: 200 - total flux cleaned = 0.00168837 Jy ! Total flux subtracted in 200 components = 0.00168837 Jy ! Clean residual min=-0.002931 max=0.002860 Jy/beam ! Clean residual mean=0.000001 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 2.15439 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 206 components and 2.15438 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.194 mas, bmaj=2.302 mas, bpa=-1.927 degrees ! Estimated noise=4.00588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737327 Jy ! Component: 100 - total flux cleaned = 0.000946423 Jy ! Component: 150 - total flux cleaned = 0.00107227 Jy ! Component: 200 - total flux cleaned = 0.00118964 Jy ! Total flux subtracted in 200 components = 0.00118964 Jy ! Clean residual min=-0.003665 max=0.003146 Jy/beam ! Clean residual mean=0.000000 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 2.15557 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.41409e-05 Jy ! Component: 100 - total flux cleaned = 0.000154914 Jy ! Component: 150 - total flux cleaned = 0.000201144 Jy ! Component: 200 - total flux cleaned = 0.000154753 Jy ! Total flux subtracted in 200 components = 0.000154753 Jy ! Clean residual min=-0.003578 max=0.002936 Jy/beam ! Clean residual mean=-0.000000 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 2.15573 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 239 components and 2.15573 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8876 mas, bmaj=1.206 mas, bpa=-7.702 degrees ! Estimated noise=2.81921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119747 Jy ! Component: 100 - total flux cleaned = -0.000181281 Jy ! Component: 150 - total flux cleaned = -0.000182003 Jy ! Component: 200 - total flux cleaned = -7.73261e-05 Jy ! Total flux subtracted in 200 components = -7.73261e-05 Jy ! Clean residual min=-0.002635 max=0.002843 Jy/beam ! Clean residual mean=-0.000000 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 2.15565 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 251 components and 2.15565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052635Jy sigma=0.180330 ! Fit after self-cal, rms=0.052470Jy sigma=0.179843 wmodel J0102+5824_X_c_map.mod ! Writing 251 model components to file: J0102+5824_X_c_map.mod wobs J0102+5824_X_c_uvs.fits ! Writing UV FITS file: J0102+5824_X_c_uvs.fits wwins J0102+5824_X_c_map.win ! wwins: Wrote 14 windows to J0102+5824_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644073 Jy ! Component: 100 - total flux cleaned = 0.000731924 Jy ! Component: 150 - total flux cleaned = 0.000730865 Jy ! Component: 200 - total flux cleaned = 0.000730339 Jy ! Component: 250 - total flux cleaned = 0.000730403 Jy ! Component: 300 - total flux cleaned = 0.000806669 Jy ! Component: 350 - total flux cleaned = 0.000768989 Jy ! Component: 400 - total flux cleaned = 0.000805295 Jy ! Component: 450 - total flux cleaned = 0.000841074 Jy ! Component: 500 - total flux cleaned = 0.0007714 Jy ! Component: 550 - total flux cleaned = 0.000840668 Jy ! Component: 600 - total flux cleaned = 0.000875358 Jy ! Component: 650 - total flux cleaned = 0.000942195 Jy ! Component: 700 - total flux cleaned = 0.000877678 Jy ! Component: 750 - total flux cleaned = 0.00100597 Jy ! Component: 800 - total flux cleaned = 0.000879797 Jy ! Component: 850 - total flux cleaned = 0.000972994 Jy ! Component: 900 - total flux cleaned = 0.000911285 Jy ! Component: 950 - total flux cleaned = 0.000820418 Jy ! Component: 1000 - total flux cleaned = 0.000939166 Jy ! Component: 1050 - total flux cleaned = 0.000880005 Jy ! Component: 1100 - total flux cleaned = 0.000821423 Jy ! Component: 1150 - total flux cleaned = 0.000849956 Jy ! Component: 1200 - total flux cleaned = 0.00073733 Jy ! Component: 1250 - total flux cleaned = 0.000765746 Jy ! Component: 1300 - total flux cleaned = 0.000793404 Jy ! Component: 1350 - total flux cleaned = 0.000874984 Jy ! Component: 1400 - total flux cleaned = 0.0008747 Jy ! Component: 1450 - total flux cleaned = 0.00084784 Jy ! Component: 1500 - total flux cleaned = 0.000952329 Jy ! Component: 1550 - total flux cleaned = 0.000874908 Jy ! Component: 1600 - total flux cleaned = 0.00100284 Jy ! Component: 1650 - total flux cleaned = 0.00110382 Jy ! Component: 1700 - total flux cleaned = 0.00110396 Jy ! Component: 1750 - total flux cleaned = 0.00112863 Jy ! Component: 1800 - total flux cleaned = 0.00120208 Jy ! Component: 1850 - total flux cleaned = 0.00125018 Jy ! Component: 1900 - total flux cleaned = 0.0012262 Jy ! Component: 1950 - total flux cleaned = 0.0012733 Jy ! Component: 2000 - total flux cleaned = 0.00120274 Jy ! Component: 2050 - total flux cleaned = 0.00131883 Jy ! Component: 2100 - total flux cleaned = 0.00122693 Jy ! Component: 2150 - total flux cleaned = 0.00131798 Jy ! Component: 2200 - total flux cleaned = 0.00129519 Jy ! Component: 2250 - total flux cleaned = 0.00133971 Jy ! Component: 2300 - total flux cleaned = 0.00131791 Jy ! Component: 2350 - total flux cleaned = 0.00138362 Jy ! Component: 2400 - total flux cleaned = 0.00140515 Jy ! Component: 2450 - total flux cleaned = 0.00151235 Jy ! Component: 2500 - total flux cleaned = 0.00159738 Jy ! Component: 2550 - total flux cleaned = 0.00161847 Jy ! Component: 2600 - total flux cleaned = 0.00176483 Jy ! Component: 2650 - total flux cleaned = 0.00174377 Jy ! Component: 2700 - total flux cleaned = 0.00184659 Jy ! Component: 2750 - total flux cleaned = 0.00186674 Jy ! Component: 2800 - total flux cleaned = 0.00192766 Jy ! Component: 2850 - total flux cleaned = 0.00202749 Jy ! Component: 2900 - total flux cleaned = 0.00210695 Jy ! Component: 2950 - total flux cleaned = 0.00206762 Jy ! Component: 3000 - total flux cleaned = 0.00220454 Jy ! Component: 3050 - total flux cleaned = 0.00228213 Jy ! Component: 3100 - total flux cleaned = 0.0023786 Jy ! Component: 3150 - total flux cleaned = 0.00241642 Jy ! Component: 3200 - total flux cleaned = 0.00243552 Jy ! Component: 3250 - total flux cleaned = 0.00247301 Jy ! Component: 3300 - total flux cleaned = 0.00256645 Jy ! Component: 3350 - total flux cleaned = 0.00264047 Jy ! Component: 3400 - total flux cleaned = 0.00269575 Jy ! Component: 3450 - total flux cleaned = 0.0027871 Jy ! Component: 3500 - total flux cleaned = 0.00284133 Jy ! Component: 3550 - total flux cleaned = 0.0029493 Jy ! Component: 3600 - total flux cleaned = 0.00302057 Jy ! Component: 3650 - total flux cleaned = 0.00309167 Jy ! Component: 3700 - total flux cleaned = 0.0032324 Jy ! Component: 3750 - total flux cleaned = 0.00319738 Jy ! Component: 3800 - total flux cleaned = 0.00330143 Jy ! Component: 3850 - total flux cleaned = 0.00338761 Jy ! Component: 3900 - total flux cleaned = 0.0033707 Jy ! Component: 3950 - total flux cleaned = 0.00347318 Jy ! Component: 4000 - total flux cleaned = 0.0035407 Jy ! Component: 4050 - total flux cleaned = 0.00362484 Jy ! Total flux subtracted in 4096 components = 0.00364147 Jy ! Clean residual min=-0.001094 max=0.000945 Jy/beam ! Clean residual mean=-0.000000 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 2.15929 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 579 components and 2.15929 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J0102+5824_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8876 x 1.206 at -7.702 degrees (North through East) ! Clean map min=-0.002843 max=1.8072 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J0102+5824_X_c_map.fits wmodel /image_prod/ug002_uva//J0102+5824_X_c_map.mod ! Writing 579 model components to file: /image_prod/ug002_uva//J0102+5824_X_c_map.mod wobs /image_prod/ug002_uva//J0102+5824_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J0102+5824_X_c_uvs.fits wwins /image_prod/ug002_uva//J0102+5824_X_c_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J0102+5824_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.80716 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000270685 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0449354 0.0449354 0.0898708 0.179742 0.359483 0.718966 1.43793 2.87587 5.75173 11.5035 23.0069 46.0138 92.0277 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.807 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6676.25 quit ! Quitting program ! Log file /image_prod/ug002_uva//J0102+5824_X_c_dfm.log closed on Wed Mar 4 18:48:18 2020