! Started logfile: /image_prod/ug002_uva//J0101+0605_S_dfm.log on Wed Mar  4 18:46:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0101+0605_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0101+0605_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.925926 visibilities/baseline/integration-bin.
! Found source: J0101+0605
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7500 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0101+0605_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004141Jy  sigma=8.527854
! Fit after  self-cal, rms=0.949640Jy  sigma=8.070556
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.261 mas, bmaj=13.39 mas, bpa=-18.55 degrees
! Estimated noise=1.54223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394528 Jy
! Component: 100  -  total flux cleaned = 0.0483234 Jy
! Total flux subtracted in 100 components = 0.0483234 Jy
! Clean residual min=-0.004638 max=0.012341 Jy/beam
! Clean residual mean=-0.000011 rms=0.001386 Jy/beam
! Combined flux in latest and established models = 0.0483234 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0483234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065086Jy  sigma=0.485457
! Fit after  self-cal, rms=0.064240Jy  sigma=0.478877
! Inverting map 
! Added new window around map position (16.5, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115478 Jy
! Component: 100  -  total flux cleaned = 0.0172924 Jy
! Total flux subtracted in 100 components = 0.0172924 Jy
! Clean residual min=-0.003508 max=0.005208 Jy/beam
! Clean residual mean=-0.000008 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.0656158 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.0656158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062069Jy  sigma=0.457409
! Fit after  self-cal, rms=0.061497Jy  sigma=0.452991
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00596206 Jy
! Component: 100  -  total flux cleaned = 0.00920617 Jy
! Total flux subtracted in 100 components = 0.00920617 Jy
! Clean residual min=-0.003180 max=0.002876 Jy/beam
! Clean residual mean=-0.000007 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.074822 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 34 components and 0.0748219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060884Jy  sigma=0.446929
! Fit after  self-cal, rms=0.060750Jy  sigma=0.445921
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.051 mas, bmaj=13.61 mas, bpa=-17.76 degrees
! Estimated noise=0.991812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, 3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430206 Jy
! Component: 100  -  total flux cleaned = 0.00622034 Jy
! Component: 150  -  total flux cleaned = 0.00707923 Jy
! Component: 200  -  total flux cleaned = 0.00770416 Jy
! Total flux subtracted in 200 components = 0.00770416 Jy
! Clean residual min=-0.001994 max=0.001854 Jy/beam
! Clean residual mean=-0.000009 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.0825261 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 64 components and 0.0825261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060426Jy  sigma=0.442769
! Fit after  self-cal, rms=0.060364Jy  sigma=0.442284
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.051 x 13.61 at -17.76 degrees (North through East)
! Clean map  min=-0.0017255  max=0.051063 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.04     HN        1.02     KP        0.96     
!   LA        0.95     MK        0.99     NL        0.98     OV        1.03     
!   PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        0.98     KP        0.95     
!   LA        1.00     MK        1.07     NL        1.09     OV        1.01     
!   PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     HN        1.02     KP        0.97     
!   LA        1.03     MK        0.97     NL        1.03     OV        1.03     
!   PT        0.98     
! 
! 
! Fit before self-cal, rms=0.060364Jy  sigma=0.442284
! Fit after  self-cal, rms=0.058249Jy  sigma=0.441393
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.083 mas, bmaj=13.35 mas, bpa=-17.66 degrees
! Estimated noise=0.977861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000463948 Jy
! Component: 100  -  total flux cleaned = 0.00047474 Jy
! Component: 150  -  total flux cleaned = 0.000356891 Jy
! Component: 200  -  total flux cleaned = 0.000329104 Jy
! Total flux subtracted in 200 components = 0.000329104 Jy
! Clean residual min=-0.001941 max=0.001466 Jy/beam
! Clean residual mean=-0.000009 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0828552 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 93 components and 0.0828552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058202Jy  sigma=0.440933
! Fit after  self-cal, rms=0.058180Jy  sigma=0.440807
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058180Jy  sigma=0.440807
! Fit after  self-cal, rms=0.058411Jy  sigma=0.439880
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.099 mas, bmaj=13.29 mas, bpa=-17.76 degrees
! Estimated noise=0.982816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000442154 Jy
! Component: 100  -  total flux cleaned = 0.000447289 Jy
! Component: 150  -  total flux cleaned = 0.000382631 Jy
! Component: 200  -  total flux cleaned = 0.000342897 Jy
! Total flux subtracted in 200 components = 0.000342897 Jy
! Clean residual min=-0.001622 max=0.001377 Jy/beam
! Clean residual mean=-0.000005 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.0831981 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.0831981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058388Jy  sigma=0.439688
! Fit after  self-cal, rms=0.058398Jy  sigma=0.439625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105062 Jy
! Component: 100  -  total flux cleaned = 0.000104981 Jy
! Component: 150  -  total flux cleaned = 8.82024e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104291 Jy
! Total flux subtracted in 200 components = 0.000104291 Jy
! Clean residual min=-0.001595 max=0.001300 Jy/beam
! Clean residual mean=-0.000005 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0833024 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 126 components and 0.0833024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058385Jy  sigma=0.439531
! Fit after  self-cal, rms=0.058383Jy  sigma=0.439522
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058383Jy  sigma=0.439522
! Fit after  self-cal, rms=0.058543Jy  sigma=0.439500
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.112 mas, bmaj=13.24 mas, bpa=-17.77 degrees
! Estimated noise=0.984993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395712 Jy
! Component: 100  -  total flux cleaned = 0.000522099 Jy
! Component: 150  -  total flux cleaned = 0.000571155 Jy
! Component: 200  -  total flux cleaned = 0.000601016 Jy
! Total flux subtracted in 200 components = 0.000601016 Jy
! Clean residual min=-0.001564 max=0.001295 Jy/beam
! Clean residual mean=-0.000005 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.0839034 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 134 components and 0.0839034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058531Jy  sigma=0.439411
! Fit after  self-cal, rms=0.058531Jy  sigma=0.439400
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.28705e-05 Jy
! Component: 100  -  total flux cleaned = 0.000115765 Jy
! Component: 150  -  total flux cleaned = 0.000115809 Jy
! Component: 200  -  total flux cleaned = 0.000128552 Jy
! Total flux subtracted in 200 components = 0.000128552 Jy
! Clean residual min=-0.001551 max=0.001261 Jy/beam
! Clean residual mean=-0.000005 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.084032 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 144 components and 0.084032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058524Jy  sigma=0.439353
! Fit after  self-cal, rms=0.058523Jy  sigma=0.439350
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058523Jy  sigma=0.439350
! Fit after  self-cal, rms=0.058627Jy  sigma=0.439343
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.467 mas, bmaj=13.9 mas, bpa=-12.36 degrees
! Estimated noise=1.08626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285834 Jy
! Component: 100  -  total flux cleaned = 0.00026263 Jy
! Component: 150  -  total flux cleaned = 0.000252277 Jy
! Component: 200  -  total flux cleaned = 0.00024294 Jy
! Total flux subtracted in 200 components = 0.00024294 Jy
! Clean residual min=-0.001439 max=0.001582 Jy/beam
! Clean residual mean=-0.000007 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0842749 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 170 components and 0.0842749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058624Jy  sigma=0.439301
! Fit after  self-cal, rms=0.058619Jy  sigma=0.439294
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.84691e-05 Jy
! Component: 100  -  total flux cleaned = -2.867e-05 Jy
! Component: 150  -  total flux cleaned = -5.17549e-05 Jy
! Component: 200  -  total flux cleaned = -6.59341e-05 Jy
! Total flux subtracted in 200 components = -6.59341e-05 Jy
! Clean residual min=-0.001422 max=0.001601 Jy/beam
! Clean residual mean=-0.000007 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.084209 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 181 components and 0.084209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058617Jy  sigma=0.439276
! Fit after  self-cal, rms=0.058615Jy  sigma=0.439274
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.12 mas, bmaj=13.22 mas, bpa=-17.78 degrees
! Estimated noise=0.987489 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.12 x 13.22 at -17.78 degrees (North through East)
! Clean map  min=-0.0021803  max=0.05049 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=12.89 mas, bpa=-18.66 degrees
! Estimated noise=1.53599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0405777 Jy
! Component: 100  -  total flux cleaned = 0.0565888 Jy
! Component: 150  -  total flux cleaned = 0.0654544 Jy
! Component: 200  -  total flux cleaned = 0.0711833 Jy
! Total flux subtracted in 200 components = 0.0711833 Jy
! Clean residual min=-0.003120 max=0.003147 Jy/beam
! Clean residual mean=-0.000005 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.0711833 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0711833 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.12 mas, bmaj=13.22 mas, bpa=-17.78 degrees
! Estimated noise=0.987489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536297 Jy
! Component: 100  -  total flux cleaned = 0.00846743 Jy
! Component: 150  -  total flux cleaned = 0.00969616 Jy
! Component: 200  -  total flux cleaned = 0.0107699 Jy
! Total flux subtracted in 200 components = 0.0107699 Jy
! Clean residual min=-0.001649 max=0.001415 Jy/beam
! Clean residual mean=-0.000004 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.0819532 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 66 components and 0.0819532 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.467 mas, bmaj=13.9 mas, bpa=-12.36 degrees
! Estimated noise=1.08626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128689 Jy
! Component: 100  -  total flux cleaned = 0.001756 Jy
! Component: 150  -  total flux cleaned = 0.00212569 Jy
! Component: 200  -  total flux cleaned = 0.00233472 Jy
! Total flux subtracted in 200 components = 0.00233472 Jy
! Clean residual min=-0.001547 max=0.001655 Jy/beam
! Clean residual mean=-0.000007 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.0842879 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.68084e-05 Jy
! Component: 100  -  total flux cleaned = 2.04186e-05 Jy
! Component: 150  -  total flux cleaned = 5.61171e-06 Jy
! Component: 200  -  total flux cleaned = -7.86581e-06 Jy
! Total flux subtracted in 200 components = -7.86581e-06 Jy
! Clean residual min=-0.001521 max=0.001639 Jy/beam
! Clean residual mean=-0.000007 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0842801 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 141 components and 0.0842801 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.12 mas, bmaj=13.22 mas, bpa=-17.78 degrees
! Estimated noise=0.987489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123132 Jy
! Component: 100  -  total flux cleaned = -5.8352e-05 Jy
! Component: 150  -  total flux cleaned = 4.18669e-05 Jy
! Component: 200  -  total flux cleaned = 7.85332e-05 Jy
! Total flux subtracted in 200 components = 7.85332e-05 Jy
! Clean residual min=-0.001501 max=0.001323 Jy/beam
! Clean residual mean=-0.000005 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.0843586 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 165 components and 0.0843586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058646Jy  sigma=0.439427
! Fit after  self-cal, rms=0.058643Jy  sigma=0.439401
wmodel J0101+0605_S_map.mod
! Writing 165 model components to file: J0101+0605_S_map.mod
wobs   J0101+0605_S_uvs.fits
! Writing UV FITS file: J0101+0605_S_uvs.fits
wwins  J0101+0605_S_map.win
! wwins: Wrote 3 windows to J0101+0605_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197062 Jy
! Component: 100  -  total flux cleaned = -5.59746e-05 Jy
! Component: 150  -  total flux cleaned = -3.5284e-05 Jy
! Component: 200  -  total flux cleaned = 6.28569e-06 Jy
! Component: 250  -  total flux cleaned = -3.43564e-05 Jy
! Component: 300  -  total flux cleaned = -5.39683e-05 Jy
! Component: 350  -  total flux cleaned = -9.18398e-05 Jy
! Component: 400  -  total flux cleaned = -7.32571e-05 Jy
! Component: 450  -  total flux cleaned = -9.15956e-05 Jy
! Component: 500  -  total flux cleaned = -0.000144437 Jy
! Component: 550  -  total flux cleaned = -0.000230767 Jy
! Component: 600  -  total flux cleaned = -0.000365475 Jy
! Component: 650  -  total flux cleaned = -0.000381739 Jy
! Component: 700  -  total flux cleaned = -0.000463103 Jy
! Component: 750  -  total flux cleaned = -0.000574766 Jy
! Component: 800  -  total flux cleaned = -0.00059038 Jy
! Component: 850  -  total flux cleaned = -0.000637082 Jy
! Component: 900  -  total flux cleaned = -0.000805113 Jy
! Component: 950  -  total flux cleaned = -0.000865245 Jy
! Component: 1000  -  total flux cleaned = -0.00101334 Jy
! Component: 1050  -  total flux cleaned = -0.00110117 Jy
! Component: 1100  -  total flux cleaned = -0.00118779 Jy
! Component: 1150  -  total flux cleaned = -0.00127321 Jy
! Component: 1200  -  total flux cleaned = -0.0013994 Jy
! Component: 1250  -  total flux cleaned = -0.0015104 Jy
! Component: 1300  -  total flux cleaned = -0.0015789 Jy
! Component: 1350  -  total flux cleaned = -0.0017007 Jy
! Component: 1400  -  total flux cleaned = -0.00183399 Jy
! Component: 1450  -  total flux cleaned = -0.00189973 Jy
! Component: 1500  -  total flux cleaned = -0.00195199 Jy
! Component: 1550  -  total flux cleaned = -0.00205511 Jy
! Component: 1600  -  total flux cleaned = -0.00213156 Jy
! Component: 1650  -  total flux cleaned = -0.00216947 Jy
! Component: 1700  -  total flux cleaned = -0.00228177 Jy
! Component: 1750  -  total flux cleaned = -0.00233112 Jy
! Component: 1800  -  total flux cleaned = -0.00238002 Jy
! Component: 1850  -  total flux cleaned = -0.0024888 Jy
! Component: 1900  -  total flux cleaned = -0.00257256 Jy
! Component: 1950  -  total flux cleaned = -0.00263174 Jy
! Component: 2000  -  total flux cleaned = -0.00263183 Jy
! Component: 2050  -  total flux cleaned = -0.00269006 Jy
! Component: 2100  -  total flux cleaned = -0.00270144 Jy
! Component: 2150  -  total flux cleaned = -0.00271279 Jy
! Component: 2200  -  total flux cleaned = -0.00272417 Jy
! Component: 2250  -  total flux cleaned = -0.00278022 Jy
! Component: 2300  -  total flux cleaned = -0.00280244 Jy
! Component: 2350  -  total flux cleaned = -0.00286859 Jy
! Component: 2400  -  total flux cleaned = -0.00287956 Jy
! Component: 2450  -  total flux cleaned = -0.00296633 Jy
! Component: 2500  -  total flux cleaned = -0.00297699 Jy
! Component: 2550  -  total flux cleaned = -0.00304105 Jy
! Component: 2600  -  total flux cleaned = -0.00310443 Jy
! Component: 2650  -  total flux cleaned = -0.00315677 Jy
! Component: 2700  -  total flux cleaned = -0.00323997 Jy
! Component: 2750  -  total flux cleaned = -0.0032503 Jy
! Component: 2800  -  total flux cleaned = -0.00335282 Jy
! Component: 2850  -  total flux cleaned = -0.00335261 Jy
! Component: 2900  -  total flux cleaned = -0.00341326 Jy
! Component: 2950  -  total flux cleaned = -0.00352351 Jy
! Component: 3000  -  total flux cleaned = -0.00357315 Jy
! Component: 3050  -  total flux cleaned = -0.00366197 Jy
! Component: 3100  -  total flux cleaned = -0.0037109 Jy
! Component: 3150  -  total flux cleaned = -0.00376928 Jy
! Component: 3200  -  total flux cleaned = -0.00381761 Jy
! Component: 3250  -  total flux cleaned = -0.00392323 Jy
! Component: 3300  -  total flux cleaned = -0.00399941 Jy
! Component: 3350  -  total flux cleaned = -0.00409396 Jy
! Component: 3400  -  total flux cleaned = -0.00415032 Jy
! Component: 3450  -  total flux cleaned = -0.00425286 Jy
! Component: 3500  -  total flux cleaned = -0.00433611 Jy
! Component: 3550  -  total flux cleaned = -0.00440055 Jy
! Component: 3600  -  total flux cleaned = -0.00447366 Jy
! Component: 3650  -  total flux cleaned = -0.00454626 Jy
! Component: 3700  -  total flux cleaned = -0.00460934 Jy
! Component: 3750  -  total flux cleaned = -0.00470786 Jy
! Component: 3800  -  total flux cleaned = -0.00476112 Jy
! Component: 3850  -  total flux cleaned = -0.00484967 Jy
! Component: 3900  -  total flux cleaned = -0.00492008 Jy
! Component: 3950  -  total flux cleaned = -0.00499868 Jy
! Component: 4000  -  total flux cleaned = -0.00505948 Jy
! Component: 4050  -  total flux cleaned = -0.00510262 Jy
! Total flux subtracted in 4096 components = -0.00518837 Jy
! Clean residual min=-0.000526 max=0.000530 Jy/beam
! Clean residual mean=-0.000003 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0791702 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 460 components and 0.0791702 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0101+0605_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.12 x 13.22 at -17.78 degrees (North through East)
! Clean map  min=-0.0020737  max=0.050519 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0101+0605_S_map.fits
wmodel /image_prod/ug002_uva//J0101+0605_S_map.mod
! Writing 460 model components to file: /image_prod/ug002_uva//J0101+0605_S_map.mod
wobs   /image_prod/ug002_uva//J0101+0605_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0101+0605_S_uvs.fits
wwins  /image_prod/ug002_uva//J0101+0605_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J0101+0605_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0505188 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000167957 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.997394 0.997394 1.99479 3.98958 7.97915 15.9583 31.9166 63.8332
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.05 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  300.783 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0101+0605_S_dfm.log closed on Wed Mar  4 18:46:15 2020