! Started logfile: /image_prod/ug002_uva//J0055-1245_S_dfm.log on Wed Mar  4 18:44:01 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J0055-1245_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J0055-1245_S_uva.fits
! AN table 1: 100 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J0055-1245
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9600 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0055-1245_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003024Jy  sigma=7.544366
! Fit after  self-cal, rms=0.963123Jy  sigma=7.213585
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.097 mas, bmaj=12.35 mas, bpa=9.552 degrees
! Estimated noise=1.55526 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295042 Jy
! Component: 100  -  total flux cleaned = 0.0391067 Jy
! Total flux subtracted in 100 components = 0.0391067 Jy
! Clean residual min=-0.005775 max=0.006332 Jy/beam
! Clean residual mean=-0.000028 rms=0.001665 Jy/beam
! Combined flux in latest and established models = 0.0391067 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0391067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074303Jy  sigma=0.525064
! Fit after  self-cal, rms=0.072789Jy  sigma=0.513301
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.797 mas, bmaj=13.63 mas, bpa=7.534 degrees
! Estimated noise=0.992761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100192 Jy
! Component: 100  -  total flux cleaned = 0.0155321 Jy
! Component: 150  -  total flux cleaned = 0.0190489 Jy
! Component: 200  -  total flux cleaned = 0.0213777 Jy
! Total flux subtracted in 200 components = 0.0213777 Jy
! Clean residual min=-0.006131 max=0.007765 Jy/beam
! Clean residual mean=-0.000020 rms=0.002134 Jy/beam
! Combined flux in latest and established models = 0.0604844 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 63 components and 0.0604843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071701Jy  sigma=0.499470
! Fit after  self-cal, rms=0.071709Jy  sigma=0.498572
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.797 x 13.63 at 7.534 degrees (North through East)
! Clean map  min=-0.0061387  max=0.040215 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.72     HN        1.17     KP        1.30     
!   LA        0.83     NL        1.22     OV        1.72     PT        0.79     
!   SC        1.19     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.74     HN        1.00     KP        1.34     
!   LA        0.78     NL        1.20     OV        1.75     PT        0.83     
!   SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.76     HN        1.08     KP        1.28     
!   LA        0.79     NL        1.40     OV        1.62     PT        0.82     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.071709Jy  sigma=0.498572
! Fit after  self-cal, rms=0.093618Jy  sigma=0.484059
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.97 mas, bmaj=13.93 mas, bpa=8.283 degrees
! Estimated noise=1.03139 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361763 Jy
! Component: 100  -  total flux cleaned = 0.000363913 Jy
! Component: 150  -  total flux cleaned = 0.000292946 Jy
! Component: 200  -  total flux cleaned = 0.000193376 Jy
! Total flux subtracted in 200 components = 0.000193376 Jy
! Clean residual min=-0.004616 max=0.007514 Jy/beam
! Clean residual mean=-0.000010 rms=0.001610 Jy/beam
! Combined flux in latest and established models = 0.0606777 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 70 components and 0.0606777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093557Jy  sigma=0.483905
! Fit after  self-cal, rms=0.095416Jy  sigma=0.479199
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095416Jy  sigma=0.479199
! Fit after  self-cal, rms=0.110093Jy  sigma=0.475978
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.938 mas, bmaj=13.6 mas, bpa=8.267 degrees
! Estimated noise=1.05742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000455065 Jy
! Component: 100  -  total flux cleaned = 0.000428913 Jy
! Component: 150  -  total flux cleaned = 0.000407573 Jy
! Component: 200  -  total flux cleaned = 0.000388658 Jy
! Total flux subtracted in 200 components = 0.000388658 Jy
! Clean residual min=-0.004017 max=0.005348 Jy/beam
! Clean residual mean=0.000006 rms=0.001325 Jy/beam
! Combined flux in latest and established models = 0.0610664 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 76 components and 0.0610664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110073Jy  sigma=0.475892
! Fit after  self-cal, rms=0.110612Jy  sigma=0.475356
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164084 Jy
! Component: 100  -  total flux cleaned = -0.000270888 Jy
! Component: 150  -  total flux cleaned = -0.000324156 Jy
! Component: 200  -  total flux cleaned = -0.000356808 Jy
! Total flux subtracted in 200 components = -0.000356808 Jy
! Clean residual min=-0.004044 max=0.005197 Jy/beam
! Clean residual mean=0.000004 rms=0.001312 Jy/beam
! Combined flux in latest and established models = 0.0607096 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.0607096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110606Jy  sigma=0.475288
! Fit after  self-cal, rms=0.110601Jy  sigma=0.475266
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110601Jy  sigma=0.475266
! Fit after  self-cal, rms=0.113767Jy  sigma=0.475155
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.908 mas, bmaj=13.47 mas, bpa=8.271 degrees
! Estimated noise=1.05467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397627 Jy
! Component: 100  -  total flux cleaned = 0.000362862 Jy
! Component: 150  -  total flux cleaned = 0.000330909 Jy
! Component: 200  -  total flux cleaned = 0.000330816 Jy
! Total flux subtracted in 200 components = 0.000330816 Jy
! Clean residual min=-0.003958 max=0.005076 Jy/beam
! Clean residual mean=0.000006 rms=0.001299 Jy/beam
! Combined flux in latest and established models = 0.0610404 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 89 components and 0.0610404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113760Jy  sigma=0.475082
! Fit after  self-cal, rms=0.113860Jy  sigma=0.474976
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.60954e-05 Jy
! Component: 100  -  total flux cleaned = 1.39462e-06 Jy
! Component: 150  -  total flux cleaned = -3.0504e-05 Jy
! Component: 200  -  total flux cleaned = -5.97158e-05 Jy
! Total flux subtracted in 200 components = -5.97158e-05 Jy
! Clean residual min=-0.003980 max=0.005039 Jy/beam
! Clean residual mean=0.000006 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.0609807 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 90 components and 0.0609807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113854Jy  sigma=0.474923
! Fit after  self-cal, rms=0.113843Jy  sigma=0.474901
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113843Jy  sigma=0.474901
! Fit after  self-cal, rms=0.114960Jy  sigma=0.474878
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.878 mas, bmaj=17.62 mas, bpa=1.569 degrees
! Estimated noise=1.11536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347697 Jy
! Component: 100  -  total flux cleaned = 0.000376069 Jy
! Component: 150  -  total flux cleaned = 0.0004082 Jy
! Component: 200  -  total flux cleaned = 0.00043479 Jy
! Total flux subtracted in 200 components = 0.00043479 Jy
! Clean residual min=-0.005175 max=0.006029 Jy/beam
! Clean residual mean=0.000011 rms=0.001784 Jy/beam
! Combined flux in latest and established models = 0.0614155 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 96 components and 0.0614155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114957Jy  sigma=0.474848
! Fit after  self-cal, rms=0.114989Jy  sigma=0.474820
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.13134e-06 Jy
! Component: 100  -  total flux cleaned = 2.63047e-07 Jy
! Component: 150  -  total flux cleaned = 1.41829e-05 Jy
! Component: 200  -  total flux cleaned = 1.43488e-05 Jy
! Total flux subtracted in 200 components = 1.43488e-05 Jy
! Clean residual min=-0.005172 max=0.006001 Jy/beam
! Clean residual mean=0.000011 rms=0.001777 Jy/beam
! Combined flux in latest and established models = 0.0614298 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.0614298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114988Jy  sigma=0.474808
! Fit after  self-cal, rms=0.114985Jy  sigma=0.474795
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.887 mas, bmaj=13.4 mas, bpa=8.338 degrees
! Estimated noise=1.05298 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.887 x 13.4 at 8.338 degrees (North through East)
! Clean map  min=-0.0039548  max=0.040627 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.037 mas, bmaj=12.02 mas, bpa=10.41 degrees
! Estimated noise=1.71372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0328157 Jy
! Component: 100  -  total flux cleaned = 0.0450611 Jy
! Component: 150  -  total flux cleaned = 0.0515938 Jy
! Component: 200  -  total flux cleaned = 0.0555254 Jy
! Total flux subtracted in 200 components = 0.0555254 Jy
! Clean residual min=-0.004464 max=0.004444 Jy/beam
! Clean residual mean=-0.000001 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.0555254 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.0555254 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.887 mas, bmaj=13.4 mas, bpa=8.338 degrees
! Estimated noise=1.05298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244653 Jy
! Component: 100  -  total flux cleaned = 0.00362869 Jy
! Component: 150  -  total flux cleaned = 0.00398722 Jy
! Component: 200  -  total flux cleaned = 0.00425576 Jy
! Total flux subtracted in 200 components = 0.00425576 Jy
! Clean residual min=-0.004213 max=0.005261 Jy/beam
! Clean residual mean=0.000005 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.0597811 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 41 components and 0.0597811 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.878 mas, bmaj=17.62 mas, bpa=1.569 degrees
! Estimated noise=1.11536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000890538 Jy
! Component: 100  -  total flux cleaned = 0.00106422 Jy
! Component: 150  -  total flux cleaned = 0.0011686 Jy
! Component: 200  -  total flux cleaned = 0.00124166 Jy
! Total flux subtracted in 200 components = 0.00124166 Jy
! Clean residual min=-0.005226 max=0.006043 Jy/beam
! Clean residual mean=0.000010 rms=0.001780 Jy/beam
! Combined flux in latest and established models = 0.0610228 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.35177e-05 Jy
! Component: 100  -  total flux cleaned = 0.000105168 Jy
! Component: 150  -  total flux cleaned = 0.000134927 Jy
! Component: 200  -  total flux cleaned = 0.000162808 Jy
! Total flux subtracted in 200 components = 0.000162808 Jy
! Clean residual min=-0.005201 max=0.006037 Jy/beam
! Clean residual mean=0.000010 rms=0.001779 Jy/beam
! Combined flux in latest and established models = 0.0611856 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.0611856 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.887 mas, bmaj=13.4 mas, bpa=8.338 degrees
! Estimated noise=1.05298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.01895e-05 Jy
! Component: 100  -  total flux cleaned = -0.000114254 Jy
! Component: 150  -  total flux cleaned = -0.000133576 Jy
! Component: 200  -  total flux cleaned = -0.000133832 Jy
! Total flux subtracted in 200 components = -0.000133832 Jy
! Clean residual min=-0.004018 max=0.005166 Jy/beam
! Clean residual mean=0.000006 rms=0.001293 Jy/beam
! Combined flux in latest and established models = 0.0610518 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 0.0610518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115010Jy  sigma=0.475018
! Fit after  self-cal, rms=0.115019Jy  sigma=0.474951
wmodel J0055-1245_S_map.mod
! Writing 62 model components to file: J0055-1245_S_map.mod
wobs   J0055-1245_S_uvs.fits
! Writing UV FITS file: J0055-1245_S_uvs.fits
wwins  J0055-1245_S_map.win
! wwins: Wrote 1 windows to J0055-1245_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217383 Jy
! Component: 100  -  total flux cleaned = 0.00343929 Jy
! Component: 150  -  total flux cleaned = 0.0045847 Jy
! Component: 200  -  total flux cleaned = 0.00533198 Jy
! Component: 250  -  total flux cleaned = 0.00556254 Jy
! Component: 300  -  total flux cleaned = 0.00556397 Jy
! Component: 350  -  total flux cleaned = 0.00566818 Jy
! Component: 400  -  total flux cleaned = 0.00581915 Jy
! Component: 450  -  total flux cleaned = 0.00596462 Jy
! Component: 500  -  total flux cleaned = 0.00619822 Jy
! Component: 550  -  total flux cleaned = 0.00637778 Jy
! Component: 600  -  total flux cleaned = 0.00646487 Jy
! Component: 650  -  total flux cleaned = 0.00654995 Jy
! Component: 700  -  total flux cleaned = 0.00663184 Jy
! Component: 750  -  total flux cleaned = 0.00663125 Jy
! Component: 800  -  total flux cleaned = 0.00663141 Jy
! Component: 850  -  total flux cleaned = 0.00655557 Jy
! Component: 900  -  total flux cleaned = 0.0064456 Jy
! Component: 950  -  total flux cleaned = 0.00630287 Jy
! Component: 1000  -  total flux cleaned = 0.00626716 Jy
! Component: 1050  -  total flux cleaned = 0.00599634 Jy
! Component: 1100  -  total flux cleaned = 0.00586473 Jy
! Component: 1150  -  total flux cleaned = 0.00570366 Jy
! Component: 1200  -  total flux cleaned = 0.00548285 Jy
! Component: 1250  -  total flux cleaned = 0.00529812 Jy
! Component: 1300  -  total flux cleaned = 0.00508669 Jy
! Component: 1350  -  total flux cleaned = 0.00488062 Jy
! Component: 1400  -  total flux cleaned = 0.00473621 Jy
! Component: 1450  -  total flux cleaned = 0.00453734 Jy
! Component: 1500  -  total flux cleaned = 0.00437052 Jy
! Component: 1550  -  total flux cleaned = 0.00415222 Jy
! Component: 1600  -  total flux cleaned = 0.0040449 Jy
! Component: 1650  -  total flux cleaned = 0.00388676 Jy
! Component: 1700  -  total flux cleaned = 0.0036547 Jy
! Component: 1750  -  total flux cleaned = 0.00352799 Jy
! Component: 1800  -  total flux cleaned = 0.00340308 Jy
! Component: 1850  -  total flux cleaned = 0.00325594 Jy
! Component: 1900  -  total flux cleaned = 0.00311151 Jy
! Component: 1950  -  total flux cleaned = 0.00306362 Jy
! Component: 2000  -  total flux cleaned = 0.00283091 Jy
! Component: 2050  -  total flux cleaned = 0.00264778 Jy
! Component: 2100  -  total flux cleaned = 0.0024447 Jy
! Component: 2150  -  total flux cleaned = 0.00228913 Jy
! Component: 2200  -  total flux cleaned = 0.00224514 Jy
! Component: 2250  -  total flux cleaned = 0.00215876 Jy
! Component: 2300  -  total flux cleaned = 0.00213735 Jy
! Component: 2350  -  total flux cleaned = 0.00207377 Jy
! Component: 2400  -  total flux cleaned = 0.00201089 Jy
! Component: 2450  -  total flux cleaned = 0.00188678 Jy
! Component: 2500  -  total flux cleaned = 0.00186652 Jy
! Component: 2550  -  total flux cleaned = 0.00184633 Jy
! Component: 2600  -  total flux cleaned = 0.00184649 Jy
! Component: 2650  -  total flux cleaned = 0.00186645 Jy
! Component: 2700  -  total flux cleaned = 0.00190567 Jy
! Component: 2750  -  total flux cleaned = 0.00188608 Jy
! Component: 2800  -  total flux cleaned = 0.00188599 Jy
! Component: 2850  -  total flux cleaned = 0.00186677 Jy
! Component: 2900  -  total flux cleaned = 0.00182878 Jy
! Component: 2950  -  total flux cleaned = 0.00184754 Jy
! Component: 3000  -  total flux cleaned = 0.00181024 Jy
! Component: 3050  -  total flux cleaned = 0.0017917 Jy
! Component: 3100  -  total flux cleaned = 0.00175482 Jy
! Component: 3150  -  total flux cleaned = 0.00171826 Jy
! Component: 3200  -  total flux cleaned = 0.00171817 Jy
! Component: 3250  -  total flux cleaned = 0.00171814 Jy
! Component: 3300  -  total flux cleaned = 0.00171812 Jy
! Component: 3350  -  total flux cleaned = 0.00170024 Jy
! Component: 3400  -  total flux cleaned = 0.00177111 Jy
! Component: 3450  -  total flux cleaned = 0.00177099 Jy
! Component: 3500  -  total flux cleaned = 0.00178846 Jy
! Component: 3550  -  total flux cleaned = 0.00178855 Jy
! Component: 3600  -  total flux cleaned = 0.00184045 Jy
! Component: 3650  -  total flux cleaned = 0.00192684 Jy
! Component: 3700  -  total flux cleaned = 0.00199577 Jy
! Component: 3750  -  total flux cleaned = 0.00206436 Jy
! Component: 3800  -  total flux cleaned = 0.0021498 Jy
! Component: 3850  -  total flux cleaned = 0.00216688 Jy
! Component: 3900  -  total flux cleaned = 0.00226867 Jy
! Component: 3950  -  total flux cleaned = 0.00231932 Jy
! Component: 4000  -  total flux cleaned = 0.00233623 Jy
! Component: 4050  -  total flux cleaned = 0.00242027 Jy
! Total flux subtracted in 4096 components = 0.00245373 Jy
! Clean residual min=-0.000930 max=0.000980 Jy/beam
! Clean residual mean=-0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0635055 Jy
keep
! Adding 389 model components to the UV plane model.
! The established model now contains 451 components and 0.0635055 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J0055-1245_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.887 x 13.4 at 8.338 degrees (North through East)
! Clean map  min=-0.0031368  max=0.040527 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J0055-1245_S_map.fits
wmodel /image_prod/ug002_uva//J0055-1245_S_map.mod
! Writing 451 model components to file: /image_prod/ug002_uva//J0055-1245_S_map.mod
wobs   /image_prod/ug002_uva//J0055-1245_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J0055-1245_S_uvs.fits
wwins  /image_prod/ug002_uva//J0055-1245_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J0055-1245_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0405267 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000330762 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.44847 2.44847 4.89694 9.79389 19.5878 39.1755 78.3511
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.04 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  122.525 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J0055-1245_S_dfm.log closed on Wed Mar  4 18:44:06 2020